* [PATCH] ARM: dts: ux500: Use "arm,pl031" compatible for PL031
@ 2019-11-24 20:51 Stephan Gerhold
2019-11-27 14:00 ` Linus Walleij
0 siblings, 1 reply; 2+ messages in thread
From: Stephan Gerhold @ 2019-11-24 20:51 UTC (permalink / raw)
To: Linus Walleij
Cc: Rob Herring, Mark Rutland, linux-arm-kernel, devicetree,
linux-kernel, Stephan Gerhold
The Ux500 device tree uses "arm,rtc-pl031" as compatible for PL031.
All other boards in Linux describe it using "arm,pl031" instead.
This works because the compatible is not actually used in Linux:
AMBA devices get probed based on "arm,primecell" and their peripheral ID.
Nevertheless, some other projects (e.g. U-Boot) rely on the compatible
to probe the device with the correct driver. Those will look for
"arm,pl031" instead of "arm,rtc-pl031", preventing the RTC from being
probed.
Change it to "arm,pl031" to match all other boards.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
arch/arm/boot/dts/ste-dbx5x0.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 51ac65b78be0..0a5b88702b16 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -324,7 +324,7 @@
};
rtc@80154000 {
- compatible = "arm,rtc-pl031", "arm,primecell";
+ compatible = "arm,pl031", "arm,primecell";
reg = <0x80154000 0x1000>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
--
2.24.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: dts: ux500: Use "arm,pl031" compatible for PL031
2019-11-24 20:51 [PATCH] ARM: dts: ux500: Use "arm,pl031" compatible for PL031 Stephan Gerhold
@ 2019-11-27 14:00 ` Linus Walleij
0 siblings, 0 replies; 2+ messages in thread
From: Linus Walleij @ 2019-11-27 14:00 UTC (permalink / raw)
To: Stephan Gerhold
Cc: Rob Herring, Mark Rutland, Linux ARM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel
On Sun, Nov 24, 2019 at 9:52 PM Stephan Gerhold <stephan@gerhold.net> wrote:
> The Ux500 device tree uses "arm,rtc-pl031" as compatible for PL031.
> All other boards in Linux describe it using "arm,pl031" instead.
> This works because the compatible is not actually used in Linux:
> AMBA devices get probed based on "arm,primecell" and their peripheral ID.
>
> Nevertheless, some other projects (e.g. U-Boot) rely on the compatible
> to probe the device with the correct driver. Those will look for
> "arm,pl031" instead of "arm,rtc-pl031", preventing the RTC from being
> probed.
>
> Change it to "arm,pl031" to match all other boards.
>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Patch applied.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-11-27 14:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-24 20:51 [PATCH] ARM: dts: ux500: Use "arm,pl031" compatible for PL031 Stephan Gerhold
2019-11-27 14:00 ` Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).