linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Huacai Chen <chenhuacai@loongson.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>,
	linux-kernel@vger.kernel.org, Xuefeng Li <lixuefeng@loongson.cn>,
	Huacai Chen <chenhuacai@gmail.com>,
	Jiaxun Yang <jiaxun.yang@flygoat.com>
Subject: Re: [PATCH 3/9] irqchip/loongson-pch-pic: Add ACPI init support
Date: Tue, 06 Jul 2021 14:10:55 +0100	[thread overview]
Message-ID: <877di38u5c.wl-maz@kernel.org> (raw)
In-Reply-To: <20210706030904.1411775-4-chenhuacai@loongson.cn>

On Tue, 06 Jul 2021 04:08:58 +0100,
Huacai Chen <chenhuacai@loongson.cn> wrote:
> 
> We are preparing to add new Loongson (based on LoongArch, not MIPS)
> support. LoongArch use ACPI other than DT as its boot protocol, so
> add ACPI init support.
> 
> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
> ---
>  drivers/irqchip/irq-loongson-pch-pic.c | 120 ++++++++++++++++++++++++-
>  1 file changed, 119 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
> index a4eb8a2181c7..62382611995b 100644
> --- a/drivers/irqchip/irq-loongson-pch-pic.c
> +++ b/drivers/irqchip/irq-loongson-pch-pic.c
> @@ -1,6 +1,8 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /*
>   *  Copyright (C) 2020, Jiaxun Yang <jiaxun.yang@flygoat.com>
> + *			Jianmin Lv <lvjianmin@loongson.cn>
> + *			Huacai Chen <chenhuacai@loongson.cn>

Please drop this change. I'm in a position where I can verify who owns
the copyright to this code, and I seriously doubt that 100 lines of
boilerplate probing code give you any right over it.

>   *  Loongson PCH PIC support
>   */
>  
> @@ -15,6 +17,7 @@
>  #include <linux/of_address.h>
>  #include <linux/of_irq.h>
>  #include <linux/of_platform.h>
> +#include <linux/syscore_ops.h>
>  
>  /* Registers */
>  #define PCH_PIC_MASK		0x20
> @@ -32,14 +35,23 @@
>  #define PIC_COUNT		(PIC_COUNT_PER_REG * PIC_REG_COUNT)
>  #define PIC_REG_IDX(irq_id)	((irq_id) / PIC_COUNT_PER_REG)
>  #define PIC_REG_BIT(irq_id)	((irq_id) % PIC_COUNT_PER_REG)
> +#define PCH_PIC_SIZE		0x400
> +
> +static int nr_pch_pics;
>  
>  struct pch_pic {
>  	void __iomem		*base;
>  	struct irq_domain	*pic_domain;
> +	struct fwnode_handle	*domain_handle;
>  	u32			ht_vec_base;
>  	raw_spinlock_t		pic_lock;
> +	u32			saved_vec_en[PIC_REG_COUNT];
> +	u32			saved_vec_pol[PIC_REG_COUNT];
> +	u32			saved_vec_edge[PIC_REG_COUNT];
>  };
>  
> +struct pch_pic *pch_pic_priv[4];
> +
>  static void pch_pic_bitset(struct pch_pic *priv, int offset, int bit)
>  {
>  	u32 reg;
> @@ -137,6 +149,7 @@ static struct irq_chip pch_pic_irq_chip = {
>  	.irq_ack		= pch_pic_ack_irq,
>  	.irq_set_affinity	= irq_chip_set_affinity_parent,
>  	.irq_set_type		= pch_pic_set_type,
> +	.flags			= IRQCHIP_SKIP_SET_WAKE,
>  };
>  
>  static int pch_pic_alloc(struct irq_domain *domain, unsigned int virq,
> @@ -180,7 +193,7 @@ static void pch_pic_reset(struct pch_pic *priv)
>  	int i;
>  
>  	for (i = 0; i < PIC_COUNT; i++) {
> -		/* Write vectored ID */
> +		/* Write vector ID */
>  		writeb(priv->ht_vec_base + i, priv->base + PCH_INT_HTVEC(i));
>  		/* Hardcode route to HT0 Lo */
>  		writeb(1, priv->base + PCH_INT_ROUTE(i));
> @@ -198,6 +211,48 @@ static void pch_pic_reset(struct pch_pic *priv)
>  	}
>  }
>  
> +static int pch_pic_suspend(void)
> +{
> +	int i, j;
> +
> +	for (i = 0; i < nr_pch_pics; i++) {
> +		for (j = 0; j < PIC_REG_COUNT; j++) {
> +			pch_pic_priv[i]->saved_vec_pol[j] =
> +				readl(pch_pic_priv[i]->base + PCH_PIC_POL + 4 * j);
> +			pch_pic_priv[i]->saved_vec_edge[j] =
> +				readl(pch_pic_priv[i]->base + PCH_PIC_EDGE + 4 * j);
> +			pch_pic_priv[i]->saved_vec_en[j] =
> +				readl(pch_pic_priv[i]->base + PCH_PIC_MASK + 4 * j);
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static void pch_pic_resume(void)
> +{
> +	int i, j;
> +
> +	for (i = 0; i < nr_pch_pics; i++) {
> +		pch_pic_reset(pch_pic_priv[i]);
> +		for (j = 0; j < PIC_REG_COUNT; j++) {
> +			writel(pch_pic_priv[i]->saved_vec_pol[j],
> +					pch_pic_priv[i]->base + PCH_PIC_POL + 4 * j);
> +			writel(pch_pic_priv[i]->saved_vec_edge[j],
> +					pch_pic_priv[i]->base + PCH_PIC_EDGE + 4 * j);
> +			writel(pch_pic_priv[i]->saved_vec_en[j],
> +					pch_pic_priv[i]->base + PCH_PIC_MASK + 4 * j);
> +		}
> +	}
> +}
> +
> +static struct syscore_ops pch_pic_syscore_ops = {
> +	.suspend =  pch_pic_suspend,
> +	.resume =  pch_pic_resume,
> +};

None of this has anything to do with what is described in the commit
message. Please move this into its own patch.

> +
> +#ifdef CONFIG_OF
> +
>  static int pch_pic_of_init(struct device_node *node,
>  				struct device_node *parent)
>  {
> @@ -242,6 +297,9 @@ static int pch_pic_of_init(struct device_node *node,
>  	}
>  
>  	pch_pic_reset(priv);
> +	pch_pic_priv[0] = priv;
> +
> +	register_syscore_ops(&pch_pic_syscore_ops);
>  
>  	return 0;
>  
> @@ -254,3 +312,63 @@ static int pch_pic_of_init(struct device_node *node,
>  }
>  
>  IRQCHIP_DECLARE(pch_pic, "loongson,pch-pic-1.0", pch_pic_of_init);
> +
> +#endif
> +
> +#ifdef CONFIG_ACPI
> +
> +struct fwnode_handle *pch_pic_acpi_init(struct fwnode_handle *parent,
> +					struct acpi_madt_bio_pic *acpi_pchpic)
> +{
> +	int count;
> +	struct pch_pic *priv;
> +	struct irq_domain *parent_domain;
> +
> +	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return NULL;
> +
> +	raw_spin_lock_init(&priv->pic_lock);
> +	priv->base = ioremap(acpi_pchpic->address, acpi_pchpic->size);
> +	if (!priv->base)
> +		goto free_priv;
> +
> +	priv->domain_handle = irq_domain_alloc_fwnode(priv->base);
> +	if (!priv->domain_handle) {
> +		pr_err("Unable to allocate domain handle\n");
> +		goto iounmap_base;
> +	}
> +
> +	priv->ht_vec_base = acpi_pchpic->gsi_base;
> +	count = ((readq(priv->base) >> 48) & 0xff) + 1;
> +	parent_domain = irq_find_matching_fwnode(parent, DOMAIN_BUS_ANY);
> +	if (!parent_domain) {
> +		pr_err("Failed to find the parent domain\n");
> +		goto iounmap_base;
> +	}
> +
> +	priv->pic_domain = irq_domain_create_hierarchy(parent_domain, 0,
> +						count, priv->domain_handle,
> +						&pch_pic_domain_ops, priv);
> +
> +	if (!priv->pic_domain) {
> +		pr_err("Failed to create IRQ domain\n");
> +		goto iounmap_base;
> +	}
> +
> +	pch_pic_reset(priv);
> +	pch_pic_priv[nr_pch_pics++] = priv;
> +
> +	register_syscore_ops(&pch_pic_syscore_ops);
> +
> +	return priv->domain_handle;
> +
> +iounmap_base:
> +	iounmap(priv->base);
> +free_priv:
> +	kfree(priv);
> +
> +	return NULL;
> +}
> +
> +#endif

A lot of this code is common with its OF counterpart. How about making
this logic common?

	M.

-- 
Without deviation from the norm, progress is not possible.

  reply	other threads:[~2021-07-06 13:11 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-06  3:08 [PATCH 0/9] irqchip: Add LoongArch-related irqchip drivers Huacai Chen
2021-07-06  3:08 ` [PATCH 1/9] irqchip: Adjust Kconfig for Loongson Huacai Chen
2021-07-06  3:08 ` [PATCH 2/9] irqchip/loongson-pch-pic: Improve edge triggered interrupt support Huacai Chen
2021-07-06 13:06   ` Marc Zyngier
2021-07-09  3:00     ` Huacai Chen
2021-08-04 14:23       ` Marc Zyngier
2021-08-05 13:06         ` Huacai Chen
2021-07-06  3:08 ` [PATCH 3/9] irqchip/loongson-pch-pic: Add ACPI init support Huacai Chen
2021-07-06 13:10   ` Marc Zyngier [this message]
2021-07-07  4:50     ` Huacai Chen
2021-08-12 12:23       ` Huacai Chen
2021-08-12 13:28         ` Marc Zyngier
2021-08-16  3:19           ` Huacai Chen
2021-07-06  3:08 ` [PATCH 4/9] irqchip/loongson-pch-msi: " Huacai Chen
2021-07-06 13:12   ` Marc Zyngier
2021-07-07  4:51     ` Huacai Chen
2021-07-06  3:09 ` [PATCH 5/9] irqchip/loongson-htvec: " Huacai Chen
2021-07-06 13:13   ` Marc Zyngier
2021-07-07  4:52     ` Huacai Chen
2021-07-06  3:09 ` [PATCH 6/9] irqchip/loongson-liointc: " Huacai Chen
2021-07-06  3:09 ` [PATCH 7/9] irqchip: Add LoongArch CPU interrupt controller support Huacai Chen
2021-07-06 13:21   ` Marc Zyngier
2021-07-07  4:57     ` Huacai Chen
2021-07-06  3:09 ` [PATCH 8/9] irqchip: Add Loongson Extended I/O " Huacai Chen
2021-07-06  3:09 ` [PATCH 9/9] irqchip: Add Loongson PCH LPC " Huacai Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=877di38u5c.wl-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=chenhuacai@gmail.com \
    --cc=chenhuacai@loongson.cn \
    --cc=jiaxun.yang@flygoat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lixuefeng@loongson.cn \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).