linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: "Thierry Reding" <thierry.reding@gmail.com>,
	"Jonathan Hunter" <jonathanh@nvidia.com>,
	"Laxman Dewangan" <ldewangan@nvidia.com>,
	"Wolfram Sang" <wsa@the-dreams.de>,
	"Michał Mirosław" <mirq-linux@rere.qmqm.pl>,
	"Andy Shevchenko" <andy.shevchenko@gmail.com>
Cc: linux-i2c@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 10/31] i2c: tegra: Use clk-bulk helpers
Date: Sat,  5 Sep 2020 23:41:30 +0300	[thread overview]
Message-ID: <20200905204151.25343-11-digetx@gmail.com> (raw)
In-Reply-To: <20200905204151.25343-1-digetx@gmail.com>

Use clk-bulk helpers and factor out clocks initialization into separate
function in order to make code cleaner.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/i2c/busses/i2c-tegra.c | 184 ++++++++++++---------------------
 1 file changed, 65 insertions(+), 119 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index f1c4334faed3..8e4e72dec6ea 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -165,9 +165,6 @@ enum msg_end_type {
  * @has_continue_xfer_support: Continue transfer supports.
  * @has_per_pkt_xfer_complete_irq: Has enable/disable capability for transfer
  *		complete interrupt per packet basis.
- * @has_single_clk_source: The I2C controller has single clock source. Tegra30
- *		and earlier SoCs have two clock sources i.e. div-clk and
- *		fast-clk.
  * @has_config_load_reg: Has the config load register to load the new
  *		configuration.
  * @clk_divisor_hs_mode: Clock divisor in HS mode.
@@ -208,7 +205,6 @@ enum msg_end_type {
 struct tegra_i2c_hw_feature {
 	bool has_continue_xfer_support;
 	bool has_per_pkt_xfer_complete_irq;
-	bool has_single_clk_source;
 	bool has_config_load_reg;
 	int clk_divisor_hs_mode;
 	int clk_divisor_std_mode;
@@ -236,7 +232,8 @@ struct tegra_i2c_hw_feature {
  * @hw: Tegra I2C HW feature
  * @adapter: core I2C layer adapter information
  * @div_clk: clock reference for div clock of I2C controller
- * @fast_clk: clock reference for fast clock of I2C controller
+ * @clocks: array of I2C controller clocks
+ * @nclocks: number of clocks in the array
  * @rst: reset control for the I2C controller
  * @base: ioremapped registers cookie
  * @base_phys: physical base address of the I2C controller
@@ -265,8 +262,8 @@ struct tegra_i2c_dev {
 	const struct tegra_i2c_hw_feature *hw;
 	struct i2c_adapter adapter;
 	struct clk *div_clk;
-	struct clk *fast_clk;
-	struct clk *slow_clk;
+	struct clk_bulk_data *clocks;
+	unsigned int nclocks;
 	struct reset_control *rst;
 	void __iomem *base;
 	phys_addr_t base_phys;
@@ -662,25 +659,9 @@ static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
 	if (ret)
 		return ret;
 
-	ret = clk_enable(i2c_dev->fast_clk);
-	if (ret < 0) {
-		dev_err(i2c_dev->dev,
-			"Enabling fast clk failed, err %d\n", ret);
+	ret = clk_bulk_enable(i2c_dev->nclocks, i2c_dev->clocks);
+	if (ret)
 		return ret;
-	}
-
-	ret = clk_enable(i2c_dev->slow_clk);
-	if (ret < 0) {
-		dev_err(dev, "failed to enable slow clock: %d\n", ret);
-		goto disable_fast_clk;
-	}
-
-	ret = clk_enable(i2c_dev->div_clk);
-	if (ret < 0) {
-		dev_err(i2c_dev->dev,
-			"Enabling div clk failed, err %d\n", ret);
-		goto disable_slow_clk;
-	}
 
 	/*
 	 * VI I2C device is attached to VE power domain which goes through
@@ -691,17 +672,14 @@ static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
 	if (i2c_dev->is_vi) {
 		ret = tegra_i2c_init(i2c_dev);
 		if (ret)
-			goto disable_div_clk;
+			goto disable_clocks;
 	}
 
 	return 0;
 
-disable_div_clk:
-	clk_disable(i2c_dev->div_clk);
-disable_slow_clk:
-	clk_disable(i2c_dev->slow_clk);
-disable_fast_clk:
-	clk_disable(i2c_dev->fast_clk);
+disable_clocks:
+	clk_bulk_disable(i2c_dev->nclocks, i2c_dev->clocks);
+
 	return ret;
 }
 
@@ -709,9 +687,7 @@ static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev)
 {
 	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 
-	clk_disable(i2c_dev->div_clk);
-	clk_disable(i2c_dev->slow_clk);
-	clk_disable(i2c_dev->fast_clk);
+	clk_bulk_disable(i2c_dev->nclocks, i2c_dev->clocks);
 
 	return pinctrl_pm_select_idle_state(i2c_dev->dev);
 }
@@ -1467,7 +1443,6 @@ static struct i2c_bus_recovery_info tegra_i2c_recovery_info = {
 static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
 	.has_continue_xfer_support = false,
 	.has_per_pkt_xfer_complete_irq = false,
-	.has_single_clk_source = false,
 	.clk_divisor_hs_mode = 3,
 	.clk_divisor_std_mode = 0,
 	.clk_divisor_fast_mode = 0,
@@ -1492,7 +1467,6 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
 static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
 	.has_continue_xfer_support = true,
 	.has_per_pkt_xfer_complete_irq = false,
-	.has_single_clk_source = false,
 	.clk_divisor_hs_mode = 3,
 	.clk_divisor_std_mode = 0,
 	.clk_divisor_fast_mode = 0,
@@ -1517,7 +1491,6 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
 static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
 	.has_continue_xfer_support = true,
 	.has_per_pkt_xfer_complete_irq = true,
-	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
 	.clk_divisor_std_mode = 0x19,
 	.clk_divisor_fast_mode = 0x19,
@@ -1542,7 +1515,6 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
 static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
 	.has_continue_xfer_support = true,
 	.has_per_pkt_xfer_complete_irq = true,
-	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
 	.clk_divisor_std_mode = 0x19,
 	.clk_divisor_fast_mode = 0x19,
@@ -1567,7 +1539,6 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
 static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
 	.has_continue_xfer_support = true,
 	.has_per_pkt_xfer_complete_irq = true,
-	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
 	.clk_divisor_std_mode = 0x19,
 	.clk_divisor_fast_mode = 0x19,
@@ -1592,7 +1563,6 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
 static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
 	.has_continue_xfer_support = true,
 	.has_per_pkt_xfer_complete_irq = true,
-	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
 	.clk_divisor_std_mode = 0x16,
 	.clk_divisor_fast_mode = 0x19,
@@ -1617,7 +1587,6 @@ static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
 static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
 	.has_continue_xfer_support = true,
 	.has_per_pkt_xfer_complete_irq = true,
-	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
 	.clk_divisor_std_mode = 0x4f,
 	.clk_divisor_fast_mode = 0x3c,
@@ -1654,13 +1623,58 @@ static const struct of_device_id tegra_i2c_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
 
+static int tegra_i2c_init_clocks(struct tegra_i2c_dev *i2c_dev)
+{
+	unsigned int i;
+	int err;
+
+	err = devm_clk_bulk_get_all(i2c_dev->dev, &i2c_dev->clocks);
+	if (err < 0)
+		return err;
+
+	i2c_dev->nclocks = err;
+
+	err = clk_bulk_prepare(i2c_dev->nclocks, i2c_dev->clocks);
+	if (err)
+		return err;
+
+	for (i = 0; i < i2c_dev->nclocks; i++) {
+		if (!strcmp(i2c_dev->clocks[i].id, "div-clk")) {
+			i2c_dev->div_clk = i2c_dev->clocks[i].clk;
+			break;
+		}
+	}
+
+	if (!i2c_dev->is_multimaster_mode)
+		return 0;
+
+	err = clk_enable(i2c_dev->div_clk);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to enable div-clk: %d\n", err);
+		goto unprepare_clocks;
+	}
+
+	return 0;
+
+unprepare_clocks:
+	clk_bulk_unprepare(i2c_dev->nclocks, i2c_dev->clocks);
+
+	return err;
+}
+
+static void tegra_i2c_release_clocks(struct tegra_i2c_dev *i2c_dev)
+{
+	if (i2c_dev->is_multimaster_mode)
+		clk_disable(i2c_dev->div_clk);
+
+	clk_bulk_unprepare(i2c_dev->nclocks, i2c_dev->clocks);
+}
+
 static int tegra_i2c_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct tegra_i2c_dev *i2c_dev;
 	struct resource *res;
-	struct clk *div_clk;
-	struct clk *fast_clk;
 	void __iomem *base;
 	phys_addr_t base_phys;
 	int irq;
@@ -1676,21 +1690,12 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	div_clk = devm_clk_get(&pdev->dev, "div-clk");
-	if (IS_ERR(div_clk)) {
-		if (PTR_ERR(div_clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "missing controller clock\n");
-
-		return PTR_ERR(div_clk);
-	}
-
 	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
 	if (!i2c_dev)
 		return -ENOMEM;
 
 	i2c_dev->base = base;
 	i2c_dev->base_phys = base_phys;
-	i2c_dev->div_clk = div_clk;
 	i2c_dev->adapter.algo = &tegra_i2c_algo;
 	i2c_dev->adapter.retries = 1;
 	i2c_dev->adapter.timeout = 6 * HZ;
@@ -1706,6 +1711,10 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 
 	tegra_i2c_parse_dt(i2c_dev);
 
+	ret = tegra_i2c_init_clocks(i2c_dev);
+	if (ret)
+		return ret;
+
 	i2c_dev->hw = of_device_get_match_data(&pdev->dev);
 	i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
 						  "nvidia,tegra20-i2c-dvc");
@@ -1717,46 +1726,8 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	init_completion(&i2c_dev->msg_complete);
 	init_completion(&i2c_dev->dma_complete);
 
-	if (!i2c_dev->hw->has_single_clk_source) {
-		fast_clk = devm_clk_get(&pdev->dev, "fast-clk");
-		if (IS_ERR(fast_clk)) {
-			dev_err(&pdev->dev, "missing fast clock\n");
-			return PTR_ERR(fast_clk);
-		}
-		i2c_dev->fast_clk = fast_clk;
-	}
-
-	if (i2c_dev->is_vi) {
-		i2c_dev->slow_clk = devm_clk_get(dev, "slow");
-		if (IS_ERR(i2c_dev->slow_clk)) {
-			if (PTR_ERR(i2c_dev->slow_clk) != -EPROBE_DEFER)
-				dev_err(dev, "failed to get slow clock: %ld\n",
-					PTR_ERR(i2c_dev->slow_clk));
-
-			return PTR_ERR(i2c_dev->slow_clk);
-		}
-	}
-
 	platform_set_drvdata(pdev, i2c_dev);
 
-	ret = clk_prepare(i2c_dev->fast_clk);
-	if (ret < 0) {
-		dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
-		return ret;
-	}
-
-	ret = clk_prepare(i2c_dev->slow_clk);
-	if (ret < 0) {
-		dev_err(dev, "failed to prepare slow clock: %d\n", ret);
-		goto unprepare_fast_clk;
-	}
-
-	ret = clk_prepare(i2c_dev->div_clk);
-	if (ret < 0) {
-		dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
-		goto unprepare_slow_clk;
-	}
-
 	/*
 	 * VI I2C is in VE power domain which is not always on and not
 	 * an IRQ safe. So, IRQ safe device can't be attached to a non-IRQ
@@ -1773,21 +1744,12 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 		goto disable_rpm;
 	}
 
-	if (i2c_dev->is_multimaster_mode) {
-		ret = clk_enable(i2c_dev->div_clk);
-		if (ret < 0) {
-			dev_err(i2c_dev->dev, "div_clk enable failed %d\n",
-				ret);
-			goto put_rpm;
-		}
-	}
-
 	if (i2c_dev->hw->supports_bus_clear)
 		i2c_dev->adapter.bus_recovery_info = &tegra_i2c_recovery_info;
 
 	ret = tegra_i2c_init_dma(i2c_dev);
 	if (ret < 0)
-		goto disable_div_clk;
+		goto put_rpm;
 
 	ret = tegra_i2c_init(i2c_dev);
 	if (ret) {
@@ -1822,22 +1784,12 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 release_dma:
 	tegra_i2c_release_dma(i2c_dev);
 
-disable_div_clk:
-	if (i2c_dev->is_multimaster_mode)
-		clk_disable(i2c_dev->div_clk);
-
 put_rpm:
 	pm_runtime_put_sync(&pdev->dev);
 
 disable_rpm:
 	pm_runtime_disable(&pdev->dev);
-	clk_unprepare(i2c_dev->div_clk);
-
-unprepare_slow_clk:
-	clk_unprepare(i2c_dev->slow_clk);
-
-unprepare_fast_clk:
-	clk_unprepare(i2c_dev->fast_clk);
+	tegra_i2c_release_clocks(i2c_dev);
 
 	return ret;
 }
@@ -1848,16 +1800,10 @@ static int tegra_i2c_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&i2c_dev->adapter);
 
-	if (i2c_dev->is_multimaster_mode)
-		clk_disable(i2c_dev->div_clk);
-
 	pm_runtime_disable(&pdev->dev);
 
-	clk_unprepare(i2c_dev->div_clk);
-	clk_unprepare(i2c_dev->slow_clk);
-	clk_unprepare(i2c_dev->fast_clk);
-
 	tegra_i2c_release_dma(i2c_dev);
+	tegra_i2c_release_clocks(i2c_dev);
 	return 0;
 }
 
-- 
2.27.0


  parent reply	other threads:[~2020-09-05 20:46 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-05 20:41 [PATCH v4 00/31] Improvements for Tegra I2C driver Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 01/31] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 02/31] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 03/31] i2c: tegra: Initialization div-clk rate unconditionally Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 04/31] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 05/31] i2c: tegra: Runtime PM always available on Tegra Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 06/31] i2c: tegra: Remove error message used for devm_request_irq() failure Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 07/31] i2c: tegra: Use reset_control_reset() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 08/31] i2c: tegra: Use devm_platform_get_and_ioremap_resource() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 09/31] i2c: tegra: Use platform_get_irq() Dmitry Osipenko
2020-09-05 20:41 ` Dmitry Osipenko [this message]
2020-09-05 21:56   ` [PATCH v4 10/31] i2c: tegra: Use clk-bulk helpers Michał Mirosław
2020-09-05 22:08     ` Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 11/31] i2c: tegra: Factor out runtime PM and hardware initialization Dmitry Osipenko
2020-09-05 22:10   ` Michał Mirosław
2020-09-05 22:24     ` Dmitry Osipenko
2020-09-05 22:51       ` Michał Mirosław
2020-09-05 23:10         ` Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 12/31] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 13/31] i2c: tegra: Clean up probe function Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 14/31] i2c: tegra: Remove likely/unlikely from the code Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 15/31] i2c: tegra: Remove bogus barrier() Dmitry Osipenko
2020-09-05 23:35   ` Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 16/31] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg() Dmitry Osipenko
2020-09-05 22:23   ` Michał Mirosław
2020-09-05 22:36     ` Dmitry Osipenko
2020-09-05 22:49       ` Michał Mirosław
2020-09-05 22:54         ` Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 17/31] i2c: tegra: Improve formatting of function variables Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 18/31] i2c: tegra: Improve coding style of tegra_i2c_wait_for_config_load() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 19/31] i2c: tegra: Rename wait/poll functions Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 20/31] i2c: tegra: Rename variable in tegra_i2c_issue_bus_clear() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 21/31] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 22/31] i2c: tegra: Factor out packet header setup " Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 23/31] i2c: tegra: Factor out register polling into separate function Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 24/31] i2c: tegra: Reorder location of functions in the code Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 25/31] i2c: tegra: Check errors for both positive and negative values Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 26/31] i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 27/31] i2c: tegra: Clean up printk messages Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 28/31] i2c: tegra: Clean up whitespaces, newlines and indentation Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 29/31] i2c: tegra: Improve driver module description Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 30/31] i2c: tegra: Clean up and improve comments Dmitry Osipenko
2020-09-05 22:47   ` Michał Mirosław
2020-09-05 22:53     ` Dmitry Osipenko
2020-09-05 22:58       ` Michał Mirosław
2020-09-05 20:41 ` [PATCH v4 31/31] i2c: tegra: Rename couple "ret" variables to "err" Dmitry Osipenko
2020-09-05 23:16 ` [PATCH v4 00/31] Improvements for Tegra I2C driver Michał Mirosław
2020-09-05 23:35   ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200905204151.25343-11-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mirq-linux@rere.qmqm.pl \
    --cc=thierry.reding@gmail.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).