[PATCH v8 10/28] x86/asm/entry: annotate interrupt symbols properly

[Jiri Slaby <jslaby@suse.cz>]

* annotate functions properly by SYM_CODE_START, SYM_CODE_START_LOCAL*
  and SYM_CODE_END -- these are not C-like functions, so we have to
  annotate them using CODE.
* use SYM_INNER_LABEL* for labels being in the middle of other functions

[v4] alignments preserved

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>
---
 arch/x86/entry/entry_32.S | 28 ++++++++++++++--------------
 arch/x86/entry/entry_64.S | 13 ++++++-------
 2 files changed, 20 insertions(+), 21 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index f83ca5aa8b77..f37ff583cecb 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -807,8 +807,7 @@ END(ret_from_fork)
  */
 
 	# userspace resumption stub bypassing syscall exit tracing
-	ALIGN
-ret_from_exception:
+SYM_CODE_START_LOCAL(ret_from_exception)
 	preempt_stop(CLBR_ANY)
 ret_from_intr:
 #ifdef CONFIG_VM86
@@ -825,13 +824,13 @@ ret_from_intr:
 	cmpl	$USER_RPL, %eax
 	jb	restore_all_kernel		# not returning to v8086 or userspace
 
-ENTRY(resume_userspace)
+SYM_INNER_LABEL_ALIGN(resume_userspace, SYM_L_LOCAL)
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	movl	%esp, %eax
 	call	prepare_exit_to_usermode
 	jmp	restore_all
-END(ret_from_exception)
+SYM_CODE_END(ret_from_exception)
 
 GLOBAL(__begin_SYSENTER_singlestep_region)
 /*
@@ -1100,7 +1099,7 @@ restore_all_kernel:
 	jmp	.Lirq_return
 
 .section .fixup, "ax"
-ENTRY(iret_exc	)
+SYM_CODE_START(iret_exc)
 	pushl	$0				# no error code
 	pushl	$do_iret_error
 
@@ -1117,6 +1116,7 @@ ENTRY(iret_exc	)
 #endif
 
 	jmp	common_exception
+SYM_CODE_END(iret_exc)
 .previous
 	_ASM_EXTABLE(.Lirq_return, iret_exc)
 ENDPROC(entry_INT80_32)
@@ -1182,7 +1182,7 @@ ENTRY(spurious_entries_start)
     .endr
 END(spurious_entries_start)
 
-common_spurious:
+SYM_CODE_START_LOCAL(common_spurious)
 	ASM_CLAC
 	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
 	SAVE_ALL switch_stacks=1
@@ -1191,7 +1191,7 @@ common_spurious:
 	movl	%esp, %eax
 	call	smp_spurious_interrupt
 	jmp	ret_from_intr
-ENDPROC(common_spurious)
+SYM_CODE_END(common_spurious)
 #endif
 
 /*
@@ -1199,7 +1199,7 @@ ENDPROC(common_spurious)
  * so IRQ-flags tracing has to follow that:
  */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
+SYM_CODE_START_LOCAL(common_interrupt)
 	ASM_CLAC
 	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
 
@@ -1209,7 +1209,7 @@ common_interrupt:
 	movl	%esp, %eax
 	call	do_IRQ
 	jmp	ret_from_intr
-ENDPROC(common_interrupt)
+SYM_CODE_END(common_interrupt)
 
 #define BUILD_INTERRUPT3(name, nr, fn)			\
 ENTRY(name)						\
@@ -1361,7 +1361,7 @@ ENTRY(xen_hypervisor_callback)
 
 	jmp	xen_iret_crit_fixup
 
-ENTRY(xen_do_upcall)
+SYM_INNER_LABEL_ALIGN(xen_do_upcall, SYM_L_GLOBAL)
 1:	mov	%esp, %eax
 	call	xen_evtchn_do_upcall
 #ifndef CONFIG_PREEMPTION
@@ -1447,7 +1447,7 @@ ENTRY(page_fault)
 	jmp	common_exception_read_cr2
 END(page_fault)
 
-common_exception_read_cr2:
+SYM_CODE_START_LOCAL_NOALIGN(common_exception_read_cr2)
 	/* the function address is in %gs's slot on the stack */
 	SAVE_ALL switch_stacks=1 skip_gs=1
 
@@ -1470,9 +1470,9 @@ common_exception_read_cr2:
 	movl	%esp, %eax			# pt_regs pointer
 	CALL_NOSPEC %edi
 	jmp	ret_from_exception
-END(common_exception_read_cr2)
+SYM_CODE_END(common_exception_read_cr2)
 
-common_exception:
+SYM_CODE_START_LOCAL_NOALIGN(common_exception)
 	/* the function address is in %gs's slot on the stack */
 	SAVE_ALL switch_stacks=1 skip_gs=1
 	ENCODE_FRAME_POINTER
@@ -1492,7 +1492,7 @@ common_exception:
 	movl	%esp, %eax			# pt_regs pointer
 	CALL_NOSPEC %edi
 	jmp	ret_from_exception
-END(common_exception)
+SYM_CODE_END(common_exception)
 
 ENTRY(debug)
 	/*
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 68cb3a9ee65e..6c382ccbdeb5 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -587,18 +587,18 @@ _ASM_NOKPROBE(interrupt_entry)
  * The interrupt stubs push (~vector+0x80) onto the stack and
  * then jump to common_spurious/interrupt.
  */
-common_spurious:
+SYM_CODE_START_LOCAL(common_spurious)
 	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
 	call	interrupt_entry
 	UNWIND_HINT_REGS indirect=1
 	call	smp_spurious_interrupt		/* rdi points to pt_regs */
 	jmp	ret_from_intr
-END(common_spurious)
+SYM_CODE_END(common_spurious)
 _ASM_NOKPROBE(common_spurious)
 
 /* common_interrupt is a hotpath. Align it */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
+SYM_CODE_START_LOCAL(common_interrupt)
 	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
 	call	interrupt_entry
 	UNWIND_HINT_REGS indirect=1
@@ -693,7 +693,7 @@ GLOBAL(restore_regs_and_return_to_kernel)
 	 */
 	INTERRUPT_RETURN
 
-ENTRY(native_iret)
+SYM_INNER_LABEL_ALIGN(native_iret, SYM_L_GLOBAL)
 	UNWIND_HINT_IRET_REGS
 	/*
 	 * Are we returning to a stack segment from the LDT?  Note: in
@@ -704,8 +704,7 @@ ENTRY(native_iret)
 	jnz	native_irq_return_ldt
 #endif
 
-.global native_irq_return_iret
-native_irq_return_iret:
+SYM_INNER_LABEL(native_irq_return_iret, SYM_L_GLOBAL)
 	/*
 	 * This may fault.  Non-paranoid faults on return to userspace are
 	 * handled by fixup_bad_iret.  These include #SS, #GP, and #NP.
@@ -787,7 +786,7 @@ native_irq_return_ldt:
 	 */
 	jmp	native_irq_return_iret
 #endif
-END(common_interrupt)
+SYM_CODE_END(common_interrupt)
 _ASM_NOKPROBE(common_interrupt)
 
 /*
-- 
2.22.0