Re: [PATCH v12 8/8] PCI/ACPI: Enable EDR support

From: Bjorn Helgaas <helgaas@kernel.org>
To: Kuppuswamy Sathyanarayanan  <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	ashok.raj@intel.com, "Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Len Brown <lenb@kernel.org>, Keith Busch <keith.busch@intel.com>,
	Huong Nguyen <huong.nguyen@dell.com>,
	Austin Bolen <Austin.Bolen@dell.com>
Subject: Re: [PATCH v12 8/8] PCI/ACPI: Enable EDR support
Date: Thu, 16 Jan 2020 16:58:22 -0600	[thread overview]
Message-ID: <20200116225822.GA219420@google.com> (raw)
In-Reply-To: <0723444f-6014-3e75-8116-f052f9a9cb24@linux.intel.com>

On Thu, Jan 16, 2020 at 02:24:10PM -0800, Kuppuswamy Sathyanarayanan wrote:
> 
> On 1/16/20 2:10 PM, Bjorn Helgaas wrote:
> > On Sun, Jan 12, 2020 at 02:44:02PM -0800, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
> > > From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> > > 
> > > As per PCI firmware specification r3.2 Downstream Port Containment
> > > Related Enhancements ECN, sec 4.5.1, OS must implement following steps
> > > to enable/use EDR feature.
> > > 
> > > 1. OS can use bit 7 of _OSC Control Field to negotiate control over
> > > Downstream Port Containment (DPC) configuration of PCIe port. After _OSC
> > > negotiation, firmware will Set this bit to grant OS control over PCIe
> > > DPC configuration and Clear it if this feature was requested and denied,
> > > or was not requested.
> > > 
> > > 2. Also, if OS supports EDR, it should expose its support to BIOS by
> > > setting bit 7 of _OSC Support Field. And if OS sets bit 7 of _OSC
> > > Control Field it must also expose support for EDR by setting bit 7 of
> > > _OSC Support Field.
> > > 
> > > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> > > Cc: Len Brown <lenb@kernel.org>
> > > Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> > > Acked-by: Keith Busch <keith.busch@intel.com>
> > > Tested-by: Huong Nguyen <huong.nguyen@dell.com>
> > > Tested-by: Austin Bolen <Austin.Bolen@dell.com>
> > > ---
> > >   drivers/acpi/pci_root.c         | 9 +++++++++
> > >   drivers/pci/pcie/portdrv_core.c | 7 +++++--
> > >   drivers/pci/probe.c             | 1 +
> > >   include/linux/acpi.h            | 6 ++++--
> > >   include/linux/pci.h             | 3 ++-
> > >   5 files changed, 21 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
> > > index d1e666ef3fcc..134e20474dfd 100644
> > > --- a/drivers/acpi/pci_root.c
> > > +++ b/drivers/acpi/pci_root.c
> > > @@ -131,6 +131,7 @@ static struct pci_osc_bit_struct pci_osc_support_bit[] = {
> > >   	{ OSC_PCI_CLOCK_PM_SUPPORT, "ClockPM" },
> > >   	{ OSC_PCI_SEGMENT_GROUPS_SUPPORT, "Segments" },
> > >   	{ OSC_PCI_MSI_SUPPORT, "MSI" },
> > > +	{ OSC_PCI_EDR_SUPPORT, "EDR" },
> > >   	{ OSC_PCI_HPX_TYPE_3_SUPPORT, "HPX-Type3" },
> > >   };
> > > @@ -141,6 +142,7 @@ static struct pci_osc_bit_struct pci_osc_control_bit[] = {
> > >   	{ OSC_PCI_EXPRESS_AER_CONTROL, "AER" },
> > >   	{ OSC_PCI_EXPRESS_CAPABILITY_CONTROL, "PCIeCapability" },
> > >   	{ OSC_PCI_EXPRESS_LTR_CONTROL, "LTR" },
> > > +	{ OSC_PCI_EXPRESS_DPC_CONTROL, "DPC" },
> > >   };
> > >   static void decode_osc_bits(struct acpi_pci_root *root, char *msg, u32 word,
> > > @@ -440,6 +442,8 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
> > >   		support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT;
> > >   	if (pci_msi_enabled())
> > >   		support |= OSC_PCI_MSI_SUPPORT;
> > > +	if (IS_ENABLED(CONFIG_PCIE_EDR))
> > > +		support |= OSC_PCI_EDR_SUPPORT;
> > >   	decode_osc_support(root, "OS supports", support);
> > >   	status = acpi_pci_osc_support(root, support);
> > > @@ -487,6 +491,9 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
> > >   			control |= OSC_PCI_EXPRESS_AER_CONTROL;
> > >   	}
> > > +	if (IS_ENABLED(CONFIG_PCIE_DPC))
> > > +		control |= OSC_PCI_EXPRESS_DPC_CONTROL;
> > The ECN [1] says:
> > 
> >    If this bit is set by the OS, this indicates that it supports both
> >    native OS control and firmware ownership models (i.e. Error
> >    Disconnect Recover notification) of Downstream Port Containment.
> > 
> > But if CONFIG_PCIE_DPC=y and CONFIG_PCIE_EDR is not set, we will set
> > OSC_PCI_EXPRESS_DPC_CONTROL even though we don't support EDR.  That
> > doesn't seem to match what the spec says.
> Agreed.
> > 
> > I think this needs to be something like:
> > 
> >    if (IS_ENABLED(CONFIG_PCIE_DPC) && IS_ENABLED(CONFIG_PCIE_EDR))
> >      control |= OSC_PCI_EXPRESS_DPC_CONTROL;
> Since CONFIG_PCIE_EDR has dependency on CONFIG_PCIE_DPC,
> I think we can just use IS_ENABLED(CONFIG_PCIE_EDR) here.
> 
> I will fix it and send an update. You want to me to send a new
> patch set of just an update to this patch ?

I'm still working through the rest of these, so I'd suggest making
this change in your local copy but waiting to send it for a few days.
Unless there's more substantial stuff to change, I can fix this
myself.

Bjorn