From: Daniel Scally <djrscally@gmail.com>
To: Daniel Scally <djrscally@gmail.com>,
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Ezequiel Garcia <ezequiel@collabora.com>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>,
Yang Li <yang.lee@linux.alibaba.com>,
linux-media@vger.kernel.org (open list:MEDIA INPUT
INFRASTRUCTURE (V4L/DVB)),
linux-kernel@vger.kernel.org (open list)
Cc: Yong Zhi <yong.zhi@intel.com>, Bingbu Cao <bingbu.cao@intel.com>,
Tianshu Qiu <tian.shu.qiu@intel.com>,
Colin Ian King <colin.king@canonical.com>,
laurent.pinchart@ideasonboard.com,
kieran.bingham@ideasonboard.com
Subject: [PATCH 07/13] media: i2c: Add vblank control to ov8865
Date: Thu, 22 Jul 2021 21:34:01 +0100 [thread overview]
Message-ID: <20210722203407.3588046-8-djrscally@gmail.com> (raw)
In-Reply-To: <20210722203407.3588046-1-djrscally@gmail.com>
Add a V4L2_CID_VBLANK control to the ov8865 driver.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
---
drivers/media/i2c/ov8865.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/media/i2c/ov8865.c b/drivers/media/i2c/ov8865.c
index 09558a3342dd..daead1fc9314 100644
--- a/drivers/media/i2c/ov8865.c
+++ b/drivers/media/i2c/ov8865.c
@@ -183,6 +183,8 @@
#define OV8865_VTS_H(v) (((v) & GENMASK(11, 8)) >> 8)
#define OV8865_VTS_L_REG 0x380f
#define OV8865_VTS_L(v) ((v) & GENMASK(7, 0))
+#define OV8865_TIMING_MAX_VTS 0xffff
+#define OV8865_TIMING_MIN_VTS 0x04
#define OV8865_OFFSET_X_H_REG 0x3810
#define OV8865_OFFSET_X_H(v) (((v) & GENMASK(15, 8)) >> 8)
#define OV8865_OFFSET_X_L_REG 0x3811
@@ -658,6 +660,7 @@ struct ov8865_state {
struct ov8865_ctrls {
struct v4l2_ctrl *link_freq;
struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *vblank;
struct v4l2_ctrl_handler handler;
};
@@ -2212,6 +2215,20 @@ static int ov8865_test_pattern_configure(struct ov8865_sensor *sensor,
ov8865_test_pattern_bits[index]);
}
+/* Blanking */
+
+static int ov8865_vts_configure(struct ov8865_sensor *sensor, u32 vblank)
+{
+ u16 vts = sensor->state.mode->output_size_y + vblank;
+ int ret;
+
+ ret = ov8865_write(sensor, OV8865_VTS_H_REG, OV8865_VTS_H(vts));
+ if (ret)
+ return ret;
+
+ return ov8865_write(sensor, OV8865_VTS_L_REG, OV8865_VTS_L(vts));
+}
+
/* State */
static int ov8865_state_mipi_configure(struct ov8865_sensor *sensor,
@@ -2463,6 +2480,8 @@ static int ov8865_s_ctrl(struct v4l2_ctrl *ctrl)
case V4L2_CID_TEST_PATTERN:
index = (unsigned int)ctrl->val;
return ov8865_test_pattern_configure(sensor, index);
+ case V4L2_CID_VBLANK:
+ return ov8865_vts_configure(sensor, ctrl->val);
default:
return -EINVAL;
}
@@ -2479,6 +2498,8 @@ static int ov8865_ctrls_init(struct ov8865_sensor *sensor)
struct ov8865_ctrls *ctrls = &sensor->ctrls;
struct v4l2_ctrl_handler *handler = &ctrls->handler;
const struct v4l2_ctrl_ops *ops = &ov8865_ctrl_ops;
+ const struct ov8865_mode *mode = sensor->state.mode;
+ unsigned int vblank_max, vblank_def;
int ret;
v4l2_ctrl_handler_init(handler, 32);
@@ -2514,6 +2535,13 @@ static int ov8865_ctrls_init(struct ov8865_sensor *sensor)
ARRAY_SIZE(ov8865_test_pattern_menu) - 1,
0, 0, ov8865_test_pattern_menu);
+ /* Blanking */
+ vblank_max = OV8865_TIMING_MAX_VTS - mode->output_size_y;
+ vblank_def = mode->vts - mode->output_size_y;
+ ctrls->vblank = v4l2_ctrl_new_std(handler, ops, V4L2_CID_VBLANK,
+ OV8865_TIMING_MIN_VTS, vblank_max, 1,
+ vblank_def);
+
/* MIPI CSI-2 */
ctrls->link_freq =
@@ -2694,6 +2722,10 @@ static int ov8865_set_fmt(struct v4l2_subdev *subdev,
sensor->state.mbus_code != mbus_code)
ret = ov8865_state_configure(sensor, mode, mbus_code);
+ __v4l2_ctrl_modify_range(sensor->ctrls.vblank, OV8865_TIMING_MIN_VTS,
+ OV8865_TIMING_MAX_VTS - mode->output_size_y,
+ 1, mode->vts - mode->output_size_y);
+
complete:
mutex_unlock(&sensor->mutex);
@@ -3019,6 +3051,8 @@ static int ov8865_probe(struct i2c_client *client)
/* Sensor */
+ sensor->state.mode = &ov8865_modes[0];
+
ret = ov8865_ctrls_init(sensor);
if (ret)
goto error_mutex;
--
2.25.1
next prev parent reply other threads:[~2021-07-22 20:34 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-22 20:33 [PATCH 00/13] Extensions to ov8865 driver Daniel Scally
2021-07-22 20:33 ` [PATCH 01/13] media: i2c: Add ACPI support to ov8865 Daniel Scally
[not found] ` <CAHp75VfC1QMu=BcMZP8-vX_2paDp4CXqEYEDQnN+7=s3Up9VjA@mail.gmail.com>
2021-07-22 23:09 ` Daniel Scally
2021-07-22 20:33 ` [PATCH 02/13] media: i2c: Fix incorrect value in comment Daniel Scally
2021-07-23 7:44 ` Paul Kocialkowski
2021-07-23 9:17 ` Daniel Scally
2021-07-22 20:33 ` [PATCH 03/13] media: i2c: Defer probe if not endpoint found Daniel Scally
2021-07-23 7:49 ` Paul Kocialkowski
2021-07-23 9:15 ` Daniel Scally
2021-07-22 20:33 ` [PATCH 04/13] media: i2c: Support 19.2MHz input clock in ov8865 Daniel Scally
2021-07-22 20:33 ` [PATCH 05/13] media: i2c: Add .get_selection() support to ov8865 Daniel Scally
2021-07-23 8:13 ` kernel test robot
2021-07-22 20:34 ` [PATCH 06/13] media: i2c: Switch control to V4L2_CID_ANALOGUE_GAIN Daniel Scally
2021-07-23 7:57 ` Paul Kocialkowski
2021-07-23 12:00 ` Daniel Scally
2021-07-22 20:34 ` Daniel Scally [this message]
2021-07-22 20:34 ` [PATCH 08/13] media: i2c: Add hblank control to ov8865 Daniel Scally
2021-07-22 20:34 ` [PATCH 09/13] media: i2c: cap exposure at height + vblank in ov8865 Daniel Scally
2021-07-22 20:34 ` [PATCH 10/13] media: i2c: Add controls from fwnode to ov8865 Daniel Scally
2021-07-22 20:34 ` [PATCH 11/13] media: i2c: Switch exposure control unit to lines Daniel Scally
2021-07-22 20:34 ` [PATCH 12/13] media: i2c: Remove unused macros from ov8865 Daniel Scally
[not found] ` <CAHp75Vcmo8rD=WpECbKfpByBr1pAL+7gV2eycZ=3M+YDWUzOFw@mail.gmail.com>
2021-07-23 8:00 ` Paul Kocialkowski
2021-07-23 9:07 ` Daniel Scally
2021-07-22 20:34 ` [PATCH 13/13] media: ipu3-cio2: Add INT347A to cio2-bridge Daniel Scally
[not found] ` <CAHp75Vc60J1kTs0Kv5ibc+5zqCTvRDDAcmHFKFDi-4Qd-rBHuA@mail.gmail.com>
2021-07-22 23:07 ` Daniel Scally
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210722203407.3588046-8-djrscally@gmail.com \
--to=djrscally@gmail.com \
--cc=bingbu.cao@intel.com \
--cc=colin.king@canonical.com \
--cc=ezequiel@collabora.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
--cc=paul.kocialkowski@bootlin.com \
--cc=sakari.ailus@linux.intel.com \
--cc=tian.shu.qiu@intel.com \
--cc=yang.lee@linux.alibaba.com \
--cc=yong.zhi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).