[PATCH v4 0/5] slimbus: Add QCOM SLIMBus NGD driver

[PATCH v4 0/5] slimbus: Add QCOM SLIMBus NGD driver

[Srinivas Kandagatla]

This patchset adds support to basic version of Qualcomm NGD SLIMBus
controller driver found SoCs from B family.

This controller is light-weight SLIMBus controller driver responsible for
communicating with slave HW directly over the bus using messaging
interface, and communicating with master component residing on ADSP
for bandwidth and data-channel management.

Some parts fot the work is derived from Qualcomm downstream kernels
and intial work from
Karthikeyan Ramasubramanian <kramasub@codeaurora.org> and
Sagar Dharia <sdharia@codeaurora.org>

Tested this patchset with v4.18-rc1 on DB820c with WCD9335 codec for playback
and Craig tested on msm8974 with wcd9320 codec for register read/writes.

I have pushed my working branch to [1] incase someone want to try.

[1]:https://git.linaro.org/people/srinivas.kandagatla/linux.git/log/?h=slimbus-ngd

Changes since v4:
- Moved all dependency patches to this patchset.
- replaced slim_prepare_txn with slim_alloc/free_txn_tid()
- fixed runtime pm issue for ngd device.

Srinivas Kandagatla (5):
  slimbus: core: add of_slim_device_get() helper
  slimbus: core: rearrange slim_eaddr structure
  slimbus: messaging: add slim_alloc/free_txn_tid()
  slimbus: ngd: dt-bindings: Add slim ngd dt bindings
  slimbus: ngd: Add qcom SLIMBus NGD driver

 .../bindings/slimbus/slim-ngd-qcom-ctrl.txt        |   84 ++
 drivers/slimbus/Kconfig                            |   11 +
 drivers/slimbus/Makefile                           |    3 +
 drivers/slimbus/core.c                             |   39 +
 drivers/slimbus/messaging.c                        |   74 +-
 drivers/slimbus/qcom-ngd-ctrl.c                    | 1381 ++++++++++++++++++++
 drivers/slimbus/slimbus.h                          |   10 +
 include/linux/slimbus.h                            |   14 +-
 8 files changed, 1588 insertions(+), 28 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt
 create mode 100644 drivers/slimbus/qcom-ngd-ctrl.c

-- 
2.16.2

[PATCH v4 1/5] slimbus: core: add of_slim_device_get() helper

[Srinivas Kandagatla]

On SLIMBus controllers like Qcom NGD(non ported device), controller
can request logical address once the remote side is powered, having a
helper function like this to explicitly enumerate the bus is helpful.
Also codec drivers which are taking to interface device would need
such a helper too.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/slimbus/core.c  | 39 +++++++++++++++++++++++++++++++++++++++
 include/linux/slimbus.h |  2 ++
 2 files changed, 41 insertions(+)

diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c
index 7ddfc675b131..88248a4ecad9 100644
--- a/drivers/slimbus/core.c
+++ b/drivers/slimbus/core.c
@@ -356,6 +356,45 @@ struct slim_device *slim_get_device(struct slim_controller *ctrl,
 }
 EXPORT_SYMBOL_GPL(slim_get_device);
 
+static int of_slim_match_dev(struct device *dev, void *data)
+{
+	struct device_node *np = data;
+	struct slim_device *sbdev = to_slim_device(dev);
+
+	return (sbdev->dev.of_node == np);
+}
+
+static struct slim_device *of_find_slim_device(struct slim_controller *ctrl,
+					       struct device_node *np)
+{
+	struct slim_device *sbdev;
+	struct device *dev;
+
+	dev = device_find_child(ctrl->dev, np, of_slim_match_dev);
+	if (dev) {
+		sbdev = to_slim_device(dev);
+		return sbdev;
+	}
+
+	return NULL;
+}
+
+/**
+ * of_slim_get_device() - get handle to a device using dt node.
+ *
+ * @ctrl: Controller on which this device will be added/queried
+ * @np: node pointer to device
+ *
+ * Return: pointer to a device if it has already reported. Creates a new
+ * device and returns pointer to it if the device has not yet enumerated.
+ */
+struct slim_device *of_slim_get_device(struct slim_controller *ctrl,
+				       struct device_node *np)
+{
+	return of_find_slim_device(ctrl, np);
+}
+EXPORT_SYMBOL_GPL(of_slim_get_device);
+
 static int slim_device_alloc_laddr(struct slim_device *sbdev,
 				   bool report_present)
 {
diff --git a/include/linux/slimbus.h b/include/linux/slimbus.h
index c36cf121d2cd..efa36a852dc3 100644
--- a/include/linux/slimbus.h
+++ b/include/linux/slimbus.h
@@ -138,6 +138,8 @@ static inline void slim_set_devicedata(struct slim_device *dev, void *data)
 	dev_set_drvdata(&dev->dev, data);
 }
 
+struct slim_device *of_slim_get_device(struct slim_controller *ctrl,
+				       struct device_node *np);
 struct slim_device *slim_get_device(struct slim_controller *ctrl,
 				    struct slim_eaddr *e_addr);
 int slim_get_logical_addr(struct slim_device *sbdev);
-- 
2.16.2

[PATCH v4 2/5] slimbus: core: rearrange slim_eaddr structure

[Srinivas Kandagatla]

Rearrange struct slim_eaddr so that the structure is packed correctly
to be able to send in SLIMBus messages.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 include/linux/slimbus.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/linux/slimbus.h b/include/linux/slimbus.h
index efa36a852dc3..63801bcc5e60 100644
--- a/include/linux/slimbus.h
+++ b/include/linux/slimbus.h
@@ -14,16 +14,16 @@ extern struct bus_type slimbus_bus;
 
 /**
  * struct slim_eaddr - Enumeration address for a SLIMbus device
- * @manf_id: Manufacturer Id for the device
- * @prod_code: Product code
- * @dev_index: Device index
  * @instance: Instance value
+ * @dev_index: Device index
+ * @prod_code: Product code
+ * @manf_id: Manufacturer Id for the device
  */
 struct slim_eaddr {
-	u16 manf_id;
-	u16 prod_code;
-	u8 dev_index;
 	u8 instance;
+	u8 dev_index;
+	u16 prod_code;
+	u16 manf_id;
 } __packed;
 
 /**
-- 
2.16.2

[PATCH v4 3/5] slimbus: messaging: add slim_alloc/free_txn_tid()

[Srinivas Kandagatla]

This patch adds slim_alloc_txn_tid() and slim_free_txn_tid() api
to allow controllers like ngd to allocate tids for user specific
commands. This also cleans up the existing code to use single place
for tid allocations and free.

This patch also make the tid allocation cyclic one, its very useful
to track the transactions back during debug.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/slimbus/messaging.c | 74 +++++++++++++++++++++++++++++++--------------
 drivers/slimbus/slimbus.h   |  2 ++
 2 files changed, 54 insertions(+), 22 deletions(-)

diff --git a/drivers/slimbus/messaging.c b/drivers/slimbus/messaging.c
index e3605ed1c459..d5879142dbef 100644
--- a/drivers/slimbus/messaging.c
+++ b/drivers/slimbus/messaging.c
@@ -29,22 +29,19 @@ void slim_msg_response(struct slim_controller *ctrl, u8 *reply, u8 tid, u8 len)
 
 	spin_lock_irqsave(&ctrl->txn_lock, flags);
 	txn = idr_find(&ctrl->tid_idr, tid);
-	if (txn == NULL) {
-		spin_unlock_irqrestore(&ctrl->txn_lock, flags);
+	spin_unlock_irqrestore(&ctrl->txn_lock, flags);
+
+	if (txn == NULL)
 		return;
-	}
 
 	msg = txn->msg;
 	if (msg == NULL || msg->rbuf == NULL) {
 		dev_err(ctrl->dev, "Got response to invalid TID:%d, len:%d\n",
 				tid, len);
-		spin_unlock_irqrestore(&ctrl->txn_lock, flags);
 		return;
 	}
 
-	idr_remove(&ctrl->tid_idr, tid);
-	spin_unlock_irqrestore(&ctrl->txn_lock, flags);
-
+	slim_free_txn_tid(ctrl, txn);
 	memcpy(msg->rbuf, reply, len);
 	if (txn->comp)
 		complete(txn->comp);
@@ -55,6 +52,48 @@ void slim_msg_response(struct slim_controller *ctrl, u8 *reply, u8 tid, u8 len)
 }
 EXPORT_SYMBOL_GPL(slim_msg_response);
 
+/**
+ * slim_alloc_txn_tid() - Allocate a tid to txn
+ *
+ * @ctrl: Controller handle
+ * @txn: transaction to be allocated with tid.
+ *
+ * Return: zero on success with valid txn->tid and error code on failures.
+ */
+int slim_alloc_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&ctrl->txn_lock, flags);
+	ret = idr_alloc_cyclic(&ctrl->tid_idr, txn, 0,
+				SLIM_MAX_TIDS, GFP_ATOMIC);
+	if (ret < 0) {
+		spin_unlock_irqrestore(&ctrl->txn_lock, flags);
+		return ret;
+	}
+	txn->tid = ret;
+	spin_unlock_irqrestore(&ctrl->txn_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_alloc_txn_tid);
+
+/**
+ * slim_free_txn_tid() - Freee tid of txn
+ *
+ * @ctrl: Controller handle
+ * @txn: transaction whose tid should be freed
+ */
+void slim_free_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctrl->txn_lock, flags);
+	idr_remove(&ctrl->tid_idr, txn->tid);
+	spin_unlock_irqrestore(&ctrl->txn_lock, flags);
+}
+EXPORT_SYMBOL_GPL(slim_free_txn_tid);
+
 /**
  * slim_do_transfer() - Process a SLIMbus-messaging transaction
  *
@@ -72,8 +111,7 @@ int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn)
 {
 	DECLARE_COMPLETION_ONSTACK(done);
 	bool need_tid = false, clk_pause_msg = false;
-	unsigned long flags;
-	int ret, tid, timeout;
+	int ret, timeout;
 
 	/*
 	 * do not vote for runtime-PM if the transactions are part of clock
@@ -97,34 +135,26 @@ int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn)
 	need_tid = slim_tid_txn(txn->mt, txn->mc);
 
 	if (need_tid) {
-		spin_lock_irqsave(&ctrl->txn_lock, flags);
-		tid = idr_alloc(&ctrl->tid_idr, txn, 0,
-				SLIM_MAX_TIDS, GFP_ATOMIC);
-		txn->tid = tid;
+		ret = slim_alloc_txn_tid(ctrl, txn);
+		if (ret)
+			return ret;
 
 		if (!txn->msg->comp)
 			txn->comp = &done;
 		else
 			txn->comp = txn->comp;
-
-		spin_unlock_irqrestore(&ctrl->txn_lock, flags);
-
-		if (tid < 0)
-			return tid;
 	}
 
 	ret = ctrl->xfer_msg(ctrl, txn);
 
-	if (ret && need_tid && !txn->msg->comp) {
+	if (!ret && need_tid && !txn->msg->comp) {
 		unsigned long ms = txn->rl + HZ;
 
 		timeout = wait_for_completion_timeout(txn->comp,
 						      msecs_to_jiffies(ms));
 		if (!timeout) {
 			ret = -ETIMEDOUT;
-			spin_lock_irqsave(&ctrl->txn_lock, flags);
-			idr_remove(&ctrl->tid_idr, tid);
-			spin_unlock_irqrestore(&ctrl->txn_lock, flags);
+			slim_free_txn_tid(ctrl, txn);
 		}
 	}
 
diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h
index 79f8e05d92dd..2ba6545fa716 100644
--- a/drivers/slimbus/slimbus.h
+++ b/drivers/slimbus/slimbus.h
@@ -240,6 +240,8 @@ int slim_unregister_controller(struct slim_controller *ctrl);
 void slim_msg_response(struct slim_controller *ctrl, u8 *reply, u8 tid, u8 l);
 int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn);
 int slim_ctrl_clk_pause(struct slim_controller *ctrl, bool wakeup, u8 restart);
+int slim_alloc_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn);
+void slim_free_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn);
 
 static inline bool slim_tid_txn(u8 mt, u8 mc)
 {
-- 
2.16.2

[PATCH v4 4/5] slimbus: ngd: dt-bindings: Add slim ngd dt bindings

[Srinivas Kandagatla]

This patch adds bindings for Qualcomm SLIMBus NGD controller.
SLIMBus NGD controller is a light-weight driver responsible for
communicating with SLIMBus slaves directly over the bus using messaging
interface and communicating with master component residing on ADSP for
bandwidth and data-channel management

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Craig Tatlor <ctatlor97@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
 .../bindings/slimbus/slim-ngd-qcom-ctrl.txt        | 84 ++++++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt

diff --git a/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt
new file mode 100644
index 000000000000..e94a2ad3a710
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt
@@ -0,0 +1,84 @@
+Qualcomm SLIMBus Non Generic Device (NGD) Controller binding
+
+SLIMBus NGD controller is a light-weight driver responsible for communicating
+with SLIMBus slaves directly over the bus using messaging interface and
+communicating with master component residing on ADSP for bandwidth and
+data-channel management
+
+Please refer to slimbus/bus.txt for details of the common SLIMBus bindings.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,slim-ngd-v<MAJOR>.<MINOR>.<STEP>"
+	must be one of the following.
+	"qcom,slim-ngd-v1.5.0" for MSM8996
+	"qcom,slim-ngd-v2.1.0" for SDM845
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must specify the base address and size of the controller
+		    register space.
+- dmas
+	Usage: required
+	Value type: <array of phandles>
+	Definition: List of rx and tx dma channels
+
+- dma-names
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "rx" and "tx".
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must list controller IRQ.
+
+#address-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Should be 1, reflecting the instance id of ngd.
+
+#size-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Should be 0
+
+= NGD Devices
+Each subnode represents an instance of NGD, must contain the following
+properties:
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: Should be instance id of ngd.
+
+#address-cells
+	Usage: required
+	Refer to slimbus/bus.txt for details of the common SLIMBus bindings.
+
+#size-cells
+	Usage: required
+	Refer to slimbus/bus.txt for details of the common SLIMBus bindings.
+
+= EXAMPLE
+
+slim@91c0000 {
+	compatible = "qcom,slim-ngd-v1.5.0";
+	reg = <0x91c0000 0x2c000>;
+	interrupts = <0 163 0>;
+	dmas =	<&slimbam 3>, <&slimbam 4>;
+	dma-names = "rx", "tx";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	ngd@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		codec@1 {
+			compatible = "slim217,1a0";
+			reg  = <1 0>;
+		};
+	};
+};
-- 
2.16.2

[PATCH v4 5/5] slimbus: ngd: Add qcom SLIMBus NGD driver

[Srinivas Kandagatla]

This patch adds suppor to Qualcomm SLIMBus Non-Generic Device (NGD)
controller driver.
This is light-weight SLIMBus controller driver responsible for
communicating with slave HW directly over the bus using messaging
interface, and communicating with master component residing on ADSP
for bandwidth and data-channel management

Based on intial work from
Karthikeyan Ramasubramanian <kramasub@codeaurora.org> and
Sagar Dharia <sdharia@codeaurora.org>

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Craig Tatlor <ctatlor97@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/slimbus/Kconfig         |   11 +
 drivers/slimbus/Makefile        |    3 +
 drivers/slimbus/qcom-ngd-ctrl.c | 1381 +++++++++++++++++++++++++++++++++++++++
 drivers/slimbus/slimbus.h       |    8 +
 4 files changed, 1403 insertions(+)
 create mode 100644 drivers/slimbus/qcom-ngd-ctrl.c

diff --git a/drivers/slimbus/Kconfig b/drivers/slimbus/Kconfig
index bfb78d9a6583..9d73ad806698 100644
--- a/drivers/slimbus/Kconfig
+++ b/drivers/slimbus/Kconfig
@@ -20,4 +20,15 @@ config SLIM_QCOM_CTRL
 	  Select driver if Qualcomm's SLIMbus Manager Component is
 	  programmed using Linux kernel.
 
+config SLIM_QCOM_NGD_CTRL
+	tristate "Qualcomm SLIMbus Satellite Non-Generic Device Component"
+	depends on QCOM_QMI_HELPERS
+	depends on HAS_IOMEM && DMA_ENGINE
+	help
+	  Select driver if Qualcomm's SLIMbus Satellite Non-Generic Device
+	  Component is programmed using Linux kernel.
+	  This is light-weight slimbus controller driver responsible for
+	  communicating with slave HW directly over the bus using messaging
+	  interface, and communicating with master component residing on ADSP
+	  for bandwidth and data-channel management.
 endif
diff --git a/drivers/slimbus/Makefile b/drivers/slimbus/Makefile
index a35a3da4eb78..c78c6e16c2df 100644
--- a/drivers/slimbus/Makefile
+++ b/drivers/slimbus/Makefile
@@ -8,3 +8,6 @@ slimbus-y				:= core.o messaging.o sched.o
 #Controllers
 obj-$(CONFIG_SLIM_QCOM_CTRL)		+= slim-qcom-ctrl.o
 slim-qcom-ctrl-y			:= qcom-ctrl.o
+
+obj-$(CONFIG_SLIM_QCOM_NGD_CTRL)	+= slim-qcom-ngd-ctrl.o
+slim-qcom-ngd-ctrl-y			:= qcom-ngd-ctrl.o
diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
new file mode 100644
index 000000000000..8554e3f43522
--- /dev/null
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -0,0 +1,1381 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2011-2017, The Linux Foundation. All rights reserved.
+// Copyright (c) 2018, Linaro Limited
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/slimbus.h>
+#include <linux/delay.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/soc/qcom/qmi.h>
+#include <net/sock.h>
+#include "slimbus.h"
+
+/* NGD (Non-ported Generic Device) registers */
+#define	NGD_CFG			0x0
+#define	NGD_CFG_ENABLE		BIT(0)
+#define	NGD_CFG_RX_MSGQ_EN	BIT(1)
+#define	NGD_CFG_TX_MSGQ_EN	BIT(2)
+#define	NGD_STATUS		0x4
+#define NGD_LADDR		BIT(1)
+#define	NGD_RX_MSGQ_CFG		0x8
+#define	NGD_INT_EN		0x10
+#define	NGD_INT_RECFG_DONE	BIT(24)
+#define	NGD_INT_TX_NACKED_2	BIT(25)
+#define	NGD_INT_MSG_BUF_CONTE	BIT(26)
+#define	NGD_INT_MSG_TX_INVAL	BIT(27)
+#define	NGD_INT_IE_VE_CHG	BIT(28)
+#define	NGD_INT_DEV_ERR		BIT(29)
+#define	NGD_INT_RX_MSG_RCVD	BIT(30)
+#define	NGD_INT_TX_MSG_SENT	BIT(31)
+#define	NGD_INT_STAT		0x14
+#define	NGD_INT_CLR		0x18
+#define DEF_NGD_INT_MASK (NGD_INT_TX_NACKED_2 | NGD_INT_MSG_BUF_CONTE | \
+				NGD_INT_MSG_TX_INVAL | NGD_INT_IE_VE_CHG | \
+				NGD_INT_DEV_ERR | NGD_INT_TX_MSG_SENT | \
+				NGD_INT_RX_MSG_RCVD)
+
+/* Slimbus QMI service */
+#define SLIMBUS_QMI_SVC_ID	0x0301
+#define SLIMBUS_QMI_SVC_V1	1
+#define SLIMBUS_QMI_INS_ID	0
+#define SLIMBUS_QMI_SELECT_INSTANCE_REQ_V01	0x0020
+#define SLIMBUS_QMI_SELECT_INSTANCE_RESP_V01	0x0020
+#define SLIMBUS_QMI_POWER_REQ_V01		0x0021
+#define SLIMBUS_QMI_POWER_RESP_V01		0x0021
+#define SLIMBUS_QMI_CHECK_FRAMER_STATUS_REQ	0x0022
+#define SLIMBUS_QMI_CHECK_FRAMER_STATUS_RESP	0x0022
+#define SLIMBUS_QMI_POWER_REQ_MAX_MSG_LEN	14
+#define SLIMBUS_QMI_POWER_RESP_MAX_MSG_LEN	7
+#define SLIMBUS_QMI_SELECT_INSTANCE_REQ_MAX_MSG_LEN	14
+#define SLIMBUS_QMI_SELECT_INSTANCE_RESP_MAX_MSG_LEN	7
+#define SLIMBUS_QMI_CHECK_FRAMER_STAT_RESP_MAX_MSG_LEN	7
+/* QMI response timeout of 500ms */
+#define SLIMBUS_QMI_RESP_TOUT	1000
+
+/* User defined commands */
+#define SLIM_USR_MC_GENERIC_ACK	0x25
+#define SLIM_USR_MC_MASTER_CAPABILITY	0x0
+#define SLIM_USR_MC_REPORT_SATELLITE	0x1
+#define SLIM_USR_MC_ADDR_QUERY		0xD
+#define SLIM_USR_MC_ADDR_REPLY		0xE
+#define SLIM_USR_MC_DEFINE_CHAN		0x20
+#define SLIM_USR_MC_DEF_ACT_CHAN	0x21
+#define SLIM_USR_MC_CHAN_CTRL		0x23
+#define SLIM_USR_MC_RECONFIG_NOW	0x24
+#define SLIM_USR_MC_REQ_BW		0x28
+#define SLIM_USR_MC_CONNECT_SRC		0x2C
+#define SLIM_USR_MC_CONNECT_SINK	0x2D
+#define SLIM_USR_MC_DISCONNECT_PORT	0x2E
+#define SLIM_USR_MC_REPEAT_CHANGE_VALUE	0x0
+
+#define QCOM_SLIM_NGD_AUTOSUSPEND	MSEC_PER_SEC
+#define SLIM_RX_MSGQ_TIMEOUT_VAL	0x10000
+
+#define SLIM_LA_MGR	0xFF
+#define SLIM_ROOT_FREQ	24576000
+#define LADDR_RETRY	5
+
+/* Per spec.max 40 bytes per received message */
+#define SLIM_MSGQ_BUF_LEN	40
+#define QCOM_SLIM_NGD_DESC_NUM	32
+
+#define SLIM_MSG_ASM_FIRST_WORD(l, mt, mc, dt, ad) \
+		((l) | ((mt) << 5) | ((mc) << 8) | ((dt) << 15) | ((ad) << 16))
+
+#define INIT_MX_RETRIES 10
+#define DEF_RETRY_MS	10
+#define SAT_MAGIC_LSB	0xD9
+#define SAT_MAGIC_MSB	0xC5
+#define SAT_MSG_VER	0x1
+#define SAT_MSG_PROT	0x1
+#define to_ngd(d)	container_of(d, struct qcom_slim_ngd, dev)
+
+struct ngd_reg_offset_data {
+	u32 offset, size;
+};
+
+static const struct ngd_reg_offset_data ngd_v1_5_offset_info = {
+	.offset = 0x1000,
+	.size = 0x1000,
+};
+
+enum qcom_slim_ngd_state {
+	QCOM_SLIM_NGD_CTRL_AWAKE,
+	QCOM_SLIM_NGD_CTRL_IDLE,
+	QCOM_SLIM_NGD_CTRL_ASLEEP,
+	QCOM_SLIM_NGD_CTRL_DOWN,
+};
+
+struct qcom_slim_ngd_qmi {
+	struct qmi_handle qmi;
+	struct sockaddr_qrtr svc_info;
+	struct qmi_handle svc_event_hdl;
+	struct qmi_response_type_v01 resp;
+	struct qmi_handle *handle;
+	struct completion qmi_comp;
+};
+
+struct qcom_slim_ngd_ctrl;
+struct qcom_slim_ngd;
+
+struct qcom_slim_ngd_dma_desc {
+	struct dma_async_tx_descriptor *desc;
+	struct qcom_slim_ngd_ctrl *ctrl;
+	struct completion *comp;
+	dma_cookie_t cookie;
+	dma_addr_t phys;
+	void *base;
+};
+
+struct qcom_slim_ngd {
+	struct platform_device *pdev;
+	void __iomem *base;
+	int id;
+};
+
+struct qcom_slim_ngd_ctrl {
+	struct slim_framer framer;
+	struct slim_controller ctrl;
+	struct qcom_slim_ngd_qmi qmi;
+	struct qcom_slim_ngd *ngd;
+	struct device *dev;
+	void __iomem *base;
+	struct dma_chan *dma_rx_channel;
+	struct dma_chan	*dma_tx_channel;
+	struct qcom_slim_ngd_dma_desc rx_desc[QCOM_SLIM_NGD_DESC_NUM];
+	struct qcom_slim_ngd_dma_desc txdesc[QCOM_SLIM_NGD_DESC_NUM];
+	struct completion reconf;
+	struct work_struct m_work;
+	struct workqueue_struct *mwq;
+	spinlock_t tx_buf_lock;
+	enum qcom_slim_ngd_state state;
+	dma_addr_t rx_phys_base;
+	dma_addr_t tx_phys_base;
+	void *rx_base;
+	void *tx_base;
+	int tx_tail;
+	int tx_head;
+	u32 ver;
+};
+
+enum slimbus_mode_enum_type_v01 {
+	/* To force a 32 bit signed enum. Do not change or use*/
+	SLIMBUS_MODE_ENUM_TYPE_MIN_ENUM_VAL_V01 = INT_MIN,
+	SLIMBUS_MODE_SATELLITE_V01 = 1,
+	SLIMBUS_MODE_MASTER_V01 = 2,
+	SLIMBUS_MODE_ENUM_TYPE_MAX_ENUM_VAL_V01 = INT_MAX,
+};
+
+enum slimbus_pm_enum_type_v01 {
+	/* To force a 32 bit signed enum. Do not change or use*/
+	SLIMBUS_PM_ENUM_TYPE_MIN_ENUM_VAL_V01 = INT_MIN,
+	SLIMBUS_PM_INACTIVE_V01 = 1,
+	SLIMBUS_PM_ACTIVE_V01 = 2,
+	SLIMBUS_PM_ENUM_TYPE_MAX_ENUM_VAL_V01 = INT_MAX,
+};
+
+enum slimbus_resp_enum_type_v01 {
+	SLIMBUS_RESP_ENUM_TYPE_MIN_VAL_V01 = INT_MIN,
+	SLIMBUS_RESP_SYNCHRONOUS_V01 = 1,
+	SLIMBUS_RESP_ENUM_TYPE_MAX_VAL_V01 = INT_MAX,
+};
+
+struct slimbus_select_inst_req_msg_v01 {
+	uint32_t instance;
+	uint8_t mode_valid;
+	enum slimbus_mode_enum_type_v01 mode;
+};
+
+struct slimbus_select_inst_resp_msg_v01 {
+	struct qmi_response_type_v01 resp;
+};
+
+struct slimbus_power_req_msg_v01 {
+	enum slimbus_pm_enum_type_v01 pm_req;
+	uint8_t resp_type_valid;
+	enum slimbus_resp_enum_type_v01 resp_type;
+};
+
+struct slimbus_power_resp_msg_v01 {
+	struct qmi_response_type_v01 resp;
+};
+
+static struct qmi_elem_info slimbus_select_inst_req_msg_v01_ei[] = {
+	{
+		.data_type  = QMI_UNSIGNED_4_BYTE,
+		.elem_len   = 1,
+		.elem_size  = sizeof(uint32_t),
+		.array_type = NO_ARRAY,
+		.tlv_type   = 0x01,
+		.offset     = offsetof(struct slimbus_select_inst_req_msg_v01,
+				       instance),
+		.ei_array   = NULL,
+	},
+	{
+		.data_type  = QMI_OPT_FLAG,
+		.elem_len   = 1,
+		.elem_size  = sizeof(uint8_t),
+		.array_type = NO_ARRAY,
+		.tlv_type   = 0x10,
+		.offset     = offsetof(struct slimbus_select_inst_req_msg_v01,
+				       mode_valid),
+		.ei_array   = NULL,
+	},
+	{
+		.data_type  = QMI_UNSIGNED_4_BYTE,
+		.elem_len   = 1,
+		.elem_size  = sizeof(enum slimbus_mode_enum_type_v01),
+		.array_type = NO_ARRAY,
+		.tlv_type   = 0x10,
+		.offset     = offsetof(struct slimbus_select_inst_req_msg_v01,
+				       mode),
+		.ei_array   = NULL,
+	},
+	{
+		.data_type  = QMI_EOTI,
+		.elem_len   = 0,
+		.elem_size  = 0,
+		.array_type = NO_ARRAY,
+		.tlv_type   = 0x00,
+		.offset     = 0,
+		.ei_array   = NULL,
+	},
+};
+
+static struct qmi_elem_info slimbus_select_inst_resp_msg_v01_ei[] = {
+	{
+		.data_type  = QMI_STRUCT,
+		.elem_len   = 1,
+		.elem_size  = sizeof(struct qmi_response_type_v01),
+		.array_type = NO_ARRAY,
+		.tlv_type   = 0x02,
+		.offset     = offsetof(struct slimbus_select_inst_resp_msg_v01,
+				       resp),
+		.ei_array   = qmi_response_type_v01_ei,
+	},
+	{
+		.data_type  = QMI_EOTI,
+		.elem_len   = 0,
+		.elem_size  = 0,
+		.array_type = NO_ARRAY,
+		.tlv_type   = 0x00,
+		.offset     = 0,
+		.ei_array   = NULL,
+	},
+};
+
+static struct qmi_elem_info slimbus_power_req_msg_v01_ei[] = {
+	{
+		.data_type  = QMI_UNSIGNED_4_BYTE,
+		.elem_len   = 1,
+		.elem_size  = sizeof(enum slimbus_pm_enum_type_v01),
+		.array_type = NO_ARRAY,
+		.tlv_type   = 0x01,
+		.offset     = offsetof(struct slimbus_power_req_msg_v01,
+				       pm_req),
+		.ei_array   = NULL,
+	},
+	{
+		.data_type  = QMI_OPT_FLAG,
+		.elem_len   = 1,
+		.elem_size  = sizeof(uint8_t),
+		.array_type = NO_ARRAY,
+		.tlv_type   = 0x10,
+		.offset     = offsetof(struct slimbus_power_req_msg_v01,
+				       resp_type_valid),
+	},
+	{
+		.data_type  = QMI_SIGNED_4_BYTE_ENUM,
+		.elem_len   = 1,
+		.elem_size  = sizeof(enum slimbus_resp_enum_type_v01),
+		.array_type = NO_ARRAY,
+		.tlv_type   = 0x10,
+		.offset     = offsetof(struct slimbus_power_req_msg_v01,
+				       resp_type),
+	},
+	{
+		.data_type  = QMI_EOTI,
+		.elem_len   = 0,
+		.elem_size  = 0,
+		.array_type = NO_ARRAY,
+		.tlv_type   = 0x00,
+		.offset     = 0,
+		.ei_array   = NULL,
+	},
+};
+
+static struct qmi_elem_info slimbus_power_resp_msg_v01_ei[] = {
+	{
+		.data_type  = QMI_STRUCT,
+		.elem_len   = 1,
+		.elem_size  = sizeof(struct qmi_response_type_v01),
+		.array_type = NO_ARRAY,
+		.tlv_type   = 0x02,
+		.offset     = offsetof(struct slimbus_power_resp_msg_v01, resp),
+		.ei_array   = qmi_response_type_v01_ei,
+	},
+	{
+		.data_type  = QMI_EOTI,
+		.elem_len   = 0,
+		.elem_size  = 0,
+		.array_type = NO_ARRAY,
+		.tlv_type   = 0x00,
+		.offset     = 0,
+		.ei_array   = NULL,
+	},
+};
+
+static int qcom_slim_qmi_send_select_inst_req(struct qcom_slim_ngd_ctrl *ctrl,
+				struct slimbus_select_inst_req_msg_v01 *req)
+{
+	struct slimbus_select_inst_resp_msg_v01 resp = { { 0, 0 } };
+	struct qmi_txn txn;
+	int rc;
+
+	rc = qmi_txn_init(ctrl->qmi.handle, &txn,
+				slimbus_select_inst_resp_msg_v01_ei, &resp);
+	if (rc < 0) {
+		dev_err(ctrl->dev, "QMI TXN init fail: %d\n", rc);
+		return rc;
+	}
+
+	rc = qmi_send_request(ctrl->qmi.handle, NULL, &txn,
+				SLIMBUS_QMI_SELECT_INSTANCE_REQ_V01,
+				SLIMBUS_QMI_SELECT_INSTANCE_REQ_MAX_MSG_LEN,
+				slimbus_select_inst_req_msg_v01_ei, req);
+	if (rc < 0) {
+		dev_err(ctrl->dev, "QMI send req fail %d\n", rc);
+		qmi_txn_cancel(&txn);
+		return rc;
+	}
+
+	rc = qmi_txn_wait(&txn, SLIMBUS_QMI_RESP_TOUT);
+	if (rc < 0) {
+		dev_err(ctrl->dev, "QMI TXN wait fail: %d\n", rc);
+		return rc;
+	}
+	/* Check the response */
+	if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
+		dev_err(ctrl->dev, "QMI request failed 0x%x\n",
+			resp.resp.result);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static void qcom_slim_qmi_power_resp_cb(struct qmi_handle *handle,
+					struct sockaddr_qrtr *sq,
+					struct qmi_txn *txn, const void *data)
+{
+	struct slimbus_power_resp_msg_v01 *resp;
+
+	resp = (struct slimbus_power_resp_msg_v01 *)data;
+	if (resp->resp.result != QMI_RESULT_SUCCESS_V01)
+		pr_err("QMI power request failed 0x%x\n",
+				resp->resp.result);
+
+	complete(&txn->completion);
+}
+
+static int qcom_slim_qmi_send_power_request(struct qcom_slim_ngd_ctrl *ctrl,
+					struct slimbus_power_req_msg_v01 *req)
+{
+	struct slimbus_power_resp_msg_v01 resp = { { 0, 0 } };
+	struct qmi_txn txn;
+	int rc;
+
+	rc = qmi_txn_init(ctrl->qmi.handle, &txn,
+				slimbus_power_resp_msg_v01_ei, &resp);
+
+	rc = qmi_send_request(ctrl->qmi.handle, NULL, &txn,
+				SLIMBUS_QMI_POWER_REQ_V01,
+				SLIMBUS_QMI_POWER_REQ_MAX_MSG_LEN,
+				slimbus_power_req_msg_v01_ei, req);
+	if (rc < 0) {
+		dev_err(ctrl->dev, "QMI send req fail %d\n", rc);
+		qmi_txn_cancel(&txn);
+		return rc;
+	}
+
+	rc = qmi_txn_wait(&txn, SLIMBUS_QMI_RESP_TOUT);
+	if (rc < 0) {
+		dev_err(ctrl->dev, "QMI TXN wait fail: %d\n", rc);
+		return rc;
+	}
+
+	/* Check the response */
+	if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
+		dev_err(ctrl->dev, "QMI request failed 0x%x\n",
+			resp.resp.result);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static struct qmi_msg_handler qcom_slim_qmi_msg_handlers[] = {
+	{
+		.type = QMI_RESPONSE,
+		.msg_id = SLIMBUS_QMI_POWER_RESP_V01,
+		.ei = slimbus_power_resp_msg_v01_ei,
+		.decoded_size = sizeof(struct slimbus_power_resp_msg_v01),
+		.fn = qcom_slim_qmi_power_resp_cb,
+	},
+	{}
+};
+
+static int qcom_slim_qmi_init(struct qcom_slim_ngd_ctrl *ctrl,
+			      bool apps_is_master)
+{
+	struct slimbus_select_inst_req_msg_v01 req;
+	struct qmi_handle *handle;
+	int rc;
+
+	handle = devm_kzalloc(ctrl->dev, sizeof(*handle), GFP_KERNEL);
+	if (!handle)
+		return -ENOMEM;
+
+	rc = qmi_handle_init(handle, SLIMBUS_QMI_POWER_REQ_MAX_MSG_LEN,
+				NULL, qcom_slim_qmi_msg_handlers);
+	if (rc < 0) {
+		dev_err(ctrl->dev, "QMI client init failed: %d\n", rc);
+		goto qmi_handle_init_failed;
+	}
+
+	rc = kernel_connect(handle->sock,
+				(struct sockaddr *)&ctrl->qmi.svc_info,
+				sizeof(ctrl->qmi.svc_info), 0);
+	if (rc < 0) {
+		dev_err(ctrl->dev, "Remote Service connect failed: %d\n", rc);
+		goto qmi_connect_to_service_failed;
+	}
+
+	/* Instance is 0 based */
+	req.instance = (ctrl->ngd->id >> 1);
+	req.mode_valid = 1;
+
+	/* Mode indicates the role of the ADSP */
+	if (apps_is_master)
+		req.mode = SLIMBUS_MODE_SATELLITE_V01;
+	else
+		req.mode = SLIMBUS_MODE_MASTER_V01;
+
+	ctrl->qmi.handle = handle;
+
+	rc = qcom_slim_qmi_send_select_inst_req(ctrl, &req);
+	if (rc) {
+		dev_err(ctrl->dev, "failed to select h/w instance\n");
+		goto qmi_select_instance_failed;
+	}
+
+	return 0;
+
+qmi_select_instance_failed:
+	ctrl->qmi.handle = NULL;
+qmi_connect_to_service_failed:
+	qmi_handle_release(handle);
+qmi_handle_init_failed:
+	devm_kfree(ctrl->dev, handle);
+	return rc;
+}
+
+static void qcom_slim_qmi_exit(struct qcom_slim_ngd_ctrl *ctrl)
+{
+	if (!ctrl->qmi.handle)
+		return;
+
+	qmi_handle_release(ctrl->qmi.handle);
+	devm_kfree(ctrl->dev, ctrl->qmi.handle);
+	ctrl->qmi.handle = NULL;
+}
+
+static int qcom_slim_qmi_power_request(struct qcom_slim_ngd_ctrl *ctrl,
+				       bool active)
+{
+	struct slimbus_power_req_msg_v01 req;
+
+	if (active)
+		req.pm_req = SLIMBUS_PM_ACTIVE_V01;
+	else
+		req.pm_req = SLIMBUS_PM_INACTIVE_V01;
+
+	req.resp_type_valid = 0;
+
+	return qcom_slim_qmi_send_power_request(ctrl, &req);
+}
+
+static u32 *qcom_slim_ngd_tx_msg_get(struct qcom_slim_ngd_ctrl *ctrl, int len,
+				     struct completion *comp)
+{
+	struct qcom_slim_ngd_dma_desc *desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctrl->tx_buf_lock, flags);
+
+	if ((ctrl->tx_tail + 1) % QCOM_SLIM_NGD_DESC_NUM == ctrl->tx_head) {
+		spin_unlock_irqrestore(&ctrl->tx_buf_lock, flags);
+		return NULL;
+	}
+	desc  = &ctrl->txdesc[ctrl->tx_tail];
+	desc->base = ctrl->tx_base + ctrl->tx_tail * SLIM_MSGQ_BUF_LEN;
+	desc->comp = comp;
+	ctrl->tx_tail = (ctrl->tx_tail + 1) % QCOM_SLIM_NGD_DESC_NUM;
+
+	spin_unlock_irqrestore(&ctrl->tx_buf_lock, flags);
+
+	return desc->base;
+}
+
+static void qcom_slim_ngd_tx_msg_dma_cb(void *args)
+{
+	struct qcom_slim_ngd_dma_desc *desc = args;
+	struct qcom_slim_ngd_ctrl *ctrl = desc->ctrl;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctrl->tx_buf_lock, flags);
+
+	if (desc->comp) {
+		complete(desc->comp);
+		desc->comp = NULL;
+	}
+
+	ctrl->tx_head = (ctrl->tx_head + 1) % QCOM_SLIM_NGD_DESC_NUM;
+	spin_unlock_irqrestore(&ctrl->tx_buf_lock, flags);
+}
+
+static int qcom_slim_ngd_tx_msg_post(struct qcom_slim_ngd_ctrl *ctrl,
+				     void *buf, int len)
+{
+	struct qcom_slim_ngd_dma_desc *desc;
+	unsigned long flags;
+	int index, offset;
+
+	spin_lock_irqsave(&ctrl->tx_buf_lock, flags);
+	offset = buf - ctrl->tx_base;
+	index = offset/SLIM_MSGQ_BUF_LEN;
+
+	desc = &ctrl->txdesc[index];
+	desc->phys = ctrl->tx_phys_base + offset;
+	desc->base = ctrl->tx_base + offset;
+	desc->ctrl = ctrl;
+	len = (len + 3) & 0xfc;
+
+	desc->desc = dmaengine_prep_slave_single(ctrl->dma_tx_channel,
+						desc->phys, len,
+						DMA_MEM_TO_DEV,
+						DMA_PREP_INTERRUPT);
+	if (!desc->desc) {
+		dev_err(ctrl->dev, "unable to prepare channel\n");
+		spin_unlock_irqrestore(&ctrl->tx_buf_lock, flags);
+		return -EINVAL;
+	}
+
+	desc->desc->callback = qcom_slim_ngd_tx_msg_dma_cb;
+	desc->desc->callback_param = desc;
+	desc->desc->cookie = dmaengine_submit(desc->desc);
+	dma_async_issue_pending(ctrl->dma_tx_channel);
+	spin_unlock_irqrestore(&ctrl->tx_buf_lock, flags);
+
+	return 0;
+}
+
+static void qcom_slim_ngd_rx(struct qcom_slim_ngd_ctrl *ctrl, u8 *buf)
+{
+	u8 mc, mt, len;
+
+	mt = SLIM_HEADER_GET_MT(buf[0]);
+	len = SLIM_HEADER_GET_RL(buf[0]);
+	mc = SLIM_HEADER_GET_MC(buf[1]);
+
+	if (mc == SLIM_USR_MC_MASTER_CAPABILITY &&
+		mt == SLIM_MSG_MT_SRC_REFERRED_USER)
+		queue_work(ctrl->mwq, &ctrl->m_work);
+
+	if (mc == SLIM_MSG_MC_REPLY_INFORMATION ||
+	    mc == SLIM_MSG_MC_REPLY_VALUE || (mc == SLIM_USR_MC_ADDR_REPLY &&
+	    mt == SLIM_MSG_MT_SRC_REFERRED_USER)) {
+		slim_msg_response(&ctrl->ctrl, &buf[4], buf[3], len - 4);
+		pm_runtime_mark_last_busy(ctrl->dev);
+	}
+}
+
+static void qcom_slim_ngd_rx_msgq_cb(void *args)
+{
+	struct qcom_slim_ngd_dma_desc *desc = args;
+	struct qcom_slim_ngd_ctrl *ctrl = desc->ctrl;
+
+	qcom_slim_ngd_rx(ctrl, (u8 *)desc->base);
+	/* Add descriptor back to the queue */
+	desc->desc = dmaengine_prep_slave_single(ctrl->dma_rx_channel,
+					desc->phys, SLIM_MSGQ_BUF_LEN,
+					DMA_DEV_TO_MEM,
+					DMA_PREP_INTERRUPT);
+	if (!desc->desc) {
+		dev_err(ctrl->dev, "Unable to prepare rx channel\n");
+		return;
+	}
+
+	desc->desc->callback = qcom_slim_ngd_rx_msgq_cb;
+	desc->desc->callback_param = desc;
+	desc->desc->cookie = dmaengine_submit(desc->desc);
+	dma_async_issue_pending(ctrl->dma_rx_channel);
+}
+
+static int qcom_slim_ngd_post_rx_msgq(struct qcom_slim_ngd_ctrl *ctrl)
+{
+	struct qcom_slim_ngd_dma_desc *desc;
+	int i;
+
+	for (i = 0; i < QCOM_SLIM_NGD_DESC_NUM; i++) {
+		desc = &ctrl->rx_desc[i];
+		desc->phys = ctrl->rx_phys_base + i * SLIM_MSGQ_BUF_LEN;
+		desc->ctrl = ctrl;
+		desc->base = ctrl->rx_base + i * SLIM_MSGQ_BUF_LEN;
+		desc->desc = dmaengine_prep_slave_single(ctrl->dma_rx_channel,
+						desc->phys, SLIM_MSGQ_BUF_LEN,
+						DMA_DEV_TO_MEM,
+						DMA_PREP_INTERRUPT);
+		if (!desc->desc) {
+			dev_err(ctrl->dev, "Unable to prepare rx channel\n");
+			return -EINVAL;
+		}
+
+		desc->desc->callback = qcom_slim_ngd_rx_msgq_cb;
+		desc->desc->callback_param = desc;
+		desc->desc->cookie = dmaengine_submit(desc->desc);
+	}
+	dma_async_issue_pending(ctrl->dma_rx_channel);
+
+	return 0;
+}
+
+static int qcom_slim_ngd_init_rx_msgq(struct qcom_slim_ngd_ctrl *ctrl)
+{
+	struct device *dev = ctrl->dev;
+	int ret, size;
+
+	ctrl->dma_rx_channel = dma_request_slave_channel(dev, "rx");
+	if (!ctrl->dma_rx_channel) {
+		dev_err(dev, "Failed to request dma channels");
+		return -EINVAL;
+	}
+
+	size = QCOM_SLIM_NGD_DESC_NUM * SLIM_MSGQ_BUF_LEN;
+	ctrl->rx_base = dma_alloc_coherent(dev, size, &ctrl->rx_phys_base,
+					   GFP_KERNEL);
+	if (!ctrl->rx_base) {
+		dev_err(dev, "dma_alloc_coherent failed\n");
+		ret = -ENOMEM;
+		goto rel_rx;
+	}
+
+	ret = qcom_slim_ngd_post_rx_msgq(ctrl);
+	if (ret) {
+		dev_err(dev, "post_rx_msgq() failed 0x%x\n", ret);
+		goto rx_post_err;
+	}
+
+	return 0;
+
+rx_post_err:
+	dma_free_coherent(dev, size, ctrl->rx_base, ctrl->rx_phys_base);
+rel_rx:
+	dma_release_channel(ctrl->dma_rx_channel);
+	return ret;
+}
+
+static int qcom_slim_ngd_init_tx_msgq(struct qcom_slim_ngd_ctrl *ctrl)
+{
+	struct device *dev = ctrl->dev;
+	unsigned long flags;
+	int ret = 0;
+	int size;
+
+	ctrl->dma_tx_channel = dma_request_slave_channel(dev, "tx");
+	if (!ctrl->dma_tx_channel) {
+		dev_err(dev, "Failed to request dma channels");
+		return -EINVAL;
+	}
+
+	size = ((QCOM_SLIM_NGD_DESC_NUM + 1) * SLIM_MSGQ_BUF_LEN);
+	ctrl->tx_base = dma_alloc_coherent(dev, size, &ctrl->tx_phys_base,
+					   GFP_KERNEL);
+	if (!ctrl->tx_base) {
+		dev_err(dev, "dma_alloc_coherent failed\n");
+		ret = -EINVAL;
+		goto rel_tx;
+	}
+
+	spin_lock_irqsave(&ctrl->tx_buf_lock, flags);
+	ctrl->tx_tail = 0;
+	ctrl->tx_head = 0;
+	spin_unlock_irqrestore(&ctrl->tx_buf_lock, flags);
+
+	return 0;
+rel_tx:
+	dma_release_channel(ctrl->dma_tx_channel);
+	return ret;
+}
+
+static int qcom_slim_ngd_init_dma(struct qcom_slim_ngd_ctrl *ctrl)
+{
+	int ret = 0;
+
+	ret = qcom_slim_ngd_init_rx_msgq(ctrl);
+	if (ret) {
+		dev_err(ctrl->dev, "rx dma init failed\n");
+		return ret;
+	}
+
+	ret = qcom_slim_ngd_init_tx_msgq(ctrl);
+	if (ret)
+		dev_err(ctrl->dev, "tx dma init failed\n");
+
+	return ret;
+}
+
+static irqreturn_t qcom_slim_ngd_interrupt(int irq, void *d)
+{
+	struct qcom_slim_ngd_ctrl *ctrl = d;
+	void __iomem *base = ctrl->ngd->base;
+	u32 stat = readl(base + NGD_INT_STAT);
+
+	if ((stat & NGD_INT_MSG_BUF_CONTE) ||
+		(stat & NGD_INT_MSG_TX_INVAL) || (stat & NGD_INT_DEV_ERR) ||
+		(stat & NGD_INT_TX_NACKED_2)) {
+		dev_err(ctrl->dev, "Error Interrupt received 0x%x\n", stat);
+	}
+
+	writel(stat, base + NGD_INT_CLR);
+
+	return IRQ_HANDLED;
+}
+
+static int qcom_slim_ngd_xfer_msg(struct slim_controller *sctrl,
+				  struct slim_msg_txn *txn)
+{
+	struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(sctrl->dev);
+	DECLARE_COMPLETION_ONSTACK(tx_sent);
+	int ret, timeout;
+	u32 *pbuf;
+	u8 *puc;
+	u8 la = txn->la;
+
+	if (txn->mc & SLIM_MSG_CLK_PAUSE_SEQ_FLG)
+		return -EPROTONOSUPPORT;
+
+	if (txn->mt == SLIM_MSG_MT_CORE &&
+		(txn->mc >= SLIM_MSG_MC_BEGIN_RECONFIGURATION &&
+		 txn->mc <= SLIM_MSG_MC_RECONFIGURE_NOW))
+		return 0;
+
+	if (txn->dt == SLIM_MSG_DEST_ENUMADDR)
+		return -EPROTONOSUPPORT;
+
+	if (txn->msg->num_bytes > SLIM_MSGQ_BUF_LEN ||
+			txn->rl > SLIM_MSGQ_BUF_LEN) {
+		dev_err(ctrl->dev, "msg exeeds HW limit\n");
+		return -EINVAL;
+	}
+
+	pbuf = qcom_slim_ngd_tx_msg_get(ctrl, txn->rl, &tx_sent);
+	if (!pbuf) {
+		dev_err(ctrl->dev, "Message buffer unavailable\n");
+		return -ENOMEM;
+	}
+
+	/* HW expects length field to be excluded */
+	txn->rl--;
+	puc = (u8 *)pbuf;
+	*pbuf = 0;
+	if (txn->dt == SLIM_MSG_DEST_LOGICALADDR) {
+		*pbuf = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, txn->mc, 0,
+				la);
+		puc += 3;
+	} else {
+		*pbuf = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, txn->mc, 1,
+				la);
+		puc += 2;
+	}
+
+	if (slim_tid_txn(txn->mt, txn->mc))
+		*(puc++) = txn->tid;
+
+	if (slim_ec_txn(txn->mt, txn->mc)) {
+		*(puc++) = (txn->ec & 0xFF);
+		*(puc++) = (txn->ec >> 8) & 0xFF;
+	}
+
+	if (txn->msg && txn->msg->wbuf)
+		memcpy(puc, txn->msg->wbuf, txn->msg->num_bytes);
+
+	ret = qcom_slim_ngd_tx_msg_post(ctrl, pbuf, txn->rl);
+	if (ret)
+		return ret;
+
+	timeout = wait_for_completion_timeout(&tx_sent, HZ);
+	if (!timeout) {
+		dev_err(sctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", txn->mc,
+					txn->mt);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int qcom_slim_ngd_xfer_msg_sync(struct slim_controller *ctrl,
+				       struct slim_msg_txn *txn)
+{
+	DECLARE_COMPLETION_ONSTACK(done);
+	int ret, timeout;
+
+	pm_runtime_get_sync(ctrl->dev);
+
+	txn->comp = &done;
+
+	ret = qcom_slim_ngd_xfer_msg(ctrl, txn);
+	if (ret)
+		return ret;
+
+	timeout = wait_for_completion_timeout(&done, HZ);
+	if (!timeout) {
+		dev_err(ctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", txn->mc,
+				txn->mt);
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static int qcom_slim_ngd_get_laddr(struct slim_controller *ctrl,
+				   struct slim_eaddr *ea, u8 *laddr)
+{
+	struct slim_val_inf msg =  {0};
+	struct slim_msg_txn txn;
+	u8 wbuf[10] = {0};
+	u8 rbuf[10] = {0};
+	int ret;
+
+	txn.mt = SLIM_MSG_MT_DEST_REFERRED_USER;
+	txn.dt = SLIM_MSG_DEST_LOGICALADDR;
+	txn.la = SLIM_LA_MGR;
+	txn.ec = 0;
+
+	txn.mc = SLIM_USR_MC_ADDR_QUERY;
+	txn.rl = 11;
+	txn.msg = &msg;
+	txn.msg->num_bytes = 7;
+	txn.msg->wbuf = wbuf;
+	txn.msg->rbuf = rbuf;
+
+	ret = slim_alloc_txn_tid(ctrl, &txn);
+	if (ret < 0)
+		return ret;
+
+	wbuf[0] = (u8)txn.tid;
+	memcpy(&wbuf[1], ea, sizeof(*ea));
+
+	ret = qcom_slim_ngd_xfer_msg_sync(ctrl, &txn);
+	if (ret) {
+		slim_free_txn_tid(ctrl, &txn);
+		return ret;
+	}
+
+	*laddr = rbuf[6];
+
+	return ret;
+}
+
+static int qcom_slim_ngd_exit_dma(struct qcom_slim_ngd_ctrl *ctrl)
+{
+	if (ctrl->dma_rx_channel) {
+		dmaengine_terminate_sync(ctrl->dma_rx_channel);
+		dma_release_channel(ctrl->dma_rx_channel);
+	}
+
+	if (ctrl->dma_tx_channel) {
+		dmaengine_terminate_sync(ctrl->dma_tx_channel);
+		dma_release_channel(ctrl->dma_tx_channel);
+	}
+
+	ctrl->dma_tx_channel = ctrl->dma_rx_channel = NULL;
+
+	return 0;
+}
+
+static void qcom_slim_ngd_setup(struct qcom_slim_ngd_ctrl *ctrl)
+{
+	u32 cfg = readl_relaxed(ctrl->ngd->base);
+
+	if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN)
+		qcom_slim_ngd_init_dma(ctrl);
+
+	/* By default enable message queues */
+	cfg |= NGD_CFG_RX_MSGQ_EN;
+	cfg |= NGD_CFG_TX_MSGQ_EN;
+
+	/* Enable NGD if it's not already enabled*/
+	if (!(cfg & NGD_CFG_ENABLE))
+		cfg |= NGD_CFG_ENABLE;
+
+	writel_relaxed(cfg, ctrl->ngd->base);
+}
+
+static int qcom_slim_ngd_power_up(struct qcom_slim_ngd_ctrl *ctrl)
+{
+	enum qcom_slim_ngd_state cur_state = ctrl->state;
+	struct qcom_slim_ngd *ngd = ctrl->ngd;
+	u32 laddr, rx_msgq;
+	int timeout, ret = 0;
+
+	if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN) {
+		timeout = wait_for_completion_timeout(&ctrl->qmi.qmi_comp, HZ);
+		if (!timeout)
+			return -EREMOTEIO;
+	}
+
+	if (ctrl->state == QCOM_SLIM_NGD_CTRL_ASLEEP ||
+		ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN) {
+		ret = qcom_slim_qmi_power_request(ctrl, true);
+		if (ret) {
+			dev_err(ctrl->dev, "SLIM QMI power request failed:%d\n",
+					ret);
+			return ret;
+		}
+	}
+
+	ctrl->ver = readl_relaxed(ctrl->base);
+	/* Version info in 16 MSbits */
+	ctrl->ver >>= 16;
+
+	laddr = readl_relaxed(ngd->base + NGD_STATUS);
+	if (laddr & NGD_LADDR) {
+		/*
+		 * external MDM restart case where ADSP itself was active framer
+		 * For example, modem restarted when playback was active
+		 */
+		if (cur_state == QCOM_SLIM_NGD_CTRL_AWAKE) {
+			dev_info(ctrl->dev, "Subsys restart: ADSP active framer\n");
+			return 0;
+		}
+		return 0;
+	}
+
+	writel_relaxed(DEF_NGD_INT_MASK, ngd->base + NGD_INT_EN);
+	rx_msgq = readl_relaxed(ngd->base + NGD_RX_MSGQ_CFG);
+
+	writel_relaxed(rx_msgq|SLIM_RX_MSGQ_TIMEOUT_VAL,
+				ngd->base + NGD_RX_MSGQ_CFG);
+	qcom_slim_ngd_setup(ctrl);
+
+	timeout = wait_for_completion_timeout(&ctrl->reconf, HZ);
+	if (!timeout) {
+		dev_err(ctrl->dev, "capability exchange timed-out\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void qcom_slim_ngd_notify_slaves(struct qcom_slim_ngd_ctrl *ctrl)
+{
+	struct slim_device *sbdev;
+	struct device_node *node;
+
+	for_each_child_of_node(ctrl->ngd->pdev->dev.of_node, node) {
+		sbdev = of_slim_get_device(&ctrl->ctrl, node);
+		if (!sbdev)
+			continue;
+
+		if (slim_get_logical_addr(sbdev))
+			dev_err(ctrl->dev, "Failed to get logical address\n");
+	}
+}
+
+static void qcom_slim_ngd_master_worker(struct work_struct *work)
+{
+	struct qcom_slim_ngd_ctrl *ctrl;
+	struct slim_msg_txn txn;
+	struct slim_val_inf msg = {0};
+	int retries = 0;
+	u8 wbuf[8];
+	int ret = 0;
+
+	ctrl = container_of(work, struct qcom_slim_ngd_ctrl, m_work);
+	txn.dt = SLIM_MSG_DEST_LOGICALADDR;
+	txn.ec = 0;
+	txn.mc = SLIM_USR_MC_REPORT_SATELLITE;
+	txn.mt = SLIM_MSG_MT_SRC_REFERRED_USER;
+	txn.la = SLIM_LA_MGR;
+	wbuf[0] = SAT_MAGIC_LSB;
+	wbuf[1] = SAT_MAGIC_MSB;
+	wbuf[2] = SAT_MSG_VER;
+	wbuf[3] = SAT_MSG_PROT;
+	txn.msg = &msg;
+	txn.msg->wbuf = wbuf;
+	txn.msg->num_bytes = 4;
+	txn.rl = 8;
+
+	dev_info(ctrl->dev, "SLIM SAT: Rcvd master capability\n");
+
+capability_retry:
+	ret = qcom_slim_ngd_xfer_msg(&ctrl->ctrl, &txn);
+	if (!ret) {
+		if (ctrl->state >= QCOM_SLIM_NGD_CTRL_ASLEEP)
+			complete(&ctrl->reconf);
+		else
+			dev_err(ctrl->dev, "unexpected state:%d\n",
+						ctrl->state);
+
+		if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN)
+			qcom_slim_ngd_notify_slaves(ctrl);
+
+	} else if (ret == -EIO) {
+		dev_err(ctrl->dev, "capability message NACKed, retrying\n");
+		if (retries < INIT_MX_RETRIES) {
+			msleep(DEF_RETRY_MS);
+			retries++;
+			goto capability_retry;
+		}
+	} else {
+		dev_err(ctrl->dev, "SLIM: capability TX failed:%d\n", ret);
+	}
+}
+
+static int qcom_slim_ngd_runtime_resume(struct device *dev)
+{
+	struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (ctrl->state >= QCOM_SLIM_NGD_CTRL_ASLEEP)
+		ret = qcom_slim_ngd_power_up(ctrl);
+	if (ret) {
+		/* Did SSR cause this power up failure */
+		if (ctrl->state != QCOM_SLIM_NGD_CTRL_DOWN)
+			ctrl->state = QCOM_SLIM_NGD_CTRL_ASLEEP;
+		else
+			dev_err(ctrl->dev, "HW wakeup attempt during SSR\n");
+	} else {
+		ctrl->state = QCOM_SLIM_NGD_CTRL_AWAKE;
+	}
+
+	return 0;
+}
+
+static int qcom_slim_ngd_enable(struct qcom_slim_ngd_ctrl *ctrl, bool enable)
+{
+	if (enable) {
+		int ret = qcom_slim_qmi_init(ctrl, false);
+
+		if (ret) {
+			dev_err(ctrl->dev, "qmi init fail, ret:%d, state:%d\n",
+				ret, ctrl->state);
+			return ret;
+		}
+		/* controller state should be in sync with framework state */
+		complete(&ctrl->qmi.qmi_comp);
+		if (!pm_runtime_enabled(ctrl->dev) ||
+				!pm_runtime_suspended(ctrl->dev))
+			qcom_slim_ngd_runtime_resume(ctrl->dev);
+		else
+			pm_runtime_resume(ctrl->dev);
+		pm_runtime_mark_last_busy(ctrl->dev);
+		pm_runtime_put(ctrl->dev);
+	} else {
+		qcom_slim_qmi_exit(ctrl);
+	}
+
+	return 0;
+}
+
+static int qcom_slim_ngd_qmi_new_server(struct qmi_handle *hdl,
+					struct qmi_service *service)
+{
+	struct qcom_slim_ngd_qmi *qmi =
+		container_of(hdl, struct qcom_slim_ngd_qmi, svc_event_hdl);
+	struct qcom_slim_ngd_ctrl *ctrl =
+		container_of(qmi, struct qcom_slim_ngd_ctrl, qmi);
+
+	qmi->svc_info.sq_family = AF_QIPCRTR;
+	qmi->svc_info.sq_node = service->node;
+	qmi->svc_info.sq_port = service->port;
+
+	qcom_slim_ngd_enable(ctrl, true);
+
+	return 0;
+}
+
+static void qcom_slim_ngd_qmi_del_server(struct qmi_handle *hdl,
+					 struct qmi_service *service)
+{
+	struct qcom_slim_ngd_qmi *qmi =
+		container_of(hdl, struct qcom_slim_ngd_qmi, svc_event_hdl);
+
+	qmi->svc_info.sq_node = 0;
+	qmi->svc_info.sq_port = 0;
+}
+
+static struct qmi_ops qcom_slim_ngd_qmi_svc_event_ops = {
+	.new_server = qcom_slim_ngd_qmi_new_server,
+	.del_server = qcom_slim_ngd_qmi_del_server,
+};
+
+static int qcom_slim_ngd_qmi_svc_event_init(struct qcom_slim_ngd_ctrl *ctrl)
+{
+	struct qcom_slim_ngd_qmi *qmi = &ctrl->qmi;
+	int ret;
+
+	ret = qmi_handle_init(&qmi->svc_event_hdl, 0,
+				&qcom_slim_ngd_qmi_svc_event_ops, NULL);
+	if (ret < 0) {
+		dev_err(ctrl->dev, "qmi_handle_init failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = qmi_add_lookup(&qmi->svc_event_hdl, SLIMBUS_QMI_SVC_ID,
+			SLIMBUS_QMI_SVC_V1, SLIMBUS_QMI_INS_ID);
+	if (ret < 0) {
+		dev_err(ctrl->dev, "qmi_add_lookup failed: %d\n", ret);
+		qmi_handle_release(&qmi->svc_event_hdl);
+	}
+	return ret;
+}
+
+static void qcom_slim_ngd_qmi_svc_event_deinit(struct qcom_slim_ngd_qmi *qmi)
+{
+	qmi_handle_release(&qmi->svc_event_hdl);
+}
+
+static struct platform_driver qcom_slim_ngd_driver;
+#define QCOM_SLIM_NGD_DRV_NAME	"qcom,slim-ngd"
+
+static const struct of_device_id qcom_slim_ngd_dt_match[] = {
+	{
+		.compatible = "qcom,slim-ngd-v1.5.0",
+		.data = &ngd_v1_5_offset_info,
+	},
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, qcom_slim_ngd_dt_match);
+
+static int of_qcom_slim_ngd_register(struct device *parent,
+				     struct qcom_slim_ngd_ctrl *ctrl)
+{
+	const struct ngd_reg_offset_data *data;
+	struct qcom_slim_ngd *ngd;
+	struct device_node *node;
+	u32 id;
+
+	data = of_match_node(qcom_slim_ngd_dt_match, parent->of_node)->data;
+
+	for_each_available_child_of_node(parent->of_node, node) {
+		if (of_property_read_u32(node, "reg", &id))
+			continue;
+
+		ngd = kzalloc(sizeof(*ngd), GFP_KERNEL);
+		if (!ngd)
+			return -ENOMEM;
+
+		ngd->pdev = platform_device_alloc(QCOM_SLIM_NGD_DRV_NAME, id);
+		ngd->id = id;
+		ngd->pdev->dev.parent = parent;
+		ngd->pdev->driver_override = QCOM_SLIM_NGD_DRV_NAME;
+		ngd->pdev->dev.of_node = node;
+		ctrl->ngd = ngd;
+		platform_set_drvdata(ngd->pdev, ctrl);
+
+		platform_device_add(ngd->pdev);
+		ngd->base = ctrl->base + ngd->id * data->offset +
+					(ngd->id - 1) * data->size;
+		ctrl->ngd = ngd;
+		platform_driver_register(&qcom_slim_ngd_driver);
+
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static int qcom_slim_ngd_probe(struct platform_device *pdev)
+{
+	struct qcom_slim_ngd_ctrl *ctrl = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ctrl->ctrl.dev = dev;
+	ret = slim_register_controller(&ctrl->ctrl);
+	if (ret) {
+		dev_err(dev, "error adding slim controller\n");
+		return ret;
+	}
+
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_autosuspend_delay(dev, QCOM_SLIM_NGD_AUTOSUSPEND);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_get_noresume(dev);
+	ret = qcom_slim_ngd_qmi_svc_event_init(ctrl);
+	if (ret) {
+		dev_err(&pdev->dev, "QMI service registration failed:%d", ret);
+		goto err;
+	}
+
+	INIT_WORK(&ctrl->m_work, qcom_slim_ngd_master_worker);
+	ctrl->mwq = create_singlethread_workqueue("ngd_master");
+	if (!ctrl->mwq) {
+		dev_err(&pdev->dev, "Failed to start master worker\n");
+		ret = -ENOMEM;
+		goto wq_err;
+	}
+
+	return 0;
+err:
+	slim_unregister_controller(&ctrl->ctrl);
+wq_err:
+	qcom_slim_ngd_qmi_svc_event_deinit(&ctrl->qmi);
+	if (ctrl->mwq)
+		destroy_workqueue(ctrl->mwq);
+
+	return 0;
+}
+
+static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct qcom_slim_ngd_ctrl *ctrl;
+	struct resource *res;
+	int ret;
+
+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, ctrl);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ctrl->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ctrl->base))
+		return PTR_ERR(ctrl->base);
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no slimbus IRQ resource\n");
+		return -ENODEV;
+	}
+
+	ret = devm_request_irq(dev, res->start, qcom_slim_ngd_interrupt,
+			       IRQF_TRIGGER_HIGH, "slim-ngd", ctrl);
+	if (ret) {
+		dev_err(&pdev->dev, "request IRQ failed\n");
+		return ret;
+	}
+
+	ctrl->dev = dev;
+	ctrl->framer.rootfreq = SLIM_ROOT_FREQ >> 3;
+	ctrl->framer.superfreq =
+		ctrl->framer.rootfreq / SLIM_CL_PER_SUPERFRAME_DIV8;
+
+	ctrl->ctrl.a_framer = &ctrl->framer;
+	ctrl->ctrl.clkgear = SLIM_MAX_CLK_GEAR;
+	ctrl->ctrl.get_laddr = qcom_slim_ngd_get_laddr;
+	ctrl->ctrl.xfer_msg = qcom_slim_ngd_xfer_msg;
+	ctrl->ctrl.wakeup = NULL;
+	ctrl->state = QCOM_SLIM_NGD_CTRL_DOWN;
+
+	spin_lock_init(&ctrl->tx_buf_lock);
+	init_completion(&ctrl->reconf);
+	init_completion(&ctrl->qmi.qmi_comp);
+
+	return of_qcom_slim_ngd_register(dev, ctrl);
+}
+
+static int qcom_slim_ngd_ctrl_remove(struct platform_device *pdev)
+{
+	platform_driver_unregister(&qcom_slim_ngd_driver);
+
+	return 0;
+}
+
+static int qcom_slim_ngd_remove(struct platform_device *pdev)
+{
+	struct qcom_slim_ngd_ctrl *ctrl = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+	slim_unregister_controller(&ctrl->ctrl);
+	qcom_slim_ngd_exit_dma(ctrl);
+	qcom_slim_ngd_qmi_svc_event_deinit(&ctrl->qmi);
+	if (ctrl->mwq)
+		destroy_workqueue(ctrl->mwq);
+
+	kfree(ctrl->ngd);
+	ctrl->ngd = NULL;
+	return 0;
+}
+
+static int qcom_slim_ngd_runtime_idle(struct device *dev)
+{
+	struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev);
+
+	if (ctrl->state == QCOM_SLIM_NGD_CTRL_AWAKE)
+		ctrl->state = QCOM_SLIM_NGD_CTRL_IDLE;
+	pm_request_autosuspend(dev);
+	return -EAGAIN;
+}
+
+#ifdef CONFIG_PM
+static int qcom_slim_ngd_runtime_suspend(struct device *dev)
+{
+	struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = qcom_slim_qmi_power_request(ctrl, false);
+	if (ret && ret != -EBUSY)
+		dev_info(ctrl->dev, "slim resource not idle:%d\n", ret);
+	if (!ret || ret == -ETIMEDOUT)
+		ctrl->state = QCOM_SLIM_NGD_CTRL_ASLEEP;
+
+	return ret;
+}
+#endif
+
+static const struct dev_pm_ops qcom_slim_ngd_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(
+		qcom_slim_ngd_runtime_suspend,
+		qcom_slim_ngd_runtime_resume,
+		qcom_slim_ngd_runtime_idle
+	)
+};
+
+static struct platform_driver qcom_slim_ngd_ctrl_driver = {
+	.probe = qcom_slim_ngd_ctrl_probe,
+	.remove = qcom_slim_ngd_ctrl_remove,
+	.driver	= {
+		.name = "qcom,slim-ngd-ctrl",
+		.of_match_table = qcom_slim_ngd_dt_match,
+	},
+};
+
+static struct platform_driver qcom_slim_ngd_driver = {
+	.probe = qcom_slim_ngd_probe,
+	.remove = qcom_slim_ngd_remove,
+	.driver	= {
+		.name = QCOM_SLIM_NGD_DRV_NAME,
+		.pm = &qcom_slim_ngd_dev_pm_ops,
+	},
+};
+
+module_platform_driver(qcom_slim_ngd_ctrl_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Qualcomm SLIMBus NGD controller");
diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h
index 2ba6545fa716..63229e8cd050 100644
--- a/drivers/slimbus/slimbus.h
+++ b/drivers/slimbus/slimbus.h
@@ -17,6 +17,8 @@
 
 /* SLIMbus message types. Related to interpretation of message code. */
 #define SLIM_MSG_MT_CORE			0x0
+#define SLIM_MSG_MT_DEST_REFERRED_USER		0x2
+#define SLIM_MSG_MT_SRC_REFERRED_USER		0x6
 
 /*
  * SLIM Broadcast header format
@@ -48,6 +50,12 @@
 #define SLIM_MSG_MC_NEXT_PAUSE_CLOCK             0x4A
 #define SLIM_MSG_MC_RECONFIGURE_NOW              0x5F
 
+/*
+ * Clock pause flag to indicate that the reconfig message
+ * corresponds to clock pause sequence
+ */
+#define SLIM_MSG_CLK_PAUSE_SEQ_FLG		(1U << 8)
+
 /* Clock pause values per SLIMbus spec */
 #define SLIM_CLK_FAST				0
 #define SLIM_CLK_CONST_PHASE			1
-- 
2.16.2