* [PATCH v6 0/5] remoteproc: qcom: PIL info support @ 2020-05-27 5:48 Bjorn Andersson 2020-05-27 5:48 ` [PATCH v6 1/5] dt-bindings: remoteproc: Add Qualcomm PIL info binding Bjorn Andersson ` (4 more replies) 0 siblings, 5 replies; 9+ messages in thread From: Bjorn Andersson @ 2020-05-27 5:48 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Ohad Ben-Cohen Cc: Rob Herring, linux-arm-msm, linux-remoteproc, devicetree, linux-kernel Introduce support for filling out the relocation information in IMEM, to aid post mortem debug tools to locate the various remoteprocs. Bjorn Andersson (5): dt-bindings: remoteproc: Add Qualcomm PIL info binding remoteproc: qcom: Introduce helper to store pil info in IMEM remoteproc: qcom: Update PIL relocation info on load arm64: dts: qcom: qcs404: Add IMEM and PIL info region arm64: dts: qcom: sdm845: Add IMEM and PIL info region .../bindings/remoteproc/qcom,pil-info.yaml | 44 +++++++ arch/arm64/boot/dts/qcom/qcs404.dtsi | 15 +++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 15 +++ drivers/remoteproc/Kconfig | 8 ++ drivers/remoteproc/Makefile | 1 + drivers/remoteproc/qcom_pil_info.c | 124 ++++++++++++++++++ drivers/remoteproc/qcom_pil_info.h | 7 + drivers/remoteproc/qcom_q6v5_adsp.c | 16 ++- drivers/remoteproc/qcom_q6v5_mss.c | 3 + drivers/remoteproc/qcom_q6v5_pas.c | 15 ++- drivers/remoteproc/qcom_q6v5_wcss.c | 14 +- drivers/remoteproc/qcom_wcnss.c | 14 +- 12 files changed, 264 insertions(+), 12 deletions(-) create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml create mode 100644 drivers/remoteproc/qcom_pil_info.c create mode 100644 drivers/remoteproc/qcom_pil_info.h -- 2.26.2 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v6 1/5] dt-bindings: remoteproc: Add Qualcomm PIL info binding 2020-05-27 5:48 [PATCH v6 0/5] remoteproc: qcom: PIL info support Bjorn Andersson @ 2020-05-27 5:48 ` Bjorn Andersson 2020-05-27 5:48 ` [PATCH v6 2/5] remoteproc: qcom: Introduce helper to store pil info in IMEM Bjorn Andersson ` (3 subsequent siblings) 4 siblings, 0 replies; 9+ messages in thread From: Bjorn Andersson @ 2020-05-27 5:48 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Ohad Ben-Cohen Cc: Rob Herring, linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, Mathieu Poirier, Rob Herring, Stephen Boyd, Vinod Koul Add a devicetree binding for the Qualcomm peripheral image loader relocation information region found in the IMEM. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v5: - Picked up reviewed-bys .../bindings/remoteproc/qcom,pil-info.yaml | 44 +++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml new file mode 100644 index 000000000000..87c52316ddbd --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm peripheral image loader relocation info binding + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + The Qualcomm peripheral image loader relocation memory region, in IMEM, is + used for communicating remoteproc relocation information to post mortem + debugging tools. + +properties: + compatible: + const: qcom,pil-reloc-info + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + imem@146bf000 { + compatible = "syscon", "simple-mfd"; + reg = <0x146bf000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0x146bf000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; +... -- 2.26.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v6 2/5] remoteproc: qcom: Introduce helper to store pil info in IMEM 2020-05-27 5:48 [PATCH v6 0/5] remoteproc: qcom: PIL info support Bjorn Andersson 2020-05-27 5:48 ` [PATCH v6 1/5] dt-bindings: remoteproc: Add Qualcomm PIL info binding Bjorn Andersson @ 2020-05-27 5:48 ` Bjorn Andersson 2020-05-27 6:29 ` Stephen Boyd 2020-05-27 5:48 ` [PATCH v6 3/5] remoteproc: qcom: Update PIL relocation info on load Bjorn Andersson ` (2 subsequent siblings) 4 siblings, 1 reply; 9+ messages in thread From: Bjorn Andersson @ 2020-05-27 5:48 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Ohad Ben-Cohen Cc: Rob Herring, linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, Mathieu Poirier, Vinod Koul A region in IMEM is used to communicate load addresses of remoteproc to post mortem debug tools. Implement a helper function that can be used to store this information in order to enable these tools to process collected ramdumps. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v5: - Picked up reviewed-bys drivers/remoteproc/Kconfig | 3 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/qcom_pil_info.c | 124 +++++++++++++++++++++++++++++ drivers/remoteproc/qcom_pil_info.h | 7 ++ 4 files changed, 135 insertions(+) create mode 100644 drivers/remoteproc/qcom_pil_info.c create mode 100644 drivers/remoteproc/qcom_pil_info.h diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index c4d1731295eb..f4bd96d1a1a3 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -116,6 +116,9 @@ config KEYSTONE_REMOTEPROC It's safe to say N here if you're not interested in the Keystone DSPs or just want to use a bare minimum kernel. +config QCOM_PIL_INFO + tristate + config QCOM_RPROC_COMMON tristate diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index e8b886e511f0..fe398f82d550 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o +obj-$(CONFIG_QCOM_PIL_INFO) += qcom_pil_info.o obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o obj-$(CONFIG_QCOM_Q6V5_ADSP) += qcom_q6v5_adsp.o diff --git a/drivers/remoteproc/qcom_pil_info.c b/drivers/remoteproc/qcom_pil_info.c new file mode 100644 index 000000000000..0785c7cde2d3 --- /dev/null +++ b/drivers/remoteproc/qcom_pil_info.c @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2019-2020 Linaro Ltd. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_address.h> + +#define PIL_RELOC_NAME_LEN 8 + +struct pil_reloc_entry { + char name[PIL_RELOC_NAME_LEN]; + __le64 base; + __le32 size; +} __packed; + +struct pil_reloc { + struct device *dev; + void __iomem *base; + size_t num_entries; +}; + +static struct pil_reloc _reloc __read_mostly; +static DEFINE_MUTEX(reloc_mutex); + +static int qcom_pil_info_init(void) +{ + struct device_node *np; + struct resource imem; + void __iomem *base; + int ret; + + /* Already initialized? */ + if (_reloc.base) + return 0; + + np = of_find_compatible_node(NULL, NULL, "qcom,pil-reloc-info"); + if (!np) + return -ENOENT; + + ret = of_address_to_resource(np, 0, &imem); + of_node_put(np); + if (ret < 0) + return ret; + + base = ioremap(imem.start, resource_size(&imem)); + if (!base) { + pr_err("failed to map PIL relocation info region\n"); + return -ENOMEM; + } + + memset_io(base, 0, resource_size(&imem)); + + _reloc.base = base; + _reloc.num_entries = resource_size(&imem) / sizeof(struct pil_reloc_entry); + + return 0; +} + +/** + * qcom_pil_info_store() - store PIL information of image in IMEM + * @image: name of the image + * @base: base address of the loaded image + * @size: size of the loaded image + * + * Return: 0 on success, negative errno on failure + */ +int qcom_pil_info_store(const char *image, phys_addr_t base, size_t size) +{ + char buf[PIL_RELOC_NAME_LEN]; + void __iomem *entry; + int ret; + int i; + + mutex_lock(&reloc_mutex); + ret = qcom_pil_info_init(); + if (ret < 0) { + mutex_unlock(&reloc_mutex); + return ret; + } + + for (i = 0; i < _reloc.num_entries; i++) { + entry = _reloc.base + i * sizeof(struct pil_reloc_entry); + + memcpy_fromio(buf, entry, PIL_RELOC_NAME_LEN); + + /* + * An empty record means we didn't find it, given that the + * records are packed. + */ + if (!buf[0]) + goto found_unused; + + if (!strncmp(buf, image, PIL_RELOC_NAME_LEN)) + goto found_existing; + } + + pr_warn("insufficient PIL info slots\n"); + mutex_unlock(&reloc_mutex); + return -ENOMEM; + +found_unused: + memcpy_toio(entry, image, PIL_RELOC_NAME_LEN); +found_existing: + writel(base, entry + offsetof(struct pil_reloc_entry, base)); + writel(size, entry + offsetof(struct pil_reloc_entry, size)); + mutex_unlock(&reloc_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(qcom_pil_info_store); + +static void __exit pil_reloc_exit(void) +{ + mutex_lock(&reloc_mutex); + iounmap(_reloc.base); + _reloc.base = NULL; + mutex_unlock(&reloc_mutex); +} +module_exit(pil_reloc_exit); + +MODULE_DESCRIPTION("Qualcomm PIL relocation info"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/remoteproc/qcom_pil_info.h b/drivers/remoteproc/qcom_pil_info.h new file mode 100644 index 000000000000..1b89a63ba82f --- /dev/null +++ b/drivers/remoteproc/qcom_pil_info.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __QCOM_PIL_INFO_H__ +#define __QCOM_PIL_INFO_H__ + +int qcom_pil_info_store(const char *image, phys_addr_t base, size_t size); + +#endif -- 2.26.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v6 2/5] remoteproc: qcom: Introduce helper to store pil info in IMEM 2020-05-27 5:48 ` [PATCH v6 2/5] remoteproc: qcom: Introduce helper to store pil info in IMEM Bjorn Andersson @ 2020-05-27 6:29 ` Stephen Boyd 0 siblings, 0 replies; 9+ messages in thread From: Stephen Boyd @ 2020-05-27 6:29 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Ohad Ben-Cohen Cc: Rob Herring, linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, Mathieu Poirier, Vinod Koul Quoting Bjorn Andersson (2020-05-26 22:48:46) > diff --git a/drivers/remoteproc/qcom_pil_info.c b/drivers/remoteproc/qcom_pil_info.c > new file mode 100644 > index 000000000000..0785c7cde2d3 > --- /dev/null > +++ b/drivers/remoteproc/qcom_pil_info.c > @@ -0,0 +1,124 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2019-2020 Linaro Ltd. > + */ > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/of_address.h> > + > +#define PIL_RELOC_NAME_LEN 8 > + > +struct pil_reloc_entry { > + char name[PIL_RELOC_NAME_LEN]; > + __le64 base; > + __le32 size; > +} __packed; > + > +struct pil_reloc { > + struct device *dev; This isn't assigned. Remove it? > + void __iomem *base; > + size_t num_entries; > +}; > + > +static struct pil_reloc _reloc __read_mostly; > +static DEFINE_MUTEX(reloc_mutex); reloc_mutex is a little generic. Maybe pil_reloc_lock or qcom_pil_reloc_lock? > + > +static int qcom_pil_info_init(void) > +{ > + struct device_node *np; > + struct resource imem; > + void __iomem *base; > + int ret; > + > + /* Already initialized? */ > + if (_reloc.base) > + return 0; > + > + np = of_find_compatible_node(NULL, NULL, "qcom,pil-reloc-info"); > + if (!np) > + return -ENOENT; > + > + ret = of_address_to_resource(np, 0, &imem); > + of_node_put(np); > + if (ret < 0) > + return ret; > + > + base = ioremap(imem.start, resource_size(&imem)); > + if (!base) { > + pr_err("failed to map PIL relocation info region\n"); > + return -ENOMEM; > + } > + > + memset_io(base, 0, resource_size(&imem)); > + > + _reloc.base = base; > + _reloc.num_entries = resource_size(&imem) / sizeof(struct pil_reloc_entry); > + > + return 0; > +} > + > +/** > + * qcom_pil_info_store() - store PIL information of image in IMEM > + * @image: name of the image > + * @base: base address of the loaded image > + * @size: size of the loaded image > + * > + * Return: 0 on success, negative errno on failure > + */ > +int qcom_pil_info_store(const char *image, phys_addr_t base, size_t size) > +{ > + char buf[PIL_RELOC_NAME_LEN]; > + void __iomem *entry; > + int ret; > + int i; > + > + mutex_lock(&reloc_mutex); > + ret = qcom_pil_info_init(); > + if (ret < 0) { > + mutex_unlock(&reloc_mutex); > + return ret; > + } > + > + for (i = 0; i < _reloc.num_entries; i++) { > + entry = _reloc.base + i * sizeof(struct pil_reloc_entry); > + > + memcpy_fromio(buf, entry, PIL_RELOC_NAME_LEN); > + > + /* > + * An empty record means we didn't find it, given that the > + * records are packed. > + */ > + if (!buf[0]) > + goto found_unused; > + > + if (!strncmp(buf, image, PIL_RELOC_NAME_LEN)) > + goto found_existing; > + } > + > + pr_warn("insufficient PIL info slots\n"); > + mutex_unlock(&reloc_mutex); > + return -ENOMEM; > + > +found_unused: > + memcpy_toio(entry, image, PIL_RELOC_NAME_LEN); > +found_existing: > + writel(base, entry + offsetof(struct pil_reloc_entry, base)); > + writel(size, entry + offsetof(struct pil_reloc_entry, size)); It makes me nervous to see offsetof() used in the same line as writel() because who knows what the compiler does, even with __packed and stuff. I guess I tried and failed to convince you earlier to change this code to use fixed offsets instead of structs to describe the memory layout but that must have failed! > + mutex_unlock(&reloc_mutex); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(qcom_pil_info_store); > + > +static void __exit pil_reloc_exit(void) > +{ > + mutex_lock(&reloc_mutex); > + iounmap(_reloc.base); > + _reloc.base = NULL; > + mutex_unlock(&reloc_mutex); > +} > +module_exit(pil_reloc_exit); > + > +MODULE_DESCRIPTION("Qualcomm PIL relocation info"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/remoteproc/qcom_pil_info.h b/drivers/remoteproc/qcom_pil_info.h > new file mode 100644 > index 000000000000..1b89a63ba82f > --- /dev/null > +++ b/drivers/remoteproc/qcom_pil_info.h > @@ -0,0 +1,7 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#ifndef __QCOM_PIL_INFO_H__ > +#define __QCOM_PIL_INFO_H__ Probably need <linux/types.h> here for phys_addr_t definition to make this header self-contained. > + > +int qcom_pil_info_store(const char *image, phys_addr_t base, size_t size); > + > +#endif ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v6 3/5] remoteproc: qcom: Update PIL relocation info on load 2020-05-27 5:48 [PATCH v6 0/5] remoteproc: qcom: PIL info support Bjorn Andersson 2020-05-27 5:48 ` [PATCH v6 1/5] dt-bindings: remoteproc: Add Qualcomm PIL info binding Bjorn Andersson 2020-05-27 5:48 ` [PATCH v6 2/5] remoteproc: qcom: Introduce helper to store pil info in IMEM Bjorn Andersson @ 2020-05-27 5:48 ` Bjorn Andersson 2020-05-27 6:31 ` Stephen Boyd 2020-05-29 3:06 ` kbuild test robot 2020-05-27 5:48 ` [PATCH v6 4/5] arm64: dts: qcom: qcs404: Add IMEM and PIL info region Bjorn Andersson 2020-05-27 5:48 ` [PATCH v6 5/5] arm64: dts: qcom: sdm845: " Bjorn Andersson 4 siblings, 2 replies; 9+ messages in thread From: Bjorn Andersson @ 2020-05-27 5:48 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Ohad Ben-Cohen Cc: Rob Herring, linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, Vinod Koul Update the PIL relocation information in IMEM with information about where the firmware for various remoteprocs are loaded. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v5: - Added select QCOM_PIL_INFO to all relevant Kconfig options - Replaced mem_reloc with mem_phys, to get the start of the memory region, rather than the bottom address prior to relocation. - Include qcom_pil_info.h in qcom_q6v5_wcss.c drivers/remoteproc/Kconfig | 5 +++++ drivers/remoteproc/qcom_q6v5_adsp.c | 16 +++++++++++++--- drivers/remoteproc/qcom_q6v5_mss.c | 3 +++ drivers/remoteproc/qcom_q6v5_pas.c | 15 ++++++++++++--- drivers/remoteproc/qcom_q6v5_wcss.c | 14 +++++++++++--- drivers/remoteproc/qcom_wcnss.c | 14 +++++++++++--- 6 files changed, 55 insertions(+), 12 deletions(-) diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index f4bd96d1a1a3..3e8d5d1a2b9e 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -135,6 +135,7 @@ config QCOM_Q6V5_ADSP depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n depends on QCOM_SYSMON || QCOM_SYSMON=n select MFD_SYSCON + select QCOM_PIL_INFO select QCOM_MDT_LOADER select QCOM_Q6V5_COMMON select QCOM_RPROC_COMMON @@ -151,6 +152,7 @@ config QCOM_Q6V5_MSS depends on QCOM_SYSMON || QCOM_SYSMON=n select MFD_SYSCON select QCOM_MDT_LOADER + select QCOM_PIL_INFO select QCOM_Q6V5_COMMON select QCOM_Q6V5_IPA_NOTIFY select QCOM_RPROC_COMMON @@ -167,6 +169,7 @@ config QCOM_Q6V5_PAS depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n depends on QCOM_SYSMON || QCOM_SYSMON=n select MFD_SYSCON + select QCOM_PIL_INFO select QCOM_MDT_LOADER select QCOM_Q6V5_COMMON select QCOM_RPROC_COMMON @@ -185,6 +188,7 @@ config QCOM_Q6V5_WCSS depends on QCOM_SYSMON || QCOM_SYSMON=n select MFD_SYSCON select QCOM_MDT_LOADER + select QCOM_PIL_INFO select QCOM_Q6V5_COMMON select QCOM_RPROC_COMMON select QCOM_SCM @@ -218,6 +222,7 @@ config QCOM_WCNSS_PIL depends on QCOM_SMEM depends on QCOM_SYSMON || QCOM_SYSMON=n select QCOM_MDT_LOADER + select QCOM_PIL_INFO select QCOM_RPROC_COMMON select QCOM_SCM help diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c index d2a2574dcf35..efb2c1aa80a3 100644 --- a/drivers/remoteproc/qcom_q6v5_adsp.c +++ b/drivers/remoteproc/qcom_q6v5_adsp.c @@ -26,6 +26,7 @@ #include <linux/soc/qcom/smem_state.h> #include "qcom_common.h" +#include "qcom_pil_info.h" #include "qcom_q6v5.h" #include "remoteproc_internal.h" @@ -82,6 +83,7 @@ struct qcom_adsp { unsigned int halt_lpass; int crash_reason_smem; + const char *info_name; struct completion start_done; struct completion stop_done; @@ -164,10 +166,17 @@ static int qcom_adsp_shutdown(struct qcom_adsp *adsp) static int adsp_load(struct rproc *rproc, const struct firmware *fw) { struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv; + int ret; + + ret = qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, 0, + adsp->mem_region, adsp->mem_phys, + adsp->mem_size, &adsp->mem_reloc); + if (ret) + return ret; + + qcom_pil_info_store(adsp->info_name, adsp->mem_phys, adsp->mem_size); - return qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, 0, - adsp->mem_region, adsp->mem_phys, adsp->mem_size, - &adsp->mem_reloc); + return 0; } static int adsp_start(struct rproc *rproc) @@ -436,6 +445,7 @@ static int adsp_probe(struct platform_device *pdev) adsp = (struct qcom_adsp *)rproc->priv; adsp->dev = &pdev->dev; adsp->rproc = rproc; + adsp->info_name = desc->sysmon_name; platform_set_drvdata(pdev, adsp); ret = adsp_alloc_memory_region(adsp); diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c index feb70283b6a2..dd37e462ed61 100644 --- a/drivers/remoteproc/qcom_q6v5_mss.c +++ b/drivers/remoteproc/qcom_q6v5_mss.c @@ -29,6 +29,7 @@ #include "remoteproc_internal.h" #include "qcom_common.h" +#include "qcom_pil_info.h" #include "qcom_q6v5.h" #include <linux/qcom_scm.h> @@ -1189,6 +1190,8 @@ static int q6v5_mpss_load(struct q6v5 *qproc) else if (ret < 0) dev_err(qproc->dev, "MPSS authentication failed: %d\n", ret); + qcom_pil_info_store("modem", qproc->mpss_phys, qproc->mpss_size); + release_firmware: release_firmware(fw); out: diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c index 61791a03f648..3837f23995e0 100644 --- a/drivers/remoteproc/qcom_q6v5_pas.c +++ b/drivers/remoteproc/qcom_q6v5_pas.c @@ -25,6 +25,7 @@ #include <linux/soc/qcom/smem_state.h> #include "qcom_common.h" +#include "qcom_pil_info.h" #include "qcom_q6v5.h" #include "remoteproc_internal.h" @@ -64,6 +65,7 @@ struct qcom_adsp { int pas_id; int crash_reason_smem; bool has_aggre2_clk; + const char *info_name; struct completion start_done; struct completion stop_done; @@ -117,11 +119,17 @@ static void adsp_pds_disable(struct qcom_adsp *adsp, struct device **pds, static int adsp_load(struct rproc *rproc, const struct firmware *fw) { struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv; + int ret; - return qcom_mdt_load(adsp->dev, fw, rproc->firmware, adsp->pas_id, - adsp->mem_region, adsp->mem_phys, adsp->mem_size, - &adsp->mem_reloc); + ret = qcom_mdt_load(adsp->dev, fw, rproc->firmware, adsp->pas_id, + adsp->mem_region, adsp->mem_phys, adsp->mem_size, + &adsp->mem_reloc); + if (ret) + return ret; + qcom_pil_info_store(adsp->info_name, adsp->mem_phys, adsp->mem_size); + + return 0; } static int adsp_start(struct rproc *rproc) @@ -405,6 +413,7 @@ static int adsp_probe(struct platform_device *pdev) adsp->rproc = rproc; adsp->pas_id = desc->pas_id; adsp->has_aggre2_clk = desc->has_aggre2_clk; + adsp->info_name = desc->sysmon_name; platform_set_drvdata(pdev, adsp); device_wakeup_enable(adsp->dev); diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c index 88c76b9417fa..8846ef0b0f1a 100644 --- a/drivers/remoteproc/qcom_q6v5_wcss.c +++ b/drivers/remoteproc/qcom_q6v5_wcss.c @@ -14,6 +14,7 @@ #include <linux/reset.h> #include <linux/soc/qcom/mdt_loader.h> #include "qcom_common.h" +#include "qcom_pil_info.h" #include "qcom_q6v5.h" #define WCSS_CRASH_REASON 421 @@ -424,10 +425,17 @@ static void *q6v5_wcss_da_to_va(struct rproc *rproc, u64 da, size_t len) static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw) { struct q6v5_wcss *wcss = rproc->priv; + int ret; + + ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware, + 0, wcss->mem_region, wcss->mem_phys, + wcss->mem_size, &wcss->mem_reloc); + if (ret) + return ret; + + qcom_pil_info_store("wcnss", wcss->mem_phys, wcss->mem_size); - return qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware, - 0, wcss->mem_region, wcss->mem_phys, - wcss->mem_size, &wcss->mem_reloc); + return ret; } static const struct rproc_ops q6v5_wcss_ops = { diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c index 5d65e1a9329a..e2573f79a137 100644 --- a/drivers/remoteproc/qcom_wcnss.c +++ b/drivers/remoteproc/qcom_wcnss.c @@ -27,6 +27,7 @@ #include "qcom_common.h" #include "remoteproc_internal.h" +#include "qcom_pil_info.h" #include "qcom_wcnss.h" #define WCNSS_CRASH_REASON_SMEM 422 @@ -145,10 +146,17 @@ void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss, static int wcnss_load(struct rproc *rproc, const struct firmware *fw) { struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv; + int ret; + + ret = qcom_mdt_load(wcnss->dev, fw, rproc->firmware, WCNSS_PAS_ID, + wcnss->mem_region, wcnss->mem_phys, + wcnss->mem_size, &wcnss->mem_reloc); + if (ret) + return ret; + + qcom_pil_info_store("wcnss", wcnss->mem_phys, wcnss->mem_size); - return qcom_mdt_load(wcnss->dev, fw, rproc->firmware, WCNSS_PAS_ID, - wcnss->mem_region, wcnss->mem_phys, - wcnss->mem_size, &wcnss->mem_reloc); + return 0; } static void wcnss_indicate_nv_download(struct qcom_wcnss *wcnss) -- 2.26.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v6 3/5] remoteproc: qcom: Update PIL relocation info on load 2020-05-27 5:48 ` [PATCH v6 3/5] remoteproc: qcom: Update PIL relocation info on load Bjorn Andersson @ 2020-05-27 6:31 ` Stephen Boyd 2020-05-29 3:06 ` kbuild test robot 1 sibling, 0 replies; 9+ messages in thread From: Stephen Boyd @ 2020-05-27 6:31 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Ohad Ben-Cohen Cc: Rob Herring, linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, Vinod Koul Quoting Bjorn Andersson (2020-05-26 22:48:47) > Update the PIL relocation information in IMEM with information about > where the firmware for various remoteprocs are loaded. > > Reviewed-by: Vinod Koul <vkoul@kernel.org> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- Reviewed-by: Stephen Boyd <swboyd@chromium.org> ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v6 3/5] remoteproc: qcom: Update PIL relocation info on load 2020-05-27 5:48 ` [PATCH v6 3/5] remoteproc: qcom: Update PIL relocation info on load Bjorn Andersson 2020-05-27 6:31 ` Stephen Boyd @ 2020-05-29 3:06 ` kbuild test robot 1 sibling, 0 replies; 9+ messages in thread From: kbuild test robot @ 2020-05-29 3:06 UTC (permalink / raw) To: Bjorn Andersson, Andy Gross, Ohad Ben-Cohen Cc: kbuild-all, Rob Herring, linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, Vinod Koul [-- Attachment #1: Type: text/plain, Size: 5788 bytes --] Hi Bjorn, I love your patch! Perhaps something to improve: [auto build test WARNING on next-20200526] [also build test WARNING on v5.7-rc7] [cannot apply to robh/for-next linus/master agross-msm/qcom/for-next remoteproc/for-next rpmsg/for-next hwspinlock/for-next v5.7-rc7 v5.7-rc6 v5.7-rc5] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982] url: https://github.com/0day-ci/linux/commits/Bjorn-Andersson/remoteproc-qcom-PIL-info-support/20200527-135911 base: b0523c7b1c9d0edcd6c0fe6d2cb558a9ad5c60a8 config: arm64-allyesconfig (attached as .config) compiler: aarch64-linux-gcc (GCC) 9.3.0 reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm64 If you fix the issue, kindly add following tag as appropriate Reported-by: kbuild test robot <lkp@intel.com> All warnings (new ones prefixed by >>, old ones prefixed by <<): >> drivers/remoteproc/qcom_pil_info.c:69:5: warning: no previous prototype for 'qcom_pil_info_store' [-Wmissing-prototypes] 69 | int qcom_pil_info_store(const char *image, phys_addr_t base, size_t size) | ^~~~~~~~~~~~~~~~~~~ vim +/qcom_pil_info_store +69 drivers/remoteproc/qcom_pil_info.c 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 60 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 61 /** 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 62 * qcom_pil_info_store() - store PIL information of image in IMEM 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 63 * @image: name of the image 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 64 * @base: base address of the loaded image 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 65 * @size: size of the loaded image 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 66 * 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 67 * Return: 0 on success, negative errno on failure 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 68 */ 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 @69 int qcom_pil_info_store(const char *image, phys_addr_t base, size_t size) 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 70 { 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 71 char buf[PIL_RELOC_NAME_LEN]; 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 72 void __iomem *entry; 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 73 int ret; 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 74 int i; 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 75 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 76 mutex_lock(&reloc_mutex); 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 77 ret = qcom_pil_info_init(); 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 78 if (ret < 0) { 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 79 mutex_unlock(&reloc_mutex); 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 80 return ret; 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 81 } 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 82 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 83 for (i = 0; i < _reloc.num_entries; i++) { 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 84 entry = _reloc.base + i * sizeof(struct pil_reloc_entry); 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 85 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 86 memcpy_fromio(buf, entry, PIL_RELOC_NAME_LEN); 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 87 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 88 /* 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 89 * An empty record means we didn't find it, given that the 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 90 * records are packed. 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 91 */ 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 92 if (!buf[0]) 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 93 goto found_unused; 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 94 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 95 if (!strncmp(buf, image, PIL_RELOC_NAME_LEN)) 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 96 goto found_existing; 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 97 } 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 98 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 99 pr_warn("insufficient PIL info slots\n"); 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 100 mutex_unlock(&reloc_mutex); 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 101 return -ENOMEM; 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 102 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 103 found_unused: 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 104 memcpy_toio(entry, image, PIL_RELOC_NAME_LEN); 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 105 found_existing: 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 106 writel(base, entry + offsetof(struct pil_reloc_entry, base)); 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 107 writel(size, entry + offsetof(struct pil_reloc_entry, size)); 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 108 mutex_unlock(&reloc_mutex); 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 109 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 110 return 0; 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 111 } 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 112 EXPORT_SYMBOL_GPL(qcom_pil_info_store); 41d96cc2fee2c1 Bjorn Andersson 2020-05-26 113 :::::: The code at line 69 was first introduced by commit :::::: 41d96cc2fee2c1143685357ad2929be0a7cf5d0f remoteproc: qcom: Introduce helper to store pil info in IMEM :::::: TO: Bjorn Andersson <bjorn.andersson@linaro.org> :::::: CC: 0day robot <lkp@intel.com> --- 0-DAY CI Kernel Test Service, Intel Corporation https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org [-- Attachment #2: .config.gz --] [-- Type: application/gzip, Size: 72793 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v6 4/5] arm64: dts: qcom: qcs404: Add IMEM and PIL info region 2020-05-27 5:48 [PATCH v6 0/5] remoteproc: qcom: PIL info support Bjorn Andersson ` (2 preceding siblings ...) 2020-05-27 5:48 ` [PATCH v6 3/5] remoteproc: qcom: Update PIL relocation info on load Bjorn Andersson @ 2020-05-27 5:48 ` Bjorn Andersson 2020-05-27 5:48 ` [PATCH v6 5/5] arm64: dts: qcom: sdm845: " Bjorn Andersson 4 siblings, 0 replies; 9+ messages in thread From: Bjorn Andersson @ 2020-05-27 5:48 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Ohad Ben-Cohen Cc: Rob Herring, linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, Stephen Boyd, Vinod Koul Add a simple-mfd representing IMEM on QCS404 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteprocs. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v5: - Picked up reviewed-bys arch/arm64/boot/dts/qcom/qcs404.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index c685a1664810..b654b802e95c 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1097,6 +1097,21 @@ blsp2_spi0: spi@7af5000 { status = "disabled"; }; + imem@8600000 { + compatible = "simple-mfd"; + reg = <0x08600000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0x08600000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; -- 2.26.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v6 5/5] arm64: dts: qcom: sdm845: Add IMEM and PIL info region 2020-05-27 5:48 [PATCH v6 0/5] remoteproc: qcom: PIL info support Bjorn Andersson ` (3 preceding siblings ...) 2020-05-27 5:48 ` [PATCH v6 4/5] arm64: dts: qcom: qcs404: Add IMEM and PIL info region Bjorn Andersson @ 2020-05-27 5:48 ` Bjorn Andersson 4 siblings, 0 replies; 9+ messages in thread From: Bjorn Andersson @ 2020-05-27 5:48 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Ohad Ben-Cohen Cc: Rob Herring, linux-arm-msm, linux-remoteproc, devicetree, linux-kernel, Stephen Boyd, Vinod Koul Add a simple-mfd representing IMEM on SDM845 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteprocs. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v5: - Picked up reviewed-bys arch/arm64/boot/dts/qcom/sdm845.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 8eb5a31346d2..fee50d979dc3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3724,6 +3724,21 @@ spmi_bus: spmi@c440000 { cell-index = <0>; }; + imem@146bf000 { + compatible = "simple-mfd"; + reg = <0 0x146bf000 0 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146bf000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x80000>; -- 2.26.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-05-29 3:24 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-05-27 5:48 [PATCH v6 0/5] remoteproc: qcom: PIL info support Bjorn Andersson 2020-05-27 5:48 ` [PATCH v6 1/5] dt-bindings: remoteproc: Add Qualcomm PIL info binding Bjorn Andersson 2020-05-27 5:48 ` [PATCH v6 2/5] remoteproc: qcom: Introduce helper to store pil info in IMEM Bjorn Andersson 2020-05-27 6:29 ` Stephen Boyd 2020-05-27 5:48 ` [PATCH v6 3/5] remoteproc: qcom: Update PIL relocation info on load Bjorn Andersson 2020-05-27 6:31 ` Stephen Boyd 2020-05-29 3:06 ` kbuild test robot 2020-05-27 5:48 ` [PATCH v6 4/5] arm64: dts: qcom: qcs404: Add IMEM and PIL info region Bjorn Andersson 2020-05-27 5:48 ` [PATCH v6 5/5] arm64: dts: qcom: sdm845: " Bjorn Andersson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).