From: sathyanarayanan.kuppuswamy@linux.intel.com
To: bhelgaas@google.com
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
ashok.raj@intel.com, sathyanarayanan.kuppuswamy@linux.intel.com
Subject: [PATCH v12 0/8] Add Error Disconnect Recover (EDR) support
Date: Sun, 12 Jan 2020 14:43:54 -0800 [thread overview]
Message-ID: <cover.1578682741.git.sathyanarayanan.kuppuswamy@linux.intel.com> (raw)
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
This patchset adds support for following features:
1. Error Disconnect Recover (EDR) support.
2. _OSC based negotiation support for DPC.
You can find EDR spec in the following link.
https://members.pcisig.com/wg/PCI-SIG/document/12614
Changes since v11:
* Allowed error recovery to proceed after successful reset_link().
* Used correct ACPI handle for sending EDR status.
* Rebased on top of v5.5-rc5
Changes since v10:
* Added "edr_enabled" member to dpc priv structure, which is used to cache EDR
enabling status based on status of pcie_ports_dpc_native and FF mode.
* Changed type of _DSM argument from Integer to Package in acpi_enable_dpc_port()
function to fix ACPI related boot warnings.
* Rebased on top of v5.5-rc3
Changes since v9:
* Removed caching of pcie_aer_get_firmware_first() in dpc driver.
* Added proper spec reference in git log for patch 5 & 7.
* Added new function parameter "ff_check" to pci_cleanup_aer_uncorrect_error_status(),
pci_aer_clear_fatal_status() and pci_cleanup_aer_error_status_regs() functions.
* Rebased on top of v5.4-rc5
Changes since v8:
* Rebased on top of v5.4-rc1
Changes since v7:
* Updated DSM version number to match the spec.
Changes since v6:
* Modified the order of patches to enable EDR only after all necessary support is added in kernel.
* Addressed Bjorn comments.
Changes since v5:
* Addressed Keith's comments.
* Added additional check for FF mode in pci_aer_init().
* Updated commit history of "PCI/DPC: Add support for DPC recovery on NON_FATAL errors" patch.
Changes since v4:
* Rebased on top of v5.3-rc1
* Fixed lock/unlock issue in edr_handle_event().
* Merged "Update error status after reset_link()" patch into this patchset.
Changes since v3:
* Moved EDR related ACPI functions/definitions to pci-acpi.c
* Modified commit history in few patches to include spec reference.
* Added support to handle DPC triggered by NON_FATAL errors.
* Added edr_lock to protect PCI device receiving duplicate EDR notifications.
* Addressed Bjorn comments.
Changes since v2:
* Split EDR support patch into multiple patches.
* Addressed Bjorn comments.
Changes since v1:
* Rebased on top of v5.1-rc1
Kuppuswamy Sathyanarayanan (8):
PCI/ERR: Update error status after reset_link()
PCI/DPC: Allow dpc_probe() even if firmware first mode is enabled
PCI/DPC: Add dpc_process_error() wrapper function
PCI/DPC: Add Error Disconnect Recover (EDR) support
PCI/AER: Allow clearing Error Status Register in FF mode
PCI/DPC: Update comments related to DPC recovery on NON_FATAL errors
PCI/DPC: Clear AER registers in EDR mode
PCI/ACPI: Enable EDR support
Documentation/PCI/pcieaer-howto.rst | 2 +-
drivers/acpi/pci_root.c | 9 +
drivers/net/ethernet/intel/ice/ice_main.c | 2 +-
drivers/ntb/hw/idt/ntb_hw_idt.c | 2 +-
drivers/pci/pci-acpi.c | 98 ++++++++++
drivers/pci/pci.c | 2 +-
drivers/pci/pci.h | 2 +-
drivers/pci/pcie/Kconfig | 10 +
drivers/pci/pcie/aer.c | 16 +-
drivers/pci/pcie/dpc.c | 217 ++++++++++++++++++++--
drivers/pci/pcie/err.c | 10 +-
drivers/pci/pcie/portdrv_core.c | 7 +-
drivers/pci/probe.c | 1 +
drivers/scsi/lpfc/lpfc_attr.c | 2 +-
include/linux/acpi.h | 6 +-
include/linux/aer.h | 12 +-
include/linux/pci-acpi.h | 11 ++
include/linux/pci.h | 3 +-
18 files changed, 366 insertions(+), 46 deletions(-)
--
2.21.0
next reply other threads:[~2020-01-12 22:46 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-12 22:43 sathyanarayanan.kuppuswamy [this message]
2020-01-12 22:43 ` [PATCH v12 1/8] PCI/ERR: Update error status after reset_link() sathyanarayanan.kuppuswamy
2020-01-12 22:43 ` [PATCH v12 2/8] PCI/DPC: Allow dpc_probe() even if firmware first mode is enabled sathyanarayanan.kuppuswamy
2020-01-12 22:43 ` [PATCH v12 3/8] PCI/DPC: Add dpc_process_error() wrapper function sathyanarayanan.kuppuswamy
2020-01-12 22:43 ` [PATCH v12 4/8] PCI/DPC: Add Error Disconnect Recover (EDR) support sathyanarayanan.kuppuswamy
2020-01-17 22:56 ` Bjorn Helgaas
2020-01-12 22:43 ` [PATCH v12 5/8] PCI/AER: Allow clearing Error Status Register in FF mode sathyanarayanan.kuppuswamy
2020-01-17 22:56 ` Bjorn Helgaas
2020-01-12 22:44 ` [PATCH v12 6/8] PCI/DPC: Update comments related to DPC recovery on NON_FATAL errors sathyanarayanan.kuppuswamy
2020-01-12 22:44 ` [PATCH v12 7/8] PCI/DPC: Clear AER registers in EDR mode sathyanarayanan.kuppuswamy
2020-01-12 22:44 ` [PATCH v12 8/8] PCI/ACPI: Enable EDR support sathyanarayanan.kuppuswamy
2020-01-16 22:10 ` Bjorn Helgaas
2020-01-16 22:24 ` Kuppuswamy Sathyanarayanan
2020-01-16 22:58 ` Bjorn Helgaas
2020-01-16 23:01 ` Kuppuswamy Sathyanarayanan
2020-01-17 20:41 ` Bjorn Helgaas
2020-01-17 23:04 ` Kuppuswamy Sathyanarayanan
2020-01-14 19:48 ` [PATCH v12 0/8] Add Error Disconnect Recover (EDR) support Bjorn Helgaas
2020-01-18 0:18 ` Bjorn Helgaas
2020-01-18 1:10 ` Kuppuswamy Sathyanarayanan
2020-01-18 15:15 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1578682741.git.sathyanarayanan.kuppuswamy@linux.intel.com \
--to=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).