From: Jiri Slaby <jslaby@suse.cz>
To: bp@alien8.de
Cc: tglx@linutronix.de, mingo@redhat.com, hpa@zytor.com,
x86@kernel.org, linux-arch@vger.kernel.org,
linux-kernel@vger.kernel.org, Jiri Slaby <jslaby@suse.cz>
Subject: [PATCH v8 26/28] x86_32/asm: change all ENTRY+END to SYM_CODE_*
Date: Thu, 8 Aug 2019 12:38:52 +0200 [thread overview]
Message-ID: <20190808103854.6192-27-jslaby@suse.cz> (raw)
In-Reply-To: <20190808103854.6192-1-jslaby@suse.cz>
Here, we change all assembly code which is marked using END (and not
ENDPROC). We switch all these to appropriate new markings SYM_CODE_START
and SYM_CODE_END.
And since we removed the last user of END on X86, make sure, that END is
not defined there.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
---
arch/x86/entry/entry_32.S | 104 ++++++++++++++++++------------------
arch/x86/kernel/ftrace_32.S | 8 +--
include/linux/linkage.h | 2 +
3 files changed, 58 insertions(+), 56 deletions(-)
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 64fe7aa50ad2..0ecc12fcfc05 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -709,7 +709,7 @@
* %eax: prev task
* %edx: next task
*/
-ENTRY(__switch_to_asm)
+SYM_CODE_START(__switch_to_asm)
/*
* Save callee-saved registers
* This must match the order in struct inactive_task_frame
@@ -748,7 +748,7 @@ ENTRY(__switch_to_asm)
popl %ebp
jmp __switch_to
-END(__switch_to_asm)
+SYM_CODE_END(__switch_to_asm)
/*
* The unwinder expects the last frame on the stack to always be at the same
@@ -774,7 +774,7 @@ ENDPROC(schedule_tail_wrapper)
* ebx: kernel thread func (NULL for user thread)
* edi: kernel thread arg
*/
-ENTRY(ret_from_fork)
+SYM_CODE_START(ret_from_fork)
call schedule_tail_wrapper
testl %ebx, %ebx
@@ -797,7 +797,7 @@ ENTRY(ret_from_fork)
*/
movl $0, PT_EAX(%esp)
jmp 2b
-END(ret_from_fork)
+SYM_CODE_END(ret_from_fork)
/*
* Return to user mode is not as complex as all this looks,
@@ -1161,7 +1161,7 @@ ENDPROC(entry_INT80_32)
* We pack 1 stub into every 8-byte block.
*/
.align 8
-ENTRY(irq_entries_start)
+SYM_CODE_START(irq_entries_start)
vector=FIRST_EXTERNAL_VECTOR
.rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
pushl $(~vector+0x80) /* Note: always in signed byte range */
@@ -1169,11 +1169,11 @@ ENTRY(irq_entries_start)
jmp common_interrupt
.align 8
.endr
-END(irq_entries_start)
+SYM_CODE_END(irq_entries_start)
#ifdef CONFIG_X86_LOCAL_APIC
.align 8
-ENTRY(spurious_entries_start)
+SYM_CODE_START(spurious_entries_start)
vector=FIRST_SYSTEM_VECTOR
.rept (NR_VECTORS - FIRST_SYSTEM_VECTOR)
pushl $(~vector+0x80) /* Note: always in signed byte range */
@@ -1181,7 +1181,7 @@ ENTRY(spurious_entries_start)
jmp common_spurious
.align 8
.endr
-END(spurious_entries_start)
+SYM_CODE_END(spurious_entries_start)
SYM_CODE_START_LOCAL(common_spurious)
ASM_CLAC
@@ -1230,14 +1230,14 @@ ENDPROC(name)
/* The include is where all of the SMP etc. interrupts come from */
#include <asm/entry_arch.h>
-ENTRY(coprocessor_error)
+SYM_CODE_START(coprocessor_error)
ASM_CLAC
pushl $0
pushl $do_coprocessor_error
jmp common_exception
-END(coprocessor_error)
+SYM_CODE_END(coprocessor_error)
-ENTRY(simd_coprocessor_error)
+SYM_CODE_START(simd_coprocessor_error)
ASM_CLAC
pushl $0
#ifdef CONFIG_X86_INVD_BUG
@@ -1249,96 +1249,96 @@ ENTRY(simd_coprocessor_error)
pushl $do_simd_coprocessor_error
#endif
jmp common_exception
-END(simd_coprocessor_error)
+SYM_CODE_END(simd_coprocessor_error)
-ENTRY(device_not_available)
+SYM_CODE_START(device_not_available)
ASM_CLAC
pushl $-1 # mark this as an int
pushl $do_device_not_available
jmp common_exception
-END(device_not_available)
+SYM_CODE_END(device_not_available)
#ifdef CONFIG_PARAVIRT
-ENTRY(native_iret)
+SYM_CODE_START(native_iret)
iret
_ASM_EXTABLE(native_iret, iret_exc)
-END(native_iret)
+SYM_CODE_END(native_iret)
#endif
-ENTRY(overflow)
+SYM_CODE_START(overflow)
ASM_CLAC
pushl $0
pushl $do_overflow
jmp common_exception
-END(overflow)
+SYM_CODE_END(overflow)
-ENTRY(bounds)
+SYM_CODE_START(bounds)
ASM_CLAC
pushl $0
pushl $do_bounds
jmp common_exception
-END(bounds)
+SYM_CODE_END(bounds)
-ENTRY(invalid_op)
+SYM_CODE_START(invalid_op)
ASM_CLAC
pushl $0
pushl $do_invalid_op
jmp common_exception
-END(invalid_op)
+SYM_CODE_END(invalid_op)
-ENTRY(coprocessor_segment_overrun)
+SYM_CODE_START(coprocessor_segment_overrun)
ASM_CLAC
pushl $0
pushl $do_coprocessor_segment_overrun
jmp common_exception
-END(coprocessor_segment_overrun)
+SYM_CODE_END(coprocessor_segment_overrun)
-ENTRY(invalid_TSS)
+SYM_CODE_START(invalid_TSS)
ASM_CLAC
pushl $do_invalid_TSS
jmp common_exception
-END(invalid_TSS)
+SYM_CODE_END(invalid_TSS)
-ENTRY(segment_not_present)
+SYM_CODE_START(segment_not_present)
ASM_CLAC
pushl $do_segment_not_present
jmp common_exception
-END(segment_not_present)
+SYM_CODE_END(segment_not_present)
-ENTRY(stack_segment)
+SYM_CODE_START(stack_segment)
ASM_CLAC
pushl $do_stack_segment
jmp common_exception
-END(stack_segment)
+SYM_CODE_END(stack_segment)
-ENTRY(alignment_check)
+SYM_CODE_START(alignment_check)
ASM_CLAC
pushl $do_alignment_check
jmp common_exception
-END(alignment_check)
+SYM_CODE_END(alignment_check)
-ENTRY(divide_error)
+SYM_CODE_START(divide_error)
ASM_CLAC
pushl $0 # no error code
pushl $do_divide_error
jmp common_exception
-END(divide_error)
+SYM_CODE_END(divide_error)
#ifdef CONFIG_X86_MCE
-ENTRY(machine_check)
+SYM_CODE_START(machine_check)
ASM_CLAC
pushl $0
pushl machine_check_vector
jmp common_exception
-END(machine_check)
+SYM_CODE_END(machine_check)
#endif
-ENTRY(spurious_interrupt_bug)
+SYM_CODE_START(spurious_interrupt_bug)
ASM_CLAC
pushl $0
pushl $do_spurious_interrupt_bug
jmp common_exception
-END(spurious_interrupt_bug)
+SYM_CODE_END(spurious_interrupt_bug)
#ifdef CONFIG_XEN_PV
ENTRY(xen_hypervisor_callback)
@@ -1442,11 +1442,11 @@ BUILD_INTERRUPT3(hv_stimer0_callback_vector, HYPERV_STIMER0_VECTOR,
#endif /* CONFIG_HYPERV */
-ENTRY(page_fault)
+SYM_CODE_START(page_fault)
ASM_CLAC
pushl $do_page_fault
jmp common_exception_read_cr2
-END(page_fault)
+SYM_CODE_END(page_fault)
SYM_CODE_START_LOCAL_NOALIGN(common_exception_read_cr2)
/* the function address is in %gs's slot on the stack */
@@ -1495,7 +1495,7 @@ SYM_CODE_START_LOCAL_NOALIGN(common_exception)
jmp ret_from_exception
SYM_CODE_END(common_exception)
-ENTRY(debug)
+SYM_CODE_START(debug)
/*
* Entry from sysenter is now handled in common_exception
*/
@@ -1503,7 +1503,7 @@ ENTRY(debug)
pushl $-1 # mark this as an int
pushl $do_debug
jmp common_exception
-END(debug)
+SYM_CODE_END(debug)
/*
* NMI is doubly nasty. It can happen on the first instruction of
@@ -1512,7 +1512,7 @@ END(debug)
* switched stacks. We handle both conditions by simply checking whether we
* interrupted kernel code running on the SYSENTER stack.
*/
-ENTRY(nmi)
+SYM_CODE_START(nmi)
ASM_CLAC
#ifdef CONFIG_X86_ESPFIX32
@@ -1577,9 +1577,9 @@ ENTRY(nmi)
lss 12+4(%esp), %esp # back to espfix stack
jmp .Lirq_return
#endif
-END(nmi)
+SYM_CODE_END(nmi)
-ENTRY(int3)
+SYM_CODE_START(int3)
ASM_CLAC
pushl $-1 # mark this as an int
@@ -1590,22 +1590,22 @@ ENTRY(int3)
movl %esp, %eax # pt_regs pointer
call do_int3
jmp ret_from_exception
-END(int3)
+SYM_CODE_END(int3)
-ENTRY(general_protection)
+SYM_CODE_START(general_protection)
pushl $do_general_protection
jmp common_exception
-END(general_protection)
+SYM_CODE_END(general_protection)
#ifdef CONFIG_KVM_GUEST
-ENTRY(async_page_fault)
+SYM_CODE_START(async_page_fault)
ASM_CLAC
pushl $do_async_page_fault
jmp common_exception_read_cr2
-END(async_page_fault)
+SYM_CODE_END(async_page_fault)
#endif
-ENTRY(rewind_stack_do_exit)
+SYM_CODE_START(rewind_stack_do_exit)
/* Prevent any naive code from trying to unwind to our caller. */
xorl %ebp, %ebp
@@ -1614,4 +1614,4 @@ ENTRY(rewind_stack_do_exit)
call do_exit
1: jmp 1b
-END(rewind_stack_do_exit)
+SYM_CODE_END(rewind_stack_do_exit)
diff --git a/arch/x86/kernel/ftrace_32.S b/arch/x86/kernel/ftrace_32.S
index a43ed4c0402d..b4f495bbd5a1 100644
--- a/arch/x86/kernel/ftrace_32.S
+++ b/arch/x86/kernel/ftrace_32.S
@@ -25,7 +25,7 @@ SYM_FUNC_START(function_hook)
ret
SYM_FUNC_END(function_hook)
-ENTRY(ftrace_caller)
+SYM_CODE_START(ftrace_caller)
#ifdef CONFIG_FRAME_POINTER
/*
@@ -87,7 +87,7 @@ ftrace_graph_call:
/* This is weak to keep gas from relaxing the jumps */
WEAK(ftrace_stub)
ret
-END(ftrace_caller)
+SYM_CODE_END(ftrace_caller)
SYM_CODE_START(ftrace_regs_caller)
/*
@@ -166,7 +166,7 @@ SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
SYM_CODE_END(ftrace_regs_caller)
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-ENTRY(ftrace_graph_caller)
+SYM_CODE_START(ftrace_graph_caller)
pushl %eax
pushl %ecx
pushl %edx
@@ -180,7 +180,7 @@ ENTRY(ftrace_graph_caller)
popl %ecx
popl %eax
ret
-END(ftrace_graph_caller)
+SYM_CODE_END(ftrace_graph_caller)
.globl return_to_handler
return_to_handler:
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 19f3d796ab5b..5ffcf72c8f87 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -129,11 +129,13 @@
SYM_FUNC_START_WEAK(name)
#endif
+#ifndef CONFIG_X86
#ifndef END
/* deprecated, use SYM_FUNC_END, SYM_DATA_END, or SYM_END */
#define END(name) \
.size name, .-name
#endif
+#endif /* CONFIG_X86 */
#ifndef CONFIG_X86_64
/* If symbol 'name' is treated as a subroutine (gets called, and returns)
--
2.22.0
next prev parent reply other threads:[~2019-08-08 10:39 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-08 10:38 [PATCH v8 00/28] New macros for assembler symbols Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 01/28] linkage: new " Jiri Slaby
2019-08-12 17:06 ` Borislav Petkov
2019-08-29 10:48 ` Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 02/28] x86/asm/suspend: use SYM_DATA for data Jiri Slaby
2019-08-13 16:40 ` Borislav Petkov
2019-08-08 10:38 ` [PATCH v8 03/28] x86/asm: annotate relocate_kernel Jiri Slaby
2019-08-15 8:37 ` Borislav Petkov
2019-08-08 10:38 ` [PATCH v8 04/28] x86/asm/entry: annotate THUNKs Jiri Slaby
2019-08-15 12:43 ` Borislav Petkov
2019-09-06 7:43 ` Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 05/28] x86/asm: annotate local pseudo-functions Jiri Slaby
2019-08-15 16:07 ` Borislav Petkov
2019-08-28 11:47 ` Asm & local labels for functions [was: [PATCH v8 05/28] x86/asm: annotate local pseudo-functions] Jiri Slaby
2019-08-28 12:24 ` Borislav Petkov
2019-08-08 10:38 ` [PATCH v8 06/28] x86/asm/crypto: annotate local functions Jiri Slaby
2019-08-17 9:17 ` Borislav Petkov
2019-09-05 10:59 ` Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 07/28] x86/boot/compressed: " Jiri Slaby
2019-08-19 14:44 ` Borislav Petkov
2019-08-08 10:38 ` [PATCH v8 08/28] x86/uaccess: annotate local function Jiri Slaby
2019-08-19 14:47 ` Borislav Petkov
2019-08-08 10:38 ` [PATCH v8 09/28] x86/asm: annotate aliases Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 10/28] x86/asm/entry: annotate interrupt symbols properly Jiri Slaby
2019-08-19 14:56 ` Borislav Petkov
2019-08-08 10:38 ` [PATCH v8 11/28] x86/asm/head: annotate data appropriatelly Jiri Slaby
2019-08-20 16:24 ` Borislav Petkov
2019-08-08 10:38 ` [PATCH v8 12/28] x86/boot/compressed: " Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 13/28] um: " Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 14/28] xen/pvh: " Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 15/28] x86/asm/purgatory: start using annotations Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 16/28] x86/asm: do not annotate functions by GLOBAL Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 17/28] x86/asm: use SYM_INNER_LABEL instead of GLOBAL Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 18/28] x86/asm/realmode: use SYM_DATA_* " Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 19/28] x86/asm: kill the last GLOBAL user and remove the macro Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 20/28] x86/asm: make some functions local Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 21/28] x86/asm/ftrace: mark function_hook as function Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 22/28] x86_64/asm: add ENDs to some functions and relabel with SYM_CODE_* Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 23/28] x86_64/asm: change all ENTRY+END to SYM_CODE_* Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 24/28] x86_64/asm: change all ENTRY+ENDPROC to SYM_FUNC_* Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 25/28] x86_32/asm: add ENDs to some functions and relabel with SYM_CODE_* Jiri Slaby
2019-08-08 10:38 ` Jiri Slaby [this message]
2019-08-08 10:38 ` [PATCH v8 27/28] x86_32/asm: change all ENTRY+ENDPROC to SYM_FUNC_* Jiri Slaby
2019-08-08 10:38 ` [PATCH v8 28/28] x86/asm: replace WEAK uses by SYM_INNER_LABEL_ALIGN Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190808103854.6192-27-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=bp@alien8.de \
--cc=hpa@zytor.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).