From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Woojung Huh <woojung.huh@microchip.com>,
UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vivien Didelot <vivien.didelot@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
kernel@pengutronix.de, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
Russell King <linux@armlinux.org.uk>,
Michael Grzeschik <m.grzeschik@pengutronix.de>
Subject: [RFC PATCH v1 3/9] net: phy: micrel: use consistent indention after define
Date: Wed, 5 May 2021 11:20:19 +0200 [thread overview]
Message-ID: <20210505092025.8785-4-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20210505092025.8785-1-o.rempel@pengutronix.de>
This patch changes the indention to one space between "#define" and the
macro.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/phy/micrel.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index a14a00328fa3..227d88db7d27 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -38,15 +38,15 @@
/* general Interrupt control/status reg in vendor specific block. */
#define MII_KSZPHY_INTCS 0x1B
-#define KSZPHY_INTCS_JABBER BIT(15)
-#define KSZPHY_INTCS_RECEIVE_ERR BIT(14)
-#define KSZPHY_INTCS_PAGE_RECEIVE BIT(13)
-#define KSZPHY_INTCS_PARELLEL BIT(12)
-#define KSZPHY_INTCS_LINK_PARTNER_ACK BIT(11)
-#define KSZPHY_INTCS_LINK_DOWN BIT(10)
-#define KSZPHY_INTCS_REMOTE_FAULT BIT(9)
-#define KSZPHY_INTCS_LINK_UP BIT(8)
-#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
+#define KSZPHY_INTCS_JABBER BIT(15)
+#define KSZPHY_INTCS_RECEIVE_ERR BIT(14)
+#define KSZPHY_INTCS_PAGE_RECEIVE BIT(13)
+#define KSZPHY_INTCS_PARELLEL BIT(12)
+#define KSZPHY_INTCS_LINK_PARTNER_ACK BIT(11)
+#define KSZPHY_INTCS_LINK_DOWN BIT(10)
+#define KSZPHY_INTCS_REMOTE_FAULT BIT(9)
+#define KSZPHY_INTCS_LINK_UP BIT(8)
+#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
KSZPHY_INTCS_LINK_DOWN)
#define KSZPHY_INTCS_LINK_DOWN_STATUS BIT(2)
#define KSZPHY_INTCS_LINK_UP_STATUS BIT(0)
@@ -54,11 +54,11 @@
KSZPHY_INTCS_LINK_UP_STATUS)
/* PHY Control 1 */
-#define MII_KSZPHY_CTRL_1 0x1e
+#define MII_KSZPHY_CTRL_1 0x1e
/* PHY Control 2 / PHY Control (if no PHY Control 1) */
-#define MII_KSZPHY_CTRL_2 0x1f
-#define MII_KSZPHY_CTRL MII_KSZPHY_CTRL_2
+#define MII_KSZPHY_CTRL_2 0x1f
+#define MII_KSZPHY_CTRL MII_KSZPHY_CTRL_2
/* bitmap of PHY register to set interrupt mode */
#define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9)
#define KSZPHY_RMII_REF_CLK_SEL BIT(7)
--
2.29.2
next prev parent reply other threads:[~2021-05-05 9:22 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-05 9:20 [RFC PATCH v1 0/9] provide cable test support for the ksz886x Oleksij Rempel
2021-05-05 9:20 ` [RFC PATCH v1 1/9] net: phy: micrel: move phy reg offsets to common header Oleksij Rempel
2021-05-05 12:24 ` Andrew Lunn
2021-05-05 9:20 ` [RFC PATCH v1 2/9] net: dsa: microchip: ksz8795: add phylink support Oleksij Rempel
2021-05-06 12:13 ` Vladimir Oltean
2021-05-06 13:05 ` Oleksij Rempel
2021-05-06 13:28 ` Vladimir Oltean
2021-05-10 9:02 ` Oleksij Rempel
2021-05-05 9:20 ` Oleksij Rempel [this message]
2021-05-05 9:20 ` [RFC PATCH v1 4/9] net: phy: micrel: apply resume errata workaround for ksz8873 and ksz8863 Oleksij Rempel
2021-05-05 9:20 ` [RFC PATCH v1 5/9] net: phy: micrel: ksz886x add MDI-X support Oleksij Rempel
2021-05-05 12:37 ` Andrew Lunn
2021-05-10 9:10 ` Oleksij Rempel
2021-05-05 9:20 ` [RFC PATCH v1 6/9] net: phy: micrel: ksz8081 " Oleksij Rempel
2021-05-05 9:20 ` [RFC PATCH v1 7/9] net: dsa: microchip: ksz8795: add LINK_MD register support Oleksij Rempel
2021-05-05 9:20 ` [RFC PATCH v1 8/9] net: phy: micrel: ksz886x/ksz8081: add cabletest support Oleksij Rempel
2021-05-05 12:47 ` Andrew Lunn
2021-05-10 9:06 ` Oleksij Rempel
2021-05-10 12:44 ` Andrew Lunn
2021-05-05 9:20 ` [RFC PATCH v1 9/9] net: phy: micrel: add patch for erratas on port1 Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210505092025.8785-4-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=m.grzeschik@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=vivien.didelot@gmail.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).