* Re: [2.6.0-test11]: It doesn't boot with a bootcd
[not found] <20031202213548.80808.qmail@web41211.mail.yahoo.com>
@ 2003-12-03 9:30 ` Jonathan Fors
2003-12-03 14:17 ` Jin Suh
0 siblings, 1 reply; 5+ messages in thread
From: Jonathan Fors @ 2003-12-03 9:30 UTC (permalink / raw)
To: Jin Suh, linux-kernel
Are you booting with Lilo? Then you could try to pass the vga=normal
parameter to the bootloader in lilo.conf . I'm not sure with Grub, but I
bet somebody else here is.
If you let the booting progress continue blind-headed, can you login or
wait for X to start? It's possible that the system actually boots, just
that you don't see it.
Jonathan
Jin Suh wrote:
>With framebuffer option on, it went to out ot range on my monitor shortly after
>I see Loading Linux.... and about 10 lines of boot messages (couldn't read the
>messages).
>Without framebuffer option, my monitor goes to a messed-up color right after I
>see Loading Linux... and few other lines.
>
>Thanks,
>Jin
>
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [2.6.0-test11]: It doesn't boot with a bootcd
2003-12-03 9:30 ` [2.6.0-test11]: It doesn't boot with a bootcd Jonathan Fors
@ 2003-12-03 14:17 ` Jin Suh
0 siblings, 0 replies; 5+ messages in thread
From: Jin Suh @ 2003-12-03 14:17 UTC (permalink / raw)
To: Jonathan Fors, linux-kernel
I use Lilo way as following:
append initrd=ramdisk.img root=/dev/ram0 rootfs=tmpfs vga=791
The "vga=normal" acts like no framebuffer (same problem). If I don't use the
framebuffer, I don't pass vga=791.
I don't see any boot ptompt and I watch the little led on cdrom. It doen't seem
to load anything. When I push the cd eject button, the cd comes out. Usually
when it loads, it doesn't come out by pushing the button.
Jin
--- Jonathan Fors <etnoy@myrealbox.com> wrote:
> Are you booting with Lilo? Then you could try to pass the vga=normal
> parameter to the bootloader in lilo.conf . I'm not sure with Grub, but I
> bet somebody else here is.
>
> If you let the booting progress continue blind-headed, can you login or
> wait for X to start? It's possible that the system actually boots, just
> that you don't see it.
>
> Jonathan
>
> Jin Suh wrote:
>
> >With framebuffer option on, it went to out ot range on my monitor shortly
> after
> >I see Loading Linux.... and about 10 lines of boot messages (couldn't read
> the
> >messages).
> >Without framebuffer option, my monitor goes to a messed-up color right after
> I
> >see Loading Linux... and few other lines.
> >
> >Thanks,
> >Jin
> >
> >
> >
>
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [2.6.0-test11]: It doesn't boot with a bootcd
2003-12-02 21:18 ` Jonathan Fors
@ 2003-12-02 21:38 ` Jin Suh
0 siblings, 0 replies; 5+ messages in thread
From: Jin Suh @ 2003-12-02 21:38 UTC (permalink / raw)
To: linux-kernel
With framebuffer option on, it went to out ot range on my monitor shortly after
I see Loading Linux.... and about 10 lines of boot messages (couldn't read the
messages).
Without framebuffer option, my monitor goes to a messed-up color right after I
see Loading Linux... and few other lines.
Thanks,
Jin
--- Jonathan Fors <etnoy@myrealbox.com> wrote:
> Jin Suh wrote:
>
> >Hi,
> >
> >I've been trying to build a bootcd with 2.6.0-test11 but it doesn't boot
> either
> >with framebuffer or without framebuffer. I also tried 2.6.0-testX-mm[1,2]
> but
> >same problems. I could make it work on test6 with no framebuffer once. But
> >test7 to test11 never worked. My bootcd works fine with 2.4.20. I upgraded
> >bin-utils, linux-utils, other tools and libraries to use 2.6.0 following
> the
> >Documentation/Changes file. My kernel config file is nothing special. It is
> >based on 2.4.20 and added few things like XFS. I used to see Oops crashes
> but I
> >don't see those any more but it stops in middle of booting and hangs. If any
> >bootcd builders are out there and have any experiences on 2.6.0-testx,
> please
> >let me know. Thanks in advance!
> >
> >Jin
> >
> >
> >__________________________________
> >Do you Yahoo!?
> >Free Pop-Up Blocker - Get it now
> >http://companion.yahoo.com/
> >-
> >To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> >the body of a message to majordomo@vger.kernel.org
> >More majordomo info at http://vger.kernel.org/majordomo-info.html
> >Please read the FAQ at http://www.tux.org/lkml/
> >
> >
> >
> >
> Jin, when does the hang during the boot occur?
>
> Jonathan
>
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [2.6.0-test11]: It doesn't boot with a bootcd
2003-12-02 20:36 Jin Suh
@ 2003-12-02 21:18 ` Jonathan Fors
2003-12-02 21:38 ` Jin Suh
0 siblings, 1 reply; 5+ messages in thread
From: Jonathan Fors @ 2003-12-02 21:18 UTC (permalink / raw)
To: Jin Suh; +Cc: linux-kernel
Jin Suh wrote:
>Hi,
>
>I've been trying to build a bootcd with 2.6.0-test11 but it doesn't boot either
>with framebuffer or without framebuffer. I also tried 2.6.0-testX-mm[1,2] but
>same problems. I could make it work on test6 with no framebuffer once. But
>test7 to test11 never worked. My bootcd works fine with 2.4.20. I upgraded
>bin-utils, linux-utils, other tools and libraries to use 2.6.0 following the
>Documentation/Changes file. My kernel config file is nothing special. It is
>based on 2.4.20 and added few things like XFS. I used to see Oops crashes but I
>don't see those any more but it stops in middle of booting and hangs. If any
>bootcd builders are out there and have any experiences on 2.6.0-testx, please
>let me know. Thanks in advance!
>
>Jin
>
>
>__________________________________
>Do you Yahoo!?
>Free Pop-Up Blocker - Get it now
>http://companion.yahoo.com/
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
>
>
>
Jin, when does the hang during the boot occur?
Jonathan
^ permalink raw reply [flat|nested] 5+ messages in thread
* [2.6.0-test11]: It doesn't boot with a bootcd
@ 2003-12-02 20:36 Jin Suh
2003-12-02 21:18 ` Jonathan Fors
0 siblings, 1 reply; 5+ messages in thread
From: Jin Suh @ 2003-12-02 20:36 UTC (permalink / raw)
To: linux-kernel
Hi,
I've been trying to build a bootcd with 2.6.0-test11 but it doesn't boot either
with framebuffer or without framebuffer. I also tried 2.6.0-testX-mm[1,2] but
same problems. I could make it work on test6 with no framebuffer once. But
test7 to test11 never worked. My bootcd works fine with 2.4.20. I upgraded
bin-utils, linux-utils, other tools and libraries to use 2.6.0 following the
Documentation/Changes file. My kernel config file is nothing special. It is
based on 2.4.20 and added few things like XFS. I used to see Oops crashes but I
don't see those any more but it stops in middle of booting and hangs. If any
bootcd builders are out there and have any experiences on 2.6.0-testx, please
let me know. Thanks in advance!
Jin
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2003-12-03 14:17 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20031202213548.80808.qmail@web41211.mail.yahoo.com>
2003-12-03 9:30 ` [2.6.0-test11]: It doesn't boot with a bootcd Jonathan Fors
2003-12-03 14:17 ` Jin Suh
2003-12-02 20:36 Jin Suh
2003-12-02 21:18 ` Jonathan Fors
2003-12-02 21:38 ` Jin Suh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).