From: Jamie Iles <jamie@nuviainc.com>
To: James Morse <james.morse@arm.com>
Cc: x86@kernel.org, linux-kernel@vger.kernel.org,
Fenghua Yu <fenghua.yu@intel.com>,
Reinette Chatre <reinette.chatre@intel.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
H Peter Anvin <hpa@zytor.com>, Babu Moger <Babu.Moger@amd.com>,
shameerali.kolothum.thodi@huawei.com,
Jamie Iles <jamie@nuviainc.com>,
D Scott Phillips OS <scott@os.amperecomputing.com>,
lcherian@marvell.com, bobo.shaobowang@huawei.com
Subject: Re: [PATCH v1 12/20] x86/recstrl: Add per-rmid arch private storage for overflow and chunks
Date: Wed, 11 Aug 2021 18:14:11 +0100 [thread overview]
Message-ID: <YRQFY+/vwsfTBeTd@hazel> (raw)
In-Reply-To: <20210729223610.29373-13-james.morse@arm.com>
Hi James,
On Thu, Jul 29, 2021 at 10:36:02PM +0000, James Morse wrote:
> resctrl_arch_rmid_read() is intended as the function that an
> architecture agnostic resctrl filesystem driver can use to
> read a value in bytes from a counter. Currently the function returns
> the mbm values in chunks directly from hardware. For bandwidth
> counters the resctrl filesystem provides the number of bytes
> ever seen. Internally mba_sc uses a second prev_bw_msr to calculate
> the bytes read since the last mba_sc invocation.
>
> MPAM's scaling of counters can be changed at runtime, reducing the
> resolution but increasing the range. When this is changed the prev_msr
> values need to be converted by the architecture code.
>
> Add storage for per-rmid private storage. The prev_msr and chunks
> values will move here to allow resctrl_arch_rmid_read() to always
> return the number of bytes read by this counter.
>
> Signed-off-by: James Morse <james.morse@arm.com>
> ---
> arch/x86/kernel/cpu/resctrl/core.c | 29 ++++++++++++++++++++++++++
> arch/x86/kernel/cpu/resctrl/internal.h | 13 ++++++++++++
> 2 files changed, 42 insertions(+)
>
> diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
> index 8a3c13c6c19f..27c93d12ca27 100644
> --- a/arch/x86/kernel/cpu/resctrl/core.c
> +++ b/arch/x86/kernel/cpu/resctrl/core.c
> @@ -432,6 +432,28 @@ static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d)
> return 0;
> }
>
> +static int arch_domain_mbm_alloc(u32 num_rmid, struct rdt_hw_domain *hw_dom)
> +{
> + size_t tsize;
> +
> + if (is_mbm_total_enabled()) {
> + tsize = sizeof(*hw_dom->arch_mbm_total);
> + hw_dom->arch_mbm_total = kcalloc(num_rmid, tsize, GFP_KERNEL);
> + if (!hw_dom->arch_mbm_total)
> + return -ENOMEM;
> + }
> + if (is_mbm_local_enabled()) {
> + tsize = sizeof(*hw_dom->arch_mbm_local);
> + hw_dom->arch_mbm_local = kcalloc(num_rmid, tsize, GFP_KERNEL);
> + if (!hw_dom->arch_mbm_local) {
> + kfree(hw_dom->arch_mbm_total);
> + return -ENOMEM;
> + }
> + }
> +
> + return 0;
> +}
> +
> /*
> * domain_add_cpu - Add a cpu to a resource's domain list.
> *
> @@ -481,6 +503,11 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
> return;
> }
>
> + if (r->mon_capable && arch_domain_mbm_alloc(r->num_rmid, hw_dom)) {
> + kfree(d);
Does this error path and subsequent ones in domain_add_cpu also need to
undo the allocations from arch_domain_mbm_alloc?
Thanks,
Jamie
next prev parent reply other threads:[~2021-08-11 17:14 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-29 22:35 [PATCH v1 00/20] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes James Morse
2021-07-29 22:35 ` [PATCH v1 01/20] x86/resctrl: Kill off alloc_enabled James Morse
2021-08-11 12:12 ` Jamie Iles
2021-09-01 21:18 ` Reinette Chatre
2021-07-29 22:35 ` [PATCH v1 02/20] x86/resctrl: Merge mon_capable and mon_enabled James Morse
2021-08-11 12:15 ` Jamie Iles
2021-08-11 15:16 ` James Morse
2021-07-29 22:35 ` [PATCH v1 03/20] x86/resctrl: Add domain online callback for resctrl work James Morse
2021-09-01 21:19 ` Reinette Chatre
2021-09-17 16:57 ` James Morse
2021-07-29 22:35 ` [PATCH v1 04/20] x86/resctrl: Add domain offline " James Morse
2021-08-11 16:10 ` Jamie Iles
2021-09-01 21:21 ` Reinette Chatre
2021-07-29 22:35 ` [PATCH v1 05/20] x86/resctrl: Create mba_sc configuration in the rdt_domain James Morse
2021-08-11 16:32 ` Jamie Iles
2021-08-31 16:24 ` James Morse
2021-09-01 21:22 ` Reinette Chatre
2021-09-17 16:57 ` James Morse
2021-07-29 22:35 ` [PATCH v1 06/20] x86/resctrl: Switch over to the resctrl mbps_val list James Morse
2021-09-01 21:25 ` Reinette Chatre
2021-09-17 16:57 ` James Morse
2021-09-17 18:20 ` Reinette Chatre
2021-10-01 16:02 ` James Morse
2021-07-29 22:35 ` [PATCH v1 07/20] x86/resctrl: Remove architecture copy of mbps_val James Morse
2021-09-01 21:26 ` Reinette Chatre
2021-09-17 16:57 ` James Morse
2021-07-29 22:35 ` [PATCH v1 08/20] x86/resctrl: Remove set_mba_sc()s control array re-initialisation James Morse
2021-07-29 22:35 ` [PATCH v1 09/20] x86/resctrl: Abstract and use supports_mba_mbps() James Morse
2021-09-01 21:27 ` Reinette Chatre
2021-09-17 16:57 ` James Morse
2021-09-24 6:23 ` tan.shaopeng
2021-10-01 16:01 ` James Morse
2021-07-29 22:36 ` [PATCH v1 10/20] x86/resctrl: Allow update_mba_bw() to update controls directly James Morse
2021-09-01 21:28 ` Reinette Chatre
2021-07-29 22:36 ` [PATCH v1 11/20] x86/resctrl: Calculate bandwidth from the total bytes counter James Morse
2021-09-01 21:31 ` Reinette Chatre
2021-09-17 16:58 ` James Morse
2021-07-29 22:36 ` [PATCH v1 12/20] x86/recstrl: Add per-rmid arch private storage for overflow and chunks James Morse
2021-08-11 17:14 ` Jamie Iles [this message]
2021-08-31 16:25 ` James Morse
2021-07-29 22:36 ` [PATCH v1 13/20] x86/recstrl: Allow per-rmid arch private storage to be reset James Morse
2021-09-24 6:34 ` tan.shaopeng
2021-10-01 16:01 ` James Morse
2021-07-29 22:36 ` [PATCH v1 14/20] x86/resctrl: Abstract __rmid_read() James Morse
2021-07-29 22:36 ` [PATCH v1 15/20] x86/resctrl: Pass the required parameters into resctrl_arch_rmid_read() James Morse
2021-07-29 22:36 ` [PATCH v1 16/20] x86/resctrl: Move mbm_overflow_count() " James Morse
2021-07-29 22:36 ` [PATCH v1 17/20] x86/resctrl: Move get_corrected_mbm_count() " James Morse
2021-07-29 22:36 ` [PATCH v1 18/20] x86/resctrl: Rename and change the units of resctrl_cqm_threshold James Morse
2021-07-29 22:36 ` [PATCH v1 19/20] x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's boot_cpu_data James Morse
2021-07-29 22:36 ` [PATCH v1 20/20] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes James Morse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YRQFY+/vwsfTBeTd@hazel \
--to=jamie@nuviainc.com \
--cc=Babu.Moger@amd.com \
--cc=bobo.shaobowang@huawei.com \
--cc=bp@alien8.de \
--cc=fenghua.yu@intel.com \
--cc=hpa@zytor.com \
--cc=james.morse@arm.com \
--cc=lcherian@marvell.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=reinette.chatre@intel.com \
--cc=scott@os.amperecomputing.com \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).