From: Oliver Hartkopp <socketcan@hartkopp.net>
To: Fabio Baltieri <fabio.baltieri@gmail.com>,
Kurt Van Dijck <kurt.van.dijck@eia.be>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>,
Wolfgang Grandegger <wg@grandegger.com>,
linux-kernel@vger.kernel.org, linux-can@vger.kernel.org
Subject: Re: [PATCH v3] can: rename LED trigger name on netdev renames
Date: Tue, 11 Sep 2012 07:42:19 +0200 [thread overview]
Message-ID: <504ECF3B.1090709@hartkopp.net> (raw)
In-Reply-To: <20120910200844.GC546@vandijck-laurijssen.be>
On 10.09.2012 22:08, Kurt Van Dijck wrote:
> On Mon, Sep 10, 2012 at 09:01:21PM +0200, Oliver Hartkopp wrote:
>>>>> + if (msg == NETDEV_CHANGENAME) {
>>
>>
>> I do have a second remark.
>>
>> What about always using the notifiers to name the LED triggers?
>>
>> Looking into
>>
>> http://lxr.linux.no/#linux+v3.5.3/include/linux/netdevice.h#L1526
>>
>> we have NETDEV_CHANGENAME but what about
>>
>> NETDEV_REGISTER
>>
>> ???
>>
>> When changing and updating the LED trigger name always inside the notifier, we
>> should never run into any locking or race conditions ...
>>
>> What do you think about this idea?
>>
> But the initial name must have been set properly already in that case...
>
Yes it is.
See register_netdevice()
http://lxr.linux.no/#linux+v3.5.3/net/core/dev.c#L5453
at the end NETDEV_REGISTER is notified:
http://lxr.linux.no/#linux+v3.5.3/net/core/dev.c#L5552
So it would be pretty elegant to create the LED trigger name in the notifier.
This would allow to remove that code at the current init function too.
Regards,
Oliver
next prev parent reply other threads:[~2012-09-11 5:42 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-30 19:20 [PATCH can-next v3 1/2] can: add tx/rx LED trigger support Fabio Baltieri
2012-07-30 19:20 ` [PATCH can-next v3 2/2] can: flexcan: add " Fabio Baltieri
2012-07-30 21:17 ` [PATCH can-next v3 1/2] can: add tx/rx " Marc Kleine-Budde
2012-07-31 6:57 ` Fabio Baltieri
2012-07-31 7:10 ` Marc Kleine-Budde
2012-07-31 11:57 ` Fabio Baltieri
2012-07-31 12:00 ` Marc Kleine-Budde
2012-07-31 22:05 ` [PATCH can-next v4] " Fabio Baltieri
2012-08-01 9:36 ` Marc Kleine-Budde
2012-08-01 10:07 ` Marc Kleine-Budde
2012-08-01 10:30 ` Fabio Baltieri
2012-08-01 11:37 ` Marc Kleine-Budde
2012-08-01 11:49 ` [PATCH can-next v5 1/2] " Fabio Baltieri
2012-08-01 11:49 ` [PATCH can-next v5 2/2] can: flexcan: add " Fabio Baltieri
2012-08-01 11:53 ` Marc Kleine-Budde
2012-08-01 12:24 ` Fabio Baltieri
2012-08-01 12:30 ` Marc Kleine-Budde
2012-08-01 21:02 ` Marc Kleine-Budde
2012-08-01 11:59 ` [PATCH can-next v5 1/2] can: add tx/rx " Marc Kleine-Budde
2012-08-01 12:06 ` Oliver Hartkopp
2012-08-01 12:18 ` Marc Kleine-Budde
2012-08-01 18:21 ` [PATCH can-next v6] " Fabio Baltieri
2012-08-01 21:00 ` Marc Kleine-Budde
2012-08-01 22:38 ` Fabio Baltieri
2012-08-01 21:05 ` Oliver Hartkopp
2012-08-24 5:10 ` Kurt Van Dijck
2012-08-24 11:28 ` Marc Kleine-Budde
2012-08-24 12:42 ` Kurt Van Dijck
2012-08-24 22:01 ` Fabio Baltieri
2012-08-25 20:25 ` Kurt Van Dijck
2012-09-03 12:40 ` Marc Kleine-Budde
2012-09-03 18:13 ` Kurt Van Dijck
2012-09-03 18:29 ` Fabio Baltieri
2012-09-03 20:54 ` Oliver Hartkopp
2012-09-04 7:11 ` Kurt Van Dijck
2012-09-04 9:29 ` [PATCH] can: rename LED trigger name on netdev renames Kurt Van Dijck
2012-09-06 18:59 ` Fabio Baltieri
2012-09-06 19:31 ` Oliver Hartkopp
2012-09-06 20:46 ` Fabio Baltieri
2012-09-07 7:19 ` Kurt Van Dijck
2012-09-09 16:17 ` [PATCH v2] " Fabio Baltieri
2012-09-10 14:25 ` [PATCH] can: export a safe netdev_priv wrapper for candev Kurt Van Dijck
2012-09-10 18:22 ` Oliver Hartkopp
2012-09-10 18:29 ` Fabio Baltieri
2012-09-10 19:55 ` [PATCH v2] " Kurt Van Dijck
2012-09-10 14:28 ` [PATCH v3] can: rename LED trigger name on netdev renames Kurt Van Dijck
2012-09-10 18:25 ` Oliver Hartkopp
2012-09-10 18:40 ` Fabio Baltieri
2012-09-10 19:01 ` Oliver Hartkopp
2012-09-10 20:08 ` Kurt Van Dijck
2012-09-11 5:42 ` Oliver Hartkopp [this message]
2012-09-11 7:13 ` Fabio Baltieri
2012-09-12 7:22 ` Kurt Van Dijck
2012-09-11 8:05 ` Kurt Van Dijck
2012-09-10 20:06 ` [PATCH v4] " Kurt Van Dijck
2012-09-11 21:04 ` Fabio Baltieri
2012-09-04 20:15 ` [PATCH can-next v6] can: add tx/rx LED trigger support Fabio Baltieri
2012-09-06 10:33 ` Kurt Van Dijck
2012-09-06 11:17 ` Fabio Baltieri
2012-09-06 15:11 ` Kurt Van Dijck
2012-09-06 20:57 ` Fabio Baltieri
2012-09-07 7:04 ` Kurt Van Dijck
2012-09-07 18:59 ` Fabio Baltieri
2012-07-31 8:46 ` [PATCH can-next v3 1/2] " Wolfgang Grandegger
2012-07-31 10:12 ` Marc Kleine-Budde
2012-07-31 11:55 ` Fabio Baltieri
2012-07-31 12:14 ` Fabio Baltieri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=504ECF3B.1090709@hartkopp.net \
--to=socketcan@hartkopp.net \
--cc=fabio.baltieri@gmail.com \
--cc=kurt.van.dijck@eia.be \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).