linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>,
	David Brown <david.brown@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@armlinux.org.uk>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Arun Kumar Neelakantam <aneela@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-kernel-owner@vger.kernel.org
Subject: Re: [PATCH v2 5/7] remoteproc: q6v5-mss: Active powerdomain for SDM845
Date: Wed, 09 Jan 2019 20:10:25 +0530	[thread overview]
Message-ID: <df33fe44c56424ca1d5865c972e0034e@codeaurora.org> (raw)
In-Reply-To: <20190106080915.4493-6-bjorn.andersson@linaro.org>

On 2019-01-06 13:39, Bjorn Andersson wrote:
> The SDM845 MSS needs the load_state powerdomain voted for during the
> duration of the MSS being powered on, to let the AOSS know that it may
> not perform certain power save measures. So vote for this.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> Changes since v1:
> - New patch
> 

Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>

>  drivers/remoteproc/qcom_q6v5_mss.c | 31 ++++++++++++++++++++++++++++--
>  1 file changed, 29 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c
> b/drivers/remoteproc/qcom_q6v5_mss.c
> index 62cf16ddb7af..7f86d9c551c4 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -133,6 +133,7 @@ struct rproc_hexagon_res {
>  	char **proxy_clk_names;
>  	char **reset_clk_names;
>  	char **active_clk_names;
> +	char **active_pd_names;
>  	char **proxy_pd_names;
>  	int version;
>  	bool need_mem_protection;
> @@ -159,10 +160,12 @@ struct q6v5 {
>  	struct clk *active_clks[8];
>  	struct clk *reset_clks[4];
>  	struct clk *proxy_clks[4];
> +	struct device *active_pds[1];
>  	struct device *proxy_pds[3];
>  	int active_clk_count;
>  	int reset_clk_count;
>  	int proxy_clk_count;
> +	int active_pd_count;
>  	int proxy_pd_count;
> 
>  	struct reg_info active_regs[1];
> @@ -730,10 +733,16 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> 
>  	qcom_q6v5_prepare(&qproc->q6v5);
> 
> +	ret = q6v5_pds_enable(qproc, qproc->active_pds, 
> qproc->active_pd_count);
> +	if (ret < 0) {
> +		dev_err(qproc->dev, "failed to enable active power domains\n");
> +		goto disable_irqs;
> +	}
> +
>  	ret = q6v5_pds_enable(qproc, qproc->proxy_pds, 
> qproc->proxy_pd_count);
>  	if (ret < 0) {
>  		dev_err(qproc->dev, "failed to enable proxy power domains\n");
> -		goto disable_irqs;
> +		goto disable_active_pds;
>  	}
> 
>  	ret = q6v5_regulator_enable(qproc, qproc->proxy_regs,
> @@ -839,6 +848,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  			       qproc->proxy_reg_count);
>  disable_proxy_pds:
>  	q6v5_pds_disable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
> +disable_active_pds:
> +	q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count);
>  disable_irqs:
>  	qcom_q6v5_unprepare(&qproc->q6v5);
> 
> @@ -878,6 +889,7 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
>  			 qproc->active_clk_count);
>  	q6v5_regulator_disable(qproc, qproc->active_regs,
>  			       qproc->active_reg_count);
> +	q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count);
> 
>  	/* In case of failure or coredump scenario where reclaiming MBA 
> memory
>  	 * could not happen reclaim it here.
> @@ -1410,11 +1422,19 @@ static int q6v5_probe(struct platform_device 
> *pdev)
>  	}
>  	qproc->active_reg_count = ret;
> 
> +	ret = q6v5_pds_attach(&pdev->dev, qproc->active_pds,
> +			      desc->active_pd_names);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Failed to attach active power domains\n");
> +		goto free_rproc;
> +	}
> +	qproc->active_pd_count = ret;
> +
>  	ret = q6v5_pds_attach(&pdev->dev, qproc->proxy_pds,
>  			      desc->proxy_pd_names);
>  	if (ret < 0) {
>  		dev_err(&pdev->dev, "Failed to init power domains\n");
> -		goto free_rproc;
> +		goto detach_active_pds;
>  	}
>  	qproc->proxy_pd_count = ret;
> 
> @@ -1446,6 +1466,8 @@ static int q6v5_probe(struct platform_device 
> *pdev)
> 
>  detach_proxy_pds:
>  	q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
> +detach_active_pds:
> +	q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
>  free_rproc:
>  	rproc_free(rproc);
> 
> @@ -1463,6 +1485,7 @@ static int q6v5_remove(struct platform_device 
> *pdev)
>  	qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev);
>  	qcom_remove_ssr_subdev(qproc->rproc, &qproc->ssr_subdev);
> 
> +	q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
>  	q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
> 
>  	rproc_free(qproc->rproc);
> @@ -1489,6 +1512,10 @@ static const struct rproc_hexagon_res sdm845_mss 
> = {
>  			"mnoc_axi",
>  			NULL
>  	},
> +	.active_pd_names = (char*[]){
> +			"load_state",
> +			NULL
> +	},
>  	.proxy_pd_names = (char*[]){
>  			"cx",
>  			"mx",

-- 
-- Sibi Sankar --
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

  reply	other threads:[~2019-01-09 14:40 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-06  8:09 [PATCH v2 0/7] Qualcomm AOSS QMP side channel binding and driver Bjorn Andersson
2019-01-06  8:09 ` [PATCH v2 1/7] dt-bindings: soc: qcom: Add AOSS QMP binding Bjorn Andersson
2019-01-11 22:10   ` Rob Herring
2019-01-14 22:30   ` Stephen Boyd
2019-01-06  8:09 ` [PATCH v2 2/7] soc: qcom: Add AOSS QMP communication driver Bjorn Andersson
2019-01-10 12:48   ` Arun Kumar Neelakantam
2019-01-14 22:36   ` Stephen Boyd
2019-01-14 23:20     ` Bjorn Andersson
2019-01-06  8:09 ` [PATCH v2 3/7] soc: qcom: Add AOSS QMP genpd provider Bjorn Andersson
2019-01-10  4:59   ` Sai Prakash Ranjan
2019-01-14 22:40   ` Stephen Boyd
2019-01-14 23:29     ` Bjorn Andersson
2019-01-06  8:09 ` [PATCH v2 4/7] remoteproc: q6v5-mss: Vote for rpmh power domains Bjorn Andersson
2019-01-09 14:39   ` Sibi Sankar
2019-01-06  8:09 ` [PATCH v2 5/7] remoteproc: q6v5-mss: Active powerdomain for SDM845 Bjorn Andersson
2019-01-09 14:40   ` Sibi Sankar [this message]
2019-01-06  8:09 ` [PATCH v2 6/7] amba: Allow pclk to be controlled by power domain Bjorn Andersson
2019-01-06  8:09 ` [(RFC) PATCH v2 7/7] soc: qcom: aoss-qmp: Add cooling device support Bjorn Andersson
2019-01-11 22:11   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=df33fe44c56424ca1d5865c972e0034e@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=aneela@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel-owner@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).