* [v3] arm64: dts: lx2160a: add sata node support
@ 2019-01-17 2:12 Peng Ma
2019-01-22 5:35 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Peng Ma @ 2019-01-17 2:12 UTC (permalink / raw)
To: shawnguo
Cc: leoyang.li, robh+dt, mark.rutland, linux-arm-kernel, devicetree,
linux-kernel, andy.tang, Peng Ma
Add SATA device nodes for fsl-lx2160a and enable support
for QDS and RDB boards.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
---
changed for V3:
- updated the commit log
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 +++++++++++++++++++++
3 files changed, 76 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 99a22ab..1a5acf6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -95,6 +95,22 @@
};
};
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&sata2 {
+ status = "okay";
+};
+
+&sata3 {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 6481e5f..5b6799e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -102,6 +102,22 @@
};
};
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&sata2 {
+ status = "okay";
+};
+
+&sata3 {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index a79f5c1..592034b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -671,6 +671,50 @@
status = "disabled";
};
+ sata0: sata@3200000 {
+ compatible = "fsl,lx2160a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x7 0x100520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ sata1: sata@3210000 {
+ compatible = "fsl,lx2160a-ahci";
+ reg = <0x0 0x3210000 0x0 0x10000>,
+ <0x7 0x100520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ sata2: sata@3220000 {
+ compatible = "fsl,lx2160a-ahci";
+ reg = <0x0 0x3220000 0x0 0x10000>,
+ <0x7 0x100520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ sata3: sata@3230000 {
+ compatible = "fsl,lx2160a-ahci";
+ reg = <0x0 0x3230000 0x0 0x10000>,
+ <0x7 0x100520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ status = "disabled";
+ };
+
smmu: iommu@5000000 {
compatible = "arm,mmu-500";
reg = <0 0x5000000 0 0x800000>;
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [v3] arm64: dts: lx2160a: add sata node support
2019-01-17 2:12 [v3] arm64: dts: lx2160a: add sata node support Peng Ma
@ 2019-01-22 5:35 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2019-01-22 5:35 UTC (permalink / raw)
To: Peng Ma
Cc: leoyang.li, robh+dt, mark.rutland, linux-arm-kernel, devicetree,
linux-kernel, andy.tang
On Thu, Jan 17, 2019 at 02:12:24AM +0000, Peng Ma wrote:
> Add SATA device nodes for fsl-lx2160a and enable support
> for QDS and RDB boards.
>
> Signed-off-by: Peng Ma <peng.ma@nxp.com>
> ---
> changed for V3:
> - updated the commit log
>
> arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++
> arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++
> arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 +++++++++++++++++++++
> 3 files changed, 76 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> index 99a22ab..1a5acf6 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> @@ -95,6 +95,22 @@
> };
> };
>
> +&sata0 {
> + status = "okay";
> +};
> +
> +&sata1 {
> + status = "okay";
> +};
> +
> +&sata2 {
> + status = "okay";
> +};
> +
> +&sata3 {
> + status = "okay";
> +};
> +
> &uart0 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> index 6481e5f..5b6799e 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> @@ -102,6 +102,22 @@
> };
> };
>
> +&sata0 {
> + status = "okay";
> +};
> +
> +&sata1 {
> + status = "okay";
> +};
> +
> +&sata2 {
> + status = "okay";
> +};
> +
> +&sata3 {
> + status = "okay";
> +};
> +
> &uart0 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index a79f5c1..592034b 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -671,6 +671,50 @@
> status = "disabled";
> };
>
> + sata0: sata@3200000 {
> + compatible = "fsl,lx2160a-ahci";
I can not find this compatible in any bindings doc.
Shawn
> + reg = <0x0 0x3200000 0x0 0x10000>,
> + <0x7 0x100520 0x0 0x4>;
> + reg-names = "ahci", "sata-ecc";
> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 3>;
> + dma-coherent;
> + status = "disabled";
> + };
> +
> + sata1: sata@3210000 {
> + compatible = "fsl,lx2160a-ahci";
> + reg = <0x0 0x3210000 0x0 0x10000>,
> + <0x7 0x100520 0x0 0x4>;
> + reg-names = "ahci", "sata-ecc";
> + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 3>;
> + dma-coherent;
> + status = "disabled";
> + };
> +
> + sata2: sata@3220000 {
> + compatible = "fsl,lx2160a-ahci";
> + reg = <0x0 0x3220000 0x0 0x10000>,
> + <0x7 0x100520 0x0 0x4>;
> + reg-names = "ahci", "sata-ecc";
> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 3>;
> + dma-coherent;
> + status = "disabled";
> + };
> +
> + sata3: sata@3230000 {
> + compatible = "fsl,lx2160a-ahci";
> + reg = <0x0 0x3230000 0x0 0x10000>,
> + <0x7 0x100520 0x0 0x4>;
> + reg-names = "ahci", "sata-ecc";
> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 3>;
> + dma-coherent;
> + status = "disabled";
> + };
> +
> smmu: iommu@5000000 {
> compatible = "arm,mmu-500";
> reg = <0 0x5000000 0 0x800000>;
> --
> 1.7.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-01-22 5:36 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-17 2:12 [v3] arm64: dts: lx2160a: add sata node support Peng Ma
2019-01-22 5:35 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).