* [PATCH 0/2] media: ov7670: Add entity init and power operation
@ 2017-08-10 9:06 Wenyou Yang
2017-08-10 9:06 ` [PATCH 1/2] media: ov7670: Add entity pads initialization Wenyou Yang
2017-08-10 9:06 ` [PATCH 2/2] media: ov7670: Add the s_power operation Wenyou Yang
0 siblings, 2 replies; 6+ messages in thread
From: Wenyou Yang @ 2017-08-10 9:06 UTC (permalink / raw)
To: Jonathan Corbet
Cc: Nicolas Ferre, linux-kernel, linux-arm-kernel,
Linux Media Mailing List, Mauro Carvalho Chehab, Wenyou Yang
This patch set is to add the media entity pads initialization and add
the s_power operation.
Wenyou Yang (2):
media: ov7670: Add entity pads initialization
media: ov7670: Add the s_power operation
drivers/media/i2c/ov7670.c | 43 +++++++++++++++++++++++++++++++++++++++----
1 file changed, 39 insertions(+), 4 deletions(-)
--
2.13.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] media: ov7670: Add entity pads initialization
2017-08-10 9:06 [PATCH 0/2] media: ov7670: Add entity init and power operation Wenyou Yang
@ 2017-08-10 9:06 ` Wenyou Yang
2017-08-15 16:23 ` Sakari Ailus
2017-08-10 9:06 ` [PATCH 2/2] media: ov7670: Add the s_power operation Wenyou Yang
1 sibling, 1 reply; 6+ messages in thread
From: Wenyou Yang @ 2017-08-10 9:06 UTC (permalink / raw)
To: Jonathan Corbet
Cc: Nicolas Ferre, linux-kernel, linux-arm-kernel,
Linux Media Mailing List, Mauro Carvalho Chehab, Wenyou Yang
Add the media entity pads initialization.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
drivers/media/i2c/ov7670.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index e88549f0e704..5c8460ee65c3 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -213,6 +213,7 @@ struct ov7670_devtype {
struct ov7670_format_struct; /* coming later */
struct ov7670_info {
struct v4l2_subdev sd;
+ struct media_pad pad;
struct v4l2_ctrl_handler hdl;
struct {
/* gain cluster */
@@ -1688,14 +1689,23 @@ static int ov7670_probe(struct i2c_client *client,
v4l2_ctrl_auto_cluster(2, &info->auto_exposure,
V4L2_EXPOSURE_MANUAL, false);
v4l2_ctrl_cluster(2, &info->saturation);
+
+ info->pad.flags = MEDIA_PAD_FL_SOURCE;
+ info->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+ ret = media_entity_pads_init(&info->sd.entity, 1, &info->pad);
+ if (ret < 0)
+ goto hdl_free;
+
v4l2_ctrl_handler_setup(&info->hdl);
ret = v4l2_async_register_subdev(&info->sd);
if (ret < 0)
- goto hdl_free;
+ goto entity_cleanup;
return 0;
+entity_cleanup:
+ media_entity_cleanup(&info->sd.entity);
hdl_free:
v4l2_ctrl_handler_free(&info->hdl);
clk_disable:
@@ -1712,6 +1722,7 @@ static int ov7670_remove(struct i2c_client *client)
v4l2_device_unregister_subdev(sd);
v4l2_ctrl_handler_free(&info->hdl);
clk_disable_unprepare(info->clk);
+ media_entity_cleanup(&info->sd.entity);
return 0;
}
--
2.13.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] media: ov7670: Add the s_power operation
2017-08-10 9:06 [PATCH 0/2] media: ov7670: Add entity init and power operation Wenyou Yang
2017-08-10 9:06 ` [PATCH 1/2] media: ov7670: Add entity pads initialization Wenyou Yang
@ 2017-08-10 9:06 ` Wenyou Yang
2017-08-15 16:36 ` Sakari Ailus
1 sibling, 1 reply; 6+ messages in thread
From: Wenyou Yang @ 2017-08-10 9:06 UTC (permalink / raw)
To: Jonathan Corbet
Cc: Nicolas Ferre, linux-kernel, linux-arm-kernel,
Linux Media Mailing List, Mauro Carvalho Chehab, Wenyou Yang
Add the s_power operation which is responsible for manipulating the
power dowm mode through the PWDN pin and the reset operation through
the RESET pin.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
drivers/media/i2c/ov7670.c | 30 +++++++++++++++++++++++++++---
1 file changed, 27 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index 5c8460ee65c3..5ed79ccfaf91 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -1506,6 +1506,22 @@ static int ov7670_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_regis
}
#endif
+static int ov7670_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct ov7670_info *info = to_state(sd);
+
+ if (info->pwdn_gpio)
+ gpiod_direction_output(info->pwdn_gpio, !on);
+ if (on && info->resetb_gpio) {
+ gpiod_set_value(info->resetb_gpio, 1);
+ usleep_range(500, 1000);
+ gpiod_set_value(info->resetb_gpio, 0);
+ usleep_range(3000, 5000);
+ }
+
+ return 0;
+}
+
/* ----------------------------------------------------------------------- */
static const struct v4l2_subdev_core_ops ov7670_core_ops = {
@@ -1515,6 +1531,7 @@ static const struct v4l2_subdev_core_ops ov7670_core_ops = {
.g_register = ov7670_g_register,
.s_register = ov7670_s_register,
#endif
+ .s_power = ov7670_s_power,
};
static const struct v4l2_subdev_video_ops ov7670_video_ops = {
@@ -1568,8 +1585,6 @@ static int ov7670_init_gpio(struct i2c_client *client, struct ov7670_info *info)
return PTR_ERR(info->resetb_gpio);
}
- usleep_range(3000, 5000);
-
return 0;
}
@@ -1630,13 +1645,19 @@ static int ov7670_probe(struct i2c_client *client,
goto clk_disable;
}
+ ret = ov7670_init_gpio(client, info);
+ if (ret)
+ goto clk_disable;
+
+ ov7670_s_power(sd, 1);
+
/* Make sure it's an ov7670 */
ret = ov7670_detect(sd);
if (ret) {
v4l_dbg(1, debug, client,
"chip found @ 0x%x (%s) is not an ov7670 chip.\n",
client->addr << 1, client->adapter->name);
- goto clk_disable;
+ goto power_off;
}
v4l_info(client, "chip found @ 0x%02x (%s)\n",
client->addr << 1, client->adapter->name);
@@ -1708,6 +1729,8 @@ static int ov7670_probe(struct i2c_client *client,
media_entity_cleanup(&info->sd.entity);
hdl_free:
v4l2_ctrl_handler_free(&info->hdl);
+power_off:
+ ov7670_s_power(sd, 0);
clk_disable:
clk_disable_unprepare(info->clk);
return ret;
@@ -1723,6 +1746,7 @@ static int ov7670_remove(struct i2c_client *client)
v4l2_ctrl_handler_free(&info->hdl);
clk_disable_unprepare(info->clk);
media_entity_cleanup(&info->sd.entity);
+ ov7670_s_power(sd, 0);
return 0;
}
--
2.13.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] media: ov7670: Add entity pads initialization
2017-08-10 9:06 ` [PATCH 1/2] media: ov7670: Add entity pads initialization Wenyou Yang
@ 2017-08-15 16:23 ` Sakari Ailus
2017-08-17 1:38 ` Yang, Wenyou
0 siblings, 1 reply; 6+ messages in thread
From: Sakari Ailus @ 2017-08-15 16:23 UTC (permalink / raw)
To: Wenyou Yang
Cc: Jonathan Corbet, Nicolas Ferre, linux-kernel, linux-arm-kernel,
Linux Media Mailing List, Mauro Carvalho Chehab
Hi Wenyou,
On Thu, Aug 10, 2017 at 05:06:44PM +0800, Wenyou Yang wrote:
> Add the media entity pads initialization.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
The patch itself seems fine. However the driver is lacking support for
get_fmt which I think would be necessary for the user space API to work
properly. Without sub-device nodes it might not have been an issue with
certain master drivers.
Could you add that in v2, in a separate patch before this one, please?
> ---
>
> drivers/media/i2c/ov7670.c | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
> index e88549f0e704..5c8460ee65c3 100644
> --- a/drivers/media/i2c/ov7670.c
> +++ b/drivers/media/i2c/ov7670.c
> @@ -213,6 +213,7 @@ struct ov7670_devtype {
> struct ov7670_format_struct; /* coming later */
> struct ov7670_info {
> struct v4l2_subdev sd;
> + struct media_pad pad;
> struct v4l2_ctrl_handler hdl;
> struct {
> /* gain cluster */
> @@ -1688,14 +1689,23 @@ static int ov7670_probe(struct i2c_client *client,
> v4l2_ctrl_auto_cluster(2, &info->auto_exposure,
> V4L2_EXPOSURE_MANUAL, false);
> v4l2_ctrl_cluster(2, &info->saturation);
> +
> + info->pad.flags = MEDIA_PAD_FL_SOURCE;
> + info->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> + ret = media_entity_pads_init(&info->sd.entity, 1, &info->pad);
> + if (ret < 0)
> + goto hdl_free;
> +
> v4l2_ctrl_handler_setup(&info->hdl);
>
> ret = v4l2_async_register_subdev(&info->sd);
> if (ret < 0)
> - goto hdl_free;
> + goto entity_cleanup;
>
> return 0;
>
> +entity_cleanup:
> + media_entity_cleanup(&info->sd.entity);
> hdl_free:
> v4l2_ctrl_handler_free(&info->hdl);
> clk_disable:
> @@ -1712,6 +1722,7 @@ static int ov7670_remove(struct i2c_client *client)
> v4l2_device_unregister_subdev(sd);
> v4l2_ctrl_handler_free(&info->hdl);
> clk_disable_unprepare(info->clk);
> + media_entity_cleanup(&info->sd.entity);
> return 0;
> }
>
> --
> 2.13.0
>
--
Sakari Ailus
e-mail: sakari.ailus@iki.fi
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] media: ov7670: Add the s_power operation
2017-08-10 9:06 ` [PATCH 2/2] media: ov7670: Add the s_power operation Wenyou Yang
@ 2017-08-15 16:36 ` Sakari Ailus
0 siblings, 0 replies; 6+ messages in thread
From: Sakari Ailus @ 2017-08-15 16:36 UTC (permalink / raw)
To: Wenyou Yang
Cc: Jonathan Corbet, Nicolas Ferre, linux-kernel, linux-arm-kernel,
Linux Media Mailing List, Mauro Carvalho Chehab
Hi Wenyou,
On Thu, Aug 10, 2017 at 05:06:45PM +0800, Wenyou Yang wrote:
> Add the s_power operation which is responsible for manipulating the
> power dowm mode through the PWDN pin and the reset operation through
> the RESET pin.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> ---
>
> drivers/media/i2c/ov7670.c | 30 +++++++++++++++++++++++++++---
> 1 file changed, 27 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
> index 5c8460ee65c3..5ed79ccfaf91 100644
> --- a/drivers/media/i2c/ov7670.c
> +++ b/drivers/media/i2c/ov7670.c
> @@ -1506,6 +1506,22 @@ static int ov7670_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_regis
> }
> #endif
>
> +static int ov7670_s_power(struct v4l2_subdev *sd, int on)
> +{
> + struct ov7670_info *info = to_state(sd);
> +
> + if (info->pwdn_gpio)
> + gpiod_direction_output(info->pwdn_gpio, !on);
gpiod_direction_output() can cope with NULL gpio_desc.
> + if (on && info->resetb_gpio) {
> + gpiod_set_value(info->resetb_gpio, 1);
> + usleep_range(500, 1000);
> + gpiod_set_value(info->resetb_gpio, 0);
> + usleep_range(3000, 5000);
> + }
> +
> + return 0;
> +}
> +
> /* ----------------------------------------------------------------------- */
>
> static const struct v4l2_subdev_core_ops ov7670_core_ops = {
> @@ -1515,6 +1531,7 @@ static const struct v4l2_subdev_core_ops ov7670_core_ops = {
> .g_register = ov7670_g_register,
> .s_register = ov7670_s_register,
> #endif
> + .s_power = ov7670_s_power,
> };
>
> static const struct v4l2_subdev_video_ops ov7670_video_ops = {
> @@ -1568,8 +1585,6 @@ static int ov7670_init_gpio(struct i2c_client *client, struct ov7670_info *info)
> return PTR_ERR(info->resetb_gpio);
> }
>
> - usleep_range(3000, 5000);
> -
> return 0;
> }
>
> @@ -1630,13 +1645,19 @@ static int ov7670_probe(struct i2c_client *client,
> goto clk_disable;
> }
>
> + ret = ov7670_init_gpio(client, info);
ov7670_init_gpio() is already called a few lines above this. Was this
intended?
> + if (ret)
> + goto clk_disable;
> +
> + ov7670_s_power(sd, 1);
> +
> /* Make sure it's an ov7670 */
> ret = ov7670_detect(sd);
> if (ret) {
> v4l_dbg(1, debug, client,
> "chip found @ 0x%x (%s) is not an ov7670 chip.\n",
> client->addr << 1, client->adapter->name);
> - goto clk_disable;
> + goto power_off;
> }
> v4l_info(client, "chip found @ 0x%02x (%s)\n",
> client->addr << 1, client->adapter->name);
> @@ -1708,6 +1729,8 @@ static int ov7670_probe(struct i2c_client *client,
> media_entity_cleanup(&info->sd.entity);
> hdl_free:
> v4l2_ctrl_handler_free(&info->hdl);
> +power_off:
> + ov7670_s_power(sd, 0);
> clk_disable:
> clk_disable_unprepare(info->clk);
> return ret;
> @@ -1723,6 +1746,7 @@ static int ov7670_remove(struct i2c_client *client)
> v4l2_ctrl_handler_free(&info->hdl);
> clk_disable_unprepare(info->clk);
> media_entity_cleanup(&info->sd.entity);
> + ov7670_s_power(sd, 0);
> return 0;
> }
>
--
Sakari Ailus
e-mail: sakari.ailus@iki.fi
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] media: ov7670: Add entity pads initialization
2017-08-15 16:23 ` Sakari Ailus
@ 2017-08-17 1:38 ` Yang, Wenyou
0 siblings, 0 replies; 6+ messages in thread
From: Yang, Wenyou @ 2017-08-17 1:38 UTC (permalink / raw)
To: Sakari Ailus
Cc: Jonathan Corbet, Nicolas Ferre, linux-kernel, linux-arm-kernel,
Linux Media Mailing List, Mauro Carvalho Chehab
Hi Sakari,
On 2017/8/16 0:23, Sakari Ailus wrote:
> Hi Wenyou,
>
> On Thu, Aug 10, 2017 at 05:06:44PM +0800, Wenyou Yang wrote:
>> Add the media entity pads initialization.
>>
>> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> The patch itself seems fine. However the driver is lacking support for
> get_fmt which I think would be necessary for the user space API to work
> properly. Without sub-device nodes it might not have been an issue with
> certain master drivers.
>
> Could you add that in v2, in a separate patch before this one, please?
Okay, I will do.
Thank you for your review.
>
>> ---
>>
>> drivers/media/i2c/ov7670.c | 13 ++++++++++++-
>> 1 file changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
>> index e88549f0e704..5c8460ee65c3 100644
>> --- a/drivers/media/i2c/ov7670.c
>> +++ b/drivers/media/i2c/ov7670.c
>> @@ -213,6 +213,7 @@ struct ov7670_devtype {
>> struct ov7670_format_struct; /* coming later */
>> struct ov7670_info {
>> struct v4l2_subdev sd;
>> + struct media_pad pad;
>> struct v4l2_ctrl_handler hdl;
>> struct {
>> /* gain cluster */
>> @@ -1688,14 +1689,23 @@ static int ov7670_probe(struct i2c_client *client,
>> v4l2_ctrl_auto_cluster(2, &info->auto_exposure,
>> V4L2_EXPOSURE_MANUAL, false);
>> v4l2_ctrl_cluster(2, &info->saturation);
>> +
>> + info->pad.flags = MEDIA_PAD_FL_SOURCE;
>> + info->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
>> + ret = media_entity_pads_init(&info->sd.entity, 1, &info->pad);
>> + if (ret < 0)
>> + goto hdl_free;
>> +
>> v4l2_ctrl_handler_setup(&info->hdl);
>>
>> ret = v4l2_async_register_subdev(&info->sd);
>> if (ret < 0)
>> - goto hdl_free;
>> + goto entity_cleanup;
>>
>> return 0;
>>
>> +entity_cleanup:
>> + media_entity_cleanup(&info->sd.entity);
>> hdl_free:
>> v4l2_ctrl_handler_free(&info->hdl);
>> clk_disable:
>> @@ -1712,6 +1722,7 @@ static int ov7670_remove(struct i2c_client *client)
>> v4l2_device_unregister_subdev(sd);
>> v4l2_ctrl_handler_free(&info->hdl);
>> clk_disable_unprepare(info->clk);
>> + media_entity_cleanup(&info->sd.entity);
>> return 0;
>> }
>>
>> --
>> 2.13.0
>>
Best Regards,
Wenyou Yang
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-08-17 1:38 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-10 9:06 [PATCH 0/2] media: ov7670: Add entity init and power operation Wenyou Yang
2017-08-10 9:06 ` [PATCH 1/2] media: ov7670: Add entity pads initialization Wenyou Yang
2017-08-15 16:23 ` Sakari Ailus
2017-08-17 1:38 ` Yang, Wenyou
2017-08-10 9:06 ` [PATCH 2/2] media: ov7670: Add the s_power operation Wenyou Yang
2017-08-15 16:36 ` Sakari Ailus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).