linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: "Thierry Reding" <thierry.reding@gmail.com>,
	"Jonathan Hunter" <jonathanh@nvidia.com>,
	"Laxman Dewangan" <ldewangan@nvidia.com>,
	"Wolfram Sang" <wsa@the-dreams.de>,
	"Michał Mirosław" <mirq-linux@rere.qmqm.pl>,
	"Andy Shevchenko" <andy.shevchenko@gmail.com>
Cc: linux-i2c@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 27/31] i2c: tegra: Clean up printk messages
Date: Sat,  5 Sep 2020 23:41:47 +0300	[thread overview]
Message-ID: <20200905204151.25343-28-digetx@gmail.com> (raw)
In-Reply-To: <20200905204151.25343-1-digetx@gmail.com>

This patch unifies style of all messages in the driver by starting them
with a lowercase letter and using consistent capitalization and wording
for all messages.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/i2c/busses/i2c-tegra.c | 33 ++++++++++++---------------------
 1 file changed, 12 insertions(+), 21 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 3dd688e9462a..2dd97540f14f 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -377,7 +377,8 @@ static int tegra_i2c_dma_submit(struct tegra_i2c_dev *i2c_dev, size_t len)
 					       len, dir, DMA_PREP_INTERRUPT |
 					       DMA_CTRL_ACK);
 	if (!dma_desc) {
-		dev_err(i2c_dev->dev, "failed to get DMA descriptor\n");
+		dev_err(i2c_dev->dev, "failed to get %s DMA descriptor\n",
+			i2c_dev->msg_read ? "RX" : "TX");
 		return -EINVAL;
 	}
 
@@ -418,7 +419,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
 		return 0;
 
 	if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
-		dev_dbg(i2c_dev->dev, "Support for APB DMA not enabled!\n");
+		dev_dbg(i2c_dev->dev, "DMA support not enabled\n");
 		return 0;
 	}
 
@@ -444,7 +445,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
 	dma_buf = dma_alloc_coherent(i2c_dev->dev, i2c_dev->dma_buf_size,
 				     &dma_phys, GFP_KERNEL | __GFP_NOWARN);
 	if (!dma_buf) {
-		dev_err(i2c_dev->dev, "failed to allocate the DMA buffer\n");
+		dev_err(i2c_dev->dev, "failed to allocate DMA buffer\n");
 		err = -ENOMEM;
 		goto err_out;
 	}
@@ -541,7 +542,7 @@ static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
 	err = tegra_i2c_poll_register(i2c_dev, I2C_CONFIG_LOAD, 0xffffffff,
 				      1000, I2C_CONFIG_LOAD_TIMEOUT);
 	if (err) {
-		dev_warn(i2c_dev->dev, "timeout waiting for config load\n");
+		dev_err(i2c_dev->dev, "failed to load config\n");
 		return err;
 	}
 
@@ -825,7 +826,7 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 	status = i2c_readl(i2c_dev, I2C_INT_STATUS);
 
 	if (status == 0) {
-		dev_warn(i2c_dev->dev, "irq status 0 %08x %08x %08x\n",
+		dev_warn(i2c_dev->dev, "IRQ status 0 %08x %08x %08x\n",
 			 i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS),
 			 i2c_readl(i2c_dev, I2C_STATUS),
 			 i2c_readl(i2c_dev, I2C_CNFG));
@@ -970,8 +971,7 @@ static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
 		slv_config.device_fc = true;
 		ret = dmaengine_slave_config(chan, &slv_config);
 		if (ret) {
-			dev_err(i2c_dev->dev, "DMA slave config failed: %d\n",
-				ret);
+			dev_err(i2c_dev->dev, "DMA config failed: %d\n", ret);
 			dev_err(i2c_dev->dev, "falling back to PIO\n");
 			tegra_i2c_release_dma(i2c_dev);
 			i2c_dev->is_curr_dma_xfer = false;
@@ -1077,8 +1077,7 @@ static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
 
 	val = i2c_readl(i2c_dev, I2C_BUS_CLEAR_STATUS);
 	if (!(val & I2C_BC_STATUS)) {
-		dev_err(i2c_dev->dev,
-			"un-recovered arbitration lost\n");
+		dev_err(i2c_dev->dev, "un-recovered arbitration lost\n");
 		return -EIO;
 	}
 
@@ -1208,12 +1207,8 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 						   xfer_size,
 						   DMA_FROM_DEVICE);
 			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
-			if (err) {
-				dev_err(i2c_dev->dev,
-					"starting RX DMA failed, err %d\n",
-					err);
+			if (err)
 				return err;
-			}
 
 		} else {
 			dma_sync_single_for_cpu(i2c_dev->dev,
@@ -1233,12 +1228,8 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 						   xfer_size,
 						   DMA_TO_DEVICE);
 			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
-			if (err) {
-				dev_err(i2c_dev->dev,
-					"starting TX DMA failed, err %d\n",
-					err);
+			if (err)
 				return err;
-			}
 		} else {
 			tegra_i2c_fill_tx_fifo(i2c_dev);
 		}
@@ -1254,7 +1245,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	}
 
 	tegra_i2c_unmask_irq(i2c_dev, int_mask);
-	dev_dbg(i2c_dev->dev, "unmasked irq: %02x\n",
+	dev_dbg(i2c_dev->dev, "unmasked IRQ: %02x\n",
 		i2c_readl(i2c_dev, I2C_INT_MASK));
 
 	if (i2c_dev->is_curr_dma_xfer) {
@@ -1297,7 +1288,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	tegra_i2c_mask_irq(i2c_dev, int_mask);
 
 	if (time_left == 0) {
-		dev_err(i2c_dev->dev, "i2c transfer timed out\n");
+		dev_err(i2c_dev->dev, "I2C transfer timed out\n");
 		err = -ETIMEDOUT;
 		goto reset_hardware;
 	}
-- 
2.27.0


  parent reply	other threads:[~2020-09-05 20:43 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-05 20:41 [PATCH v4 00/31] Improvements for Tegra I2C driver Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 01/31] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 02/31] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 03/31] i2c: tegra: Initialization div-clk rate unconditionally Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 04/31] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 05/31] i2c: tegra: Runtime PM always available on Tegra Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 06/31] i2c: tegra: Remove error message used for devm_request_irq() failure Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 07/31] i2c: tegra: Use reset_control_reset() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 08/31] i2c: tegra: Use devm_platform_get_and_ioremap_resource() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 09/31] i2c: tegra: Use platform_get_irq() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 10/31] i2c: tegra: Use clk-bulk helpers Dmitry Osipenko
2020-09-05 21:56   ` Michał Mirosław
2020-09-05 22:08     ` Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 11/31] i2c: tegra: Factor out runtime PM and hardware initialization Dmitry Osipenko
2020-09-05 22:10   ` Michał Mirosław
2020-09-05 22:24     ` Dmitry Osipenko
2020-09-05 22:51       ` Michał Mirosław
2020-09-05 23:10         ` Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 12/31] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 13/31] i2c: tegra: Clean up probe function Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 14/31] i2c: tegra: Remove likely/unlikely from the code Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 15/31] i2c: tegra: Remove bogus barrier() Dmitry Osipenko
2020-09-05 23:35   ` Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 16/31] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg() Dmitry Osipenko
2020-09-05 22:23   ` Michał Mirosław
2020-09-05 22:36     ` Dmitry Osipenko
2020-09-05 22:49       ` Michał Mirosław
2020-09-05 22:54         ` Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 17/31] i2c: tegra: Improve formatting of function variables Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 18/31] i2c: tegra: Improve coding style of tegra_i2c_wait_for_config_load() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 19/31] i2c: tegra: Rename wait/poll functions Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 20/31] i2c: tegra: Rename variable in tegra_i2c_issue_bus_clear() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 21/31] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 22/31] i2c: tegra: Factor out packet header setup " Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 23/31] i2c: tegra: Factor out register polling into separate function Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 24/31] i2c: tegra: Reorder location of functions in the code Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 25/31] i2c: tegra: Check errors for both positive and negative values Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 26/31] i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg() Dmitry Osipenko
2020-09-05 20:41 ` Dmitry Osipenko [this message]
2020-09-05 20:41 ` [PATCH v4 28/31] i2c: tegra: Clean up whitespaces, newlines and indentation Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 29/31] i2c: tegra: Improve driver module description Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 30/31] i2c: tegra: Clean up and improve comments Dmitry Osipenko
2020-09-05 22:47   ` Michał Mirosław
2020-09-05 22:53     ` Dmitry Osipenko
2020-09-05 22:58       ` Michał Mirosław
2020-09-05 20:41 ` [PATCH v4 31/31] i2c: tegra: Rename couple "ret" variables to "err" Dmitry Osipenko
2020-09-05 23:16 ` [PATCH v4 00/31] Improvements for Tegra I2C driver Michał Mirosław
2020-09-05 23:35   ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200905204151.25343-28-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mirq-linux@rere.qmqm.pl \
    --cc=thierry.reding@gmail.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).