* [PATCH] Bluetooth: Add new 13d3:3491 QCA_ROME device
@ 2019-05-23 20:32 João Paulo Rechi Vita
2019-05-23 20:32 ` [PATCH] Bluetooth: Add new 13d3:3501 " João Paulo Rechi Vita
2019-07-06 11:06 ` [PATCH] Bluetooth: Add new 13d3:3491 " Marcel Holtmann
0 siblings, 2 replies; 4+ messages in thread
From: João Paulo Rechi Vita @ 2019-05-23 20:32 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, linux-bluetooth
Cc: linux-kernel, linux, João Paulo Rechi Vita
Without the QCA ROME setup routine this adapter fails to establish a SCO
connection.
T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3491 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
---
drivers/bluetooth/btusb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index ff44622ea10d..4c9f11766e82 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -279,6 +279,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME },
+ { USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME },
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] Bluetooth: Add new 13d3:3501 QCA_ROME device
2019-05-23 20:32 [PATCH] Bluetooth: Add new 13d3:3491 QCA_ROME device João Paulo Rechi Vita
@ 2019-05-23 20:32 ` João Paulo Rechi Vita
2019-07-06 11:05 ` Marcel Holtmann
2019-07-06 11:06 ` [PATCH] Bluetooth: Add new 13d3:3491 " Marcel Holtmann
1 sibling, 1 reply; 4+ messages in thread
From: João Paulo Rechi Vita @ 2019-05-23 20:32 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, linux-bluetooth
Cc: linux-kernel, linux, João Paulo Rechi Vita
Without the QCA ROME setup routine this adapter fails to establish a SCO
connection.
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3501 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
---
drivers/bluetooth/btusb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7db48ae65cd2..ff44622ea10d 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -280,6 +280,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME },
+ { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] Bluetooth: Add new 13d3:3501 QCA_ROME device
2019-05-23 20:32 ` [PATCH] Bluetooth: Add new 13d3:3501 " João Paulo Rechi Vita
@ 2019-07-06 11:05 ` Marcel Holtmann
0 siblings, 0 replies; 4+ messages in thread
From: Marcel Holtmann @ 2019-07-06 11:05 UTC (permalink / raw)
To: João Paulo Rechi Vita
Cc: Johan Hedberg, linux-bluetooth, linux-kernel, linux,
João Paulo Rechi Vita
Hi Joao Paulo,
> Without the QCA ROME setup routine this adapter fails to establish a SCO
> connection.
>
> T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3501 Rev=00.01
> C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>
> Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
> ---
> drivers/bluetooth/btusb.c | 1 +
> 1 file changed, 1 insertion(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] Bluetooth: Add new 13d3:3491 QCA_ROME device
2019-05-23 20:32 [PATCH] Bluetooth: Add new 13d3:3491 QCA_ROME device João Paulo Rechi Vita
2019-05-23 20:32 ` [PATCH] Bluetooth: Add new 13d3:3501 " João Paulo Rechi Vita
@ 2019-07-06 11:06 ` Marcel Holtmann
1 sibling, 0 replies; 4+ messages in thread
From: Marcel Holtmann @ 2019-07-06 11:06 UTC (permalink / raw)
To: João Paulo Rechi Vita
Cc: Johan Hedberg, linux-bluetooth, linux-kernel, linux,
João Paulo Rechi Vita
Hi Joao Paulo,
> Without the QCA ROME setup routine this adapter fails to establish a SCO
> connection.
>
> T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3491 Rev=00.01
> C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>
> Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
> ---
> drivers/bluetooth/btusb.c | 1 +
> 1 file changed, 1 insertion(+)
Patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-07-06 11:06 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-23 20:32 [PATCH] Bluetooth: Add new 13d3:3491 QCA_ROME device João Paulo Rechi Vita
2019-05-23 20:32 ` [PATCH] Bluetooth: Add new 13d3:3501 " João Paulo Rechi Vita
2019-07-06 11:05 ` Marcel Holtmann
2019-07-06 11:06 ` [PATCH] Bluetooth: Add new 13d3:3491 " Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).