* [PATCH 1/2] ARM: mxs_defconfig: use MXSFB DRM driver
@ 2018-07-12 10:59 Stefan Agner
2018-07-12 10:59 ` [PATCH 2/2] ARM: imx_v6_v7_defconfig: " Stefan Agner
2018-07-17 3:47 ` [PATCH 1/2] ARM: mxs_defconfig: " Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Stefan Agner @ 2018-07-12 10:59 UTC (permalink / raw)
To: shawnguo, s.hauer
Cc: kernel, marek.vasut, fabio.estevam, leonard.crestez, linux-imx,
linux-arm-kernel, linux-kernel, Stefan Agner
Use the the DRM driver for MXSFB LCD controller (used in i.MX23/
i.MX28/i.MX6SX or i.MX7). Remove CONFIG_FB_MXS which will soon be
removed.
Note that this does not remove CONFIG_FB. CONFIG_FB gets selected
implicity by CONFIG_DRM/CONFIG_DRM_KMS_FB_HELPER.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
arch/arm/configs/mxs_defconfig | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index a508eb302e7a..148226e36152 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -94,8 +94,9 @@ CONFIG_STMP3XXX_RTC_WATCHDOG=y
CONFIG_MFD_MXS_LRADC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_FB=y
-CONFIG_FB_MXS=y
+CONFIG_DRM=y
+CONFIG_DRM_MXSFB=y
+CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
--
2.18.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] ARM: imx_v6_v7_defconfig: use MXSFB DRM driver
2018-07-12 10:59 [PATCH 1/2] ARM: mxs_defconfig: use MXSFB DRM driver Stefan Agner
@ 2018-07-12 10:59 ` Stefan Agner
2018-07-17 3:47 ` [PATCH 1/2] ARM: mxs_defconfig: " Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Stefan Agner @ 2018-07-12 10:59 UTC (permalink / raw)
To: shawnguo, s.hauer
Cc: kernel, marek.vasut, fabio.estevam, leonard.crestez, linux-imx,
linux-arm-kernel, linux-kernel, Stefan Agner
Use the the DRM driver for MXSFB LCD controller (used in i.MX23/
i.MX28/i.MX6SX or i.MX7). Remove CONFIG_FB_MXS which will soon be
removed.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
arch/arm/configs/imx_v6_v7_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 200ebda47e0c..14de85178793 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -266,7 +266,8 @@ CONFIG_DRM_IMX_TVE=y
CONFIG_DRM_IMX_LDB=y
CONFIG_DRM_IMX_HDMI=y
CONFIG_DRM_ETNAVIV=y
-CONFIG_FB_MXS=y
+CONFIG_DRM_MXSFB=y
+CONFIG_FB_MODE_HELPERS=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_PLATFORM=y
--
2.18.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] ARM: mxs_defconfig: use MXSFB DRM driver
2018-07-12 10:59 [PATCH 1/2] ARM: mxs_defconfig: use MXSFB DRM driver Stefan Agner
2018-07-12 10:59 ` [PATCH 2/2] ARM: imx_v6_v7_defconfig: " Stefan Agner
@ 2018-07-17 3:47 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2018-07-17 3:47 UTC (permalink / raw)
To: Stefan Agner
Cc: s.hauer, kernel, marek.vasut, fabio.estevam, leonard.crestez,
linux-imx, linux-arm-kernel, linux-kernel
On Thu, Jul 12, 2018 at 12:59:41PM +0200, Stefan Agner wrote:
> Use the the DRM driver for MXSFB LCD controller (used in i.MX23/
> i.MX28/i.MX6SX or i.MX7). Remove CONFIG_FB_MXS which will soon be
> removed.
>
> Note that this does not remove CONFIG_FB. CONFIG_FB gets selected
> implicity by CONFIG_DRM/CONFIG_DRM_KMS_FB_HELPER.
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
Applied both, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-07-17 3:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-12 10:59 [PATCH 1/2] ARM: mxs_defconfig: use MXSFB DRM driver Stefan Agner
2018-07-12 10:59 ` [PATCH 2/2] ARM: imx_v6_v7_defconfig: " Stefan Agner
2018-07-17 3:47 ` [PATCH 1/2] ARM: mxs_defconfig: " Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).