* Re: [PATCH v2] prctl: Deprecate non PR_SET_MM_MAP operations
2018-04-05 18:26 [PATCH v2] prctl: Deprecate non PR_SET_MM_MAP operations Cyrill Gorcunov
@ 2018-04-05 18:56 ` Michal Hocko
2018-04-05 19:51 ` Cyrill Gorcunov
2018-04-05 18:59 ` Yang Shi
` (2 subsequent siblings)
3 siblings, 1 reply; 18+ messages in thread
From: Michal Hocko @ 2018-04-05 18:56 UTC (permalink / raw)
To: Cyrill Gorcunov
Cc: LKML, Randy Dunlap, Andrey Vagin, Andrew Morton, Pavel Emelyanov,
Michael Kerrisk, Yang Shi
On Thu 05-04-18 21:26:51, Cyrill Gorcunov wrote:
> An ability to manipulate mm_struct fields was introduced in
> sake of CRIU in first place. Later we provide more suitable
> and safe operation PR_SET_MM_MAP where all fields to be modifed
> are passed in one structure which allows us to make more detailed
> verification.
I hope this will serve as a memento for future single-user APIs
proposals. The whole thing was a bad idea since the beginning.
> Still old interface remains present for compatibility reason
> though CRIU itself already switched to PR_SET_MM_MAP on its
> own long ago.
>
> Googling didn't reveal some other users of this operation
> so I think it should be safe to remove this interface.
>
> v2:
> - Improve warning message
> - Drop redundant args check
>
> CC: Andrey Vagin <avagin@openvz.org>
> CC: Andrew Morton <akpm@linuxfoundation.org>
> CC: Pavel Emelyanov <xemul@virtuozzo.com>
> CC: Michael Kerrisk <mtk.manpages@gmail.com>
> CC: Yang Shi <yang.shi@linux.alibaba.com>
> CC: Michal Hocko <mhocko@kernel.org>
> Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
and fingers crossed that we haven't grown other users outside of CRIU
which is quite bound to specific kernels AFAIK.
> ---
> kernel/sys.c | 151 -----------------------------------------------------------
> 1 file changed, 2 insertions(+), 149 deletions(-)
>
> Index: linux-ml.git/kernel/sys.c
> ===================================================================
> --- linux-ml.git.orig/kernel/sys.c
> +++ linux-ml.git/kernel/sys.c
> @@ -2053,163 +2053,16 @@ static int prctl_set_mm_map(int opt, con
> }
> #endif /* CONFIG_CHECKPOINT_RESTORE */
>
> -static int prctl_set_auxv(struct mm_struct *mm, unsigned long addr,
> - unsigned long len)
> -{
> - /*
> - * This doesn't move the auxiliary vector itself since it's pinned to
> - * mm_struct, but it permits filling the vector with new values. It's
> - * up to the caller to provide sane values here, otherwise userspace
> - * tools which use this vector might be unhappy.
> - */
> - unsigned long user_auxv[AT_VECTOR_SIZE];
> -
> - if (len > sizeof(user_auxv))
> - return -EINVAL;
> -
> - if (copy_from_user(user_auxv, (const void __user *)addr, len))
> - return -EFAULT;
> -
> - /* Make sure the last entry is always AT_NULL */
> - user_auxv[AT_VECTOR_SIZE - 2] = 0;
> - user_auxv[AT_VECTOR_SIZE - 1] = 0;
> -
> - BUILD_BUG_ON(sizeof(user_auxv) != sizeof(mm->saved_auxv));
> -
> - task_lock(current);
> - memcpy(mm->saved_auxv, user_auxv, len);
> - task_unlock(current);
> -
> - return 0;
> -}
> -
> static int prctl_set_mm(int opt, unsigned long addr,
> unsigned long arg4, unsigned long arg5)
> {
> - struct mm_struct *mm = current->mm;
> - struct prctl_mm_map prctl_map;
> - struct vm_area_struct *vma;
> - int error;
> -
> - if (arg5 || (arg4 && (opt != PR_SET_MM_AUXV &&
> - opt != PR_SET_MM_MAP &&
> - opt != PR_SET_MM_MAP_SIZE)))
> - return -EINVAL;
> -
> #ifdef CONFIG_CHECKPOINT_RESTORE
> if (opt == PR_SET_MM_MAP || opt == PR_SET_MM_MAP_SIZE)
> return prctl_set_mm_map(opt, (const void __user *)addr, arg4);
> #endif
>
> - if (!capable(CAP_SYS_RESOURCE))
> - return -EPERM;
> -
> - if (opt == PR_SET_MM_EXE_FILE)
> - return prctl_set_mm_exe_file(mm, (unsigned int)addr);
> -
> - if (opt == PR_SET_MM_AUXV)
> - return prctl_set_auxv(mm, addr, arg4);
> -
> - if (addr >= TASK_SIZE || addr < mmap_min_addr)
> - return -EINVAL;
> -
> - error = -EINVAL;
> -
> - down_write(&mm->mmap_sem);
> - vma = find_vma(mm, addr);
> -
> - prctl_map.start_code = mm->start_code;
> - prctl_map.end_code = mm->end_code;
> - prctl_map.start_data = mm->start_data;
> - prctl_map.end_data = mm->end_data;
> - prctl_map.start_brk = mm->start_brk;
> - prctl_map.brk = mm->brk;
> - prctl_map.start_stack = mm->start_stack;
> - prctl_map.arg_start = mm->arg_start;
> - prctl_map.arg_end = mm->arg_end;
> - prctl_map.env_start = mm->env_start;
> - prctl_map.env_end = mm->env_end;
> - prctl_map.auxv = NULL;
> - prctl_map.auxv_size = 0;
> - prctl_map.exe_fd = -1;
> -
> - switch (opt) {
> - case PR_SET_MM_START_CODE:
> - prctl_map.start_code = addr;
> - break;
> - case PR_SET_MM_END_CODE:
> - prctl_map.end_code = addr;
> - break;
> - case PR_SET_MM_START_DATA:
> - prctl_map.start_data = addr;
> - break;
> - case PR_SET_MM_END_DATA:
> - prctl_map.end_data = addr;
> - break;
> - case PR_SET_MM_START_STACK:
> - prctl_map.start_stack = addr;
> - break;
> - case PR_SET_MM_START_BRK:
> - prctl_map.start_brk = addr;
> - break;
> - case PR_SET_MM_BRK:
> - prctl_map.brk = addr;
> - break;
> - case PR_SET_MM_ARG_START:
> - prctl_map.arg_start = addr;
> - break;
> - case PR_SET_MM_ARG_END:
> - prctl_map.arg_end = addr;
> - break;
> - case PR_SET_MM_ENV_START:
> - prctl_map.env_start = addr;
> - break;
> - case PR_SET_MM_ENV_END:
> - prctl_map.env_end = addr;
> - break;
> - default:
> - goto out;
> - }
> -
> - error = validate_prctl_map(&prctl_map);
> - if (error)
> - goto out;
> -
> - switch (opt) {
> - /*
> - * If command line arguments and environment
> - * are placed somewhere else on stack, we can
> - * set them up here, ARG_START/END to setup
> - * command line argumets and ENV_START/END
> - * for environment.
> - */
> - case PR_SET_MM_START_STACK:
> - case PR_SET_MM_ARG_START:
> - case PR_SET_MM_ARG_END:
> - case PR_SET_MM_ENV_START:
> - case PR_SET_MM_ENV_END:
> - if (!vma) {
> - error = -EFAULT;
> - goto out;
> - }
> - }
> -
> - mm->start_code = prctl_map.start_code;
> - mm->end_code = prctl_map.end_code;
> - mm->start_data = prctl_map.start_data;
> - mm->end_data = prctl_map.end_data;
> - mm->start_brk = prctl_map.start_brk;
> - mm->brk = prctl_map.brk;
> - mm->start_stack = prctl_map.start_stack;
> - mm->arg_start = prctl_map.arg_start;
> - mm->arg_end = prctl_map.arg_end;
> - mm->env_start = prctl_map.env_start;
> - mm->env_end = prctl_map.env_end;
> -
> - error = 0;
> -out:
> - up_write(&mm->mmap_sem);
> - return error;
> + pr_warn_once("PR_SET_MM_* has been removed. Use PR_SET_MM_MAP instead\n");
> + return -EINVAL;
> }
>
> #ifdef CONFIG_CHECKPOINT_RESTORE
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v2] prctl: Deprecate non PR_SET_MM_MAP operations
2018-04-05 18:56 ` Michal Hocko
@ 2018-04-05 19:51 ` Cyrill Gorcunov
0 siblings, 0 replies; 18+ messages in thread
From: Cyrill Gorcunov @ 2018-04-05 19:51 UTC (permalink / raw)
To: Michal Hocko
Cc: LKML, Randy Dunlap, Andrey Vagin, Andrew Morton, Pavel Emelyanov,
Michael Kerrisk, Yang Shi
On Thu, Apr 05, 2018 at 08:56:50PM +0200, Michal Hocko wrote:
> On Thu 05-04-18 21:26:51, Cyrill Gorcunov wrote:
> > An ability to manipulate mm_struct fields was introduced in
> > sake of CRIU in first place. Later we provide more suitable
> > and safe operation PR_SET_MM_MAP where all fields to be modifed
> > are passed in one structure which allows us to make more detailed
> > verification.
>
> I hope this will serve as a memento for future single-user APIs
> proposals. The whole thing was a bad idea since the beginning.
It wasn't a bad idea at all, kernel evolves with time and the
first version of the api served as it should (actually a number
of things get involved like user-namespaces, mm reworks and
such things). So no, it wasn't bad. Rather to make it more
suitable we provided a second version of the api.
> > Still old interface remains present for compatibility reason
> > though CRIU itself already switched to PR_SET_MM_MAP on its
> > own long ago.
> >
> > Googling didn't reveal some other users of this operation
> > so I think it should be safe to remove this interface.
> >
> > v2:
> > - Improve warning message
> > - Drop redundant args check
> >
> > CC: Andrey Vagin <avagin@openvz.org>
> > CC: Andrew Morton <akpm@linuxfoundation.org>
> > CC: Pavel Emelyanov <xemul@virtuozzo.com>
> > CC: Michael Kerrisk <mtk.manpages@gmail.com>
> > CC: Yang Shi <yang.shi@linux.alibaba.com>
> > CC: Michal Hocko <mhocko@kernel.org>
> > Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
>
> Acked-by: Michal Hocko <mhocko@suse.com>
>
> and fingers crossed that we haven't grown other users outside of CRIU
> which is quite bound to specific kernels AFAIK.
Surely.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v2] prctl: Deprecate non PR_SET_MM_MAP operations
2018-04-05 18:26 [PATCH v2] prctl: Deprecate non PR_SET_MM_MAP operations Cyrill Gorcunov
2018-04-05 18:56 ` Michal Hocko
@ 2018-04-05 18:59 ` Yang Shi
2018-04-18 22:28 ` Andrew Morton
2018-04-20 2:38 ` [v2] " Sergey Senozhatsky
3 siblings, 0 replies; 18+ messages in thread
From: Yang Shi @ 2018-04-05 18:59 UTC (permalink / raw)
To: Cyrill Gorcunov, LKML
Cc: Michal Hocko, Randy Dunlap, Andrey Vagin, Andrew Morton,
Pavel Emelyanov, Michael Kerrisk
On 4/5/18 11:26 AM, Cyrill Gorcunov wrote:
> An ability to manipulate mm_struct fields was introduced in
> sake of CRIU in first place. Later we provide more suitable
> and safe operation PR_SET_MM_MAP where all fields to be modifed
> are passed in one structure which allows us to make more detailed
> verification.
>
> Still old interface remains present for compatibility reason
> though CRIU itself already switched to PR_SET_MM_MAP on its
> own long ago.
>
> Googling didn't reveal some other users of this operation
> so I think it should be safe to remove this interface.
>
> v2:
> - Improve warning message
> - Drop redundant args check
>
> CC: Andrey Vagin <avagin@openvz.org>
> CC: Andrew Morton <akpm@linuxfoundation.org>
> CC: Pavel Emelyanov <xemul@virtuozzo.com>
> CC: Michael Kerrisk <mtk.manpages@gmail.com>
> CC: Yang Shi <yang.shi@linux.alibaba.com>
> CC: Michal Hocko <mhocko@kernel.org>
> Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
> ---
> kernel/sys.c | 151 -----------------------------------------------------------
> 1 file changed, 2 insertions(+), 149 deletions(-)
>
> Index: linux-ml.git/kernel/sys.c
> ===================================================================
> --- linux-ml.git.orig/kernel/sys.c
> +++ linux-ml.git/kernel/sys.c
> @@ -2053,163 +2053,16 @@ static int prctl_set_mm_map(int opt, con
> }
> #endif /* CONFIG_CHECKPOINT_RESTORE */
>
> -static int prctl_set_auxv(struct mm_struct *mm, unsigned long addr,
> - unsigned long len)
> -{
> - /*
> - * This doesn't move the auxiliary vector itself since it's pinned to
> - * mm_struct, but it permits filling the vector with new values. It's
> - * up to the caller to provide sane values here, otherwise userspace
> - * tools which use this vector might be unhappy.
> - */
> - unsigned long user_auxv[AT_VECTOR_SIZE];
> -
> - if (len > sizeof(user_auxv))
> - return -EINVAL;
> -
> - if (copy_from_user(user_auxv, (const void __user *)addr, len))
> - return -EFAULT;
> -
> - /* Make sure the last entry is always AT_NULL */
> - user_auxv[AT_VECTOR_SIZE - 2] = 0;
> - user_auxv[AT_VECTOR_SIZE - 1] = 0;
> -
> - BUILD_BUG_ON(sizeof(user_auxv) != sizeof(mm->saved_auxv));
> -
> - task_lock(current);
> - memcpy(mm->saved_auxv, user_auxv, len);
> - task_unlock(current);
> -
> - return 0;
> -}
> -
> static int prctl_set_mm(int opt, unsigned long addr,
> unsigned long arg4, unsigned long arg5)
> {
> - struct mm_struct *mm = current->mm;
> - struct prctl_mm_map prctl_map;
> - struct vm_area_struct *vma;
> - int error;
> -
> - if (arg5 || (arg4 && (opt != PR_SET_MM_AUXV &&
> - opt != PR_SET_MM_MAP &&
> - opt != PR_SET_MM_MAP_SIZE)))
> - return -EINVAL;
> -
> #ifdef CONFIG_CHECKPOINT_RESTORE
> if (opt == PR_SET_MM_MAP || opt == PR_SET_MM_MAP_SIZE)
> return prctl_set_mm_map(opt, (const void __user *)addr, arg4);
> #endif
>
> - if (!capable(CAP_SYS_RESOURCE))
> - return -EPERM;
> -
> - if (opt == PR_SET_MM_EXE_FILE)
> - return prctl_set_mm_exe_file(mm, (unsigned int)addr);
> -
> - if (opt == PR_SET_MM_AUXV)
> - return prctl_set_auxv(mm, addr, arg4);
> -
> - if (addr >= TASK_SIZE || addr < mmap_min_addr)
> - return -EINVAL;
> -
> - error = -EINVAL;
> -
> - down_write(&mm->mmap_sem);
> - vma = find_vma(mm, addr);
> -
> - prctl_map.start_code = mm->start_code;
> - prctl_map.end_code = mm->end_code;
> - prctl_map.start_data = mm->start_data;
> - prctl_map.end_data = mm->end_data;
> - prctl_map.start_brk = mm->start_brk;
> - prctl_map.brk = mm->brk;
> - prctl_map.start_stack = mm->start_stack;
> - prctl_map.arg_start = mm->arg_start;
> - prctl_map.arg_end = mm->arg_end;
> - prctl_map.env_start = mm->env_start;
> - prctl_map.env_end = mm->env_end;
> - prctl_map.auxv = NULL;
> - prctl_map.auxv_size = 0;
> - prctl_map.exe_fd = -1;
> -
> - switch (opt) {
> - case PR_SET_MM_START_CODE:
> - prctl_map.start_code = addr;
> - break;
> - case PR_SET_MM_END_CODE:
> - prctl_map.end_code = addr;
> - break;
> - case PR_SET_MM_START_DATA:
> - prctl_map.start_data = addr;
> - break;
> - case PR_SET_MM_END_DATA:
> - prctl_map.end_data = addr;
> - break;
> - case PR_SET_MM_START_STACK:
> - prctl_map.start_stack = addr;
> - break;
> - case PR_SET_MM_START_BRK:
> - prctl_map.start_brk = addr;
> - break;
> - case PR_SET_MM_BRK:
> - prctl_map.brk = addr;
> - break;
> - case PR_SET_MM_ARG_START:
> - prctl_map.arg_start = addr;
> - break;
> - case PR_SET_MM_ARG_END:
> - prctl_map.arg_end = addr;
> - break;
> - case PR_SET_MM_ENV_START:
> - prctl_map.env_start = addr;
> - break;
> - case PR_SET_MM_ENV_END:
> - prctl_map.env_end = addr;
> - break;
> - default:
> - goto out;
> - }
> -
> - error = validate_prctl_map(&prctl_map);
> - if (error)
> - goto out;
> -
> - switch (opt) {
> - /*
> - * If command line arguments and environment
> - * are placed somewhere else on stack, we can
> - * set them up here, ARG_START/END to setup
> - * command line argumets and ENV_START/END
> - * for environment.
> - */
> - case PR_SET_MM_START_STACK:
> - case PR_SET_MM_ARG_START:
> - case PR_SET_MM_ARG_END:
> - case PR_SET_MM_ENV_START:
> - case PR_SET_MM_ENV_END:
> - if (!vma) {
> - error = -EFAULT;
> - goto out;
> - }
> - }
> -
> - mm->start_code = prctl_map.start_code;
> - mm->end_code = prctl_map.end_code;
> - mm->start_data = prctl_map.start_data;
> - mm->end_data = prctl_map.end_data;
> - mm->start_brk = prctl_map.start_brk;
> - mm->brk = prctl_map.brk;
> - mm->start_stack = prctl_map.start_stack;
> - mm->arg_start = prctl_map.arg_start;
> - mm->arg_end = prctl_map.arg_end;
> - mm->env_start = prctl_map.env_start;
> - mm->env_end = prctl_map.env_end;
> -
> - error = 0;
> -out:
> - up_write(&mm->mmap_sem);
> - return error;
> + pr_warn_once("PR_SET_MM_* has been removed. Use PR_SET_MM_MAP instead\n");
> + return -EINVAL;
> }
>
> #ifdef CONFIG_CHECKPOINT_RESTORE
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v2] prctl: Deprecate non PR_SET_MM_MAP operations
2018-04-05 18:26 [PATCH v2] prctl: Deprecate non PR_SET_MM_MAP operations Cyrill Gorcunov
2018-04-05 18:56 ` Michal Hocko
2018-04-05 18:59 ` Yang Shi
@ 2018-04-18 22:28 ` Andrew Morton
2018-04-18 22:42 ` Cyrill Gorcunov
2018-04-20 2:38 ` [v2] " Sergey Senozhatsky
3 siblings, 1 reply; 18+ messages in thread
From: Andrew Morton @ 2018-04-18 22:28 UTC (permalink / raw)
To: Cyrill Gorcunov
Cc: LKML, Michal Hocko, Randy Dunlap, Andrey Vagin, Andrew Morton,
Pavel Emelyanov, Michael Kerrisk, Yang Shi
On Thu, 5 Apr 2018 21:26:51 +0300 Cyrill Gorcunov <gorcunov@gmail.com> wrote:
> Subject: [PATCH v2] prctl: Deprecate non PR_SET_MM_MAP operations
s/Deprecate/remove/ !
> An ability to manipulate mm_struct fields was introduced in
> sake of CRIU in first place. Later we provide more suitable
> and safe operation PR_SET_MM_MAP where all fields to be modifed
> are passed in one structure which allows us to make more detailed
> verification.
>
> Still old interface remains present for compatibility reason
> though CRIU itself already switched to PR_SET_MM_MAP on its
> own long ago.
>
> Googling didn't reveal some other users of this operation
> so I think it should be safe to remove this interface.
It does seem a bit sudden. We could just add a "this interface is
scheduled for removal" warning, then delete the code for real later in
the year. To give people time to migrate or to complain to us.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v2] prctl: Deprecate non PR_SET_MM_MAP operations
2018-04-18 22:28 ` Andrew Morton
@ 2018-04-18 22:42 ` Cyrill Gorcunov
0 siblings, 0 replies; 18+ messages in thread
From: Cyrill Gorcunov @ 2018-04-18 22:42 UTC (permalink / raw)
To: Andrew Morton
Cc: LKML, Michal Hocko, Randy Dunlap, Andrey Vagin, Andrew Morton,
Pavel Emelyanov, Michael Kerrisk, Yang Shi
On Wed, Apr 18, 2018 at 03:28:20PM -0700, Andrew Morton wrote:
> On Thu, 5 Apr 2018 21:26:51 +0300 Cyrill Gorcunov <gorcunov@gmail.com> wrote:
>
> > Subject: [PATCH v2] prctl: Deprecate non PR_SET_MM_MAP operations
>
> s/Deprecate/remove/ !
Thanks!
> >
> > Googling didn't reveal some other users of this operation
> > so I think it should be safe to remove this interface.
>
> It does seem a bit sudden. We could just add a "this interface is
> scheduled for removal" warning, then delete the code for real later in
> the year. To give people time to migrate or to complain to us.
Yes, I remember this rule of deprecation but taking into account
how special this code is (and I spent significant amount of time
trying to find a real example of its usage outside of criu)
I think it should be safe to simply remove it. Surely I won't
ever do this with some common syscall.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [v2] prctl: Deprecate non PR_SET_MM_MAP operations
2018-04-05 18:26 [PATCH v2] prctl: Deprecate non PR_SET_MM_MAP operations Cyrill Gorcunov
` (2 preceding siblings ...)
2018-04-18 22:28 ` Andrew Morton
@ 2018-04-20 2:38 ` Sergey Senozhatsky
2018-04-20 7:02 ` Cyrill Gorcunov
3 siblings, 1 reply; 18+ messages in thread
From: Sergey Senozhatsky @ 2018-04-20 2:38 UTC (permalink / raw)
To: Cyrill Gorcunov
Cc: LKML, Michal Hocko, Randy Dunlap, Andrey Vagin, Andrew Morton,
Pavel Emelyanov, Michael Kerrisk, Yang Shi
On (04/05/18 21:26), Cyrill Gorcunov wrote:
[..]
> -
> #ifdef CONFIG_CHECKPOINT_RESTORE
> if (opt == PR_SET_MM_MAP || opt == PR_SET_MM_MAP_SIZE)
> return prctl_set_mm_map(opt, (const void __user *)addr, arg4);
> #endif
>
> - if (!capable(CAP_SYS_RESOURCE))
> - return -EPERM;
> -
> - if (opt == PR_SET_MM_EXE_FILE)
> - return prctl_set_mm_exe_file(mm, (unsigned int)addr);
> -
> - if (opt == PR_SET_MM_AUXV)
> - return prctl_set_auxv(mm, addr, arg4);
Then validate_prctl_map() and prctl_set_mm_exe_file() can be moved
under CONFIG_CHECKPOINT_RESTORE ifdef.
---
kernel/sys.c | 126 +++++++++++++++++++++++++++++------------------------------
1 file changed, 63 insertions(+), 63 deletions(-)
diff --git a/kernel/sys.c b/kernel/sys.c
index 6bdffe264303..86e5ef1a5612 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1815,68 +1815,7 @@ SYSCALL_DEFINE1(umask, int, mask)
return mask;
}
-static int prctl_set_mm_exe_file(struct mm_struct *mm, unsigned int fd)
-{
- struct fd exe;
- struct file *old_exe, *exe_file;
- struct inode *inode;
- int err;
-
- exe = fdget(fd);
- if (!exe.file)
- return -EBADF;
-
- inode = file_inode(exe.file);
-
- /*
- * Because the original mm->exe_file points to executable file, make
- * sure that this one is executable as well, to avoid breaking an
- * overall picture.
- */
- err = -EACCES;
- if (!S_ISREG(inode->i_mode) || path_noexec(&exe.file->f_path))
- goto exit;
-
- err = inode_permission(inode, MAY_EXEC);
- if (err)
- goto exit;
-
- /*
- * Forbid mm->exe_file change if old file still mapped.
- */
- exe_file = get_mm_exe_file(mm);
- err = -EBUSY;
- if (exe_file) {
- struct vm_area_struct *vma;
-
- down_read(&mm->mmap_sem);
- for (vma = mm->mmap; vma; vma = vma->vm_next) {
- if (!vma->vm_file)
- continue;
- if (path_equal(&vma->vm_file->f_path,
- &exe_file->f_path))
- goto exit_err;
- }
-
- up_read(&mm->mmap_sem);
- fput(exe_file);
- }
-
- err = 0;
- /* set the new file, lockless */
- get_file(exe.file);
- old_exe = xchg(&mm->exe_file, exe.file);
- if (old_exe)
- fput(old_exe);
-exit:
- fdput(exe);
- return err;
-exit_err:
- up_read(&mm->mmap_sem);
- fput(exe_file);
- goto exit;
-}
-
+#ifdef CONFIG_CHECKPOINT_RESTORE
/*
* WARNING: we don't require any capability here so be very careful
* in what is allowed for modification from userspace.
@@ -1968,7 +1907,68 @@ static int validate_prctl_map(struct prctl_mm_map *prctl_map)
return error;
}
-#ifdef CONFIG_CHECKPOINT_RESTORE
+static int prctl_set_mm_exe_file(struct mm_struct *mm, unsigned int fd)
+{
+ struct fd exe;
+ struct file *old_exe, *exe_file;
+ struct inode *inode;
+ int err;
+
+ exe = fdget(fd);
+ if (!exe.file)
+ return -EBADF;
+
+ inode = file_inode(exe.file);
+
+ /*
+ * Because the original mm->exe_file points to executable file, make
+ * sure that this one is executable as well, to avoid breaking an
+ * overall picture.
+ */
+ err = -EACCES;
+ if (!S_ISREG(inode->i_mode) || path_noexec(&exe.file->f_path))
+ goto exit;
+
+ err = inode_permission(inode, MAY_EXEC);
+ if (err)
+ goto exit;
+
+ /*
+ * Forbid mm->exe_file change if old file still mapped.
+ */
+ exe_file = get_mm_exe_file(mm);
+ err = -EBUSY;
+ if (exe_file) {
+ struct vm_area_struct *vma;
+
+ down_read(&mm->mmap_sem);
+ for (vma = mm->mmap; vma; vma = vma->vm_next) {
+ if (!vma->vm_file)
+ continue;
+ if (path_equal(&vma->vm_file->f_path,
+ &exe_file->f_path))
+ goto exit_err;
+ }
+
+ up_read(&mm->mmap_sem);
+ fput(exe_file);
+ }
+
+ err = 0;
+ /* set the new file, lockless */
+ get_file(exe.file);
+ old_exe = xchg(&mm->exe_file, exe.file);
+ if (old_exe)
+ fput(old_exe);
+exit:
+ fdput(exe);
+ return err;
+exit_err:
+ up_read(&mm->mmap_sem);
+ fput(exe_file);
+ goto exit;
+}
+
static int prctl_set_mm_map(int opt, const void __user *addr, unsigned long data_size)
{
struct prctl_mm_map prctl_map = { .exe_fd = (u32)-1, };
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [v2] prctl: Deprecate non PR_SET_MM_MAP operations
2018-04-20 2:38 ` [v2] " Sergey Senozhatsky
@ 2018-04-20 7:02 ` Cyrill Gorcunov
2018-04-20 7:29 ` Sergey Senozhatsky
0 siblings, 1 reply; 18+ messages in thread
From: Cyrill Gorcunov @ 2018-04-20 7:02 UTC (permalink / raw)
To: Sergey Senozhatsky
Cc: LKML, Michal Hocko, Randy Dunlap, Andrey Vagin, Andrew Morton,
Pavel Emelyanov, Michael Kerrisk, Yang Shi
On Fri, Apr 20, 2018 at 11:38:09AM +0900, Sergey Senozhatsky wrote:
> On (04/05/18 21:26), Cyrill Gorcunov wrote:
> [..]
> > -
> > #ifdef CONFIG_CHECKPOINT_RESTORE
> > if (opt == PR_SET_MM_MAP || opt == PR_SET_MM_MAP_SIZE)
> > return prctl_set_mm_map(opt, (const void __user *)addr, arg4);
> > #endif
> >
> > - if (!capable(CAP_SYS_RESOURCE))
> > - return -EPERM;
> > -
> > - if (opt == PR_SET_MM_EXE_FILE)
> > - return prctl_set_mm_exe_file(mm, (unsigned int)addr);
> > -
> > - if (opt == PR_SET_MM_AUXV)
> > - return prctl_set_auxv(mm, addr, arg4);
>
> Then validate_prctl_map() and prctl_set_mm_exe_file() can be moved
> under CONFIG_CHECKPOINT_RESTORE ifdef.
I don't mind. Could you please make the patch on top of linux-next?
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [v2] prctl: Deprecate non PR_SET_MM_MAP operations
2018-04-20 7:02 ` Cyrill Gorcunov
@ 2018-04-20 7:29 ` Sergey Senozhatsky
2018-04-20 8:18 ` Cyrill Gorcunov
` (2 more replies)
0 siblings, 3 replies; 18+ messages in thread
From: Sergey Senozhatsky @ 2018-04-20 7:29 UTC (permalink / raw)
To: Cyrill Gorcunov
Cc: Sergey Senozhatsky, LKML, Michal Hocko, Randy Dunlap,
Andrey Vagin, Andrew Morton, Pavel Emelyanov, Michael Kerrisk,
Yang Shi
On (04/20/18 10:02), Cyrill Gorcunov wrote:
> On Fri, Apr 20, 2018 at 11:38:09AM +0900, Sergey Senozhatsky wrote:
> > On (04/05/18 21:26), Cyrill Gorcunov wrote:
> > [..]
> > > -
> > > #ifdef CONFIG_CHECKPOINT_RESTORE
> > > if (opt == PR_SET_MM_MAP || opt == PR_SET_MM_MAP_SIZE)
> > > return prctl_set_mm_map(opt, (const void __user *)addr, arg4);
> > > #endif
> > >
> > > - if (!capable(CAP_SYS_RESOURCE))
> > > - return -EPERM;
> > > -
> > > - if (opt == PR_SET_MM_EXE_FILE)
> > > - return prctl_set_mm_exe_file(mm, (unsigned int)addr);
> > > -
> > > - if (opt == PR_SET_MM_AUXV)
> > > - return prctl_set_auxv(mm, addr, arg4);
> >
> > Then validate_prctl_map() and prctl_set_mm_exe_file() can be moved
> > under CONFIG_CHECKPOINT_RESTORE ifdef.
>
> I don't mind. Could you please make the patch on top of linux-next?
As far as I can see, it's not in linux-next yet. So the following is
against the mmots tree. I wouldn't mind it if we could just squash the
patches.
=======================================================================
From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Subject: [PATCH] prctl: Don't compile some of prctl functions when CRUI
disabled
CHECKPOINT_RESTORE is the only user of validate_prctl_map()
and prctl_set_mm_exe_file(), so we can move those two under
CONFIG_CHECKPOINT_RESTORE.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
---
kernel/sys.c | 126 +++++++++++++++++++++++++--------------------------
1 file changed, 63 insertions(+), 63 deletions(-)
diff --git a/kernel/sys.c b/kernel/sys.c
index 6bdffe264303..86e5ef1a5612 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1815,68 +1815,7 @@ SYSCALL_DEFINE1(umask, int, mask)
return mask;
}
-static int prctl_set_mm_exe_file(struct mm_struct *mm, unsigned int fd)
-{
- struct fd exe;
- struct file *old_exe, *exe_file;
- struct inode *inode;
- int err;
-
- exe = fdget(fd);
- if (!exe.file)
- return -EBADF;
-
- inode = file_inode(exe.file);
-
- /*
- * Because the original mm->exe_file points to executable file, make
- * sure that this one is executable as well, to avoid breaking an
- * overall picture.
- */
- err = -EACCES;
- if (!S_ISREG(inode->i_mode) || path_noexec(&exe.file->f_path))
- goto exit;
-
- err = inode_permission(inode, MAY_EXEC);
- if (err)
- goto exit;
-
- /*
- * Forbid mm->exe_file change if old file still mapped.
- */
- exe_file = get_mm_exe_file(mm);
- err = -EBUSY;
- if (exe_file) {
- struct vm_area_struct *vma;
-
- down_read(&mm->mmap_sem);
- for (vma = mm->mmap; vma; vma = vma->vm_next) {
- if (!vma->vm_file)
- continue;
- if (path_equal(&vma->vm_file->f_path,
- &exe_file->f_path))
- goto exit_err;
- }
-
- up_read(&mm->mmap_sem);
- fput(exe_file);
- }
-
- err = 0;
- /* set the new file, lockless */
- get_file(exe.file);
- old_exe = xchg(&mm->exe_file, exe.file);
- if (old_exe)
- fput(old_exe);
-exit:
- fdput(exe);
- return err;
-exit_err:
- up_read(&mm->mmap_sem);
- fput(exe_file);
- goto exit;
-}
-
+#ifdef CONFIG_CHECKPOINT_RESTORE
/*
* WARNING: we don't require any capability here so be very careful
* in what is allowed for modification from userspace.
@@ -1968,7 +1907,68 @@ static int validate_prctl_map(struct prctl_mm_map *prctl_map)
return error;
}
-#ifdef CONFIG_CHECKPOINT_RESTORE
+static int prctl_set_mm_exe_file(struct mm_struct *mm, unsigned int fd)
+{
+ struct fd exe;
+ struct file *old_exe, *exe_file;
+ struct inode *inode;
+ int err;
+
+ exe = fdget(fd);
+ if (!exe.file)
+ return -EBADF;
+
+ inode = file_inode(exe.file);
+
+ /*
+ * Because the original mm->exe_file points to executable file, make
+ * sure that this one is executable as well, to avoid breaking an
+ * overall picture.
+ */
+ err = -EACCES;
+ if (!S_ISREG(inode->i_mode) || path_noexec(&exe.file->f_path))
+ goto exit;
+
+ err = inode_permission(inode, MAY_EXEC);
+ if (err)
+ goto exit;
+
+ /*
+ * Forbid mm->exe_file change if old file still mapped.
+ */
+ exe_file = get_mm_exe_file(mm);
+ err = -EBUSY;
+ if (exe_file) {
+ struct vm_area_struct *vma;
+
+ down_read(&mm->mmap_sem);
+ for (vma = mm->mmap; vma; vma = vma->vm_next) {
+ if (!vma->vm_file)
+ continue;
+ if (path_equal(&vma->vm_file->f_path,
+ &exe_file->f_path))
+ goto exit_err;
+ }
+
+ up_read(&mm->mmap_sem);
+ fput(exe_file);
+ }
+
+ err = 0;
+ /* set the new file, lockless */
+ get_file(exe.file);
+ old_exe = xchg(&mm->exe_file, exe.file);
+ if (old_exe)
+ fput(old_exe);
+exit:
+ fdput(exe);
+ return err;
+exit_err:
+ up_read(&mm->mmap_sem);
+ fput(exe_file);
+ goto exit;
+}
+
static int prctl_set_mm_map(int opt, const void __user *addr, unsigned long data_size)
{
struct prctl_mm_map prctl_map = { .exe_fd = (u32)-1, };
--
2.17.0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [v2] prctl: Deprecate non PR_SET_MM_MAP operations
2018-04-20 7:29 ` Sergey Senozhatsky
@ 2018-04-20 8:18 ` Cyrill Gorcunov
2018-04-20 20:37 ` [PATCH] prctl: Don't compile some of prctl functions when CRUI kbuild test robot
2018-04-20 21:43 ` kbuild test robot
2 siblings, 0 replies; 18+ messages in thread
From: Cyrill Gorcunov @ 2018-04-20 8:18 UTC (permalink / raw)
To: Sergey Senozhatsky
Cc: LKML, Michal Hocko, Randy Dunlap, Andrey Vagin, Andrew Morton,
Pavel Emelyanov, Michael Kerrisk, Yang Shi
On Fri, Apr 20, 2018 at 04:29:03PM +0900, Sergey Senozhatsky wrote:
> >
> > I don't mind. Could you please make the patch on top of linux-next?
>
> As far as I can see, it's not in linux-next yet. So the following is
> against the mmots tree. I wouldn't mind it if we could just squash the
> patches.
>
> =======================================================================
>
> From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
> Subject: [PATCH] prctl: Don't compile some of prctl functions when CRUI
> disabled
>
> CHECKPOINT_RESTORE is the only user of validate_prctl_map()
> and prctl_set_mm_exe_file(), so we can move those two under
> CONFIG_CHECKPOINT_RESTORE.
>
> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Thanks a lot, Sergey!
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH] prctl: Don't compile some of prctl functions when CRUI
2018-04-20 7:29 ` Sergey Senozhatsky
2018-04-20 8:18 ` Cyrill Gorcunov
@ 2018-04-20 20:37 ` kbuild test robot
2018-04-20 21:00 ` Andrew Morton
2018-04-20 21:43 ` kbuild test robot
2 siblings, 1 reply; 18+ messages in thread
From: kbuild test robot @ 2018-04-20 20:37 UTC (permalink / raw)
To: Sergey Senozhatsky
Cc: kbuild-all, Cyrill Gorcunov, Sergey Senozhatsky, LKML,
Michal Hocko, Randy Dunlap, Andrey Vagin, Andrew Morton,
Pavel Emelyanov, Michael Kerrisk, Yang Shi
[-- Attachment #1: Type: text/plain, Size: 9159 bytes --]
Hi Sergey,
I love your patch! Yet something to improve:
[auto build test ERROR on linus/master]
[also build test ERROR on v4.17-rc1 next-20180420]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Sergey-Senozhatsky/prctl-Don-t-compile-some-of-prctl-functions-when-CRUI/20180421-040826
config: i386-tinyconfig (attached as .config)
compiler: gcc-7 (Debian 7.3.0-16) 7.3.0
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All errors (new ones prefixed by >>):
kernel/sys.c: In function 'prctl_set_mm':
>> kernel/sys.c:2108:10: error: implicit declaration of function 'prctl_set_mm_exe_file'; did you mean 'set_mm_exe_file'? [-Werror=implicit-function-declaration]
return prctl_set_mm_exe_file(mm, (unsigned int)addr);
^~~~~~~~~~~~~~~~~~~~~
set_mm_exe_file
>> kernel/sys.c:2174:10: error: implicit declaration of function 'validate_prctl_map'; did you mean 'validate_creds'? [-Werror=implicit-function-declaration]
error = validate_prctl_map(&prctl_map);
^~~~~~~~~~~~~~~~~~
validate_creds
cc1: some warnings being treated as errors
vim +2108 kernel/sys.c
f606b77f1 Cyrill Gorcunov 2014-10-09 2103
79f0713d4 Cyrill Gorcunov 2012-03-15 2104 if (!capable(CAP_SYS_RESOURCE))
028ee4be3 Cyrill Gorcunov 2012-01-12 2105 return -EPERM;
028ee4be3 Cyrill Gorcunov 2012-01-12 2106
6e399cd14 Davidlohr Bueso 2015-04-16 2107 if (opt == PR_SET_MM_EXE_FILE)
6e399cd14 Davidlohr Bueso 2015-04-16 @2108 return prctl_set_mm_exe_file(mm, (unsigned int)addr);
b32dfe377 Cyrill Gorcunov 2012-05-31 2109
4a00e9df2 Alexey Dobriyan 2015-06-25 2110 if (opt == PR_SET_MM_AUXV)
4a00e9df2 Alexey Dobriyan 2015-06-25 2111 return prctl_set_auxv(mm, addr, arg4);
4a00e9df2 Alexey Dobriyan 2015-06-25 2112
1ad75b9e1 Cyrill Gorcunov 2012-06-07 2113 if (addr >= TASK_SIZE || addr < mmap_min_addr)
028ee4be3 Cyrill Gorcunov 2012-01-12 2114 return -EINVAL;
028ee4be3 Cyrill Gorcunov 2012-01-12 2115
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2116 error = -EINVAL;
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2117
ddf1d398e Mateusz Guzik 2016-01-20 2118 down_write(&mm->mmap_sem);
028ee4be3 Cyrill Gorcunov 2012-01-12 2119 vma = find_vma(mm, addr);
028ee4be3 Cyrill Gorcunov 2012-01-12 2120
4a00e9df2 Alexey Dobriyan 2015-06-25 2121 prctl_map.start_code = mm->start_code;
4a00e9df2 Alexey Dobriyan 2015-06-25 2122 prctl_map.end_code = mm->end_code;
4a00e9df2 Alexey Dobriyan 2015-06-25 2123 prctl_map.start_data = mm->start_data;
4a00e9df2 Alexey Dobriyan 2015-06-25 2124 prctl_map.end_data = mm->end_data;
4a00e9df2 Alexey Dobriyan 2015-06-25 2125 prctl_map.start_brk = mm->start_brk;
4a00e9df2 Alexey Dobriyan 2015-06-25 2126 prctl_map.brk = mm->brk;
4a00e9df2 Alexey Dobriyan 2015-06-25 2127 prctl_map.start_stack = mm->start_stack;
4a00e9df2 Alexey Dobriyan 2015-06-25 2128 prctl_map.arg_start = mm->arg_start;
4a00e9df2 Alexey Dobriyan 2015-06-25 2129 prctl_map.arg_end = mm->arg_end;
4a00e9df2 Alexey Dobriyan 2015-06-25 2130 prctl_map.env_start = mm->env_start;
4a00e9df2 Alexey Dobriyan 2015-06-25 2131 prctl_map.env_end = mm->env_end;
4a00e9df2 Alexey Dobriyan 2015-06-25 2132 prctl_map.auxv = NULL;
4a00e9df2 Alexey Dobriyan 2015-06-25 2133 prctl_map.auxv_size = 0;
4a00e9df2 Alexey Dobriyan 2015-06-25 2134 prctl_map.exe_fd = -1;
4a00e9df2 Alexey Dobriyan 2015-06-25 2135
028ee4be3 Cyrill Gorcunov 2012-01-12 2136 switch (opt) {
028ee4be3 Cyrill Gorcunov 2012-01-12 2137 case PR_SET_MM_START_CODE:
4a00e9df2 Alexey Dobriyan 2015-06-25 2138 prctl_map.start_code = addr;
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2139 break;
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2140 case PR_SET_MM_END_CODE:
4a00e9df2 Alexey Dobriyan 2015-06-25 2141 prctl_map.end_code = addr;
028ee4be3 Cyrill Gorcunov 2012-01-12 2142 break;
028ee4be3 Cyrill Gorcunov 2012-01-12 2143 case PR_SET_MM_START_DATA:
4a00e9df2 Alexey Dobriyan 2015-06-25 2144 prctl_map.start_data = addr;
028ee4be3 Cyrill Gorcunov 2012-01-12 2145 break;
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2146 case PR_SET_MM_END_DATA:
4a00e9df2 Alexey Dobriyan 2015-06-25 2147 prctl_map.end_data = addr;
4a00e9df2 Alexey Dobriyan 2015-06-25 2148 break;
4a00e9df2 Alexey Dobriyan 2015-06-25 2149 case PR_SET_MM_START_STACK:
4a00e9df2 Alexey Dobriyan 2015-06-25 2150 prctl_map.start_stack = addr;
028ee4be3 Cyrill Gorcunov 2012-01-12 2151 break;
028ee4be3 Cyrill Gorcunov 2012-01-12 2152 case PR_SET_MM_START_BRK:
4a00e9df2 Alexey Dobriyan 2015-06-25 2153 prctl_map.start_brk = addr;
028ee4be3 Cyrill Gorcunov 2012-01-12 2154 break;
028ee4be3 Cyrill Gorcunov 2012-01-12 2155 case PR_SET_MM_BRK:
4a00e9df2 Alexey Dobriyan 2015-06-25 2156 prctl_map.brk = addr;
4a00e9df2 Alexey Dobriyan 2015-06-25 2157 break;
4a00e9df2 Alexey Dobriyan 2015-06-25 2158 case PR_SET_MM_ARG_START:
4a00e9df2 Alexey Dobriyan 2015-06-25 2159 prctl_map.arg_start = addr;
4a00e9df2 Alexey Dobriyan 2015-06-25 2160 break;
4a00e9df2 Alexey Dobriyan 2015-06-25 2161 case PR_SET_MM_ARG_END:
4a00e9df2 Alexey Dobriyan 2015-06-25 2162 prctl_map.arg_end = addr;
4a00e9df2 Alexey Dobriyan 2015-06-25 2163 break;
4a00e9df2 Alexey Dobriyan 2015-06-25 2164 case PR_SET_MM_ENV_START:
4a00e9df2 Alexey Dobriyan 2015-06-25 2165 prctl_map.env_start = addr;
4a00e9df2 Alexey Dobriyan 2015-06-25 2166 break;
4a00e9df2 Alexey Dobriyan 2015-06-25 2167 case PR_SET_MM_ENV_END:
4a00e9df2 Alexey Dobriyan 2015-06-25 2168 prctl_map.env_end = addr;
4a00e9df2 Alexey Dobriyan 2015-06-25 2169 break;
4a00e9df2 Alexey Dobriyan 2015-06-25 2170 default:
028ee4be3 Cyrill Gorcunov 2012-01-12 2171 goto out;
4a00e9df2 Alexey Dobriyan 2015-06-25 2172 }
028ee4be3 Cyrill Gorcunov 2012-01-12 2173
4a00e9df2 Alexey Dobriyan 2015-06-25 @2174 error = validate_prctl_map(&prctl_map);
4a00e9df2 Alexey Dobriyan 2015-06-25 2175 if (error)
028ee4be3 Cyrill Gorcunov 2012-01-12 2176 goto out;
028ee4be3 Cyrill Gorcunov 2012-01-12 2177
4a00e9df2 Alexey Dobriyan 2015-06-25 2178 switch (opt) {
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2179 /*
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2180 * If command line arguments and environment
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2181 * are placed somewhere else on stack, we can
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2182 * set them up here, ARG_START/END to setup
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2183 * command line argumets and ENV_START/END
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2184 * for environment.
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2185 */
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2186 case PR_SET_MM_START_STACK:
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2187 case PR_SET_MM_ARG_START:
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2188 case PR_SET_MM_ARG_END:
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2189 case PR_SET_MM_ENV_START:
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2190 case PR_SET_MM_ENV_END:
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2191 if (!vma) {
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2192 error = -EFAULT;
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2193 goto out;
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2194 }
028ee4be3 Cyrill Gorcunov 2012-01-12 2195 }
028ee4be3 Cyrill Gorcunov 2012-01-12 2196
4a00e9df2 Alexey Dobriyan 2015-06-25 2197 mm->start_code = prctl_map.start_code;
4a00e9df2 Alexey Dobriyan 2015-06-25 2198 mm->end_code = prctl_map.end_code;
4a00e9df2 Alexey Dobriyan 2015-06-25 2199 mm->start_data = prctl_map.start_data;
4a00e9df2 Alexey Dobriyan 2015-06-25 2200 mm->end_data = prctl_map.end_data;
4a00e9df2 Alexey Dobriyan 2015-06-25 2201 mm->start_brk = prctl_map.start_brk;
4a00e9df2 Alexey Dobriyan 2015-06-25 2202 mm->brk = prctl_map.brk;
4a00e9df2 Alexey Dobriyan 2015-06-25 2203 mm->start_stack = prctl_map.start_stack;
4a00e9df2 Alexey Dobriyan 2015-06-25 2204 mm->arg_start = prctl_map.arg_start;
4a00e9df2 Alexey Dobriyan 2015-06-25 2205 mm->arg_end = prctl_map.arg_end;
4a00e9df2 Alexey Dobriyan 2015-06-25 2206 mm->env_start = prctl_map.env_start;
4a00e9df2 Alexey Dobriyan 2015-06-25 2207 mm->env_end = prctl_map.env_end;
4a00e9df2 Alexey Dobriyan 2015-06-25 2208
028ee4be3 Cyrill Gorcunov 2012-01-12 2209 error = 0;
028ee4be3 Cyrill Gorcunov 2012-01-12 2210 out:
ddf1d398e Mateusz Guzik 2016-01-20 2211 up_write(&mm->mmap_sem);
028ee4be3 Cyrill Gorcunov 2012-01-12 2212 return error;
028ee4be3 Cyrill Gorcunov 2012-01-12 2213 }
300f786b2 Cyrill Gorcunov 2012-06-07 2214
:::::: The code at line 2108 was first introduced by commit
:::::: 6e399cd144d8500ffb5d40fa6848890e2580a80a prctl: avoid using mmap_sem for exe_file serialization
:::::: TO: Davidlohr Bueso <dave@stgolabs.net>
:::::: CC: Linus Torvalds <torvalds@linux-foundation.org>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 6293 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH] prctl: Don't compile some of prctl functions when CRUI
2018-04-20 20:37 ` [PATCH] prctl: Don't compile some of prctl functions when CRUI kbuild test robot
@ 2018-04-20 21:00 ` Andrew Morton
2019-04-17 12:23 ` Michal Koutný
0 siblings, 1 reply; 18+ messages in thread
From: Andrew Morton @ 2018-04-20 21:00 UTC (permalink / raw)
To: kbuild test robot
Cc: Sergey Senozhatsky, kbuild-all, Cyrill Gorcunov, LKML,
Michal Hocko, Randy Dunlap, Andrey Vagin, Andrew Morton,
Pavel Emelyanov, Michael Kerrisk, Yang Shi
On Sat, 21 Apr 2018 04:37:41 +0800 kbuild test robot <lkp@intel.com> wrote:
> I love your patch! Yet something to improve:
>
> [auto build test ERROR on linus/master]
> [also build test ERROR on v4.17-rc1 next-20180420]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
>
> url: https://github.com/0day-ci/linux/commits/Sergey-Senozhatsky/prctl-Don-t-compile-some-of-prctl-functions-when-CRUI/20180421-040826
> config: i386-tinyconfig (attached as .config)
> compiler: gcc-7 (Debian 7.3.0-16) 7.3.0
> reproduce:
> # save the attached .config to linux build tree
> make ARCH=i386
>
> All errors (new ones prefixed by >>):
>
> kernel/sys.c: In function 'prctl_set_mm':
> >> kernel/sys.c:2108:10: error: implicit declaration of function 'prctl_set_mm_exe_file'; did you mean 'set_mm_exe_file'? [-Werror=implicit-function-declaration]
> return prctl_set_mm_exe_file(mm, (unsigned int)addr);
> ^~~~~~~~~~~~~~~~~~~~~
"prctl: don't compile some of prctl functions when CRUI disabled" was a
fix against "prctl: remove non PR_SET_MM_MAP operations", and it
appears that the base patch wasn't applied when this test was
performed.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH] prctl: Don't compile some of prctl functions when CRUI
2018-04-20 21:00 ` Andrew Morton
@ 2019-04-17 12:23 ` Michal Koutný
2019-04-17 12:38 ` Cyrill Gorcunov
0 siblings, 1 reply; 18+ messages in thread
From: Michal Koutný @ 2019-04-17 12:23 UTC (permalink / raw)
To: Andrew Morton, Cyrill Gorcunov
Cc: Sergey Senozhatsky, kbuild-all, LKML, Michal Hocko, Randy Dunlap,
Andrey Vagin, Andrew Morton, Pavel Emelyanov, Michael Kerrisk,
Yang Shi, kbuild test robot
Hi.
I see this discussion somewhat faded away since the previous year.
There was rework [1] that reduced (ab)use of mmap_sem in prctl
functions.
Actually, there still remains the down_write() in prctl_set_mm.
I considered at least replacing it with the mm_struct.arg_lock +
down_read() but then I learnt about this thread intending to remove that
part completely. I wouldn't oppose if CRIU is the sole (aware) user.
Ad the bot build issue, I could build the kernel both with
CONFIG_CHECKPOINT_RESTORE and without CONFIG_CHECKPOINT_RESTORE just
fine after applying the two proposed patches.
What is the current state? Perhaps, this change should be CCed to
linux-api@vger.kernel.org(?).
Thanks,
Michal
[1] https://lore.kernel.org/lkml/1523730291-109696-1-git-send-email-yang.shi@linux.alibaba.com/T/
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH] prctl: Don't compile some of prctl functions when CRUI
2019-04-17 12:23 ` Michal Koutný
@ 2019-04-17 12:38 ` Cyrill Gorcunov
2019-04-17 14:44 ` Michal Koutný
0 siblings, 1 reply; 18+ messages in thread
From: Cyrill Gorcunov @ 2019-04-17 12:38 UTC (permalink / raw)
To: Michal Koutný
Cc: Andrew Morton, Sergey Senozhatsky, kbuild-all, LKML,
Michal Hocko, Randy Dunlap, Andrey Vagin, Andrew Morton,
Pavel Emelyanov, Michael Kerrisk, Yang Shi, kbuild test robot
On Wed, Apr 17, 2019 at 02:23:50PM +0200, Michal Koutný wrote:
> Hi.
>
> I see this discussion somewhat faded away since the previous year.
>
> There was rework [1] that reduced (ab)use of mmap_sem in prctl
> functions.
>
> Actually, there still remains the down_write() in prctl_set_mm.
> I considered at least replacing it with the mm_struct.arg_lock +
> down_read() but then I learnt about this thread intending to remove that
> part completely. I wouldn't oppose if CRIU is the sole (aware) user.
>
> Ad the bot build issue, I could build the kernel both with
> CONFIG_CHECKPOINT_RESTORE and without CONFIG_CHECKPOINT_RESTORE just
> fine after applying the two proposed patches.
>
> What is the current state? Perhaps, this change should be CCed to
> linux-api@vger.kernel.org(?).
>
> [1] https://lore.kernel.org/lkml/1523730291-109696-1-git-send-email-yang.shi@linux.alibaba.com/T/
Hi! I've a bit vague memory what we've ended up with, but iirc there was
a problem with brk() syscall or similar. Then I think we left everything
as is. I think there is no much activity in this prctl area now as far
as i know (replying to what is current state).
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH] prctl: Don't compile some of prctl functions when CRUI
2019-04-17 12:38 ` Cyrill Gorcunov
@ 2019-04-17 14:44 ` Michal Koutný
2019-04-17 14:56 ` Cyrill Gorcunov
2019-04-17 16:56 ` Cyrill Gorcunov
0 siblings, 2 replies; 18+ messages in thread
From: Michal Koutný @ 2019-04-17 14:44 UTC (permalink / raw)
To: Cyrill Gorcunov
Cc: kbuild-all, Michael Kerrisk, Sergey Senozhatsky, Randy Dunlap,
kbuild test robot, Michal Hocko, Andrew Morton, Yang Shi,
Andrew Morton, Andrey Vagin, LKML, Pavel Emelyanov
[-- Attachment #1: Type: text/plain, Size: 365 bytes --]
On Wed, Apr 17, 2019 at 03:38:41PM +0300, Cyrill Gorcunov <gorcunov@gmail.com> wrote:
> I've a bit vague memory what we've ended up with, but iirc there was
> a problem with brk() syscall or similar. Then I think we left everything
> as is.
Was this related to the removal of non PR_SET_MM_MAP operations too?
Do you have any pointers to the topic?
Thanks,
Michal
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH] prctl: Don't compile some of prctl functions when CRUI
2019-04-17 14:44 ` Michal Koutný
@ 2019-04-17 14:56 ` Cyrill Gorcunov
2019-04-17 16:56 ` Cyrill Gorcunov
1 sibling, 0 replies; 18+ messages in thread
From: Cyrill Gorcunov @ 2019-04-17 14:56 UTC (permalink / raw)
To: Michal Koutný
Cc: kbuild-all, Michael Kerrisk, Sergey Senozhatsky, Randy Dunlap,
kbuild test robot, Michal Hocko, Andrew Morton, Yang Shi,
Andrew Morton, Andrey Vagin, LKML, Pavel Emelyanov
On Wed, Apr 17, 2019 at 04:44:54PM +0200, Michal Koutný wrote:
> On Wed, Apr 17, 2019 at 03:38:41PM +0300, Cyrill Gorcunov <gorcunov@gmail.com> wrote:
> > I've a bit vague memory what we've ended up with, but iirc there was
> > a problem with brk() syscall or similar. Then I think we left everything
> > as is.
>
> Was this related to the removal of non PR_SET_MM_MAP operations too?
> Do you have any pointers to the topic?
Gimme some time, will reply later.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH] prctl: Don't compile some of prctl functions when CRUI
2019-04-17 14:44 ` Michal Koutný
2019-04-17 14:56 ` Cyrill Gorcunov
@ 2019-04-17 16:56 ` Cyrill Gorcunov
1 sibling, 0 replies; 18+ messages in thread
From: Cyrill Gorcunov @ 2019-04-17 16:56 UTC (permalink / raw)
To: Michal Koutný
Cc: kbuild-all, Michael Kerrisk, Sergey Senozhatsky, Randy Dunlap,
kbuild test robot, Michal Hocko, Andrew Morton, Yang Shi,
Andrew Morton, Andrey Vagin, LKML, Pavel Emelyanov
On Wed, Apr 17, 2019 at 04:44:54PM +0200, Michal Koutný wrote:
> On Wed, Apr 17, 2019 at 03:38:41PM +0300, Cyrill Gorcunov <gorcunov@gmail.com> wrote:
> > I've a bit vague memory what we've ended up with, but iirc there was
> > a problem with brk() syscall or similar. Then I think we left everything
> > as is.
> Was this related to the removal of non PR_SET_MM_MAP operations too?
> Do you have any pointers to the topic?
Here some details: suprisingly there are already users of PR_SET_MM_x
operands, so we can't deprecate it (https://lkml.org/lkml/2018/5/6/127).
And then there was an attempt to change locks https://lore.kernel.org/patchwork/patch/
but since we're modifying mm-> entries we should gurd them against
simultaneous sys_brk call. Or I misunderstood you and you meant somthing
different?
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH] prctl: Don't compile some of prctl functions when CRUI
2018-04-20 7:29 ` Sergey Senozhatsky
2018-04-20 8:18 ` Cyrill Gorcunov
2018-04-20 20:37 ` [PATCH] prctl: Don't compile some of prctl functions when CRUI kbuild test robot
@ 2018-04-20 21:43 ` kbuild test robot
2 siblings, 0 replies; 18+ messages in thread
From: kbuild test robot @ 2018-04-20 21:43 UTC (permalink / raw)
To: Sergey Senozhatsky
Cc: kbuild-all, Cyrill Gorcunov, Sergey Senozhatsky, LKML,
Michal Hocko, Randy Dunlap, Andrey Vagin, Andrew Morton,
Pavel Emelyanov, Michael Kerrisk, Yang Shi
[-- Attachment #1: Type: text/plain, Size: 9079 bytes --]
Hi Sergey,
I love your patch! Yet something to improve:
[auto build test ERROR on linus/master]
[also build test ERROR on v4.17-rc1 next-20180420]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Sergey-Senozhatsky/prctl-Don-t-compile-some-of-prctl-functions-when-CRUI/20180421-040826
config: i386-randconfig-s1-201815 (attached as .config)
compiler: gcc-6 (Debian 6.4.0-9) 6.4.0 20171026
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All errors (new ones prefixed by >>):
kernel/sys.c: In function 'prctl_set_mm':
>> kernel/sys.c:2108:10: error: implicit declaration of function 'prctl_set_mm_exe_file' [-Werror=implicit-function-declaration]
return prctl_set_mm_exe_file(mm, (unsigned int)addr);
^~~~~~~~~~~~~~~~~~~~~
>> kernel/sys.c:2174:10: error: implicit declaration of function 'validate_prctl_map' [-Werror=implicit-function-declaration]
error = validate_prctl_map(&prctl_map);
^~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
vim +/prctl_set_mm_exe_file +2108 kernel/sys.c
f606b77f1 Cyrill Gorcunov 2014-10-09 2103
79f0713d4 Cyrill Gorcunov 2012-03-15 2104 if (!capable(CAP_SYS_RESOURCE))
028ee4be3 Cyrill Gorcunov 2012-01-12 2105 return -EPERM;
028ee4be3 Cyrill Gorcunov 2012-01-12 2106
6e399cd14 Davidlohr Bueso 2015-04-16 2107 if (opt == PR_SET_MM_EXE_FILE)
6e399cd14 Davidlohr Bueso 2015-04-16 @2108 return prctl_set_mm_exe_file(mm, (unsigned int)addr);
b32dfe377 Cyrill Gorcunov 2012-05-31 2109
4a00e9df2 Alexey Dobriyan 2015-06-25 2110 if (opt == PR_SET_MM_AUXV)
4a00e9df2 Alexey Dobriyan 2015-06-25 2111 return prctl_set_auxv(mm, addr, arg4);
4a00e9df2 Alexey Dobriyan 2015-06-25 2112
1ad75b9e1 Cyrill Gorcunov 2012-06-07 2113 if (addr >= TASK_SIZE || addr < mmap_min_addr)
028ee4be3 Cyrill Gorcunov 2012-01-12 2114 return -EINVAL;
028ee4be3 Cyrill Gorcunov 2012-01-12 2115
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2116 error = -EINVAL;
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2117
ddf1d398e Mateusz Guzik 2016-01-20 2118 down_write(&mm->mmap_sem);
028ee4be3 Cyrill Gorcunov 2012-01-12 2119 vma = find_vma(mm, addr);
028ee4be3 Cyrill Gorcunov 2012-01-12 2120
4a00e9df2 Alexey Dobriyan 2015-06-25 2121 prctl_map.start_code = mm->start_code;
4a00e9df2 Alexey Dobriyan 2015-06-25 2122 prctl_map.end_code = mm->end_code;
4a00e9df2 Alexey Dobriyan 2015-06-25 2123 prctl_map.start_data = mm->start_data;
4a00e9df2 Alexey Dobriyan 2015-06-25 2124 prctl_map.end_data = mm->end_data;
4a00e9df2 Alexey Dobriyan 2015-06-25 2125 prctl_map.start_brk = mm->start_brk;
4a00e9df2 Alexey Dobriyan 2015-06-25 2126 prctl_map.brk = mm->brk;
4a00e9df2 Alexey Dobriyan 2015-06-25 2127 prctl_map.start_stack = mm->start_stack;
4a00e9df2 Alexey Dobriyan 2015-06-25 2128 prctl_map.arg_start = mm->arg_start;
4a00e9df2 Alexey Dobriyan 2015-06-25 2129 prctl_map.arg_end = mm->arg_end;
4a00e9df2 Alexey Dobriyan 2015-06-25 2130 prctl_map.env_start = mm->env_start;
4a00e9df2 Alexey Dobriyan 2015-06-25 2131 prctl_map.env_end = mm->env_end;
4a00e9df2 Alexey Dobriyan 2015-06-25 2132 prctl_map.auxv = NULL;
4a00e9df2 Alexey Dobriyan 2015-06-25 2133 prctl_map.auxv_size = 0;
4a00e9df2 Alexey Dobriyan 2015-06-25 2134 prctl_map.exe_fd = -1;
4a00e9df2 Alexey Dobriyan 2015-06-25 2135
028ee4be3 Cyrill Gorcunov 2012-01-12 2136 switch (opt) {
028ee4be3 Cyrill Gorcunov 2012-01-12 2137 case PR_SET_MM_START_CODE:
4a00e9df2 Alexey Dobriyan 2015-06-25 2138 prctl_map.start_code = addr;
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2139 break;
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2140 case PR_SET_MM_END_CODE:
4a00e9df2 Alexey Dobriyan 2015-06-25 2141 prctl_map.end_code = addr;
028ee4be3 Cyrill Gorcunov 2012-01-12 2142 break;
028ee4be3 Cyrill Gorcunov 2012-01-12 2143 case PR_SET_MM_START_DATA:
4a00e9df2 Alexey Dobriyan 2015-06-25 2144 prctl_map.start_data = addr;
028ee4be3 Cyrill Gorcunov 2012-01-12 2145 break;
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2146 case PR_SET_MM_END_DATA:
4a00e9df2 Alexey Dobriyan 2015-06-25 2147 prctl_map.end_data = addr;
4a00e9df2 Alexey Dobriyan 2015-06-25 2148 break;
4a00e9df2 Alexey Dobriyan 2015-06-25 2149 case PR_SET_MM_START_STACK:
4a00e9df2 Alexey Dobriyan 2015-06-25 2150 prctl_map.start_stack = addr;
028ee4be3 Cyrill Gorcunov 2012-01-12 2151 break;
028ee4be3 Cyrill Gorcunov 2012-01-12 2152 case PR_SET_MM_START_BRK:
4a00e9df2 Alexey Dobriyan 2015-06-25 2153 prctl_map.start_brk = addr;
028ee4be3 Cyrill Gorcunov 2012-01-12 2154 break;
028ee4be3 Cyrill Gorcunov 2012-01-12 2155 case PR_SET_MM_BRK:
4a00e9df2 Alexey Dobriyan 2015-06-25 2156 prctl_map.brk = addr;
4a00e9df2 Alexey Dobriyan 2015-06-25 2157 break;
4a00e9df2 Alexey Dobriyan 2015-06-25 2158 case PR_SET_MM_ARG_START:
4a00e9df2 Alexey Dobriyan 2015-06-25 2159 prctl_map.arg_start = addr;
4a00e9df2 Alexey Dobriyan 2015-06-25 2160 break;
4a00e9df2 Alexey Dobriyan 2015-06-25 2161 case PR_SET_MM_ARG_END:
4a00e9df2 Alexey Dobriyan 2015-06-25 2162 prctl_map.arg_end = addr;
4a00e9df2 Alexey Dobriyan 2015-06-25 2163 break;
4a00e9df2 Alexey Dobriyan 2015-06-25 2164 case PR_SET_MM_ENV_START:
4a00e9df2 Alexey Dobriyan 2015-06-25 2165 prctl_map.env_start = addr;
4a00e9df2 Alexey Dobriyan 2015-06-25 2166 break;
4a00e9df2 Alexey Dobriyan 2015-06-25 2167 case PR_SET_MM_ENV_END:
4a00e9df2 Alexey Dobriyan 2015-06-25 2168 prctl_map.env_end = addr;
4a00e9df2 Alexey Dobriyan 2015-06-25 2169 break;
4a00e9df2 Alexey Dobriyan 2015-06-25 2170 default:
028ee4be3 Cyrill Gorcunov 2012-01-12 2171 goto out;
4a00e9df2 Alexey Dobriyan 2015-06-25 2172 }
028ee4be3 Cyrill Gorcunov 2012-01-12 2173
4a00e9df2 Alexey Dobriyan 2015-06-25 @2174 error = validate_prctl_map(&prctl_map);
4a00e9df2 Alexey Dobriyan 2015-06-25 2175 if (error)
028ee4be3 Cyrill Gorcunov 2012-01-12 2176 goto out;
028ee4be3 Cyrill Gorcunov 2012-01-12 2177
4a00e9df2 Alexey Dobriyan 2015-06-25 2178 switch (opt) {
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2179 /*
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2180 * If command line arguments and environment
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2181 * are placed somewhere else on stack, we can
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2182 * set them up here, ARG_START/END to setup
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2183 * command line argumets and ENV_START/END
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2184 * for environment.
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2185 */
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2186 case PR_SET_MM_START_STACK:
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2187 case PR_SET_MM_ARG_START:
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2188 case PR_SET_MM_ARG_END:
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2189 case PR_SET_MM_ENV_START:
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2190 case PR_SET_MM_ENV_END:
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2191 if (!vma) {
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2192 error = -EFAULT;
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2193 goto out;
fe8c7f5cb Cyrill Gorcunov 2012-05-31 2194 }
028ee4be3 Cyrill Gorcunov 2012-01-12 2195 }
028ee4be3 Cyrill Gorcunov 2012-01-12 2196
4a00e9df2 Alexey Dobriyan 2015-06-25 2197 mm->start_code = prctl_map.start_code;
4a00e9df2 Alexey Dobriyan 2015-06-25 2198 mm->end_code = prctl_map.end_code;
4a00e9df2 Alexey Dobriyan 2015-06-25 2199 mm->start_data = prctl_map.start_data;
4a00e9df2 Alexey Dobriyan 2015-06-25 2200 mm->end_data = prctl_map.end_data;
4a00e9df2 Alexey Dobriyan 2015-06-25 2201 mm->start_brk = prctl_map.start_brk;
4a00e9df2 Alexey Dobriyan 2015-06-25 2202 mm->brk = prctl_map.brk;
4a00e9df2 Alexey Dobriyan 2015-06-25 2203 mm->start_stack = prctl_map.start_stack;
4a00e9df2 Alexey Dobriyan 2015-06-25 2204 mm->arg_start = prctl_map.arg_start;
4a00e9df2 Alexey Dobriyan 2015-06-25 2205 mm->arg_end = prctl_map.arg_end;
4a00e9df2 Alexey Dobriyan 2015-06-25 2206 mm->env_start = prctl_map.env_start;
4a00e9df2 Alexey Dobriyan 2015-06-25 2207 mm->env_end = prctl_map.env_end;
4a00e9df2 Alexey Dobriyan 2015-06-25 2208
028ee4be3 Cyrill Gorcunov 2012-01-12 2209 error = 0;
028ee4be3 Cyrill Gorcunov 2012-01-12 2210 out:
ddf1d398e Mateusz Guzik 2016-01-20 2211 up_write(&mm->mmap_sem);
028ee4be3 Cyrill Gorcunov 2012-01-12 2212 return error;
028ee4be3 Cyrill Gorcunov 2012-01-12 2213 }
300f786b2 Cyrill Gorcunov 2012-06-07 2214
:::::: The code at line 2108 was first introduced by commit
:::::: 6e399cd144d8500ffb5d40fa6848890e2580a80a prctl: avoid using mmap_sem for exe_file serialization
:::::: TO: Davidlohr Bueso <dave@stgolabs.net>
:::::: CC: Linus Torvalds <torvalds@linux-foundation.org>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 28656 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread