From: Rob Herring <robh@kernel.org>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 6/6] iio:pressure:ms5637: add ms5803 support
Date: Thu, 10 Dec 2020 21:34:13 -0600 [thread overview]
Message-ID: <20201211033413.GA3584721@robh.at.kernel.org> (raw)
In-Reply-To: <20201209234857.1521453-7-alexandre.belloni@bootlin.com>
On Thu, Dec 10, 2020 at 12:48:57AM +0100, Alexandre Belloni wrote:
> The ms5803 is very similar to the ms5805 but has less resolution options
> and has the 128bit PROM layout.
>
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
> drivers/iio/pressure/ms5637.c | 8 ++++++++
> 2 files changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
> index ab623ba930d5..84b0e44235c1 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> @@ -132,6 +132,8 @@ properties:
> - mcube,mc3230
> # MEMSIC 2-axis 8-bit digital accelerometer
> - memsic,mxc6225
> + # Measurement Specialities I2C pressure and temperature sensor
> + - meas,ms5803
Alphabetical order please.
> # Microchip differential I2C ADC, 1 Channel, 18 bit
> - microchip,mcp3421
> # Microchip differential I2C ADC, 2 Channel, 18 bit
> diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c
> index 2943b88734b3..39830a51ca78 100644
> --- a/drivers/iio/pressure/ms5637.c
> +++ b/drivers/iio/pressure/ms5637.c
> @@ -192,8 +192,15 @@ static const struct ms_tp_hw_data ms5637_hw_data = {
> .max_res_index = 5
> };
>
> +static const struct ms_tp_hw_data ms5803_hw_data = {
> + .prom_len = 8,
> + .max_res_index = 4
> +};
> +
> static const struct ms_tp_data ms5637_data = { .name = "ms5637", .hw = &ms5637_hw_data };
>
> +static const struct ms_tp_data ms5803_data = { .name = "ms5803", .hw = &ms5803_hw_data };
> +
> static const struct ms_tp_data ms5805_data = { .name = "ms5805", .hw = &ms5637_hw_data };
>
> static const struct ms_tp_data ms5837_data = { .name = "ms5837", .hw = &ms5637_hw_data };
> @@ -205,6 +212,7 @@ static const struct ms_tp_data ms8607_data = {
>
> static const struct of_device_id ms5637_of_match[] = {
> { .compatible = "meas,ms5637", .data = &ms5637_data },
> + { .compatible = "meas,ms5803", .data = &ms5803_data },
> { .compatible = "meas,ms5805", .data = &ms5805_data },
> { .compatible = "meas,ms5837", .data = &ms5837_data },
> { .compatible = "meas,ms8607-temppressure", .data = &ms8607_data },
> --
> 2.28.0
>
next prev parent reply other threads:[~2020-12-11 3:36 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-09 23:48 [PATCH 0/6] iio:pressure:ms5637: add ms5803 support Alexandre Belloni
2020-12-09 23:48 ` [PATCH 1/6] iio:pressure:ms5637: switch to probe_new Alexandre Belloni
2020-12-12 13:26 ` Andy Shevchenko
2020-12-13 17:04 ` Jonathan Cameron
2020-12-09 23:48 ` [PATCH 2/6] iio:pressure:ms5637: introduce hardware differentiation Alexandre Belloni
2020-12-13 17:12 ` Jonathan Cameron
2020-12-13 19:51 ` Alexandre Belloni
2020-12-09 23:48 ` [PATCH 3/6] iio:pressure:ms5637: limit available sample frequencies Alexandre Belloni
2020-12-12 18:26 ` Andy Shevchenko
2020-12-13 17:17 ` Jonathan Cameron
2020-12-09 23:48 ` [PATCH 4/6] iio:common:ms_sensors:ms_sensors_i2c: rework CRC calculation helper Alexandre Belloni
2020-12-09 23:48 ` [PATCH 5/6] iio:common:ms_sensors:ms_sensors_i2c: add support for alternative PROM layout Alexandre Belloni
2020-12-13 17:20 ` Jonathan Cameron
2020-12-13 19:34 ` Alexandre Belloni
2020-12-09 23:48 ` [PATCH 6/6] iio:pressure:ms5637: add ms5803 support Alexandre Belloni
2020-12-11 3:34 ` Rob Herring [this message]
2020-12-11 8:08 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201211033413.GA3584721@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).