[PATCH] PCI: qcom: fix several error-hanlding problem.

[PATCH] PCI: qcom: fix several error-hanlding problem.

[wu000273]

From: Qiushi Wu <wu000273@umn.edu>

In function qcom_pcie_probe(), there are several error-handling problem.
1. pm_runtime_put() should be called after pm_runtime_get_sync() failed,
because refcount will be increased even pm_runtime_get_sync() returns 
an error.
2. pm_runtime_disable() are called twice, after the call of phy_init() and
dw_pcie_host_init() failed.
Fix these problem by pm_runtime_put() after the call of call 
pm_runtime_get_sync() failed. Also removing the redundant 
pm_runtime_disable().

Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 138e1a2d21cc..10393ab607bf 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1340,8 +1340,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
-		pm_runtime_disable(dev);
-		return ret;
+		goto err_pm_runtime_put;
 	}
 
 	pci->dev = dev;
@@ -1401,7 +1400,6 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 
 	ret = phy_init(pcie->phy);
 	if (ret) {
-		pm_runtime_disable(&pdev->dev);
 		goto err_pm_runtime_put;
 	}
 
@@ -1410,7 +1408,6 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	ret = dw_pcie_host_init(pp);
 	if (ret) {
 		dev_err(dev, "cannot initialize host\n");
-		pm_runtime_disable(&pdev->dev);
 		goto err_pm_runtime_put;
 	}
 
-- 
2.17.1