* [PATCH] drm/stm: ltdc: remove clk_round_rate comment
@ 2019-05-10 15:03 Yannick Fertré
2019-05-10 16:40 ` Philippe CORNU
0 siblings, 1 reply; 3+ messages in thread
From: Yannick Fertré @ 2019-05-10 15:03 UTC (permalink / raw)
To: Yannick Fertre, Philippe Cornu, Benjamin Gaignard,
Vincent Abriou, David Airlie, Daniel Vetter, Maxime Coquelin,
Alexandre Torgue, dri-devel, linux-stm32, linux-arm-kernel,
linux-kernel
Clk_round_rate returns rounded clock without changing
the hardware in any way.
This function couldn't replace set_rate/get_rate calls.
Todo comment has been removed & a new log inserted.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
drivers/gpu/drm/stm/ltdc.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 97912e2..2f8aa2e 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -507,20 +507,16 @@ static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc,
struct ltdc_device *ldev = crtc_to_ltdc(crtc);
int rate = mode->clock * 1000;
- /*
- * TODO clk_round_rate() does not work yet. When ready, it can
- * be used instead of clk_set_rate() then clk_get_rate().
- */
-
- clk_disable(ldev->pixel_clk);
if (clk_set_rate(ldev->pixel_clk, rate) < 0) {
DRM_ERROR("Cannot set rate (%dHz) for pixel clk\n", rate);
return false;
}
- clk_enable(ldev->pixel_clk);
adjusted_mode->clock = clk_get_rate(ldev->pixel_clk) / 1000;
+ DRM_DEBUG_DRIVER("requested clock %dkHz, adjusted clock %dkHz\n",
+ mode->clock, adjusted_mode->clock);
+
return true;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] drm/stm: ltdc: remove clk_round_rate comment
2019-05-10 15:03 [PATCH] drm/stm: ltdc: remove clk_round_rate comment Yannick Fertré
@ 2019-05-10 16:40 ` Philippe CORNU
2019-05-13 13:12 ` Yannick FERTRE
0 siblings, 1 reply; 3+ messages in thread
From: Philippe CORNU @ 2019-05-10 16:40 UTC (permalink / raw)
To: Yannick FERTRE, Benjamin GAIGNARD, Vincent ABRIOU, David Airlie,
Daniel Vetter, Maxime Coquelin, Alexandre TORGUE, dri-devel,
linux-stm32, linux-arm-kernel, linux-kernel
Dear Yannick,
Thank you for your patch,
In your patch, you have removed clk_disable() & clk_enable().
Could you please double confirm ?
thanks
Philippe :-)
On 5/10/19 5:03 PM, Yannick Fertré wrote:
> Clk_round_rate returns rounded clock without changing
> the hardware in any way.
> This function couldn't replace set_rate/get_rate calls.
> Todo comment has been removed & a new log inserted.
>
> Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
> ---
> drivers/gpu/drm/stm/ltdc.c | 10 +++-------
> 1 file changed, 3 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> index 97912e2..2f8aa2e 100644
> --- a/drivers/gpu/drm/stm/ltdc.c
> +++ b/drivers/gpu/drm/stm/ltdc.c
> @@ -507,20 +507,16 @@ static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc,
> struct ltdc_device *ldev = crtc_to_ltdc(crtc);
> int rate = mode->clock * 1000;
>
> - /*
> - * TODO clk_round_rate() does not work yet. When ready, it can
> - * be used instead of clk_set_rate() then clk_get_rate().
> - */
> -
> - clk_disable(ldev->pixel_clk);
> if (clk_set_rate(ldev->pixel_clk, rate) < 0) {
> DRM_ERROR("Cannot set rate (%dHz) for pixel clk\n", rate);
> return false;
> }
> - clk_enable(ldev->pixel_clk);
>
> adjusted_mode->clock = clk_get_rate(ldev->pixel_clk) / 1000;
>
> + DRM_DEBUG_DRIVER("requested clock %dkHz, adjusted clock %dkHz\n",
> + mode->clock, adjusted_mode->clock);
> +
> return true;
> }
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] drm/stm: ltdc: remove clk_round_rate comment
2019-05-10 16:40 ` Philippe CORNU
@ 2019-05-13 13:12 ` Yannick FERTRE
0 siblings, 0 replies; 3+ messages in thread
From: Yannick FERTRE @ 2019-05-13 13:12 UTC (permalink / raw)
To: Philippe CORNU, Benjamin GAIGNARD, Vincent ABRIOU, David Airlie,
Daniel Vetter, Maxime Coquelin, Alexandre TORGUE, dri-devel,
linux-stm32, linux-arm-kernel, linux-kernel
Dear Philippe,
you're right, clk_disable() & clk_enable() are necessary with STM32F4
SOC (not for STM32MP1).
I'll revert this part of the patch.
Many thanks
--
Yannick Fertré | TINA: 166 7152 | Tel: +33 244027152 | Mobile: +33 620600270
Microcontrollers and Digital ICs Group | Microcontrolleurs Division
On 5/10/19 6:40 PM, Philippe CORNU wrote:
> Dear Yannick,
> Thank you for your patch,
>
> In your patch, you have removed clk_disable() & clk_enable().
> Could you please double confirm ?
>
> thanks
> Philippe :-)
>
>
> On 5/10/19 5:03 PM, Yannick Fertré wrote:
>> Clk_round_rate returns rounded clock without changing
>> the hardware in any way.
>> This function couldn't replace set_rate/get_rate calls.
>> Todo comment has been removed & a new log inserted.
>>
>> Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
>> ---
>> drivers/gpu/drm/stm/ltdc.c | 10 +++-------
>> 1 file changed, 3 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
>> index 97912e2..2f8aa2e 100644
>> --- a/drivers/gpu/drm/stm/ltdc.c
>> +++ b/drivers/gpu/drm/stm/ltdc.c
>> @@ -507,20 +507,16 @@ static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc,
>> struct ltdc_device *ldev = crtc_to_ltdc(crtc);
>> int rate = mode->clock * 1000;
>>
>> - /*
>> - * TODO clk_round_rate() does not work yet. When ready, it can
>> - * be used instead of clk_set_rate() then clk_get_rate().
>> - */
>> -
>> - clk_disable(ldev->pixel_clk);
>> if (clk_set_rate(ldev->pixel_clk, rate) < 0) {
>> DRM_ERROR("Cannot set rate (%dHz) for pixel clk\n", rate);
>> return false;
>> }
>> - clk_enable(ldev->pixel_clk);
>>
>> adjusted_mode->clock = clk_get_rate(ldev->pixel_clk) / 1000;
>>
>> + DRM_DEBUG_DRIVER("requested clock %dkHz, adjusted clock %dkHz\n",
>> + mode->clock, adjusted_mode->clock);
>> +
>> return true;
>> }
>>
--
Yannick Fertré | TINA: 166 7152 | Tel: +33 244027152 | Mobile: +33 620600270
Microcontrollers and Digital ICs Group | Microcontrolleurs Division
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-05-13 13:13 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-10 15:03 [PATCH] drm/stm: ltdc: remove clk_round_rate comment Yannick Fertré
2019-05-10 16:40 ` Philippe CORNU
2019-05-13 13:12 ` Yannick FERTRE
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).