From: Rob Herring <robh@kernel.org>
To: Taniya Das <tdas@codeaurora.org>
Cc: "Stephen Boyd" <sboyd@kernel.org>,
"Michael Turquette " <mturquette@baylibre.com>,
"David Brown" <david.brown@linaro.org>,
"Rajendra Nayak" <rnayak@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
"Andy Gross" <agross@kernel.org>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v2 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180
Date: Thu, 28 May 2020 14:25:12 -0600 [thread overview]
Message-ID: <20200528202512.GA608913@bogus> (raw)
In-Reply-To: <1589707344-8871-3-git-send-email-tdas@codeaurora.org>
On Sun, May 17, 2020 at 02:52:22PM +0530, Taniya Das wrote:
> The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic
> properties that are needed in a device tree. Also add clock ids for GCC
> LPASS and LPASS Core clock IDs for LPASS client to request for the clocks.
>
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
> .../bindings/clock/qcom,sc7180-lpasscorecc.yaml | 101 +++++++++++++++++++++
> include/dt-bindings/clock/qcom,gcc-sc7180.h | 1 +
> .../dt-bindings/clock/qcom,lpasscorecc-sc7180.h | 29 ++++++
> 3 files changed, 131 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
> create mode 100644 include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
> new file mode 100644
> index 0000000..c025a0ae
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
> @@ -0,0 +1,101 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm LPASS Core Clock Controller Binding for SC7180
> +
> +maintainers:
> + - Taniya Das <tdas@codeaurora.org>
> +
> +description: |
> + Qualcomm LPASS core clock control module which supports the clocks and
> + power domains on SC7180.
> +
> + See also:
> + - dt-bindings/clock/qcom,lpasscorecc-sc7180.h
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,sc7180-lpasshm
> + - qcom,sc7180-lpasscorecc
> +
> + clocks:
> + items:
> + - description: gcc_lpass_sway clock from GCC
> +
> + clock-names:
> + items:
> + - const: gcc_lpass_sway
> +
> + power-domains:
> + items:
> + - description: LPASS CORE HM GSDCR
For single entry, 'maxItems: 1' is enough.
> +
> + '#clock-cells':
> + const: 1
> +
> + '#power-domain-cells':
> + const: 1
> +
> + reg:
> + minItems: 1
> + maxItems: 2
> + items:
> + - description: lpass audio cc register
> + - description: lpass core cc register
audio then core
> +
> + reg-names:
> + items:
> + - const: lpass_core_cc
> + - const: lpass_audio_cc
core then audio?
2 reg-names required, but 1 reg allowed?
> +
> +if:
> + properties:
> + compatible:
> + contains:
> + const: qcom,sc7180-lpasshm
> +then:
> + properties:
> + reg:
> + items:
> + - description: lpass hm core register
reg-names allowed in this case?
Ideally, this would have just 'maxItems: 1' to just disallow the 2nd
entry above.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - '#clock-cells'
> + - '#power-domain-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
> + clock-controller@63000000 {
> + compatible = "qcom,sc7180-lpasshm";
> + reg = <0 0x63000000 0 0x28>;
> + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>;
> + clock-names = "gcc_lpass_sway";
> + #clock-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +
> + - |
> + clock-controller@62d00000 {
> + compatible = "qcom,sc7180-lpasscorecc";
> + reg = <0 0x62d00000 0 0x50000>,
> + <0 0x62780000 0 0x30000>;
> + reg-names = "lpass_core_cc", "lpass_audio_cc";
> + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>;
> + clock-names = "gcc_lpass_sway";
> + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
> + #clock-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +...
> diff --git a/include/dt-bindings/clock/qcom,gcc-sc7180.h b/include/dt-bindings/clock/qcom,gcc-sc7180.h
> index 1258fd0..439476c 100644
> --- a/include/dt-bindings/clock/qcom,gcc-sc7180.h
> +++ b/include/dt-bindings/clock/qcom,gcc-sc7180.h
> @@ -137,6 +137,7 @@
> #define GCC_MSS_NAV_AXI_CLK 127
> #define GCC_MSS_Q6_MEMNOC_AXI_CLK 128
> #define GCC_MSS_SNOC_AXI_CLK 129
> +#define GCC_LPASS_CFG_NOC_SWAY_CLK 130
>
> /* GCC resets */
> #define GCC_QUSB2PHY_PRIM_BCR 0
> diff --git a/include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h b/include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
> new file mode 100644
> index 0000000..a55d01d
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
> @@ -0,0 +1,29 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7180_H
> +#define _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7180_H
> +
> +/* LPASS_CORE_CC clocks */
> +#define LPASS_LPAAUDIO_DIG_PLL 0
> +#define LPASS_LPAAUDIO_DIG_PLL_OUT_ODD 1
> +#define CORE_CLK_SRC 2
> +#define EXT_MCLK0_CLK_SRC 3
> +#define LPAIF_PRI_CLK_SRC 4
> +#define LPAIF_SEC_CLK_SRC 5
> +#define LPASS_AUDIO_CORE_CORE_CLK 6
> +#define LPASS_AUDIO_CORE_EXT_MCLK0_CLK 7
> +#define LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK 8
> +#define LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK 9
> +#define LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK 10
> +
> +/* LPASS Core power domains */
> +#define LPASS_CORE_HM_GDSCR 0
> +
> +/* LPASS Audio power domains */
> +#define LPASS_AUDIO_HM_GDSCR 0
> +#define LPASS_PDC_HM_GDSCR 1
> +
> +#endif
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the Linux Foundation.
>
next prev parent reply other threads:[~2020-05-28 20:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-17 9:22 [PATCH v2 0/4] clk: qcom: Support for Low Power Audio Clocks on SC7180 Taniya Das
2020-05-17 9:22 ` [PATCH v2 1/4] clk: qcom: gdsc: Add support to enable retention of GSDCR Taniya Das
2020-05-17 9:22 ` [PATCH v2 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180 Taniya Das
2020-05-27 3:11 ` Stephen Boyd
2020-06-10 17:07 ` Taniya Das
2020-05-28 20:25 ` Rob Herring [this message]
2020-06-10 17:09 ` Taniya Das
2020-05-17 9:22 ` [PATCH v2 3/4] clk: qcom: gcc: Add support for GCC LPASS clock for SC7180 Taniya Das
2020-05-17 9:22 ` [PATCH v2 4/4] clk: qcom: lpass: Add support for LPASS clock controller " Taniya Das
2020-05-27 3:10 ` Stephen Boyd
2020-06-10 17:11 ` Taniya Das
2020-06-11 1:06 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200528202512.GA608913@bogus \
--to=robh@kernel.org \
--cc=agross@kernel.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rnayak@codeaurora.org \
--cc=sboyd@kernel.org \
--cc=tdas@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).