From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org,
linux-rpi-kernel@lists.infradead.org,
bcm-kernel-feedback-list@broadcom.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Tim Gover <tim.gover@raspberrypi.com>,
Phil Elwell <phil@raspberrypi.com>,
Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v3 078/105] drm/vc4: hdmi: Remove vc4_hdmi_connector
Date: Wed, 27 May 2020 17:48:48 +0200 [thread overview]
Message-ID: <46734e1f79ca5983f0f0b92b04fb3240fa68816d.1590594512.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.aaf2100bd7da4609f8bcb8216247d4b4e4379639.1590594512.git-series.maxime@cerno.tech>
The vc4_hdmi_connector was only used to switch between drm_connector to
drm_encoder. However, we can now use vc4_hdmi to do the switch, so that
structure is redundant.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 19 ++++++++-----------
drivers/gpu/drm/vc4/vc4_hdmi.h | 23 ++---------------------
2 files changed, 10 insertions(+), 32 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 850111665839..963be5bc1d5f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -189,13 +189,10 @@ static const struct drm_connector_helper_funcs vc4_hdmi_connector_helper_funcs =
static int vc4_hdmi_connector_init(struct drm_device *dev,
struct vc4_hdmi *vc4_hdmi)
{
- struct vc4_hdmi_connector *hdmi_connector = &vc4_hdmi->connector;
- struct drm_connector *connector = &hdmi_connector->base;
+ struct drm_connector *connector = &vc4_hdmi->connector;
struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
int ret;
- hdmi_connector->encoder = encoder;
-
drm_connector_init_with_ddc(dev, connector,
&vc4_hdmi_connector_funcs,
DRM_MODE_CONNECTOR_HDMIA,
@@ -284,7 +281,7 @@ static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder)
{
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
- struct drm_connector *connector = &vc4_hdmi->connector.base;
+ struct drm_connector *connector = &vc4_hdmi->connector;
struct drm_connector_state *cstate = connector->state;
struct drm_crtc *crtc = encoder->crtc;
const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
@@ -663,7 +660,7 @@ static int vc4_hdmi_audio_startup(struct snd_pcm_substream *substream,
{
struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
- struct drm_connector *connector = &vc4_hdmi->connector.base;
+ struct drm_connector *connector = &vc4_hdmi->connector;
int ret;
if (vc4_hdmi->audio.substream && vc4_hdmi->audio.substream != substream)
@@ -837,7 +834,7 @@ static int vc4_hdmi_audio_eld_ctl_info(struct snd_kcontrol *kcontrol,
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
- struct drm_connector *connector = &vc4_hdmi->connector.base;
+ struct drm_connector *connector = &vc4_hdmi->connector;
uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
uinfo->count = sizeof(connector->eld);
@@ -850,7 +847,7 @@ static int vc4_hdmi_audio_eld_ctl_get(struct snd_kcontrol *kcontrol,
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
- struct drm_connector *connector = &vc4_hdmi->connector.base;
+ struct drm_connector *connector = &vc4_hdmi->connector;
memcpy(ucontrol->value.bytes.data, connector->eld,
sizeof(connector->eld));
@@ -1301,7 +1298,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
if (ret < 0)
goto err_destroy_conn;
- cec_fill_conn_info_from_drm(&conn_info, &vc4_hdmi->connector.base);
+ cec_fill_conn_info_from_drm(&conn_info, &vc4_hdmi->connector);
cec_s_conn_info(vc4_hdmi->cec_adap, &conn_info);
HDMI_WRITE(VC4_HDMI_CPU_MASK_SET, 0xffffffff);
@@ -1338,7 +1335,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
err_delete_cec_adap:
cec_delete_adapter(vc4_hdmi->cec_adap);
err_destroy_conn:
- vc4_hdmi_connector_destroy(&vc4_hdmi->connector.base);
+ vc4_hdmi_connector_destroy(&vc4_hdmi->connector);
#endif
err_destroy_encoder:
drm_encoder_cleanup(encoder);
@@ -1362,7 +1359,7 @@ static void vc4_hdmi_unbind(struct device *dev, struct device *master,
struct vc4_hdmi *vc4_hdmi = snd_soc_card_get_drvdata(card);
cec_unregister_adapter(vc4_hdmi->cec_adap);
- vc4_hdmi_connector_destroy(&vc4_hdmi->connector.base);
+ vc4_hdmi_connector_destroy(&vc4_hdmi->connector);
drm_encoder_cleanup(&vc4_hdmi->encoder.base.base);
clk_disable_unprepare(vc4_hdmi->hsm_clock);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 749a807cd1f3..88794136d2e4 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -21,23 +21,6 @@ to_vc4_hdmi_encoder(struct drm_encoder *encoder)
return container_of(encoder, struct vc4_hdmi_encoder, base.base);
}
-/* VC4 HDMI connector KMS struct */
-struct vc4_hdmi_connector {
- struct drm_connector base;
-
- /* Since the connector is attached to just the one encoder,
- * this is the reference to it so we can do the best_encoder()
- * hook.
- */
- struct drm_encoder *encoder;
-};
-
-static inline struct vc4_hdmi_connector *
-to_vc4_hdmi_connector(struct drm_connector *connector)
-{
- return container_of(connector, struct vc4_hdmi_connector, base);
-}
-
/* HDMI audio information */
struct vc4_hdmi_audio {
struct snd_soc_card card;
@@ -56,7 +39,7 @@ struct vc4_hdmi {
struct platform_device *pdev;
struct vc4_hdmi_encoder encoder;
- struct vc4_hdmi_connector connector;
+ struct drm_connector connector;
struct vc4_hdmi_audio audio;
@@ -81,9 +64,7 @@ struct vc4_hdmi {
static inline struct vc4_hdmi *
connector_to_vc4_hdmi(struct drm_connector *connector)
{
- struct vc4_hdmi_connector *_connector = to_vc4_hdmi_connector(connector);
-
- return container_of(_connector, struct vc4_hdmi, connector);
+ return container_of(connector, struct vc4_hdmi, connector);
}
static inline struct vc4_hdmi *
--
git-series 0.9.1
next prev parent reply other threads:[~2020-05-27 15:52 UTC|newest]
Thread overview: 151+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 15:47 [PATCH v3 000/105] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 001/105] reset: Move reset-simple header out of drivers/reset Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 002/105] reset: simple: Add reset callback Maxime Ripard
2020-05-27 16:03 ` Philipp Zabel
2020-05-27 15:47 ` [PATCH v3 003/105] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 004/105] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-06-04 17:26 ` Nicolas Saenz Julienne
2020-06-05 17:43 ` Maxime Ripard
2020-06-05 18:11 ` Nicolas Saenz Julienne
2020-06-05 17:56 ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 005/105] ARM: dts: bcm2711: Add HDMI DVP Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 006/105] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-05-27 19:12 ` Rob Herring
2020-06-02 15:00 ` Maxime Ripard
2020-06-17 20:21 ` Rob Herring
2020-05-27 15:47 ` [PATCH v3 007/105] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 008/105] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 009/105] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 010/105] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 011/105] drm/vc4: drv: Add include guards Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 012/105] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-05-27 16:27 ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 013/105] dt-bindings: display: Add support for the BCM2711 HVS Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 014/105] drm/vc4: Add support for the BCM2711 HVS5 Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 015/105] drm/vc4: hvs: Boost the core clock during modeset Maxime Ripard
2020-05-27 16:33 ` Eric Anholt
2020-06-02 12:52 ` Maxime Ripard
2020-06-02 17:52 ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 016/105] drm/vc4: plane: Improve LBM usage Maxime Ripard
2020-05-27 16:44 ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 017/105] drm/vc4: plane: Move planes creation to its own function Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 018/105] drm/vc4: plane: Move additional planes creation to driver Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 019/105] drm/vc4: plane: Register all the planes at once Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 020/105] drm/vc4: plane: Create overlays for any CRTC Maxime Ripard
2020-05-27 16:52 ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 021/105] drm/vc4: plane: Create more planes Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 022/105] drm/vc4: crtc: Rename SoC data structures Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 023/105] drm/vc4: crtc: Switch to of_device_get_match_data Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 024/105] drm/vc4: crtc: Move crtc state to common header Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 025/105] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 026/105] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 027/105] drm/vc4: crtc: Turn static const variable into a define Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 028/105] drm/vc4: crtc: Restrict HACT_ACT setup to DSI Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 029/105] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 030/105] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 031/105] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 032/105] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-05-27 16:54 ` Eric Anholt
2020-06-02 14:12 ` Maxime Ripard
2020-06-02 15:02 ` Dave Stevenson
2020-06-02 19:31 ` Eric Anholt
2020-06-02 20:03 ` Stefan Wahren
2020-06-03 13:14 ` Maxime Ripard
2020-06-03 15:26 ` Stefan Wahren
2020-06-12 15:35 ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 033/105] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-05-27 17:23 ` Eric Anholt
2020-06-16 15:04 ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 034/105] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 035/105] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 036/105] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 037/105] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 038/105] drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 039/105] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 040/105] drm/vc4: crtc: Turn pixelvalve reset into a function Maxime Ripard
2020-05-27 17:30 ` Eric Anholt
2020-05-27 15:48 ` [PATCH v3 041/105] drm/vc4: crtc: Move HVS mode config to HVS file Maxime Ripard
2020-05-27 18:26 ` Eric Anholt
2020-05-27 15:48 ` [PATCH v3 042/105] drm/vc4: crtc: Move PV dump to config_pv Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 043/105] drm/vc4: crtc: Move HVS init and close to a function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 044/105] drm/vc4: crtc: Move the HVS gamma LUT setup to our init function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 045/105] drm/vc4: hvs: Make sure our channel is reset Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 046/105] drm/vc4: hvs: Remove mode_set_nofb Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 047/105] drm/vc4: crtc: " Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 048/105] drm/vc4: crtc: Remove redundant pixelvalve reset Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 049/105] drm/vc4: crtc: Move HVS channel init before the PV initialisation Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 050/105] drm/vc4: encoder: Add finer-grained encoder callbacks Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 051/105] drm/vc4: crtc: Add a delay after disabling the PixelValve output Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 052/105] drm/vc4: crtc: Clear the PixelValve FIFO on disable Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 053/105] drm/vc4: crtc: Clear the PixelValve FIFO during configuration Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 054/105] drm/vc4: hvs: Make the stop_channel function public Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 055/105] drm/vc4: hvs: Introduce a function to get the assigned FIFO Maxime Ripard
2020-05-27 19:40 ` Eric Anholt
2020-06-03 9:43 ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 056/105] drm/vc4: crtc: Move the CRTC disable out Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 057/105] drm/vc4: drv: Disable the CRTC at boot time Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 058/105] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 059/105] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-05-27 19:24 ` Eric Anholt
2020-05-27 15:48 ` [PATCH v3 060/105] drm/vc4: crtc: Make state functions public Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 061/105] drm/vc4: crtc: Split CRTC data in two Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 062/105] drm/vc4: crtc: Only access the PixelValve registers if we have to Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 063/105] drm/vc4: crtc: Move the CRTC initialisation to a separate function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 064/105] drm/vc4: crtc: Change the HVS5 test for of_device_is_compatible Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 065/105] drm/vc4: crtc: Move the txp_armed function to the TXP Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 066/105] drm/vc4: txp: Turn the TXP into a CRTC of its own Maxime Ripard
2020-05-28 15:51 ` Emil Velikov
2020-06-10 18:40 ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 067/105] drm/vc4: crtc: Remove the feed_txp tests Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 068/105] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 069/105] drm/vc4: hdmi: Move structure to header Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 070/105] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-05-27 18:41 ` Eric Anholt
2020-06-02 15:54 ` Maxime Ripard
2020-06-03 17:32 ` Stefan Wahren
2020-06-05 14:35 ` Maxime Ripard
2020-06-06 8:06 ` Stefan Wahren
2020-06-11 13:34 ` Maxime Ripard
2020-06-14 16:16 ` Stefan Wahren
2020-06-16 12:30 ` Maxime Ripard
2020-06-16 19:09 ` Stefan Wahren
2020-05-27 15:48 ` [PATCH v3 071/105] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 072/105] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 073/105] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 074/105] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 075/105] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 076/105] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 077/105] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-05-27 15:48 ` Maxime Ripard [this message]
2020-05-27 15:48 ` [PATCH v3 079/105] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 080/105] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 081/105] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 082/105] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 083/105] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 084/105] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 085/105] drm/vc4: hdmi: Store the encoder type in the variant structure Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 086/105] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 087/105] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 088/105] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 089/105] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 090/105] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 091/105] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 092/105] drm/vc4: hdmi: Use clk_set_min_rate instead Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 093/105] drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 094/105] drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 095/105] drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 096/105] drm/vc4: hdmi: Add audio-related callbacks Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 097/105] drm/vc4: hdmi: Deal with multiple ALSA cards Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 098/105] drm/vc4: hdmi: Remove register dumps in enable Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 099/105] drm/vc4: hdmi: Always recenter the HDMI FIFO Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 100/105] drm/vc4: hdmi: Implement finer-grained hooks Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 101/105] drm/vc4: hdmi: Do the VID_CTL configuration at once Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 102/105] drm/vc4: hdmi: Switch to blank pixels when disabled Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 103/105] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 104/105] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-05-29 18:18 ` Rob Herring
2020-06-02 15:08 ` Maxime Ripard
2020-06-08 23:01 ` Rob Herring
2020-05-27 15:49 ` [PATCH v3 105/105] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-06-03 20:11 ` Stefan Wahren
2020-06-02 20:12 ` [PATCH v3 000/105] drm/vc4: Support BCM2711 Display Pipeline Stefan Wahren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46734e1f79ca5983f0f0b92b04fb3240fa68816d.1590594512.git-series.maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=nsaenzjulienne@suse.de \
--cc=phil@raspberrypi.com \
--cc=tim.gover@raspberrypi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).