linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brian King <brking@us.ibm.com>
To: Andi Kleen <ak@muc.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
	paulus@samba.org, benh@kernel.crashing.org,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/1] pci: Block config access during BIST (resend)
Date: Tue, 18 Jan 2005 17:36:19 -0600	[thread overview]
Message-ID: <41ED9D73.40103@us.ibm.com> (raw)
In-Reply-To: <20050118233103.GC66256@muc.de>

[-- Attachment #1: Type: text/plain, Size: 792 bytes --]

Andi Kleen wrote:
> On Tue, Jan 18, 2005 at 09:14:21AM -0600, Brian King wrote:
> 
>>Andi Kleen wrote:
>>
>>>As Brian said the device he was working with would just not answer,
>>>leading to a bus abort.  This would get ffffffff on a PC.
>>>You could simulate this if you want, although I think a EBUSY or EIO
>>>is better.
>>
>>Alan - are you satisfied with the most recent patch, or would you prefer 
>>the patch not returning failure return codes and just bit bucketing 
>>writes and returning all ff's on reads? Either way works for me.
> 
> 
> Hmm, I think i haven't seen a recent patch. But as long as it doesn't
> block in pci_config_* and is light weight there it's fine for me.
> 
> -Andi
> 

Here is my latest patch.


-- 
Brian King
eServer Storage I/O
IBM Linux Technology Center

[-- Attachment #2: pci_block_user_config_io_during_bist_again.patch --]
[-- Type: text/plain, Size: 13293 bytes --]


Some PCI adapters (eg. ipr scsi adapters) have an exposure today in that 
they issue BIST to the adapter to reset the card. If, during the time
it takes to complete BIST, userspace attempts to access PCI config space, 
the host bus bridge will master abort the access since the ipr adapter 
does not respond on the PCI bus for a brief period of time when running BIST. 
On PPC64 hardware, this master abort results in the host PCI bridge
isolating that PCI device from the rest of the system, making the device
unusable until Linux is rebooted. This patch is an attempt to close that
exposure by introducing some blocking code in the PCI code. When blocked,
writes will be humored and reads will return the cached value. Ben
Herrenschmidt has also mentioned that he plans to use this in PPC power
management.

Signed-off-by: Brian King <brking@us.ibm.com>
---

Signed-off-by: Brian King <brking@us.ibm.com>
---

 linux-2.6.11-rc1-bjking1/drivers/pci/access.c    |   81 +++++++++++++++++++++++
 linux-2.6.11-rc1-bjking1/drivers/pci/pci-sysfs.c |   10 +-
 linux-2.6.11-rc1-bjking1/drivers/pci/proc.c      |   28 +++----
 linux-2.6.11-rc1-bjking1/drivers/pci/syscall.c   |   12 +--
 linux-2.6.11-rc1-bjking1/include/linux/pci.h     |   12 +++
 5 files changed, 117 insertions(+), 26 deletions(-)

diff -puN drivers/pci/access.c~pci_block_user_config_io_during_bist_again drivers/pci/access.c
--- linux-2.6.11-rc1/drivers/pci/access.c~pci_block_user_config_io_during_bist_again	2005-01-13 15:57:15.000000000 -0600
+++ linux-2.6.11-rc1-bjking1/drivers/pci/access.c	2005-01-13 15:57:54.000000000 -0600
@@ -60,3 +60,84 @@ EXPORT_SYMBOL(pci_bus_read_config_dword)
 EXPORT_SYMBOL(pci_bus_write_config_byte);
 EXPORT_SYMBOL(pci_bus_write_config_word);
 EXPORT_SYMBOL(pci_bus_write_config_dword);
+
+#define PCI_USER_READ_CONFIG(size,type)	\
+int pci_user_read_config_##size	\
+	(struct pci_dev *dev, int pos, type *val)	\
+{									\
+	unsigned long flags;					\
+	int ret = 0;						\
+	u32 data = -1;						\
+	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
+	spin_lock_irqsave(&pci_lock, flags);		\
+	if (likely(!dev->block_ucfg_access))				\
+		ret = dev->bus->ops->read(dev->bus, dev->devfn, pos, sizeof(type), &data); \
+	else if (pos < sizeof(dev->saved_config_space))		\
+		data = dev->saved_config_space[pos/sizeof(dev->saved_config_space[0])]; \
+	spin_unlock_irqrestore(&pci_lock, flags);		\
+	*val = (type)data;					\
+	return ret;							\
+}
+
+#define PCI_USER_WRITE_CONFIG(size,type)	\
+int pci_user_write_config_##size	\
+	(struct pci_dev *dev, int pos, type val)		\
+{									\
+	unsigned long flags;					\
+	int ret = 0;						\
+	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
+	spin_lock_irqsave(&pci_lock, flags);		\
+	if (likely(!dev->block_ucfg_access))					\
+		ret = dev->bus->ops->write(dev->bus, dev->devfn, pos, sizeof(type), val); \
+	spin_unlock_irqrestore(&pci_lock, flags);		\
+	return ret;							\
+}
+
+PCI_USER_READ_CONFIG(byte, u8)
+PCI_USER_READ_CONFIG(word, u16)
+PCI_USER_READ_CONFIG(dword, u32)
+PCI_USER_WRITE_CONFIG(byte, u8)
+PCI_USER_WRITE_CONFIG(word, u16)
+PCI_USER_WRITE_CONFIG(dword, u32)
+
+/**
+ * pci_block_user_cfg_access - Block userspace PCI config reads/writes
+ * @dev:	pci device struct
+ *
+ * This function blocks any userspace PCI config accesses from occurring.
+ * When blocked, any writes will return -EBUSY and reads will return the
+ * data saved using pci_save_state for the first 64 bytes of config
+ * space and return -EBUSY for all other config reads.
+ *
+ * Return value:
+ * 	nothing
+ **/
+void pci_block_user_cfg_access(struct pci_dev *dev)
+{
+	unsigned long flags;
+
+	pci_save_state(dev);
+	spin_lock_irqsave(&pci_lock, flags);
+	dev->block_ucfg_access = 1;
+	spin_unlock_irqrestore(&pci_lock, flags);
+}
+EXPORT_SYMBOL(pci_block_user_cfg_access);
+
+/**
+ * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes
+ * @dev:	pci device struct
+ *
+ * This function allows userspace PCI config accesses to resume.
+ *
+ * Return value:
+ * 	nothing
+ **/
+void pci_unblock_user_cfg_access(struct pci_dev *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pci_lock, flags);
+	dev->block_ucfg_access = 0;
+	spin_unlock_irqrestore(&pci_lock, flags);
+}
+EXPORT_SYMBOL(pci_unblock_user_cfg_access);
diff -puN drivers/pci/pci-sysfs.c~pci_block_user_config_io_during_bist_again drivers/pci/pci-sysfs.c
--- linux-2.6.11-rc1/drivers/pci/pci-sysfs.c~pci_block_user_config_io_during_bist_again	2005-01-13 15:57:15.000000000 -0600
+++ linux-2.6.11-rc1-bjking1/drivers/pci/pci-sysfs.c	2005-01-13 15:57:15.000000000 -0600
@@ -110,7 +110,7 @@ pci_read_config(struct kobject *kobj, ch
 
 	while (off & 3) {
 		unsigned char val;
-		pci_read_config_byte(dev, off, &val);
+		pci_user_read_config_byte(dev, off, &val);
 		buf[off - init_off] = val;
 		off++;
 		if (--size == 0)
@@ -119,7 +119,7 @@ pci_read_config(struct kobject *kobj, ch
 
 	while (size > 3) {
 		unsigned int val;
-		pci_read_config_dword(dev, off, &val);
+		pci_user_read_config_dword(dev, off, &val);
 		buf[off - init_off] = val & 0xff;
 		buf[off - init_off + 1] = (val >> 8) & 0xff;
 		buf[off - init_off + 2] = (val >> 16) & 0xff;
@@ -130,7 +130,7 @@ pci_read_config(struct kobject *kobj, ch
 
 	while (size > 0) {
 		unsigned char val;
-		pci_read_config_byte(dev, off, &val);
+		pci_user_read_config_byte(dev, off, &val);
 		buf[off - init_off] = val;
 		off++;
 		--size;
@@ -154,7 +154,7 @@ pci_write_config(struct kobject *kobj, c
 	}
 
 	while (off & 3) {
-		pci_write_config_byte(dev, off, buf[off - init_off]);
+		pci_user_write_config_byte(dev, off, buf[off - init_off]);
 		off++;
 		if (--size == 0)
 			break;
@@ -171,7 +171,7 @@ pci_write_config(struct kobject *kobj, c
 	}
 
 	while (size > 0) {
-		pci_write_config_byte(dev, off, buf[off - init_off]);
+		pci_user_write_config_byte(dev, off, buf[off - init_off]);
 		off++;
 		--size;
 	}
diff -puN drivers/pci/proc.c~pci_block_user_config_io_during_bist_again drivers/pci/proc.c
--- linux-2.6.11-rc1/drivers/pci/proc.c~pci_block_user_config_io_during_bist_again	2005-01-13 15:57:15.000000000 -0600
+++ linux-2.6.11-rc1-bjking1/drivers/pci/proc.c	2005-01-13 15:57:15.000000000 -0600
@@ -79,7 +79,7 @@ proc_bus_pci_read(struct file *file, cha
 
 	if ((pos & 1) && cnt) {
 		unsigned char val;
-		pci_read_config_byte(dev, pos, &val);
+		pci_user_read_config_byte(dev, pos, &val);
 		__put_user(val, buf);
 		buf++;
 		pos++;
@@ -88,7 +88,7 @@ proc_bus_pci_read(struct file *file, cha
 
 	if ((pos & 3) && cnt > 2) {
 		unsigned short val;
-		pci_read_config_word(dev, pos, &val);
+		pci_user_read_config_word(dev, pos, &val);
 		__put_user(cpu_to_le16(val), (unsigned short __user *) buf);
 		buf += 2;
 		pos += 2;
@@ -97,7 +97,7 @@ proc_bus_pci_read(struct file *file, cha
 
 	while (cnt >= 4) {
 		unsigned int val;
-		pci_read_config_dword(dev, pos, &val);
+		pci_user_read_config_dword(dev, pos, &val);
 		__put_user(cpu_to_le32(val), (unsigned int __user *) buf);
 		buf += 4;
 		pos += 4;
@@ -106,7 +106,7 @@ proc_bus_pci_read(struct file *file, cha
 
 	if (cnt >= 2) {
 		unsigned short val;
-		pci_read_config_word(dev, pos, &val);
+		pci_user_read_config_word(dev, pos, &val);
 		__put_user(cpu_to_le16(val), (unsigned short __user *) buf);
 		buf += 2;
 		pos += 2;
@@ -115,7 +115,7 @@ proc_bus_pci_read(struct file *file, cha
 
 	if (cnt) {
 		unsigned char val;
-		pci_read_config_byte(dev, pos, &val);
+		pci_user_read_config_byte(dev, pos, &val);
 		__put_user(val, buf);
 		buf++;
 		pos++;
@@ -150,7 +150,7 @@ proc_bus_pci_write(struct file *file, co
 	if ((pos & 1) && cnt) {
 		unsigned char val;
 		__get_user(val, buf);
-		pci_write_config_byte(dev, pos, val);
+		pci_user_write_config_byte(dev, pos, val);
 		buf++;
 		pos++;
 		cnt--;
@@ -159,7 +159,7 @@ proc_bus_pci_write(struct file *file, co
 	if ((pos & 3) && cnt > 2) {
 		unsigned short val;
 		__get_user(val, (unsigned short __user *) buf);
-		pci_write_config_word(dev, pos, le16_to_cpu(val));
+		pci_user_write_config_word(dev, pos, le16_to_cpu(val));
 		buf += 2;
 		pos += 2;
 		cnt -= 2;
@@ -168,7 +168,7 @@ proc_bus_pci_write(struct file *file, co
 	while (cnt >= 4) {
 		unsigned int val;
 		__get_user(val, (unsigned int __user *) buf);
-		pci_write_config_dword(dev, pos, le32_to_cpu(val));
+		pci_user_write_config_dword(dev, pos, le32_to_cpu(val));
 		buf += 4;
 		pos += 4;
 		cnt -= 4;
@@ -177,7 +177,7 @@ proc_bus_pci_write(struct file *file, co
 	if (cnt >= 2) {
 		unsigned short val;
 		__get_user(val, (unsigned short __user *) buf);
-		pci_write_config_word(dev, pos, le16_to_cpu(val));
+		pci_user_write_config_word(dev, pos, le16_to_cpu(val));
 		buf += 2;
 		pos += 2;
 		cnt -= 2;
@@ -186,7 +186,7 @@ proc_bus_pci_write(struct file *file, co
 	if (cnt) {
 		unsigned char val;
 		__get_user(val, buf);
-		pci_write_config_byte(dev, pos, val);
+		pci_user_write_config_byte(dev, pos, val);
 		buf++;
 		pos++;
 		cnt--;
@@ -474,10 +474,10 @@ static int show_dev_config(struct seq_fi
 
 	drv = pci_dev_driver(dev);
 
-	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
-	pci_read_config_byte (dev, PCI_LATENCY_TIMER, &latency);
-	pci_read_config_byte (dev, PCI_MIN_GNT, &min_gnt);
-	pci_read_config_byte (dev, PCI_MAX_LAT, &max_lat);
+	pci_user_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
+	pci_user_read_config_byte (dev, PCI_LATENCY_TIMER, &latency);
+	pci_user_read_config_byte (dev, PCI_MIN_GNT, &min_gnt);
+	pci_user_read_config_byte (dev, PCI_MAX_LAT, &max_lat);
 	seq_printf(m, "  Bus %2d, device %3d, function %2d:\n",
 	       dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
 	class = pci_class_name(class_rev >> 16);
diff -puN drivers/pci/syscall.c~pci_block_user_config_io_during_bist_again drivers/pci/syscall.c
--- linux-2.6.11-rc1/drivers/pci/syscall.c~pci_block_user_config_io_during_bist_again	2005-01-13 15:57:15.000000000 -0600
+++ linux-2.6.11-rc1-bjking1/drivers/pci/syscall.c	2005-01-13 15:57:15.000000000 -0600
@@ -38,13 +38,13 @@ sys_pciconfig_read(unsigned long bus, un
 	lock_kernel();
 	switch (len) {
 	case 1:
-		cfg_ret = pci_read_config_byte(dev, off, &byte);
+		cfg_ret = pci_user_read_config_byte(dev, off, &byte);
 		break;
 	case 2:
-		cfg_ret = pci_read_config_word(dev, off, &word);
+		cfg_ret = pci_user_read_config_word(dev, off, &word);
 		break;
 	case 4:
-		cfg_ret = pci_read_config_dword(dev, off, &dword);
+		cfg_ret = pci_user_read_config_dword(dev, off, &dword);
 		break;
 	default:
 		err = -EINVAL;
@@ -112,7 +112,7 @@ sys_pciconfig_write(unsigned long bus, u
 		err = get_user(byte, (u8 __user *)buf);
 		if (err)
 			break;
-		err = pci_write_config_byte(dev, off, byte);
+		err = pci_user_write_config_byte(dev, off, byte);
 		if (err != PCIBIOS_SUCCESSFUL)
 			err = -EIO;
 		break;
@@ -121,7 +121,7 @@ sys_pciconfig_write(unsigned long bus, u
 		err = get_user(word, (u16 __user *)buf);
 		if (err)
 			break;
-		err = pci_write_config_word(dev, off, word);
+		err = pci_user_write_config_word(dev, off, word);
 		if (err != PCIBIOS_SUCCESSFUL)
 			err = -EIO;
 		break;
@@ -130,7 +130,7 @@ sys_pciconfig_write(unsigned long bus, u
 		err = get_user(dword, (u32 __user *)buf);
 		if (err)
 			break;
-		err = pci_write_config_dword(dev, off, dword);
+		err = pci_user_write_config_dword(dev, off, dword);
 		if (err != PCIBIOS_SUCCESSFUL)
 			err = -EIO;
 		break;
diff -puN include/linux/pci.h~pci_block_user_config_io_during_bist_again include/linux/pci.h
--- linux-2.6.11-rc1/include/linux/pci.h~pci_block_user_config_io_during_bist_again	2005-01-13 15:57:15.000000000 -0600
+++ linux-2.6.11-rc1-bjking1/include/linux/pci.h	2005-01-13 15:57:15.000000000 -0600
@@ -557,7 +557,8 @@ struct pci_dev {
 	/* keep track of device state */
 	unsigned int	is_enabled:1;	/* pci_enable_device has been called */
 	unsigned int	is_busmaster:1; /* device is busmaster */
-	
+	unsigned int	block_ucfg_access:1;	/* userspace config space access is blocked */
+
 	u32		saved_config_space[16]; /* config space saved at suspend time */
 	struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
 	int rom_attr_enabled;		/* has display of the rom attribute been enabled? */
@@ -801,6 +802,13 @@ static inline int pci_write_config_dword
 	return pci_bus_write_config_dword (dev->bus, dev->devfn, where, val);
 }
 
+int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
+int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
+int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val);
+int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val);
+int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val);
+int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
+
 int pci_enable_device(struct pci_dev *dev);
 int pci_enable_device_bars(struct pci_dev *dev, int mask);
 void pci_disable_device(struct pci_dev *dev);
@@ -896,6 +904,8 @@ extern void pci_disable_msix(struct pci_
 extern void msi_remove_pci_irq_vectors(struct pci_dev *dev);
 #endif
 
+extern void pci_block_user_cfg_access(struct pci_dev *dev);
+extern void pci_unblock_user_cfg_access(struct pci_dev *dev);
 #endif /* CONFIG_PCI */
 
 /* Include architecture-dependent settings and functions */
_

  reply	other threads:[~2005-01-18 23:38 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-01-10 14:49 [PATCH 1/1] pci: Block config access during BIST (resend) brking
2005-01-10 16:10 ` Andi Kleen
2005-01-10 16:25   ` Brian King
2005-01-10 16:29     ` Andi Kleen
2005-01-10 22:57       ` Brian King
2005-01-11 14:37         ` Alan Cox
2005-01-11 17:33           ` Andi Kleen
2005-01-11 22:17             ` Brian King
2005-01-13 15:36               ` Alan Cox
2005-01-13 15:35             ` Alan Cox
2005-01-13 18:03               ` Andi Kleen
2005-01-13 18:46                 ` Alan Cox
2005-01-13 20:23                   ` Andi Kleen
2005-01-13 19:44                     ` Alan Cox
2005-01-13 21:50                       ` Andi Kleen
2005-01-15  0:33                         ` Alan Cox
2005-01-15  1:44                           ` Andi Kleen
2005-01-15  1:01                             ` Alan Cox
2005-01-15  6:20                               ` Benjamin Herrenschmidt
2005-01-16  0:58                                 ` Alan Cox
2005-01-16  4:01                                   ` Benjamin Herrenschmidt
2005-01-16  4:48                                     ` Andi Kleen
2005-01-16 20:53                                       ` Benjamin Herrenschmidt
2005-01-16 22:07                                         ` Andi Kleen
2005-01-16 22:14                                           ` Benjamin Herrenschmidt
2005-01-16 21:10                                       ` Alan Cox
2005-01-18 15:14                     ` Brian King
2005-01-18 23:31                       ` Andi Kleen
2005-01-18 23:36                         ` Brian King [this message]
2005-01-19 22:40                       ` Alan Cox
2005-01-26 16:34                         ` Brian King
2005-01-26 22:10                           ` Benjamin Herrenschmidt
2005-01-27 15:53                             ` Alan Cox
2005-01-27 18:44                               ` Brian King
2005-01-27 23:15                               ` Benjamin Herrenschmidt
2005-01-28 14:35                               ` Brian King
2005-02-01  7:27                                 ` Greg KH
2005-02-01 15:12                                   ` Brian King
2005-02-01 15:44                                     ` Matthew Wilcox
2005-02-01 17:35                                       ` Brian King
2005-02-01 17:47                                         ` Matthew Wilcox
2005-02-01 19:01                                           ` Brian King
2005-02-01 23:00                                           ` Benjamin Herrenschmidt
2005-02-02 15:33                                           ` Brian King
2005-02-08 20:08                                             ` Greg KH
2005-06-21 16:08                                               ` Brian King
2005-08-23 15:11                                                 ` [PATCH 1/2] " Brian King
2005-08-23 15:14                                                   ` [PATCH 2/2] ipr: " Brian King
2005-09-01 23:03                                                   ` [PATCH 1/2] pci: " Andrew Morton
2005-09-02 23:56                                                     ` Brian King
2005-09-02 22:43                                                       ` Grant Grundler
2005-09-02 23:11                                                         ` Paul Mackerras
2005-09-03  0:08                                                           ` Grant Grundler
2005-09-03 23:37                                                             ` Brian King
2005-09-03 19:39                                                               ` Grant Grundler
2005-09-05 18:31                                                                 ` Brian King
2005-09-06  4:48                                                                   ` Grant Grundler
2005-09-06 14:28                                                                     ` Brian King
2005-09-07  5:49                                                                 ` Paul Mackerras
2005-09-07 14:58                                                                   ` Grant Grundler
2005-09-07 22:39                                                                     ` Paul Mackerras
2005-09-08  1:21                                                                       ` Grant Grundler
2005-09-08  3:05                                                                         ` Brian King
2005-09-08  4:08                                                                           ` Grant Grundler
2005-02-01 18:58                                       ` [PATCH 1/1] " Greg KH
2005-02-01 23:07                                         ` Benjamin Herrenschmidt
2005-02-01 22:58                                       ` Benjamin Herrenschmidt
2005-01-10 19:23   ` Alan Cox
  -- strict thread matches above, loose matches on Subject: below --
2004-12-14 19:41 brking

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=41ED9D73.40103@us.ibm.com \
    --to=brking@us.ibm.com \
    --cc=ak@muc.de \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).