linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V3] gpio: mxc: add power management support
@ 2018-07-18  1:25 Anson Huang
  2018-07-18  1:34 ` Fabio Estevam
  2018-07-29 20:24 ` Linus Walleij
  0 siblings, 2 replies; 3+ messages in thread
From: Anson Huang @ 2018-07-18  1:25 UTC (permalink / raw)
  To: linux-gpio, linux-kernel, linus.walleij; +Cc: Linux-imx, fabio.estevam

GPIO registers could lose context on i.MX7D, when
enter LPSR mode, the whole SoC will be powered off
except LPSR domain, GPIO banks will lose context
in this case, need to restore the context after
resume from LPSR mode.

This patch adds new compatible string for i.MX7D
which supports GPIO power off feature in suspend,
and adds the GPIO save/restore operations in noirq
suspend/resume phase, since GPIO is fundamental
module which could be used by other peripherals'
resume phase.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V2:
	Add compatible string for i.MX7D GPIO using i.MX35 type GPIO data, but
supporting power off feature in suspend.
 drivers/gpio/gpio-mxc.c | 73 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 2f28299..995cf0b 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -45,6 +45,15 @@ struct mxc_gpio_hwdata {
 	unsigned fall_edge;
 };
 
+struct mxc_gpio_reg_saved {
+	u32 icr1;
+	u32 icr2;
+	u32 imr;
+	u32 gdir;
+	u32 edge_sel;
+	u32 dr;
+};
+
 struct mxc_gpio_port {
 	struct list_head node;
 	void __iomem *base;
@@ -55,6 +64,8 @@ struct mxc_gpio_port {
 	struct gpio_chip gc;
 	struct device *dev;
 	u32 both_edges;
+	struct mxc_gpio_reg_saved gpio_saved_reg;
+	bool power_off;
 };
 
 static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
@@ -143,6 +154,7 @@ static const struct of_device_id mxc_gpio_dt_ids[] = {
 	{ .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], },
 	{ .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], },
 	{ .compatible = "fsl,imx35-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], },
+	{ .compatible = "fsl,imx7d-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], },
 	{ /* sentinel */ }
 };
 
@@ -434,6 +446,9 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	if (of_device_is_compatible(np, "fsl,imx7d-gpio"))
+		port->power_off = true;
+
 	/* disable the interrupt and clear the status */
 	writel(0, port->base + GPIO_IMR);
 	writel(~0, port->base + GPIO_ISR);
@@ -497,6 +512,8 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 
 	list_add_tail(&port->node, &mxc_gpio_ports);
 
+	platform_set_drvdata(pdev, port);
+
 	return 0;
 
 out_irqdomain_remove:
@@ -507,11 +524,67 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 	return err;
 }
 
+static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
+{
+	if (!port->power_off)
+		return;
+
+	port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1);
+	port->gpio_saved_reg.icr2 = readl(port->base + GPIO_ICR2);
+	port->gpio_saved_reg.imr = readl(port->base + GPIO_IMR);
+	port->gpio_saved_reg.gdir = readl(port->base + GPIO_GDIR);
+	port->gpio_saved_reg.edge_sel = readl(port->base + GPIO_EDGE_SEL);
+	port->gpio_saved_reg.dr = readl(port->base + GPIO_DR);
+}
+
+static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
+{
+	if (!port->power_off)
+		return;
+
+	writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1);
+	writel(port->gpio_saved_reg.icr2, port->base + GPIO_ICR2);
+	writel(port->gpio_saved_reg.imr, port->base + GPIO_IMR);
+	writel(port->gpio_saved_reg.gdir, port->base + GPIO_GDIR);
+	writel(port->gpio_saved_reg.edge_sel, port->base + GPIO_EDGE_SEL);
+	writel(port->gpio_saved_reg.dr, port->base + GPIO_DR);
+}
+
+static int __maybe_unused mxc_gpio_noirq_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct mxc_gpio_port *port = platform_get_drvdata(pdev);
+
+	mxc_gpio_save_regs(port);
+	clk_disable_unprepare(port->clk);
+
+	return 0;
+}
+
+static int __maybe_unused mxc_gpio_noirq_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct mxc_gpio_port *port = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = clk_prepare_enable(port->clk);
+	if (ret)
+		return ret;
+	mxc_gpio_restore_regs(port);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mxc_gpio_dev_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mxc_gpio_noirq_suspend, mxc_gpio_noirq_resume)
+};
+
 static struct platform_driver mxc_gpio_driver = {
 	.driver		= {
 		.name	= "gpio-mxc",
 		.of_match_table = mxc_gpio_dt_ids,
 		.suppress_bind_attrs = true,
+		.pm = &mxc_gpio_dev_pm_ops,
 	},
 	.probe		= mxc_gpio_probe,
 	.id_table	= mxc_gpio_devtype,
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH V3] gpio: mxc: add power management support
  2018-07-18  1:25 [PATCH V3] gpio: mxc: add power management support Anson Huang
@ 2018-07-18  1:34 ` Fabio Estevam
  2018-07-29 20:24 ` Linus Walleij
  1 sibling, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2018-07-18  1:34 UTC (permalink / raw)
  To: Anson Huang
  Cc: open list:GPIO SUBSYSTEM, linux-kernel, Linus Walleij,
	NXP Linux Team, Fabio Estevam

Hi Anson,

On Tue, Jul 17, 2018 at 10:25 PM, Anson Huang <Anson.Huang@nxp.com> wrote:
> GPIO registers could lose context on i.MX7D, when
> enter LPSR mode, the whole SoC will be powered off
> except LPSR domain, GPIO banks will lose context
> in this case, need to restore the context after
> resume from LPSR mode.
>
> This patch adds new compatible string for i.MX7D
> which supports GPIO power off feature in suspend,
> and adds the GPIO save/restore operations in noirq
> suspend/resume phase, since GPIO is fundamental
> module which could be used by other peripherals'
> resume phase.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Looks good for me, thanks:

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH V3] gpio: mxc: add power management support
  2018-07-18  1:25 [PATCH V3] gpio: mxc: add power management support Anson Huang
  2018-07-18  1:34 ` Fabio Estevam
@ 2018-07-29 20:24 ` Linus Walleij
  1 sibling, 0 replies; 3+ messages in thread
From: Linus Walleij @ 2018-07-29 20:24 UTC (permalink / raw)
  To: Anson Huang
  Cc: open list:GPIO SUBSYSTEM, linux-kernel, NXP Linux Team, Fabio Estevam

On Wed, Jul 18, 2018 at 3:30 AM Anson Huang <Anson.Huang@nxp.com> wrote:

> GPIO registers could lose context on i.MX7D, when
> enter LPSR mode, the whole SoC will be powered off
> except LPSR domain, GPIO banks will lose context
> in this case, need to restore the context after
> resume from LPSR mode.
>
> This patch adds new compatible string for i.MX7D
> which supports GPIO power off feature in suspend,
> and adds the GPIO save/restore operations in noirq
> suspend/resume phase, since GPIO is fundamental
> module which could be used by other peripherals'
> resume phase.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Patch applied with Fabio's ACK!

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2018-07-29 20:24 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-18  1:25 [PATCH V3] gpio: mxc: add power management support Anson Huang
2018-07-18  1:34 ` Fabio Estevam
2018-07-29 20:24 ` Linus Walleij

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).