From: sylv <sylv@sylv.io>
To: Guenter Roeck <linux@roeck-us.net>, Jean Delvare <jdelvare@suse.com>
Cc: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
Patrick Rudolph <patrick.rudolph@9elements.com>
Subject: Re: [PATCH v2 4/4] pmbus (pli1209bc): Add regulator support
Date: Mon, 14 Feb 2022 19:19:05 +0100 [thread overview]
Message-ID: <2cdb16a3d94506f453a5722c860d2f17b5dd5b1d.camel@sylv.io> (raw)
In-Reply-To: <62de6f93-12eb-838f-884d-f1ef96ab6e22@roeck-us.net>
On Mon, 2022-02-14 at 09:40 -0800, Guenter Roeck wrote:
> On 2/14/22 04:40, Marcello Sylvester Bauer wrote:
> > Add regulator support for PLI1209BC Digital Supervisor.
> >
> > Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> > ---
> > drivers/hwmon/pmbus/Kconfig | 7 +++++++
> > drivers/hwmon/pmbus/pli1209bc.c | 31
> > +++++++++++++++++++++++++++++++
> > 2 files changed, 38 insertions(+)
> >
> > diff --git a/drivers/hwmon/pmbus/Kconfig
> > b/drivers/hwmon/pmbus/Kconfig
> > index 831db423bea0..8b8f0d8733b2 100644
> > --- a/drivers/hwmon/pmbus/Kconfig
> > +++ b/drivers/hwmon/pmbus/Kconfig
> > @@ -319,6 +319,13 @@ config SENSORS_PLI1209BC
> > This driver can also be built as a module. If so, the
> > module will
> > be called pli1209bc.
> >
> > +config SENSORS_PLI1209BC_REGULATOR
> > + bool "Regulator support for PLI1209BC"
> > + depends on SENSORS_PLI1209BC && REGULATOR
> > + help
> > + If you say yes here you get regulator support for Vicor
> > PLI1209BC
> > + Digital Supervisor.
> > +
> > config SENSORS_PM6764TR
> > tristate "ST PM6764TR"
> > help
> > diff --git a/drivers/hwmon/pmbus/pli1209bc.c
> > b/drivers/hwmon/pmbus/pli1209bc.c
> > index 8a9af2ccc46f..7212d73f6e04 100644
> > --- a/drivers/hwmon/pmbus/pli1209bc.c
> > +++ b/drivers/hwmon/pmbus/pli1209bc.c
> > @@ -8,6 +8,7 @@
> > #include <linux/i2c.h>
> > #include <linux/module.h>
> > #include <linux/pmbus.h>
> > +#include <linux/regulator/driver.h>
> > #include "pmbus.h"
> >
> > /*
> > @@ -32,11 +33,37 @@ static int pli1209bc_read_word_data(struct
> > i2c_client *client, int page,
> > if (data < 0)
> > return data;
> > return data * 10;
> > + /*
> > + * PMBUS_READ_VOUT and PMBUS_READ_TEMPERATURE_1 return
> > invalid data
> > + * when the BCM is turned off. Since it is not possible to
> > return
> > + * ENODATA error, return zero instead.
> > + */
> > + case PMBUS_READ_VOUT:
> > + case PMBUS_READ_TEMPERATURE_1:
> > + data = pmbus_read_word_data(client, page, phase,
> > + PMBUS_STATUS_WORD);
> > + if (data < 0)
> > + return data;
> > + if (data & PB_STATUS_POWER_GOOD_N)
> > + return 0L;
>
> Why 0L ? The return value of pli1209bc_read_word_data() is int.
ack. 0L makes no sense here.
>
> > + return pmbus_read_word_data(client, page, phase,
> > reg);
> > default:
> > return -ENODATA;
> > }
> > }
> >
> > +#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
> > +static const struct regulator_desc pli1209bc_reg_desc = {
> > + .name = "vout2",
> > + .id = 1,
> > + .of_match = of_match_ptr("vout2"),
> > + .regulators_node = of_match_ptr("regulators"),
> > + .ops = &pmbus_regulator_ops,
> > + .type = REGULATOR_VOLTAGE,
> > + .owner = THIS_MODULE,
> > +};
> > +#endif
> > +
> > static struct pmbus_driver_info pli1209bc_info = {
> > .pages = 2,
> > .format[PSC_VOLTAGE_IN] = direct,
> > @@ -74,6 +101,10 @@ static struct pmbus_driver_info pli1209bc_info
> > = {
> > | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
> > | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT,
> > .read_word_data = pli1209bc_read_word_data,
> > +#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
> > + .num_regulators = 1,
> > + .reg_desc = &pli1209bc_reg_desc,
> > +#endif
> > };
> >
> > static int pli1209bc_probe(struct i2c_client *client)
>
prev parent reply other threads:[~2022-02-14 18:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-14 12:40 [PATCH v2 0/4] Support pli1209bc Digital Supervisor Marcello Sylvester Bauer
2022-02-14 12:40 ` [PATCH v2 1/4] dt-bindings: vendor-prefixes: add Vicor Corporation Marcello Sylvester Bauer
2022-02-14 12:40 ` [PATCH v2 2/4] dt-bindings:trivial-devices: Add pli1209bc Marcello Sylvester Bauer
2022-02-14 12:40 ` [PATCH v2 3/4] pmbus: Add support for pli1209bc Marcello Sylvester Bauer
2022-02-14 17:36 ` Guenter Roeck
2022-02-14 18:34 ` sylv
2022-02-14 12:40 ` [PATCH v2 4/4] pmbus (pli1209bc): Add regulator support Marcello Sylvester Bauer
2022-02-14 17:40 ` Guenter Roeck
2022-02-14 18:19 ` sylv [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2cdb16a3d94506f453a5722c860d2f17b5dd5b1d.camel@sylv.io \
--to=sylv@sylv.io \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=patrick.rudolph@9elements.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).