linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: p.zabel@pengutronix.de, robh+dt@kernel.org,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, ohad@wizery.com,
	mark.rutland@arm.com, sricharan@codeaurora.org,
	akdwived@codeaurora.org, linux-arm-msm@vger.kernel.org,
	tsoni@codeaurora.org
Subject: Re: [PATCH v2 1/6] dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
Date: Mon, 27 Aug 2018 17:33:02 -0700	[thread overview]
Message-ID: <20180828003302.GE2523@minitux> (raw)
In-Reply-To: <20180824131900.5353-2-sibis@codeaurora.org>

On Fri 24 Aug 06:18 PDT 2018, Sibi Sankar wrote:

> Add PDC Global(Power Domain Controller) binding for SDM845 SoCs.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  .../bindings/reset/qcom,pdc-global.txt        | 52 +++++++++++++++++++
>  include/dt-bindings/reset/qcom,sdm845-pdc.h   | 20 +++++++
>  2 files changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
>  create mode 100644 include/dt-bindings/reset/qcom,sdm845-pdc.h
> 
> diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
> new file mode 100644
> index 000000000000..69f9edca9503
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
> @@ -0,0 +1,52 @@
> +PDC Global
> +======================================
> +
> +This binding describes a reset-controller found on PDC-Global(Power Domain
> +Controller) block for Qualcomm Technologies Inc SDM845 SoCs.
> +
> +Required properties:
> +- compatible:
> +	Usage: required
> +	Value type: <string>
> +	Definition: must be:
> +		    "qcom,sdm845-pdc-global"
> +
> +- reg:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: must specify the base address and size of the register
> +	            space.
> +
> +- #reset-cells:
> +	Usage: required
> +	Value type: <uint>
> +	Definition: must be 1; cell entry represents the reset index.
> +
> +Example:
> +
> +pdc_reset: reset-controller@b2e0000 {
> +	compatible = "qcom,sdm845-pdc-global";
> +	reg = <0xb2e0000 0x20000>;
> +	#reset-cells = <1>;
> +};
> +
> +PDC reset clients
> +======================================
> +
> +Device nodes that need access to reset lines should
> +specify them as a reset phandle in their corresponding node as
> +specified in reset.txt.
> +
> +For list of all valid reset indicies see
> +<dt-bindings/reset/qcom,sdm845-pdc.h>
> +
> +Example:
> +
> +modem-pil@4080000 {
> +	...
> +
> +	resets = <&pdc_reset PDC_MODEM_SYNC_RESET>;
> +	reset-names = "pdc_reset";
> +
> +	...
> +};
> diff --git a/include/dt-bindings/reset/qcom,sdm845-pdc.h b/include/dt-bindings/reset/qcom,sdm845-pdc.h
> new file mode 100644
> index 000000000000..53c37f9c319a
> --- /dev/null
> +++ b/include/dt-bindings/reset/qcom,sdm845-pdc.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2018 The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_RESET_PDC_SDM_845_H
> +#define _DT_BINDINGS_RESET_PDC_SDM_845_H
> +
> +#define PDC_APPS_SYNC_RESET	0
> +#define PDC_SP_SYNC_RESET	1
> +#define PDC_AUDIO_SYNC_RESET	2
> +#define PDC_SENSORS_SYNC_RESET	3
> +#define PDC_AOP_SYNC_RESET	4
> +#define PDC_DEBUG_SYNC_RESET	5
> +#define PDC_GPU_SYNC_RESET	6
> +#define PDC_DISPLAY_SYNC_RESET	7
> +#define PDC_COMPUTE_SYNC_RESET	8
> +#define PDC_MODEM_SYNC_RESET	9
> +
> +#endif
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

  reply	other threads:[~2018-08-28  0:33 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-24 13:18 [PATCH v2 0/6] Add support for PDC Global on SDM845 SoCs Sibi Sankar
2018-08-24 13:18 ` [PATCH v2 1/6] dt-bindings: reset: Add PDC Global binding for " Sibi Sankar
2018-08-28  0:33   ` Bjorn Andersson [this message]
2018-08-28  0:38   ` Matthias Kaehlcke
2018-08-28  6:08     ` sibis
2018-08-28 17:11       ` Matthias Kaehlcke
2018-08-29  0:43   ` Rob Herring
2018-08-24 13:18 ` [PATCH v2 2/6] reset: qcom: PDC Global (Power Domain Controller) reset controller Sibi Sankar
2018-08-28  0:22   ` Matthias Kaehlcke
2018-08-28  3:02     ` Bjorn Andersson
2018-08-28  7:11       ` Sibi Sankar
2018-08-28 16:56       ` Matthias Kaehlcke
2018-08-24 13:18 ` [PATCH v2 3/6] dt-bindings: remoteproc: Remove additional definition tag Sibi Sankar
2018-08-28  0:44   ` Matthias Kaehlcke
2018-08-29 16:38     ` Sibi Sankar
2018-08-24 13:18 ` [PATCH v2 4/6] dt-bindings: remoteproc: Add PDC reset binding for Q6V5 PIL Sibi Sankar
2018-08-29  0:44   ` Rob Herring
2018-08-24 13:18 ` [PATCH v2 5/6] remoteproc: qcom: q6v5-pil: Explicitly get mss_restart line Sibi Sankar
2018-08-24 13:19 ` [PATCH v2 6/6] remoteproc: qcom: q6v5-pil: Add PDC reset for modem on SDM845 SoCs Sibi Sankar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180828003302.GE2523@minitux \
    --to=bjorn.andersson@linaro.org \
    --cc=akdwived@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=ohad@wizery.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=sibis@codeaurora.org \
    --cc=sricharan@codeaurora.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).