[PATCH v2 2/2] leds-lm3530: replace 'pltfm' with 'pdata'

[PATCH v2 2/2] leds-lm3530: replace 'pltfm' with 'pdata'

[Kim, Milo]

Use 'pdata' rather than 'pltfm' in lm3530_init_registers().

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
---
 drivers/leds/leds-lm3530.c |   22 +++++++++++-----------
 1 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index 7005a5f..a7f24f7 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -153,11 +153,11 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
 	u8 als_imp_sel = 0;
 	u8 brightness;
 	u8 reg_val[LM3530_REG_MAX];
-	struct lm3530_platform_data *pltfm = drvdata->pdata;
+	struct lm3530_platform_data *pdata = drvdata->pdata;
 	struct i2c_client *client = drvdata->client;
 
-	gen_config = (pltfm->brt_ramp_law << LM3530_RAMP_LAW_SHIFT) |
-			((pltfm->max_current & 7) << LM3530_MAX_CURR_SHIFT);
+	gen_config = (pdata->brt_ramp_law << LM3530_RAMP_LAW_SHIFT) |
+			((pdata->max_current & 7) << LM3530_MAX_CURR_SHIFT);
 
 	if (drvdata->mode == LM3530_BL_MODE_MANUAL ||
 	    drvdata->mode == LM3530_BL_MODE_ALS)
@@ -165,27 +165,27 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
 
 	if (drvdata->mode == LM3530_BL_MODE_ALS) {
 		als_config =
-			(pltfm->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) |
+			(pdata->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) |
 			(LM3530_ENABLE_ALS) |
-			(pltfm->als_input_mode << LM3530_ALS_SEL_SHIFT);
+			(pdata->als_input_mode << LM3530_ALS_SEL_SHIFT);
 
 		als_imp_sel =
-			(pltfm->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) |
-			(pltfm->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
+			(pdata->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) |
+			(pdata->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
 	}
 
 	if (drvdata->mode == LM3530_BL_MODE_PWM)
 		gen_config |= (LM3530_ENABLE_PWM) |
-				(pltfm->pwm_pol_hi << LM3530_PWM_POL_SHIFT) |
+				(pdata->pwm_pol_hi << LM3530_PWM_POL_SHIFT) |
 				(LM3530_ENABLE_PWM_SIMPLE);
 
-	brt_ramp = (pltfm->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) |
-			(pltfm->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT);
+	brt_ramp = (pdata->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) |
+			(pdata->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT);
 
 	if (drvdata->brightness)
 		brightness = drvdata->brightness;
 	else
-		brightness = drvdata->brightness = pltfm->brt_val;
+		brightness = drvdata->brightness = pdata->brt_val;
 
 	if (brightness > drvdata->led_dev.max_brightness)
 		brightness = drvdata->led_dev.max_brightness;
-- 
1.7.4.1


Best Regards,
Milo (Woogyom) Kim
Texas Instruments Incorporated

Re: [PATCH v2 2/2] leds-lm3530: replace 'pltfm' with 'pdata'

[Linus Walleij]

On Wed, Jan 25, 2012 at 2:51 AM, Kim, Milo <Milo.Kim@ti.com> wrote:

> Use 'pdata' rather than 'pltfm' in lm3530_init_registers().
>
> Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Thanks,
Linus Walleij