From: Wesley Cheng <wcheng@codeaurora.org>
To: Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Wesley Cheng <quic_wcheng@quicinc.com>,
Jung Daehwan <dh10.jung@samsung.com>
Cc: Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
"quic_jackp@quicinc.com" <quic_jackp@quicinc.com>
Subject: Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
Date: Mon, 28 Feb 2022 14:53:33 -0800 [thread overview]
Message-ID: <e165c644-4ad0-b103-4f8b-2d3bc1b211f1@codeaurora.org> (raw)
In-Reply-To: <4371e407-7791-b0b5-dc8c-ad0be09acba4@synopsys.com>
[-- Attachment #1: Type: text/plain, Size: 8226 bytes --]
Hi Thinh,
On 2/24/2022 5:44 PM, Thinh Nguyen wrote:
> Wesley Cheng wrote:
>> Hi Thinh,
>>
>> On 2/24/2022 5:26 PM, Thinh Nguyen wrote:
>>> Hi Wesley,
>>>
>>> Wesley Cheng wrote:
>>>> Hi Thinh,
>>>>
>>>> On 2/22/2022 6:59 PM, Thinh Nguyen wrote:
>>>>> Hi Wesley,
>>>>>
>>>
>>> <snip>
>>>
>>>>>
>>>>> Can you provide a full trace?
>>>>>
>>>> Sorry for doing this, but we didn't have a way to share the file
>>>> directly, so I have to paste the trace below. :/
>>>>
>>>>> Btw, when you experiment with increasing the timeout to 10 seconds, did
>>>>> you use the mdelay() in each loop? The delta time for End Transfer
>>>>> timeout here seems very small.
>>>>>
>>>> This particular run did not modify the timeout for the cmd status polling.
>>>>
>>>> Is that something that you want to try? Not pertaining to this dequeue
>>>> situation, during the pullup disable path debug, I noticed that as long
>>>> as there was a pending EP0 SETUP packet (not data/status) cached in the
>>>> controller, it would also have endxfer timeouts on non-control EPs. We
>>>> were able to capture a bus sniffer log + ftrace, and it showed that at
>>>> the point of the error, the lecroy/bus log saw a SETUP token ACK'ed,
>>>> while on the ftrace, there were endxfer timeouts for all non-control EPs
>>>> (due to the dwc3_gadget_stop_active_transfers() call)
>>>>
>>>> Thanks
>>>> Wesley
>>>>
>>>> TRACE
>>>> ---------------------------------------------------------------------
>>>>
>>>
>>> <snip>
>>>
>>>> [ 1023.912550050 0x4af666fd2] dbg_trace_log_ctrl: Clear Endpoint
>>>> Feature(Halt ep4in)
>>>> [ 1023.912934738 0x4af668cab] dbg_send_ep_cmd: ep0out: cmd 'Set
>>>> Stall' [404] params 00000000 00000000 00000000 --> status: Successful
>>>> [ 1023.913361561 0x4af66acae] dbg_send_ep_cmd: ep0out: cmd
>>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>>> Successful
>>>> [ 1024.336480573 0x4afe2a29b] dbg_trace_log_ctrl: Clear Endpoint
>>>> Feature(Halt ep5in)
>>>> [ 1024.336855573 0x4afe2bebc] dbg_send_ep_cmd: ep5in: cmd 'Clear
>>>> Stall' [405] params 00000000 00000000 00000000 --> status: Successful
>>>> [ 1024.337264531 0x4afe2dd68] dbg_send_ep_cmd: ep0in: cmd 'Start
>>>> Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
>>>> [ 1024.351910156 0x4afe727d4] dbg_send_ep_cmd: ep0out: cmd
>>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>>> Successful
>>>> [ 1024.363139896 0x4afea720f] dbg_trace_log_ctrl: Clear Endpoint
>>>> Feature(Halt ep4in)
>>>> [ 1024.363898281 0x4afeaaaf0] dbg_send_ep_cmd: ep0out: cmd 'Set
>>>> Stall' [404] params 00000000 00000000 00000000 --> status: Successful
>>>> [ 1024.364734010 0x4afeae99e] dbg_send_ep_cmd: ep0out: cmd
>>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>>> Successful
>>>> [ 1024.776173803 0x4b063739a] dbg_trace_log_ctrl: Clear Endpoint
>>>> Feature(Halt ep5in)
>>>> [ 1024.776907188 0x4b063aa9b] dbg_send_ep_cmd: ep5in: cmd 'Clear
>>>> Stall' [405] params 00000000 00000000 00000000 --> status: Successful
>>>> [ 1024.777646147 0x4b063e208] dbg_send_ep_cmd: ep0in: cmd 'Start
>>>> Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
>>>> [ 1024.788641980 0x4b0671ab8] dbg_send_ep_cmd: ep0out: cmd
>>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>>> Successful
>>>> [ 1024.799682397 0x4b06a56bf] dbg_trace_log_ctrl: Clear Endpoint
>>>> Feature(Halt ep4in)
>>>> [ 1024.800442605 0x4b06a8fc3] dbg_send_ep_cmd: ep0out: cmd 'Set
>>>> Stall' [404] params 00000000 00000000 00000000 --> status: Successful
>>>> [ 1024.801184584 0x4b06ac769] dbg_send_ep_cmd: ep0out: cmd
>>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>>> Successful
>>>> [ 1025.222173752 0x4b0e61d99] dbg_trace_log_ctrl: Clear Endpoint
>>>> Feature(Halt ep5in)
>>>> [ 1025.222991669 0x4b0e65af1] dbg_send_ep_cmd: ep5in: cmd 'Clear
>>>> Stall' [405] params 00000000 00000000 00000000 --> status: Successful
>>>> [ 1025.223850731 0x4b0e69b5f] dbg_send_ep_cmd: ep0in: cmd 'Start
>>>> Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
>>>> [ 1025.239023492 0x4b0eb0d54] dbg_send_ep_cmd: ep0out: cmd
>>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>>> Successful
>>>> [ 1025.248963179 0x4b0edf6ce] dbg_trace_log_ctrl: Clear Endpoint
>>>> Feature(Halt ep4in)
>>>> [ 1025.249709846 0x4b0ee2ecd] dbg_send_ep_cmd: ep0out: cmd 'Set
>>>> Stall' [404] params 00000000 00000000 00000000 --> status: Successful
>>>> [ 1025.250533440 0x4b0ee6c93] dbg_send_ep_cmd: ep0out: cmd
>>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>>> Successful
>>>> [ 1025.667084535 0x4b16875e7] dbg_trace_log_ctrl: Clear Endpoint
>>>> Feature(Halt ep5in)
>>>> [ 1025.667827764 0x4b168ada6] dbg_send_ep_cmd: ep5in: cmd 'Clear
>>>> Stall' [405] params 00000000 00000000 00000000 --> status: Successful
>>>> [ 1025.668635993 0x4b168ea44] dbg_send_ep_cmd: ep0in: cmd 'Start
>>>> Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
>>>> [ 1025.674777764 0x4b16ab6e7] dbg_send_ep_cmd: ep0out: cmd
>>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>>> Successful
>>>> [ 1025.684733597 0x4b16da197] dbg_trace_log_ctrl: Clear Endpoint
>>>> Feature(Halt ep4in)
>>>> [ 1025.685336150 0x4b16dcec7] dbg_send_ep_cmd: ep0out: cmd 'Set
>>>> Stall' [404] params 00000000 00000000 00000000 --> status: Successful
>>>> [ 1025.686112608 0x4b16e0904] dbg_send_ep_cmd: ep0out: cmd
>>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status:
>>>> Successful
>>>> [ 1025.698842347 0x4b171c3bf] dbg_send_ep_cmd: ep0out: cmd 'Set
>>>> Stall' [404] params 00000000 00000000 00000000 --> status: Successful
>>>> [ 1026.444051569 0x4b24c1670] dbg_send_ep_cmd: ep0out: cmd
>>>> 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: No
>>>> Resource
>>>
>>> Why did this fail with No Resource? Was it sent before the control TRB
>>> completion?
>>>
>>>> [ 1027.225705425 0x4b3311678] dbg_trace_log_ctrl: Clear Endpoint
>>>> Feature(Halt ep5in)
>>>> [ 1027.225820165 0x4b3311f14] dbg_send_ep_cmd: ep5in: cmd 'Clear
>>>> Stall' [405] params 00000000 00000000 00000000 --> status: Successful
>>>> [ 1027.225931467 0x4b331276c] dbg_send_ep_cmd: ep0in: cmd 'Start
>>>> Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
>>>> [ 1027.234311467 0x4b3339bed] dbg_ep_dequeue: ep7in: req
>>>> ffffff87f99b8f00 length 0/61696 zsI ==> -115
>>>> [ 1027.247409123 0x4b337723f] dbg_send_ep_cmd: ep7in: cmd 'End
>>>> Transfer' [f0d08] params 00000000 00000000 00000000 --> status: Timed Out
>>>>
>>>
>>> If the Start Transfer for ep0 failed and the Setup packet can't be
>>> DMA'ed out, the End Transfer may not go through.
>>>
>>> Can you leave the log unfiltered and is it possible to send as
>>> attachment? It's missing some important info in this log.
>>>
>> Are there any specific logs you were looking for?
>> trace_dwc3_event
>> trace_dwc3_prepare_trb
>>
>> Part of reproducing this issue will not allow me to enable tracing, so I
>> have to make changes in our driver to reroute the logs elsewhere. So
>> far I've added changes to do:
>> trace_dwc3_ctrl_req
>> trace_dwc3_ep_queue
>> trace_dwc3_ep_dequeue
>> trace_dwc3_gadget_giveback
>> trace_dwc3_gadget_ep_cmd
>>
>> I can add the above 2 tracepoints as well, but wondering if you needed
>> anything else.
>>
>
> If possible, please have these in addition to the above.
>
> trace_dwc3_event
> trace_dwc3_complete_trb
>
Enabled the traces you recommended. I think it captures it pretty clear
where the status phase was still in progress when the dequeue came in,
which led to the end transfer timeout. Let me know if you need another log.
Thanks
Wesley Cheng
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
[-- Attachment #2: a600000.ssusb.trace.txt --]
[-- Type: text/plain, Size: 166323 bytes --]
[ 2177.434224353 0x9d7c21675] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.434344457 0x9d7c21f77] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.434768311 0x9d7c23f41] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.435050551 0x9d7c2546b] dbg_ep_queue: ep2in: req ffffff80341bdb00 length 0/65536 zsI ==> -115
[ 2177.435159040 0x9d7c25c8e] dbg_prepare: ep2in: trb ffffffc01df9dc10 (E194:D0) buf 00000000ee3c0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.435327269 0x9d7c2692c] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.435460446 0x9d7c2732a] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2177.435904978 0x9d7c29481] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.436264405 0x9d7c2af75] dbg_ep_queue: ep2in: req ffffff80341bce00 length 0/65536 zsI ==> -115
[ 2177.436373780 0x9d7c2b7a9] dbg_prepare: ep2in: trb ffffffc01df9dc20 (E195:D0) buf 00000000ec770000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.436548988 0x9d7c2c4cd] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.437105342 0x9d7c2ee87] dbg_ep_queue: ep2in: req ffffff87ca2adb00 length 0/65536 zsI ==> -115
[ 2177.437219613 0x9d7c2f719] dbg_prepare: ep2in: trb ffffffc01df9dc30 (E196:D0) buf 00000000ec760000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.437382269 0x9d7c3034d] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.437510863 0x9d7c30cf2] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.437748988 0x9d7c31ece] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 16)
[ 2177.437992217 0x9d7c3310b] dbg_ep_queue: ep2in: req ffffff87ca2ac100 length 0/65536 zsI ==> -115
[ 2177.438100186 0x9d7c33924] dbg_prepare: ep2in: trb ffffffc01df9dc40 (E197:D0) buf 00000000ec750000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.438262321 0x9d7c3454d] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.438639405 0x9d7c36196] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.438909353 0x9d7c375d5] dbg_ep_queue: ep2in: req ffffff87ca2ad500 length 0/65536 zsI ==> -115
[ 2177.439005342 0x9d7c37d07] dbg_prepare: ep2in: trb ffffffc01df9dc50 (E198:D0) buf 00000000e9d50000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.439158624 0x9d7c38886] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.439287113 0x9d7c3922a] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.440605342 0x9d7c3f507] dbg_ep_queue: ep2in: req ffffff87ca2ad100 length 0/65536 zsI ==> -115
[ 2177.440707217 0x9d7c3fcab] dbg_prepare: ep2in: trb ffffffc01df9dc60 (E199:D0) buf 00000000ef980000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.440867790 0x9d7c408b6] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.440987217 0x9d7c411ac] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2177.441387530 0x9d7c42fb1] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 16/16 zsI ==> 0
[ 2177.441588155 0x9d7c43ebd] dbg_ep_queue: ep2in: req ffffff87ca2ac500 length 0/65536 zsI ==> -115
[ 2177.441699197 0x9d7c44711] dbg_prepare: ep2in: trb ffffffc01df9dc70 (E200:D0) buf 00000000ecdd0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.441869665 0x9d7c453da] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.442348207 0x9d7c477bf] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.442699874 0x9d7c4921e] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.442949978 0x9d7c4a4e0] dbg_ep_queue: ep2in: req ffffff87ca2ad300 length 0/65536 zsI ==> -115
[ 2177.443047582 0x9d7c4ac32] dbg_prepare: ep2in: trb ffffffc01df9dc80 (E201:D0) buf 00000000ec730000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.443221124 0x9d7c4b936] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.443355238 0x9d7c4c346] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2177.443769874 0x9d7c4e25f] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.444223363 0x9d7c50461] dbg_ep_queue: ep2in: req ffffff87ca2aca00 length 0/65536 zsI ==> -115
[ 2177.444331228 0x9d7c50c79] dbg_prepare: ep2in: trb ffffffc01df9dc90 (E202:D0) buf 00000000ec720000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.444501436 0x9d7c5193c] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.445027009 0x9d7c540a8] dbg_ep_queue: ep2in: req ffffff87ca2ad900 length 0/65536 zsI ==> -115
[ 2177.445139040 0x9d7c5490e] dbg_prepare: ep2in: trb ffffffc01df9dca0 (E203:D0) buf 00000000ee760000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.445314613 0x9d7c55639] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.445911019 0x9d7c582f5] dbg_ep_queue: ep2in: req ffffff87ca2ad700 length 0/65536 zsI ==> -115
[ 2177.446018155 0x9d7c58afd] dbg_prepare: ep2in: trb ffffffc01df9dcb0 (E204:D0) buf 00000000ee750000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.446177269 0x9d7c596ec] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.446690342 0x9d7c5bd67] dbg_ep_queue: ep2in: req ffffff87ca2adf00 length 0/65536 zsI ==> -115
[ 2177.446799874 0x9d7c5c59e] dbg_prepare: ep2in: trb ffffffc01df9dcc0 (E205:D0) buf 00000000ee740000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.446969249 0x9d7c5d252] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.448192999 0x9d7c62e1a] dbg_ep_queue: ep2in: req ffffff87ca2ac900 length 0/65536 zsI ==> -115
[ 2177.448307634 0x9d7c636b3] dbg_prepare: ep2in: trb ffffffc01df9dcd0 (E206:D0) buf 00000000e9a50000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.448480186 0x9d7c643a4] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.449009092 0x9d7c66b4f] dbg_ep_queue: ep2in: req ffffff87ca2acd00 length 0/65536 zsI ==> -115
[ 2177.449131228 0x9d7c67478] dbg_prepare: ep2in: trb ffffffc01df9dce0 (E207:D0) buf 00000000e9a40000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.449302530 0x9d7c68152] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.449847113 0x9d7c6aa29] dbg_ep_queue: ep2in: req ffffff87ca2ac600 length 0/65536 zsI ==> -115
[ 2177.449961488 0x9d7c6b2bd] dbg_prepare: ep2in: trb ffffffc01df9dcf0 (E208:D0) buf 00000000e9850000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.450127530 0x9d7c6bf31] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.450651801 0x9d7c6e683] dbg_ep_queue: ep2in: req ffffff87ca2ad000 length 0/65536 zsI ==> -115
[ 2177.450766749 0x9d7c6ef22] dbg_prepare: ep2in: trb ffffffc01df9dd00 (E209:D0) buf 00000000e9840000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.450932165 0x9d7c6fb8a] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.452027530 0x9d7c74db1] dbg_ep_queue: ep2in: req ffffff87ca2ac300 length 0/65536 zsI ==> -115
[ 2177.452125603 0x9d7c7550c] dbg_prepare: ep2in: trb ffffffc01df9dd10 (E210:D0) buf 00000000ef650000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.452278624 0x9d7c76086] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.452823780 0x9d7c78969] dbg_ep_queue: ep2in: req ffffff87ca2ac700 length 0/65536 zsI ==> -115
[ 2177.452936019 0x9d7c791d4] dbg_prepare: ep2in: trb ffffffc01df9dd20 (E211:D0) buf 00000000eac50000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.453105915 0x9d7c79e92] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.453615186 0x9d7c7c4c5] dbg_ep_queue: ep2in: req ffffff87ca2adc00 length 0/65536 zsI ==> -115
[ 2177.453716697 0x9d7c7cc61] dbg_prepare: ep2in: trb ffffffc01df9dd30 (E212:D0) buf 00000000e9800000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.453873572 0x9d7c7d825] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.454374040 0x9d7c7fdae] dbg_ep_queue: ep2in: req ffffff87ca2add00 length 0/65536 zsI ==> -115
[ 2177.454479509 0x9d7c80597] dbg_prepare: ep2in: trb ffffffc01df9dd40 (E213:D0) buf 00000000e9810000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.454651749 0x9d7c81282] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.455185394 0x9d7c83a89] dbg_ep_queue: ep2in: req ffffff87ca2acb00 length 0/65536 zsI ==> -115
[ 2177.455301488 0x9d7c8433d] dbg_prepare: ep2in: trb ffffffc01df9dd50 (E214:D0) buf 00000000e9820000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.455472582 0x9d7c85012] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.456787061 0x9d7c8b2a8] dbg_ep_queue: ep2in: req ffffff87ca2ace00 length 0/65536 zsI ==> -115
[ 2177.456919197 0x9d7c8bc92] dbg_prepare: ep2in: trb ffffffc01df9dd60 (E215:D0) buf 00000000edfb0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.457079457 0x9d7c8c896] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.457614457 0x9d7c8f0b6] dbg_ep_queue: ep2in: req ffffff87ca2ad400 length 0/65536 zsI ==> -115
[ 2177.457716019 0x9d7c8f854] dbg_prepare: ep2in: trb ffffffc01df9dd70 (E216:D0) buf 00000000eb390000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.457875915 0x9d7c90452] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.458364769 0x9d7c928fc] dbg_ep_queue: ep2in: req ffffff87ca2acc00 length 0/65536 zsI ==> -115
[ 2177.458467947 0x9d7c930b9] dbg_prepare: ep2in: trb ffffffc01df9dd80 (E217:D0) buf 00000000eadd0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.458616644 0x9d7c93be0] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.459094249 0x9d7c95fb2] dbg_ep_queue: ep2in: req ffffff8866428c00 length 0/65536 zsI ==> -115
[ 2177.459206540 0x9d7c9681e] dbg_prepare: ep2in: trb ffffffc01df9dd90 (E218:D0) buf 00000000eade0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.459377478 0x9d7c974f0] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.460965186 0x9d7c9ec04] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2177.461082478 0x9d7c9f4d1] dbg_prepare: ep6in: trb ffffffc01e7f5020 (E3:D2) buf 00000000ed87f000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.461259144 0x9d7ca0211] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.472367842 0x9d7cd4337] dbg_ep_queue: ep2in: req ffffff8041a1a800 length 0/65536 zsI ==> -115
[ 2177.472479457 0x9d7cd4b96] dbg_prepare: ep2in: trb ffffffc01df9dda0 (E219:D0) buf 00000000ec4d0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.472640811 0x9d7cd57b0] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.473087738 0x9d7cd7935] dbg_ep_queue: ep2in: req ffffff8041a1b600 length 0/65536 zsI ==> -115
[ 2177.473214978 0x9d7cd82c0] dbg_prepare: ep2in: trb ffffffc01df9ddb0 (E220:D0) buf 00000000ebec0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.473378988 0x9d7cd8f0d] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.473904509 0x9d7cdb678] dbg_ep_queue: ep2in: req ffffff8041a1af00 length 0/65536 zsI ==> -115
[ 2177.474010447 0x9d7cdbe69] dbg_prepare: ep2in: trb ffffffc01df9ddc0 (E221:D0) buf 00000000efd80000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.474163936 0x9d7cdc9ec] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.474294145 0x9d7cdd3b1] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2177.474527061 0x9d7cde529] dbg_complete: ep6in: trb ffffffc01e7f5020 (E3:D3) buf 00000000ed87f000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2177.474838832 0x9d7cdfc8b] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2177.475043207 0x9d7ce0bde] dbg_ep_queue: ep2in: req ffffff87827afc00 length 0/65536 zsI ==> -115
[ 2177.475149509 0x9d7ce13d7] dbg_prepare: ep2in: trb ffffffc01df9ddd0 (E222:D0) buf 00000000ecee0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.475303155 0x9d7ce1f5e] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.475936749 0x9d7ce4ee2] dbg_ep_queue: ep2in: req ffffff80416baf00 length 0/65536 zsI ==> -115
[ 2177.476036645 0x9d7ce5660] dbg_prepare: ep2in: trb ffffffc01df9dde0 (E223:D0) buf 00000000ed310000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.476166592 0x9d7ce601f] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.476663572 0x9d7ce8565] dbg_ep_queue: ep2in: req ffffff879af6d500 length 0/65536 zsI ==> -115
[ 2177.476765759 0x9d7ce8d0f] dbg_prepare: ep2in: trb ffffffc01df9ddf0 (E224:D0) buf 00000000ecbd0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.476922686 0x9d7ce98d4] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.477055707 0x9d7cea2cf] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.477254613 0x9d7ceb1ba] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2177.477457113 0x9d7cec0e9] dbg_ep_queue: ep2in: req ffffff8041706e00 length 0/65536 zsI ==> -115
[ 2177.477576228 0x9d7cec9d8] dbg_prepare: ep2in: trb ffffffc01df9de00 (E225:D0) buf 00000000e95e0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.477742999 0x9d7ced65a] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.478118520 0x9d7cef285] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.478383988 0x9d7cf066d] dbg_ep_queue: ep2in: req ffffff803ae09d00 length 0/65536 zsI ==> -115
[ 2177.478488311 0x9d7cf0e40] dbg_prepare: ep2in: trb ffffffc01df9de10 (E226:D0) buf 00000000eb130000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.478623988 0x9d7cf186d] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.478748988 0x9d7cf21ce] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.479138363 0x9d7cf3f02] dbg_ep_queue: ep2in: req ffffff803ae09b00 length 0/65536 zsI ==> -115
[ 2177.479241384 0x9d7cf46bb] dbg_prepare: ep2in: trb ffffffc01df9de20 (E227:D0) buf 00000000ee650000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.479398884 0x9d7cf528b] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.479534717 0x9d7cf5cbc] event (000090c2): ep0in: Transfer Not Ready [0] (Active) [Data Phase]
[ 2177.479740655 0x9d7cf6c2e] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2177.480097478 0x9d7cf86f1] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2177.480528467 0x9d7cfa743] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.480946384 0x9d7cfc69b] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.482400395 0x9d7d033a9] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2177.482842061 0x9d7d054c8] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.484711540 0x9d7d0e0ff] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.484948259 0x9d7d0f2bf] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 77)
[ 2177.485617478 0x9d7d124f1] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.485972530 0x9d7d13f91] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.486251020 0x9d7d15474] dbg_ep_queue: ep2in: req ffffff803ae08100 length 0/65536 zsI ==> -115
[ 2177.486364665 0x9d7d15cfa] dbg_prepare: ep2in: trb ffffffc01df9de30 (E228:D0) buf 00000000ebcd0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.486533624 0x9d7d169a6] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.486665342 0x9d7d17388] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2177.487043832 0x9d7d18feb] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 77/77 zsI ==> 0
[ 2177.487234353 0x9d7d19e34] dbg_ep_queue: ep2in: req ffffff803216b300 length 0/65536 zsI ==> -115
[ 2177.487351645 0x9d7d1a700] dbg_prepare: ep2in: trb ffffffc01df9de40 (E229:D0) buf 00000000ef2e0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.487528467 0x9d7d1b443] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.488001853 0x9d7d1d7c5] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.488373207 0x9d7d1f39f] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.488678259 0x9d7d20a7f] dbg_ep_queue: ep2in: req ffffff803ad3f400 length 0/65536 zsI ==> -115
[ 2177.488787582 0x9d7d212b2] dbg_prepare: ep2in: trb ffffffc01df9de50 (E230:D0) buf 00000000ef2f0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.488955447 0x9d7d21f4a] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.489491176 0x9d7d24777] dbg_ep_queue: ep2in: req ffffff8862734a00 length 0/65536 zsI ==> -115
[ 2177.489598676 0x9d7d24f87] dbg_prepare: ep2in: trb ffffffc01df9de60 (E231:D0) buf 00000000ed180000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.489762270 0x9d7d25bcd] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.489886853 0x9d7d26525] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2177.490334457 0x9d7d286b7] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.490606592 0x9d7d29b1f] dbg_ep_queue: ep2in: req ffffff80419caf00 length 0/65536 zsI ==> -115
[ 2177.490694092 0x9d7d2a1af] dbg_prepare: ep2in: trb ffffffc01df9de70 (E232:D0) buf 00000000ecda0000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.490826020 0x9d7d2ab95] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.491331592 0x9d7d2d17f] dbg_ep_queue: ep2in: req ffffff803216be00 length 0/65536 zsI ==> -115
[ 2177.491433311 0x9d7d2d921] dbg_prepare: ep2in: trb ffffffc01df9de80 (E233:D0) buf 00000000ecd90000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.491590603 0x9d7d2e4ec] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.500287843 0x9d7d57137] dbg_ep_queue: ep2in: req ffffff8041aecc00 length 0/65536 zsI ==> -115
[ 2177.500401020 0x9d7d579b4] dbg_prepare: ep2in: trb ffffffc01df9de90 (E234:D0) buf 00000000ecd80000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.500574770 0x9d7d586bc] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.501096905 0x9d7d5ade5] dbg_ep_queue: ep2in: req ffffff8041aed200 length 0/65536 zsI ==> -115
[ 2177.501211020 0x9d7d5b674] dbg_prepare: ep2in: trb ffffffc01df9dea0 (E235:D0) buf 00000000ecd70000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.501372790 0x9d7d5c296] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.501891749 0x9d7d5e982] dbg_ep_queue: ep2in: req ffffff8041aed900 length 0/65536 zsI ==> -115
[ 2177.502005030 0x9d7d5f201] dbg_prepare: ep2in: trb ffffffc01df9deb0 (E236:D0) buf 00000000ecd60000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.502176905 0x9d7d5fee5] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.502723051 0x9d7d627db] dbg_ep_queue: ep2in: req ffffff87dff8e800 length 0/65536 zsI ==> -115
[ 2177.502855030 0x9d7d631c2] dbg_prepare: ep2in: trb ffffffc01df9dec0 (E237:D0) buf 00000000ec370000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.503012270 0x9d7d63d8c] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.504134249 0x9d7d691b2] dbg_ep_queue: ep2in: req ffffff87dff8ea00 length 0/65536 zsI ==> -115
[ 2177.504246176 0x9d7d69a17] dbg_prepare: ep2in: trb ffffffc01df9ded0 (E238:D0) buf 00000000ec360000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.504418832 0x9d7d6a70a] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.504957843 0x9d7d6cf77] dbg_ep_queue: ep2in: req ffffff87dff8ee00 length 0/65536 zsI ==> -115
[ 2177.505069613 0x9d7d6d7d9] dbg_prepare: ep2in: trb ffffffc01df9dee0 (E239:D0) buf 00000000ec350000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.505245134 0x9d7d6e503] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.505779145 0x9d7d70d10] dbg_ep_queue: ep2in: req ffffff87dff8fb00 length 0/65536 zsI ==> -115
[ 2177.505886749 0x9d7d71522] dbg_prepare: ep2in: trb ffffffc01df9def0 (E240:D0) buf 00000000ec340000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.506065968 0x9d7d72293] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.506642165 0x9d7d74dca] dbg_ep_queue: ep2in: req ffffff87dff8e700 length 0/65536 zsI ==> -115
[ 2177.506747165 0x9d7d755aa] dbg_prepare: ep2in: trb ffffffc01df9df00 (E241:D0) buf 00000000ead60000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.506906697 0x9d7d761a1] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.510103207 0x9d7d8515e] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2177.510207322 0x9d7d8592d] dbg_prepare: ep6in: trb ffffffc01e7f5030 (E4:D3) buf 00000000ece33000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.510351020 0x9d7d863f4] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.510487634 0x9d7d86e33] dbg_ep_queue: ep2in: req ffffff87dff8f200 length 0/65536 zsI ==> -115
[ 2177.510607113 0x9d7d87729] dbg_prepare: ep2in: trb ffffffc01df9df10 (E242:D0) buf 00000000ee410000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.510778363 0x9d7d88401] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.511320082 0x9d7d8aca2] dbg_ep_queue: ep2in: req ffffff87dff8fd00 length 0/65536 zsI ==> -115
[ 2177.511436176 0x9d7d8b557] dbg_prepare: ep2in: trb ffffffc01df9df20 (E243:D0) buf 00000000eba90000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.511616645 0x9d7d8c2e0] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.512883363 0x9d7d921e1] dbg_ep_queue: ep2in: req ffffff87dff8ff00 length 0/65536 zsI ==> -115
[ 2177.512999874 0x9d7d92a9f] dbg_prepare: ep2in: trb ffffffc01df9df30 (E244:D0) buf 00000000eba80000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.513166905 0x9d7d93725] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.513704874 0x9d7d95f7e] dbg_ep_queue: ep2in: req ffffff87dff8f100 length 0/65536 zsI ==> -115
[ 2177.513815968 0x9d7d967d3] dbg_prepare: ep2in: trb ffffffc01df9df40 (E245:D0) buf 00000000eba70000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.513981124 0x9d7d97436] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.514517999 0x9d7d99c7b] dbg_ep_queue: ep2in: req ffffff87dff8f900 length 0/65536 zsI ==> -115
[ 2177.514628363 0x9d7d9a4c2] dbg_prepare: ep2in: trb ffffffc01df9df50 (E246:D0) buf 00000000eba60000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.514800134 0x9d7d9b1a3] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.515045759 0x9d7d9c410] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2177.515279040 0x9d7d9d58f] dbg_complete: ep6in: trb ffffffc01e7f5030 (E4:D4) buf 00000000ece33000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2177.515566801 0x9d7d9eb24] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2177.515765030 0x9d7d9fa01] dbg_ep_queue: ep2in: req ffffff87dff8fe00 length 0/65536 zsI ==> -115
[ 2177.515878780 0x9d7da0289] dbg_prepare: ep2in: trb ffffffc01df9df60 (E247:D0) buf 00000000edb60000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.516028155 0x9d7da0dbd] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.516979457 0x9d7da5516] dbg_ep_queue: ep2in: req ffffff87dff8f300 length 0/65536 zsI ==> -115
[ 2177.517089457 0x9d7da5d57] dbg_prepare: ep2in: trb ffffffc01df9df70 (E248:D0) buf 00000000edb50000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.517259874 0x9d7da6a1e] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.517791540 0x9d7da91ff] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.518011905 0x9d7daa286] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2177.518702218 0x9d7dad64c] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.519022947 0x9d7daee5a] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.520268468 0x9d7db4bc3] dbg_ep_queue: ep2in: req ffffff87dff8f400 length 0/65536 zsI ==> -115
[ 2177.520375290 0x9d7db53c7] dbg_prepare: ep2in: trb ffffffc01df9df80 (E249:D0) buf 00000000edb40000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.520522738 0x9d7db5ed5] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.520665447 0x9d7db6989] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2177.521054249 0x9d7db86b3] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 91/91 ZsI ==> 0
[ 2177.521243207 0x9d7db94de] dbg_ep_queue: ep2in: req ffffff87dff8e100 length 0/65536 zsI ==> -115
[ 2177.521350447 0x9d7db9ce9] dbg_prepare: ep2in: trb ffffffc01df9df90 (E250:D0) buf 00000000edb30000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.521506801 0x9d7dba8a3] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.521636228 0x9d7dbb258] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.522001488 0x9d7dbcdbd] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.522253572 0x9d7dbe0a5] dbg_ep_queue: ep2in: req ffffff87dff8f600 length 0/65536 zsI ==> -115
[ 2177.522356020 0x9d7dbe854] dbg_prepare: ep2in: trb ffffffc01df9dfa0 (E251:D0) buf 00000000edb20000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.522521541 0x9d7dbf4be] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.522653520 0x9d7dbfea5] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2177.523048676 0x9d7dc1c48] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.523308936 0x9d7dc2fcc] dbg_ep_queue: ep2in: req ffffff87dff8f800 length 0/65536 zsI ==> -115
[ 2177.523416749 0x9d7dc37e2] dbg_prepare: ep2in: trb ffffffc01df9dfb0 (E252:D0) buf 00000000edb10000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.523593520 0x9d7dc4525] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.524820343 0x9d7dca128] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.525015707 0x9d7dcafcf] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 17)
[ 2177.525251697 0x9d7dcc181] dbg_ep_queue: ep2in: req ffffff87dff8e400 length 0/65536 zsI ==> -115
[ 2177.525368103 0x9d7dcca3c] dbg_prepare: ep2in: trb ffffffc01df9dfc0 (E253:D0) buf 00000000edb00000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.525519145 0x9d7dcd590] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.525894926 0x9d7dcf1bf] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.526160447 0x9d7dd05a9] dbg_ep_queue: ep2in: req ffffff87dff8e000 length 0/65536 zsI ==> -115
[ 2177.526266645 0x9d7dd0da0] dbg_prepare: ep2in: trb ffffffc01df9dfd0 (E254:D0) buf 00000000ece70000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.526411541 0x9d7dd187e] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.526537999 0x9d7dd21fa] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.526940030 0x9d7dd4021] dbg_ep_queue: ep2in: req ffffff87dff8e500 length 0/65536 zsI ==> -115
[ 2177.527057947 0x9d7dd48f9] dbg_prepare: ep2in: trb ffffffc01df9dfe0 (E0:D0) buf 00000000ee220000 size 65536 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.527212113 0x9d7dd5489] dbg_send_ep_cmd: ep2in: cmd 'Update Transfer' [50007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.527344457 0x9d7dd5e77] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.527579197 0x9d7dd7011] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2177.527954770 0x9d7dd8c3d] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 17/17 zsI ==> 0
[ 2177.528954926 0x9d7ddd740] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.529374093 0x9d7ddf6af] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.544573572 0x9d7e26aa6] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2177.545018832 0x9d7e28c0a] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.547260916 0x9d7e33432] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2177.547379978 0x9d7e33d20] dbg_prepare: ep6in: trb ffffffc01e7f5040 (E5:D4) buf 00000000ece34000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.547555134 0x9d7e34a44] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.550617530 0x9d7e42ff2] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2177.550839561 0x9d7e44099] dbg_complete: ep6in: trb ffffffc01e7f5040 (E5:D5) buf 00000000ece34000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2177.551186749 0x9d7e45aa3] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2177.552691749 0x9d7e4cb83] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.552915968 0x9d7e4dc54] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2177.553719405 0x9d7e51896] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.554073103 0x9d7e5331d] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.554674874 0x9d7e5603e] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2177.555052270 0x9d7e57c8c] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 28/28 ZsI ==> 0
[ 2177.555481697 0x9d7e59cc2] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.555855239 0x9d7e5b8c6] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.556915603 0x9d7e6084d] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2177.557353572 0x9d7e62925] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.557999041 0x9d7e6598f] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.558226072 0x9d7e66a96] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 17)
[ 2177.558875759 0x9d7e69b50] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.559209666 0x9d7e6b45a] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.560494041 0x9d7e714af] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2177.560899561 0x9d7e73319] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 17/17 zsI ==> 0
[ 2177.561842582 0x9d7e779d2] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.562271697 0x9d7e79a02] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.562910759 0x9d7e7c9f0] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2177.563365655 0x9d7e7ec0d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.579743364 0x9d7ecb861] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2177.579855239 0x9d7ecc0c5] dbg_prepare: ep6in: trb ffffffc01e7f5050 (E6:D5) buf 00000000ece36000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.580003468 0x9d7eccbe3] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.582745291 0x9d7ed9987] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2177.582973832 0x9d7edaaab] dbg_complete: ep6in: trb ffffffc01e7f5050 (E6:D6) buf 00000000ece36000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2177.583321124 0x9d7edc4b6] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2177.584672374 0x9d7ee2a0f] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.584878207 0x9d7ee397e] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2177.585475499 0x9d7ee664b] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.585740812 0x9d7ee7a31] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.586212687 0x9d7ee9d94] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2177.586555655 0x9d7eeb74e] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2177.586912530 0x9d7eed212] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.587263728 0x9d7eeec68] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.588683937 0x9d7ef56ed] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2177.589027009 0x9d7ef70a8] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.590132895 0x9d7efc399] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.590332062 0x9d7efd288] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 16)
[ 2177.590930864 0x9d7efff72] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.591270759 0x9d7f018f0] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.592411020 0x9d7f06e75] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2177.592895447 0x9d7f092cb] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 16/16 zsI ==> 0
[ 2177.593731228 0x9d7f0d179] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.594502374 0x9d7f10b4f] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.597296384 0x9d7f1dcdd] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2177.598143937 0x9d7f21c6e] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.687239562 0x9d80c3698] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2177.687368260 0x9d80c403f] dbg_prepare: ep6in: trb ffffffc01e7f5060 (E7:D6) buf 00000000e9162000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.687545760 0x9d80c4d90] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.693079979 0x9d80deca1] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2177.693298989 0x9d80dfd0e] dbg_complete: ep6in: trb ffffffc01e7f5060 (E7:D7) buf 00000000e9162000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2177.693610968 0x9d80e1474] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2177.693907531 0x9d80e2ab1] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.694052270 0x9d80e358d] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2177.694802479 0x9d80e6dd1] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.695131229 0x9d80e8679] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.696304197 0x9d80ede72] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2177.696694197 0x9d80efbb2] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2177.697071020 0x9d80f17f5] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.697467531 0x9d80f35b2] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.698072270 0x9d80f630d] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2177.698515395 0x9d80f8449] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.699105135 0x9d80fb084] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.699313104 0x9d80fc01d] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 16)
[ 2177.699716124 0x9d80fde57] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.700024718 0x9d80ff57c] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.701200864 0x9d8104db2] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2177.701585135 0x9d8106a84] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 16/16 zsI ==> 0
[ 2177.702974926 0x9d810d2c0] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.703379249 0x9d810f113] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.704709197 0x9d81154d2] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2177.705101229 0x9d8117238] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.742481020 0x9d81c65b4] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2177.742746229 0x9d81c7998] dbg_prepare: ep6in: trb ffffffc01e7f5070 (E8:D7) buf 00000000ece35000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.743111333 0x9d81c94fa] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.748669875 0x9d81e35e0] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2177.749013208 0x9d81e4f9f] dbg_complete: ep6in: trb ffffffc01e7f5070 (E8:D8) buf 00000000ece35000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2177.749549770 0x9d81e77de] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2177.750105916 0x9d81ea193] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.750491802 0x9d81ebe84] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2177.751673052 0x9d81f171b] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.752295708 0x9d81f45cf] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.754841072 0x9d82004b7] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2177.755592166 0x9d8203d0b] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2177.756338781 0x9d820750a] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.757088312 0x9d820ad40] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.761252114 0x9d821e58b] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2177.762073208 0x9d822231f] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.763305083 0x9d8227f82] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.763729302 0x9d8229f54] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 16)
[ 2177.764684927 0x9d822e700] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.765124875 0x9d82307fe] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.802013989 0x9d82dd6af] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2177.802693573 0x9d82e09a7] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 16/16 zsI ==> 0
[ 2177.804265656 0x9d82e7f8f] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.804876333 0x9d82ead5b] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.807012896 0x9d82f4d9a] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2177.807694614 0x9d82f80bb] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.873976802 0x9d842ebe3] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2177.874105344 0x9d842f588] dbg_prepare: ep6in: trb ffffffc01e7f5080 (E9:D8) buf 00000000ece37000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2177.874285292 0x9d8430307] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2177.878842375 0x9d84458cf] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2177.879081490 0x9d8446abd] dbg_complete: ep6in: trb ffffffc01e7f5080 (E9:D9) buf 00000000ece37000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2177.879456542 0x9d84486df] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2177.880889875 0x9d844f25f] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.881127010 0x9d8450427] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2177.881905760 0x9d8453e90] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.882238260 0x9d845577f] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.882835187 0x9d8458445] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2177.883221490 0x9d845a13e] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2177.883639927 0x9d845c0a0] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.884023052 0x9d845dd5c] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.885733052 0x9d8465d9c] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2177.886154927 0x9d8467d3f] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.886820917 0x9d846af33] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2177.887057167 0x9d846c0eb] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 16)
[ 2177.887713625 0x9d846f227] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.888040240 0x9d8470aa6] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2177.889212687 0x9d8476294] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2177.889588990 0x9d8477ece] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 16/16 zsI ==> 0
[ 2177.890079771 0x9d847a39d] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2177.890498156 0x9d847c2fe] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2177.891159146 0x9d847f491] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2177.891607115 0x9d8481629] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.011296646 0x9d86b26e0] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2178.011578729 0x9d86b3c08] dbg_prepare: ep6in: trb ffffffc01e7f5090 (E10:D9) buf 00000000ece38000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2178.011948417 0x9d86b57c3] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2178.017139407 0x9d86cdd17] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2178.017587740 0x9d86cfeb6] dbg_complete: ep6in: trb ffffffc01e7f5090 (E10:D10) buf 00000000ece38000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2178.018262844 0x9d86d3159] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2178.018942063 0x9d86d644a] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2178.019412167 0x9d86d878b] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2178.020708625 0x9d86de8c8] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.021143000 0x9d86e095b] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.023364250 0x9d86eaff3] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2178.024073365 0x9d86ee522] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2178.024871177 0x9d86f20f8] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2178.025678313 0x9d86f5d80] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.029983521 0x9d870a066] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2178.030748209 0x9d870d9c0] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.034080605 0x9d871d3ae] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2178.034526021 0x9d871f515] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 16)
[ 2178.035803625 0x9d87254e7] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.036391542 0x9d87280fe] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.041693938 0x9d8740eae] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2178.042475136 0x9d8744943] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 16/16 zsI ==> 0
[ 2178.044263157 0x9d874cf5f] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2178.045016073 0x9d87507d5] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.049757428 0x9d8766b71] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2178.050594615 0x9d876aa3a] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.088521490 0x9d881c6bd] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2178.088644198 0x9d881cff1] dbg_prepare: ep6in: trb ffffffc01e7f50a0 (E11:D10) buf 00000000ece39000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2178.088820657 0x9d881dd2d] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2178.090717584 0x9d8826b72] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2178.090946803 0x9d8827ca4] dbg_complete: ep6in: trb ffffffc01e7f50a0 (E11:D11) buf 00000000ece39000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2178.091304355 0x9d8829775] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2178.091647271 0x9d882b12c] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2178.091876126 0x9d882c257] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2178.092675032 0x9d882fe41] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.093028209 0x9d88318be] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.094426178 0x9d8838198] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2178.094825865 0x9d8839f92] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2178.095260501 0x9d883c02a] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2178.095700605 0x9d883e12d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.096915605 0x9d8843c4d] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2178.097342584 0x9d8845c52] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.098212584 0x9d8849d94] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2178.098654928 0x9d884bec0] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2178.099806230 0x9d885151a] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.100430553 0x9d88543ec] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.102949824 0x9d88600df] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2178.103758574 0x9d8863d87] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2178.106188886 0x9d886f3cd] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2178.107010344 0x9d8873167] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.109452740 0x9d887e896] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2178.110318105 0x9d888297d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.165934980 0x9d89874c0] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2178.166061386 0x9d8987e3b] dbg_prepare: ep6in: trb ffffffc01e7f50b0 (E12:D11) buf 00000000eb926000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2178.166242792 0x9d8988bd6] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2178.173619511 0x9d89ab518] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2178.173851647 0x9d89ac681] dbg_complete: ep6in: trb ffffffc01e7f50b0 (E12:D12) buf 00000000eb926000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2178.174219615 0x9d89ae21a] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2178.174574199 0x9d89afcb1] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2178.174810553 0x9d89b0e6c] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2178.175607376 0x9d89b4a2f] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.175928886 0x9d89b624b] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.177256230 0x9d89bc5d9] event (000090c2): ep0in: Transfer Not Ready [0] (Active) [Data Phase]
[ 2178.177487011 0x9d89bd728] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2178.177892949 0x9d89bf599] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 44/44 ZsI ==> 0
[ 2178.178325449 0x9d89c1609] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2178.178741126 0x9d89c3536] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.179384876 0x9d89c657f] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2178.179770970 0x9d89c8274] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.180932272 0x9d89cd98d] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2178.181171803 0x9d89ceb84] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2178.181845657 0x9d89d1e0e] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.182195240 0x9d89d3845] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.182829355 0x9d89d67d4] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2178.183238886 0x9d89d868b] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2178.184163053 0x9d89dcbdb] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2178.184585449 0x9d89deb8a] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.186271438 0x9d89e69fd] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2178.186683418 0x9d89e88e2] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.421354929 0x9d8e3493f] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2178.421516856 0x9d8e35564] dbg_prepare: ep6in: trb ffffffc01e7f50c0 (E13:D12) buf 00000000e8d79000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2178.421702689 0x9d8e36355] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2178.426440189 0x9d8e4c6a5] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2178.426669772 0x9d8e4d7dd] dbg_complete: ep6in: trb ffffffc01e7f50c0 (E13:D13) buf 00000000e8d79000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2178.427069564 0x9d8e4f5d9] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2178.428507325 0x9d8e561ae] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2178.428748575 0x9d8e573c6] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2178.429636752 0x9d8e5b662] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.429979772 0x9d8e5d01d] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.430618106 0x9d8e5fffd] event (000090c2): ep0in: Transfer Not Ready [0] (Active) [Data Phase]
[ 2178.430848262 0x9d8e6113f] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2178.431325293 0x9d8e63507] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 23/23 ZsI ==> 0
[ 2178.431726647 0x9d8e65320] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2178.432128522 0x9d8e67144] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.433496647 0x9d8e6d7e1] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2178.433942272 0x9d8e6f94d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.434610450 0x9d8e72b6a] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2178.434847950 0x9d8e73d3a] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2178.435594043 0x9d8e7752f] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.435913002 0x9d8e78d1a] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.437265814 0x9d8e7f291] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2178.437748366 0x9d8e816c1] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2178.438223522 0x9d8e83a64] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2178.438652012 0x9d8e85a88] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.442251595 0x9d8e96880] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2178.442704460 0x9d8e98a77] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.895288680 0x9d96e2247] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2178.895465763 0x9d96e2f8f] dbg_prepare: ep6in: trb ffffffc01e7f50d0 (E14:D13) buf 00000000ea15b000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2178.895641753 0x9d96e3cc3] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2178.898677899 0x9d96f2079] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2178.898905920 0x9d96f3193] dbg_complete: ep6in: trb ffffffc01e7f50d0 (E14:D14) buf 00000000ea15b000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2178.899335868 0x9d96f51d2] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2178.900587482 0x9d96fafb1] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2178.900827430 0x9d96fc1b0] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2178.902401649 0x9d97037c0] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.903011701 0x9d9706581] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.905570816 0x9d9712573] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2178.906447118 0x9d971672a] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2178.907226493 0x9d971a19d] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2178.907983941 0x9d971da6e] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.910571128 0x9d9729c78] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2178.911289149 0x9d972d251] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.914199201 0x9d973ac93] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2178.914635503 0x9d973cd4a] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2178.915948941 0x9d9742fcc] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.916517430 0x9d9745a70] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.919371024 0x9d9753076] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.919818628 0x9d9755207] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2178.920566076 0x9d9758a17] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2178.922439201 0x9d9761691] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2178.923240191 0x9d97652a5] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.926214461 0x9d97731b8] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2178.927049878 0x9d977705e] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.972047482 0x9d9849f30] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2178.972161128 0x9d984a7b7] dbg_prepare: ep6in: trb ffffffc01e7f50e0 (E15:D14) buf 00000000ec26d000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2178.972321805 0x9d984b3c3] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2178.974658368 0x9d9856302] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2178.974870503 0x9d98572ea] dbg_complete: ep6in: trb ffffffc01e7f50e0 (E15:D15) buf 00000000ec26d000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2178.975191128 0x9d9858af7] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2178.976508420 0x9d985edc3] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2178.976743628 0x9d985ff67] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2178.977490712 0x9d986376f] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.977811128 0x9d9864f77] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.978394670 0x9d9867b3a] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2178.978776597 0x9d98697df] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 87/87 ZsI ==> 0
[ 2178.979207535 0x9d986b832] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2178.979618420 0x9d986d703] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.980801753 0x9d9872fc3] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2178.981190660 0x9d9874ced] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.981758472 0x9d9877783] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2178.981960191 0x9d98786a5] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2178.982603055 0x9d987b6dc] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.982931180 0x9d987cf77] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.984106441 0x9d988279d] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2178.984344878 0x9d988397e] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2178.984735712 0x9d98856cf] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2178.985802795 0x9d988a6d7] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2178.986195347 0x9d988c447] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2178.986801597 0x9d988f1bf] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2178.987262222 0x9d989144b] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.082094566 0x9d9a4dcb8] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2179.082227795 0x9d9a4e6b6] dbg_prepare: ep6in: trb ffffffc01e7f50f0 (E16:D15) buf 00000000ea544000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2179.082402795 0x9d9a4f3d6] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2179.086855504 0x9d9a641cb] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2179.087082899 0x9d9a652d9] dbg_complete: ep6in: trb ffffffc01e7f50f0 (E16:D16) buf 00000000ea544000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2179.087456233 0x9d9a66ed8] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2179.088844410 0x9d9a6d6f6] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.089077431 0x9d9a6e870] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2179.089901910 0x9d9a72646] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.090255504 0x9d9a740cb] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.090873108 0x9d9a76f1c] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2179.091276077 0x9d9a78d55] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 28/28 ZsI ==> 0
[ 2179.091572379 0x9d9a7a38f] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.091944514 0x9d9a7bf77] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.093124618 0x9d9a817fa] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2179.093552327 0x9d9a8380d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.094218004 0x9d9a869fa] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.094445035 0x9d9a87b02] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2179.095083420 0x9d9a8aae2] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.095409774 0x9d9a8c35c] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.096697379 0x9d9a923ef] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.097105139 0x9d9a94284] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2179.098144514 0x9d9a99078] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.098555243 0x9d9a9af46] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.099212170 0x9d9a9e08b] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.099648681 0x9d9aa0148] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.123313420 0x9d9b0f022] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2179.123434462 0x9d9b0f936] dbg_prepare: ep6in: trb ffffffc01e7f5100 (E17:D16) buf 00000000ea52a000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2179.123602795 0x9d9b105d6] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2179.126697170 0x9d9b1edeb] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2179.126883525 0x9d9b1fbe4] dbg_complete: ep6in: trb ffffffc01e7f5100 (E17:D17) buf 00000000ea52a000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2179.127199150 0x9d9b21391] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2179.128635764 0x9d9b27f50] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.128854983 0x9d9b28fc0] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2179.129651233 0x9d9b2cb79] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.129988212 0x9d9b2e4bf] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.130586285 0x9d9b31199] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2179.130952795 0x9d9b32d16] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2179.131393264 0x9d9b34e20] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.131773420 0x9d9b36aa3] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.133132066 0x9d9b3d089] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2179.133515087 0x9d9b3ed43] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.134115660 0x9d9b41a4e] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.134344983 0x9d9b42b80] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2179.135005816 0x9d9b45d11] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.135346493 0x9d9b4769e] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.137082327 0x9d9b4f8ce] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.137474566 0x9d9b51639] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2179.138649306 0x9d9b56e54] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.139054358 0x9d9b58cb4] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.140815608 0x9d9b610cd] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.141265764 0x9d9b63290] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.181553837 0x9d9c2002b] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2179.181807275 0x9d9c2132d] dbg_prepare: ep6in: trb ffffffc01e7f5110 (E18:D17) buf 00000000eceae000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2179.182172327 0x9d9c22e8d] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2179.188783733 0x9d9c41e69] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2179.189061441 0x9d9c4333c] dbg_complete: ep6in: trb ffffffc01e7f5110 (E18:D18) buf 00000000eceae000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2179.189628681 0x9d9c45dc8] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2179.190297171 0x9d9c48fea] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.190725035 0x9d9c4b001] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2179.192194566 0x9d9c51e39] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.192810816 0x9d9c54c70] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.197318108 0x9d9c69e7d] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2179.198084619 0x9d9c6d7f9] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 ZsI ==> 0
[ 2179.198933785 0x9d9c717a9] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.199760244 0x9d9c755a6] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.202243473 0x9d9c80fe4] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2179.203121598 0x9d9c851c0] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.206528577 0x9d9c95146] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.206863525 0x9d9c96a65] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 35)
[ 2179.207548160 0x9d9c99dbe] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.207901389 0x9d9c9b83c] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.209574514 0x9d9ca35b8] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.209806077 0x9d9ca4716] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.210191389 0x9d9ca63fc] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 35/35 zsI ==> 0
[ 2179.211227379 0x9d9cab1af] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.211624775 0x9d9cacf7d] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.213098108 0x9d9cb3dfd] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.213533108 0x9d9cb5e9c] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.234240556 0x9d9d16fab] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2179.234350296 0x9d9d177e6] dbg_prepare: ep6in: trb ffffffc01e7f5120 (E19:D18) buf 00000000e915a000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2179.234511337 0x9d9d183fa] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2179.241555556 0x9d9d3944b] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2179.241776025 0x9d9d3a4d5] dbg_complete: ep6in: trb ffffffc01e7f5120 (E19:D19) buf 00000000e915a000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2179.242122067 0x9d9d3bec9] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2179.242456598 0x9d9d3d7e0] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.242686129 0x9d9d3e917] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2179.243463265 0x9d9d42360] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.243763890 0x9d9d439ec] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.250744202 0x9d9d64572] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2179.251093629 0x9d9d65fa6] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 ZsI ==> 0
[ 2179.251496337 0x9d9d67ddb] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.251834410 0x9d9d69735] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.253078525 0x9d9d6f485] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2179.253521390 0x9d9d715bb] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.254185608 0x9d9d7478d] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.254418942 0x9d9d7590c] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 17)
[ 2179.255073212 0x9d9d78a1f] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.255389410 0x9d9d7a1d6] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.273034983 0x9d9dccd41] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.273445400 0x9d9dcec09] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 17/17 zsI ==> 0
[ 2179.274682900 0x9d9dd48d9] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.275108004 0x9d9dd68bb] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.276691754 0x9d9dddf83] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.277139879 0x9d9de011f] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.277791025 0x9d9de31f5] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.278020817 0x9d9de4330] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 17)
[ 2179.278683942 0x9d9de74ed] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.279020556 0x9d9de8e2c] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.280183265 0x9d9dee560] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.280579202 0x9d9df0312] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 17/17 zsI ==> 0
[ 2179.281080192 0x9d9df28a5] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.281488942 0x9d9df474d] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.282140504 0x9d9df782b] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.282582275 0x9d9df994d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.283204879 0x9d9dfc7ff] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.283430869 0x9d9dfd8f3] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 16)
[ 2179.283988160 0x9d9e002be] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.284277848 0x9d9e01878] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.286109567 0x9d9e0a1d9] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.286512171 0x9d9e0c00b] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 16/16 zsI ==> 0
[ 2179.287012640 0x9d9e0e593] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.287417796 0x9d9e103f7] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.289254515 0x9d9e18db8] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.289682171 0x9d9e1adca] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.397923369 0x9da0163e2] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2179.398054202 0x9da016db1] dbg_prepare: ep6in: trb ffffffc01e7f5130 (E20:D19) buf 00000000ece31000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2179.398230400 0x9da017ae9] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2179.402889411 0x9da02d856] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2179.403111702 0x9da02e902] dbg_complete: ep6in: trb ffffffc01e7f5130 (E20:D20) buf 00000000ece31000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2179.403474880 0x9da03043e] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2179.403814150 0x9da031db1] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.404028369 0x9da032dc2] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2179.404838577 0x9da036a86] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.405173265 0x9da03839f] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.406658578 0x9da03f306] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2179.407045140 0x9da041003] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 ZsI ==> 0
[ 2179.407470348 0x9da042fe8] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.407879567 0x9da044e99] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.409216546 0x9da04b2df] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2179.409657223 0x9da04d3eb] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.448500036 0x9da103521] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2179.448622901 0x9da103e58] dbg_prepare: ep6in: trb ffffffc01e7f5140 (E21:D20) buf 00000000eb938000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2179.448793890 0x9da104b2b] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2179.450753213 0x9da10de1f] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2179.450973473 0x9da10eea4] dbg_complete: ep6in: trb ffffffc01e7f5140 (E21:D21) buf 00000000eb938000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2179.451337796 0x9da1109f7] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2179.452752380 0x9da11740f] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.452986598 0x9da1185a0] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2179.453803838 0x9da11c2eb] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.454138786 0x9da11dc09] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.454769776 0x9da120b5d] event (000090c2): ep0in: Transfer Not Ready [0] (Active) [Data Phase]
[ 2179.454994307 0x9da121c33] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2179.455386130 0x9da123997] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 ZsI ==> 0
[ 2179.455799932 0x9da1258a0] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.456179098 0x9da127510] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.457447067 0x9da12d429] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2179.457870348 0x9da12f3e7] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.677282953 0x9da533bd9] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2179.677566547 0x9da53511f] dbg_prepare: ep6in: trb ffffffc01e7f5150 (E22:D21) buf 00000000eb05f000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2179.677932068 0x9da536c88] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2179.685017068 0x9da557fea] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2179.685411339 0x9da559d7b] dbg_complete: ep6in: trb ffffffc01e7f5150 (E22:D22) buf 00000000eb05f000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2179.686114620 0x9da55d239] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2179.686760505 0x9da5602ac] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.687183891 0x9da56226b] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2179.688532901 0x9da568799] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.688989255 0x9da56a9d3] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.709930141 0x9da5ccc64] event (000090c2): ep0in: Transfer Not Ready [0] (Active) [Data Phase]
[ 2179.710163631 0x9da5cdde6] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2179.710558735 0x9da5cfb89] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2179.710981026 0x9da5d1b35] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.711390662 0x9da5d39ee] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.712945193 0x9da5dae85] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2179.713396703 0x9da5dd061] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.714011651 0x9da5dfe80] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.714246860 0x9da5e1025] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 35)
[ 2179.714912745 0x9da5e4215] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.715254828 0x9da5e5bbe] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.717017485 0x9da5edff1] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.717411703 0x9da5efd82] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 35/35 zsI ==> 0
[ 2179.717899881 0x9da5f221f] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.718317797 0x9da5f4176] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.718958526 0x9da5f7185] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.719394308 0x9da5f9234] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.810948683 0x9da7a64c7] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2179.811146495 0x9da7a739d] dbg_prepare: ep6in: trb ffffffc01e7f5160 (E23:D22) buf 00000000ea140000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2179.811348162 0x9da7a82bd] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2179.814834412 0x9da7b8836] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2179.815030193 0x9da7b96e4] dbg_complete: ep6in: trb ffffffc01e7f5160 (E23:D23) buf 00000000ea140000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2179.815419985 0x9da7bb420] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2179.817191600 0x9da7c3900] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.817425558 0x9da7c4a8c] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2179.818299204 0x9da7c8c11] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.818650298 0x9da7ca667] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.819238058 0x9da7cd27c] event (000090c2): ep0in: Transfer Not Ready [0] (Active) [Data Phase]
[ 2179.819456860 0x9da7ce2e5] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2179.819854673 0x9da7d00ba] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 ZsI ==> 0
[ 2179.820195454 0x9da7d1a4a] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.820547954 0x9da7d34ba] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.821690662 0x9da7d8a6e] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2179.822098475 0x9da7da904] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.822670558 0x9da7dd3eb] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.822880818 0x9da7de3b1] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 17)
[ 2179.823589881 0x9da7e18df] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.823912798 0x9da7e3117] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.825351548 0x9da7e9cff] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.825830089 0x9da7ec0e3] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 17/17 zsI ==> 0
[ 2179.826327173 0x9da7ee62a] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.826734204 0x9da7f04b1] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.827365714 0x9da7f340f] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.827776287 0x9da7f52da] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.829134985 0x9da7fb8c1] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.829375506 0x9da7fcaca] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 17)
[ 2179.830115037 0x9da800242] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.830579620 0x9da80251a] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.834008631 0x9da812648] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.834887641 0x9da816835] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 17/17 zsI ==> 0
[ 2179.835852954 0x9da81b099] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.836491339 0x9da81e07b] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.841437641 0x9da835376] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.842283787 0x9da8392ea] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.844986756 0x9da845da4] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.845232798 0x9da847016] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 33)
[ 2179.846034725 0x9da84ac3c] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.846373735 0x9da84c5a9] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.847010714 0x9da84f570] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.847492068 0x9da851989] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 33/33 zsI ==> 0
[ 2179.847962329 0x9da853cce] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.848358891 0x9da855a8d] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.849760818 0x9da85c3b2] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.850208996 0x9da85e54d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.850857381 0x9da8615ef] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.851091912 0x9da862786] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2179.851829933 0x9da865ee1] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.852163683 0x9da8677e7] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.853493318 0x9da86dba2] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.853990714 0x9da8700ef] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2179.854825089 0x9da873f82] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.855622485 0x9da877b50] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.858622225 0x9da885c4d] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.859457850 0x9da889af8] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.861862277 0x9da894f4e] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.862127381 0x9da89632f] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2179.862871027 0x9da899af4] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.863216496 0x9da89b4dd] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.864502277 0x9da8a154d] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.864983423 0x9da8a3963] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2179.865514985 0x9da8a6140] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.865933423 0x9da8a80a2] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.866579412 0x9da8ab116] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.867026235 0x9da8ad299] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.868417798 0x9da8b3af7] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.868630871 0x9da8b4af2] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 33)
[ 2179.869249621 0x9da8b7959] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.869525662 0x9da8b8e0e] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.870053058 0x9da8bb59c] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.870471964 0x9da8bd506] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 33/33 zsI ==> 0
[ 2179.870965194 0x9da8bfa04] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.871375402 0x9da8c18c9] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.872709256 0x9da8c7cd3] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.873160610 0x9da8c9ead] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.873801339 0x9da8ccebb] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.874039673 0x9da8ce09b] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 24)
[ 2179.874719725 0x9da8d139b] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.875015662 0x9da8d29ce] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.876555402 0x9da8d9d49] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.877041548 0x9da8dc1bf] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 zsI ==> 0
[ 2179.877542433 0x9da8de74f] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.877949569 0x9da8e05d9] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.878557433 0x9da8e336f] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.878961444 0x9da8e51bc] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.880145350 0x9da8eaa88] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.880378475 0x9da8ebc03] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 21)
[ 2179.881114829 0x9da8ef33e] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.881454985 0x9da8f0cc0] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.882077641 0x9da8f3b73] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.882543319 0x9da8f5e60] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 21/21 zsI ==> 0
[ 2179.883048475 0x9da8f8443] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.883471860 0x9da8fa405] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.884761339 0x9da9004bb] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.885204621 0x9da9025fa] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.885842381 0x9da9055ce] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.886069673 0x9da9066db] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2179.886748110 0x9da9099bd] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.887082537 0x9da90b2d2] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.888190819 0x9da9105f1] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.888659881 0x9da91291f] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2179.889110871 0x9da914af2] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.889521391 0x9da9169bc] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.890117069 0x9da919669] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.890507746 0x9da91b3b5] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.891104725 0x9da91e07c] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.891332277 0x9da91f18d] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2179.891936964 0x9da921ee6] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.892199621 0x9da923299] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.893527694 0x9da929635] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2179.893982902 0x9da92b858] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2179.894470714 0x9da92dcef] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.894869516 0x9da92fad8] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.896207381 0x9da935f2f] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2179.896652277 0x9da93808c] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.921087329 0x9da9aa92d] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2179.921219621 0x9da9ab31a] dbg_prepare: ep6in: trb ffffffc01e7f5170 (E24:D23) buf 00000000e9146000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2179.921396027 0x9da9ac055] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2179.923314308 0x9da9b5034] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2179.923523787 0x9da9b5fe9] dbg_complete: ep6in: trb ffffffc01e7f5170 (E24:D24) buf 00000000e9146000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2179.923868944 0x9da9b79cd] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2179.925868787 0x9da9c0fca] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.926092642 0x9da9c2094] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2179.926862121 0x9da9c5a4a] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.927191912 0x9da9c7306] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.928397537 0x9da9ccd72] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2179.928797642 0x9da9ceb73] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 ZsI ==> 0
[ 2179.929213267 0x9da9d0a9f] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.929632329 0x9da9d2a0e] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.930280194 0x9da9d5aa4] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2179.930714256 0x9da9d7b32] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.964994517 0x9daa78637] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2179.965151392 0x9daa791fb] dbg_prepare: ep6in: trb ffffffc01e7f5180 (E25:D24) buf 00000000eae56000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2179.965326913 0x9daa79f25] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2179.966736913 0x9daa808e6] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2179.966955923 0x9daa81952] dbg_complete: ep6in: trb ffffffc01e7f5180 (E25:D25) buf 00000000eae56000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2179.967366652 0x9daa83820] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2179.967723371 0x9daa852e2] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2179.967949360 0x9daa863d5] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2179.968814933 0x9daa8a4bf] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.969132798 0x9daa8bc97] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2179.970433163 0x9daa91e1e] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2179.970899517 0x9daa94117] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 ZsI ==> 0
[ 2179.971306288 0x9daa95f9a] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2179.971703110 0x9daa97d5d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2179.973048006 0x9daa9e23b] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2179.973462225 0x9daaa014c] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.054100298 0x9dac1a126] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2180.054236027 0x9dac1ab55] dbg_prepare: ep6in: trb ffffffc01e7f5190 (E26:D25) buf 00000000e9159000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.054418007 0x9dac1b8fa] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.058660507 0x9dac2f72a] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2180.058886652 0x9dac30820] dbg_complete: ep6in: trb ffffffc01e7f5190 (E26:D26) buf 00000000e9159000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.059254569 0x9dac323b9] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2180.059607382 0x9dac33e2f] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.059832173 0x9dac34f0a] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2180.060634621 0x9dac38b3a] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.060975715 0x9dac3a4cf] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.062564673 0x9dac41bfb] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.062969205 0x9dac43a52] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 ZsI ==> 0
[ 2180.063405715 0x9dac45b0f] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.063816392 0x9dac479db] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.065174517 0x9dac4dfb8] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.065611132 0x9dac50077] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.205884934 0x9daee18ff] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2180.206182330 0x9daee2f4d] dbg_prepare: ep6in: trb ffffffc01e7f51a0 (E27:D26) buf 00000000eb939000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.206552434 0x9daee4b10] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.212708007 0x9daf018bc] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2180.213079309 0x9daf03494] dbg_complete: ep6in: trb ffffffc01e7f51a0 (E27:D27) buf 00000000eb939000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.213713267 0x9daf06421] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2180.214376653 0x9daf095e1] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.214802799 0x9daf0b5d8] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2180.216308736 0x9daf126c9] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.216893945 0x9daf152ad] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.218962642 0x9daf1edd4] event (000090c2): ep0in: Transfer Not Ready [0] (Active) [Data Phase]
[ 2180.219202642 0x9daf1ffd4] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.219610872 0x9daf21e71] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2180.220028007 0x9daf23dbb] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.220455715 0x9daf25dce] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.221836132 0x9daf2c557] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.222268163 0x9daf2e5be] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.234992382 0x9daf6a00f] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.235204257 0x9daf6aff3] dbg_trace_log_ctrl: Get String Descriptor(Index = 3, Length = 64)
[ 2180.235662747 0x9daf6d255] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.235989726 0x9daf6eadc] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.237349622 0x9daf750da] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.237746497 0x9daf76e9e] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 18/18 ZsI ==> 0
[ 2180.238018424 0x9daf78303] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.238426497 0x9daf7a19d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.239059934 0x9daf7d120] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.239491080 0x9daf7f176] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.240732643 0x9daf84e93] event (0000608c): ep3out: Transfer In Progress [0] (SIm)
[ 2180.240965507 0x9daf8600a] dbg_complete: ep3out: trb ffffffc01e7d5000 (E8:D1) buf 00000000e8474000 size 16360 ctrl 00000818 (hlcS:sC:normal)
[ 2180.241304570 0x9daf87978] dbg_gadget_giveback: ep3out: req ffffff803412da00 length 24/16384 zsI ==> 0
[ 2180.242511393 0x9daf8d3fc] event (0000608c): ep3out: Transfer In Progress [0] (SIm)
[ 2180.242729674 0x9daf8e45a] dbg_complete: ep3out: trb ffffffc01e7d5010 (E8:D2) buf 00000000e910c000 size 16265 ctrl 00000818 (hlcS:sC:normal)
[ 2180.243082955 0x9daf8fed9] dbg_gadget_giveback: ep3out: req ffffff87fe56d100 length 119/16384 zsI ==> 0
[ 2180.249921653 0x9dafaffc0] dbg_ep_queue: ep3out: req ffffff87fa6c4300 length 0/16384 zsI ==> -115
[ 2180.250045872 0x9dafb0911] dbg_prepare: ep3out: trb ffffffc01e7d5080 (E9:D2) buf 00000000e8470000 size 16384 ctrl 00000819 (HlcS:sC:normal)
[ 2180.250221809 0x9dafb1643] dbg_send_ep_cmd: ep3out: cmd 'Update Transfer' [60007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.276241288 0x9db02b5b9] dbg_ep_queue: ep3out: req ffffff88ae52bd00 length 0/16384 zsI ==> -115
[ 2180.276392070 0x9db02c108] dbg_prepare: ep3out: trb ffffffc01e7d5090 (E10:D2) buf 00000000e8bf8000 size 16384 ctrl 00000819 (HlcS:sC:normal)
[ 2180.276564986 0x9db02ce00] dbg_send_ep_cmd: ep3out: cmd 'Update Transfer' [60007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.328527174 0x9db12072a] dbg_ep_queue: ep4in: req ffffff88ae52b500 length 0/24 zsI ==> -115
[ 2180.328811445 0x9db121c7d] dbg_prepare: ep4in: trb ffffffc01e77d000 (E1:D0) buf 00000000eae7bb00 size 24 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.329169205 0x9db123751] dbg_send_ep_cmd: ep4in: cmd 'Update Transfer' [90007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.331449778 0x9db12e25e] event (00004092): ep4in: Transfer In Progress [0] (sIm)
[ 2180.331896497 0x9db1303de] dbg_complete: ep4in: trb ffffffc01e77d000 (E1:D1) buf 00000000eae7bb00 size 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.332640299 0x9db133ba7] dbg_gadget_giveback: ep4in: req ffffff88ae52b500 length 24/24 zsI ==> 0
[ 2180.345677695 0x9db170d74] dbg_ep_queue: ep4in: req ffffff87fa6c4700 length 0/312 zsI ==> -115
[ 2180.345837226 0x9db17196b] dbg_prepare: ep4in: trb ffffffc01e77d010 (E2:D1) buf 00000000ea8bf600 size 312 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.346060195 0x9db172a24] dbg_send_ep_cmd: ep4in: cmd 'Update Transfer' [90007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.347300872 0x9db178733] event (00004092): ep4in: Transfer In Progress [0] (sIm)
[ 2180.347532018 0x9db179888] dbg_complete: ep4in: trb ffffffc01e77d010 (E2:D2) buf 00000000ea8bf600 size 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.347895507 0x9db17b3cb] dbg_gadget_giveback: ep4in: req ffffff87fa6c4700 length 312/312 zsI ==> 0
[ 2180.356971914 0x9db1a5c85] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2180.357089310 0x9db1a6553] dbg_prepare: ep6in: trb ffffffc01e7f51b0 (E28:D27) buf 00000000eb93d000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.357259518 0x9db1a7217] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.360218737 0x9db1b5009] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2180.360438372 0x9db1b6082] dbg_complete: ep6in: trb ffffffc01e7f51b0 (E28:D28) buf 00000000eb93d000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.360786497 0x9db1b7a9e] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2180.361139726 0x9db1b951c] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.361370612 0x9db1ba66c] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2180.362183424 0x9db1be362] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.362520299 0x9db1bfca7] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.363151966 0x9db1c2c07] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.363560299 0x9db1c4aa7] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2180.363922643 0x9db1c65d4] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.364321080 0x9db1c83b5] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.365548424 0x9db1cdfc3] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.365975143 0x9db1cffc4] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.446107279 0x9db3479ac] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2180.446215716 0x9db3481ce] dbg_prepare: ep6in: trb ffffffc01e7f51c0 (E29:D28) buf 00000000eb17f000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.446382852 0x9db348e57] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.450710404 0x9db35d2e9] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2180.450930404 0x9db35e369] dbg_complete: ep6in: trb ffffffc01e7f51c0 (E29:D29) buf 00000000eb17f000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.451293529 0x9db35fea5] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2180.451624206 0x9db361772] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.451830195 0x9db3626e5] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2180.452495456 0x9db3658ca] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.452855820 0x9db3673d1] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.454104674 0x9db36d17b] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.454431549 0x9db36e9ff] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 ZsI ==> 0
[ 2180.454845612 0x9db37090c] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.455253216 0x9db37279f] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.469868997 0x9db3b6fcd] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.470729779 0x9db3bb05d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.542495977 0x9db50b6d3] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2180.542607018 0x9db50bf27] dbg_prepare: ep6in: trb ffffffc01e7f51d0 (E30:D29) buf 00000000ea528000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.542758529 0x9db50ca84] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.546653893 0x9db51eeab] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2180.546888841 0x9db52004b] dbg_complete: ep6in: trb ffffffc01e7f51d0 (E30:D30) buf 00000000ea528000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.547233633 0x9db521a27] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2180.547586810 0x9db5234a4] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.547770143 0x9db524264] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2180.548470039 0x9db5276e2] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.548797227 0x9db528f6b] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.550109623 0x9db52f1da] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.550488581 0x9db530e45] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 ZsI ==> 0
[ 2180.550897071 0x9db532ce9] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.551279414 0x9db534995] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.552464206 0x9db53a272] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.552861810 0x9db53c044] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.563064050 0x9db56bd6e] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2180.563186706 0x9db56c6a2] dbg_prepare: ep6in: trb ffffffc01e7f51e0 (E31:D30) buf 00000000efefd000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.563355664 0x9db56d34d] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.569084362 0x9db5880f6] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2180.569520821 0x9db58a1b0] dbg_complete: ep6in: trb ffffffc01e7f51e0 (E31:D31) buf 00000000efefd000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.570184258 0x9db58d373] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2180.570825821 0x9db590392] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.571263841 0x9db59246b] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2180.572652591 0x9db598c93] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.573291862 0x9db59bc85] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.577588789 0x9db5afecb] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.578094675 0x9db5b24bc] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 ZsI ==> 0
[ 2180.578691810 0x9db5b5184] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.579457331 0x9db5b8aee] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.582382019 0x9db5c6649] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.583164414 0x9db5ca0f6] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.639438633 0x9db6d1d86] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2180.639616238 0x9db6d2ad8] dbg_prepare: ep6in: trb ffffffc01e7f51f0 (E32:D31) buf 00000000eb16e000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.639849258 0x9db6d3c52] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.644931602 0x9db6eb981] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2180.645269258 0x9db6ed2d3] dbg_complete: ep6in: trb ffffffc01e7f51f0 (E32:D32) buf 00000000eb16e000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.645879102 0x9db6f008f] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2180.646541290 0x9db6f323a] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.646966863 0x9db6f5225] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2180.648363685 0x9db6fbae9] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.648969623 0x9db6fe85a] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.652689935 0x9db70ff61] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.653433373 0x9db713722] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 194/194 ZsI ==> 0
[ 2180.654230873 0x9db7172f2] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.654997904 0x9db71ac78] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.657473842 0x9db72662c] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.658265456 0x9db72a18b] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.659284831 0x9db72edff] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.659726446 0x9db730f1d] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2180.660706863 0x9db7358a5] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.661038894 0x9db73718c] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.665893581 0x9db74dda7] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2180.666653790 0x9db7516aa] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2180.667586029 0x9db755c94] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.668368373 0x9db759742] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.671384311 0x9db767975] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2180.672256915 0x9db76bae7] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.714281446 0x9db830abc] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2180.714403581 0x9db8313e5] dbg_prepare: ep6in: trb ffffffc01e7f5200 (E33:D32) buf 00000000e913f000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.714573634 0x9db8320a6] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.719370665 0x9db84886f] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2180.719797436 0x9db84a86f] dbg_complete: ep6in: trb ffffffc01e7f5200 (E33:D33) buf 00000000e913f000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.720354363 0x9db84d236] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2180.720938790 0x9db84fe09] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.721298321 0x9db851900] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2180.722570404 0x9db857868] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.723116915 0x9db85a165] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.737739988 0x9db89ea22] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.738505821 0x9db8a2391] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 27/27 ZsI ==> 0
[ 2180.739330977 0x9db8a6174] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.740097019 0x9db8a9ae8] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.742834519 0x9db8b6839] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.743676446 0x9db8ba75e] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.813745873 0x9dba02e91] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2180.813900092 0x9dba03a22] dbg_prepare: ep6in: trb ffffffc01e7f5210 (E34:D33) buf 00000000e8d67000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.814069884 0x9dba046de] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.818739103 0x9dba1a510] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2180.818979780 0x9dba1b71d] dbg_complete: ep6in: trb ffffffc01e7f5210 (E34:D34) buf 00000000e8d67000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.819403582 0x9dba1d6e6] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2180.819750196 0x9dba1f0e5] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.819961915 0x9dba200c6] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2180.820758842 0x9dba23c8a] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.821104311 0x9dba25674] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.822443582 0x9dba2bae6] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.822889780 0x9dba2dc5c] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2180.823316811 0x9dba2fc64] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.823711134 0x9dba319f7] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.829556082 0x9dba4d056] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.829999467 0x9dba4f197] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.830650144 0x9dba52264] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.830888530 0x9dba53445] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2180.831618582 0x9dba56b06] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.831946290 0x9dba5839a] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.833264988 0x9dba5e681] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2180.833730249 0x9dba60966] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2180.834724415 0x9dba653f6] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.835136707 0x9dba672e1] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.836730196 0x9dba6ea65] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2180.837162592 0x9dba70ad3] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.862405665 0x9dbae700d] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2180.862530665 0x9dbae796d] dbg_prepare: ep6in: trb ffffffc01e7f5220 (E35:D34) buf 00000000effef000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.862701394 0x9dbae863b] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.866797488 0x9dbafb971] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2180.867026499 0x9dbafca9d] dbg_complete: ep6in: trb ffffffc01e7f5220 (E35:D35) buf 00000000effef000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.867379051 0x9dbafe50f] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2180.867705249 0x9dbaffd85] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.867902072 0x9dbb00c48] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2180.868560978 0x9dbb03db4] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.868896551 0x9dbb056df] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.870089832 0x9dbb0b05e] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.870479155 0x9dbb0cd91] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 53/53 ZsI ==> 0
[ 2180.870903269 0x9dbb0ed5f] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.871318686 0x9dbb10c87] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.872900561 0x9dbb1832c] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.873350613 0x9dbb1a4ec] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.874009988 0x9dbb1d661] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.874247697 0x9dbb1e835] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2180.874919467 0x9dbb21a97] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.875272124 0x9dbb2350a] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.876590613 0x9dbb297ed] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2180.876996186 0x9dbb2b658] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2180.877966915 0x9dbb2ff26] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.878369728 0x9dbb31d5c] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.879024624 0x9dbb34e7a] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2180.879477801 0x9dbb37076] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.901070665 0x9dbb9c3ed] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2180.901223270 0x9dbb9cf5f] dbg_prepare: ep6in: trb ffffffc01e7f5230 (E36:D35) buf 00000000ea153000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.901402020 0x9dbb9dcc7] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.903374103 0x9dbba70b0] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2180.903611551 0x9dbba827e] dbg_complete: ep6in: trb ffffffc01e7f5230 (E36:D36) buf 00000000ea153000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.904031863 0x9dbbaa205] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2180.904382592 0x9dbbabc52] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.904603634 0x9dbbacce7] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2180.905456551 0x9dbbb0cdf] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.905807124 0x9dbbb272a] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.907090978 0x9dbbb8774] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.907556968 0x9dbbbaa67] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2180.907957228 0x9dbbbc86b] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.908354676 0x9dbbbe63d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.909398895 0x9dbbc348c] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.909755978 0x9dbbc4f54] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.910376134 0x9dbbc7dd7] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.910613322 0x9dbbc8fa1] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2180.911342332 0x9dbbcc64d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.911697749 0x9dbbce0f6] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.912867436 0x9dbbd38b0] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2180.913335040 0x9dbbd5bc1] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2180.914304780 0x9dbbda47d] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.914699259 0x9dbbdc213] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.915357020 0x9dbbdf368] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2180.915757540 0x9dbbe1171] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.934474311 0x9dbc38d33] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2180.934584780 0x9dbc3957d] dbg_prepare: ep6in: trb ffffffc01e7f5240 (E37:D36) buf 00000000ea553000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2180.934755822 0x9dbc3a250] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2180.938818270 0x9dbc4d300] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2180.939039676 0x9dbc4e39a] dbg_complete: ep6in: trb ffffffc01e7f5240 (E37:D37) buf 00000000ea553000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2180.939390457 0x9dbc4fdea] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2180.941373738 0x9dbc592a9] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.941611603 0x9dbc5a47f] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2180.942414416 0x9dbc5e0b5] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.942758270 0x9dbc5fa7f] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.943387124 0x9dbc629aa] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2180.943770041 0x9dbc64662] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 ZsI ==> 0
[ 2180.944212801 0x9dbc66797] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.944621811 0x9dbc68644] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.945777384 0x9dbc6dcef] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2180.946226134 0x9dbc6fe96] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.946868791 0x9dbc72ec9] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2180.947105249 0x9dbc74086] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2180.947734207 0x9dbc76fb2] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.947968270 0x9dbc7813f] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2180.949362280 0x9dbc7e9cd] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2180.949774936 0x9dbc808c0] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2180.950719832 0x9dbc84f9e] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2180.951145509 0x9dbc86f8b] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2180.952363530 0x9dbc8cae5] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2180.952805822 0x9dbc8ec10] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.144134312 0x9dc00f9b3] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2181.144259729 0x9dc01031b] dbg_prepare: ep6in: trb ffffffc01e7f5250 (E38:D37) buf 00000000e912a000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2181.144425770 0x9dc010f8f] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2181.147039989 0x9dc01d3a1] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2181.147271187 0x9dc01e4f8] dbg_complete: ep6in: trb ffffffc01e7f5250 (E38:D38) buf 00000000e912a000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2181.147621760 0x9dc01ff43] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2181.149238999 0x9dc02788e] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.149446447 0x9dc02881d] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2181.150189104 0x9dc02bfd0] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.150463010 0x9dc02d45a] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.151186968 0x9dc030aa7] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2181.151899416 0x9dc034016] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 44/44 ZsI ==> 0
[ 2181.152628322 0x9dc0376c0] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.153115562 0x9dc039b4c] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.154792020 0x9dc041908] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2181.155563427 0x9dc0452e3] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.158192697 0x9dc051815] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.158361968 0x9dc0524c6] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2181.159557645 0x9dc057e74] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.159866500 0x9dc05959e] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.162717593 0x9dc066b73] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2181.163434885 0x9dc06a13f] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2181.164943375 0x9dc071263] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.165747489 0x9dc074eb2] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.171172229 0x9dc08e58d] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2181.171996968 0x9dc092368] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.262983114 0x9dc23cb5d] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2181.263220562 0x9dc23dd2c] dbg_prepare: ep6in: trb ffffffc01e7f5260 (E39:D38) buf 00000000ece5a000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2181.263564000 0x9dc23f6ed] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2181.269897594 0x9dc25d1f3] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2181.270124885 0x9dc25e2ff] dbg_complete: ep6in: trb ffffffc01e7f5260 (E39:D39) buf 00000000ece5a000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2181.270474312 0x9dc25fd34] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2181.270840719 0x9dc2618af] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.271080042 0x9dc262aa1] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2181.271861187 0x9dc266538] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.272183896 0x9dc267d6b] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.273418583 0x9dc26da06] event (000090c2): ep0in: Transfer Not Ready [0] (Active) [Data Phase]
[ 2181.273646864 0x9dc26eb24] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2181.274049417 0x9dc270955] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2181.274478114 0x9dc27297d] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.274903635 0x9dc274967] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.303273323 0x9dc2f9924] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2181.304098271 0x9dc2fd701] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.306543010 0x9dc308e5b] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.306980042 0x9dc30af21] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2181.308232542 0x9dc310d12] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.308864417 0x9dc313c76] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.312823844 0x9dc32656c] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2181.313540146 0x9dc329b24] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2181.315487333 0x9dc332d2f] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.316233271 0x9dc336521] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.318739573 0x9dc34211a] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2181.319590406 0x9dc3460e9] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.461297594 0x9dc5de4f2] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2181.461386084 0x9dc5deb95] dbg_prepare: ep6in: trb ffffffc01e7f5270 (E40:D39) buf 00000000ece5a000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2181.461484730 0x9dc5df2fc] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2181.461872750 0x9dc5e1016] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2181.461925563 0x9dc5e140b] dbg_complete: ep6in: trb ffffffc01e7f5270 (E40:D40) buf 00000000ece5a000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2181.462031709 0x9dc5e1c02] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2181.462215407 0x9dc5e29c9] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.462269886 0x9dc5e2ddf] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2181.462480928 0x9dc5e3db3] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.462562073 0x9dc5e43c9] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.462715667 0x9dc5e4f4e] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2181.462810511 0x9dc5e566a] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 87/87 ZsI ==> 0
[ 2181.462905615 0x9dc5e5d8d] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.463003740 0x9dc5e64e9] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.463167230 0x9dc5e712c] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2181.463274000 0x9dc5e792e] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.464331136 0x9dc5ec877] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.464385042 0x9dc5ecc82] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2181.464551032 0x9dc5ed8f4] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.464629625 0x9dc5ededa] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.464783792 0x9dc5eea6a] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2181.464879313 0x9dc5ef194] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2181.464999365 0x9dc5efa95] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.465096448 0x9dc5f01dc] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.465260615 0x9dc5f0e2c] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2181.465365719 0x9dc5f160f] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.465526448 0x9dc5f221d] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.465578740 0x9dc5f2609] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 17)
[ 2181.465741813 0x9dc5f3244] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.465821032 0x9dc5f3834] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.465973011 0x9dc5f439b] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.466023740 0x9dc5f4768] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2181.466117959 0x9dc5f4e7a] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 17/17 zsI ==> 0
[ 2181.466228688 0x9dc5f56c7] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.466326605 0x9dc5f5e1f] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.466491344 0x9dc5f6a7b] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2181.466596084 0x9dc5f7255] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.466758063 0x9dc5f7e7c] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.466808948 0x9dc5f824c] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2181.466971292 0x9dc5f8e7a] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.467049365 0x9dc5f9455] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.467202855 0x9dc5f9fd7] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2181.467297803 0x9dc5fa6f7] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2181.467411292 0x9dc5faf7a] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.467510928 0x9dc5fb6f3] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.469111240 0x9dc602ef9] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2181.469218480 0x9dc603704] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.469381761 0x9dc604343] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.469432334 0x9dc60470e] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2181.469595771 0x9dc605350] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.469675355 0x9dc605948] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.473233532 0x9dc616424] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2181.473262125 0x9dc616649] dbg_prepare: ep6in: trb ffffffc01e7f5280 (E41:D40) buf 00000000ea52f000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2181.473298428 0x9dc616903] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2181.473493375 0x9dc6177a2] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2181.473595563 0x9dc617f4b] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2181.473713844 0x9dc61882b] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.473814261 0x9dc618fb3] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.473980407 0x9dc619c29] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2181.474029625 0x9dc619fda] dbg_complete: ep6in: trb ffffffc01e7f5280 (E41:D41) buf 00000000ea52f000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2181.474119261 0x9dc61a693] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2181.474197386 0x9dc61ac6e] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2181.474301292 0x9dc61b439] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.475618584 0x9dc621706] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.475672125 0x9dc621b0a] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2181.475739782 0x9dc62201c] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2181.475762125 0x9dc6221c9] dbg_prepare: ep6in: trb ffffffc01e7f5290 (E42:D41) buf 00000000ea533000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2181.475796136 0x9dc622456] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2181.475890667 0x9dc622b6d] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.475971500 0x9dc62317e] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.476127178 0x9dc623d2b] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2181.476221969 0x9dc624446] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 24/24 ZsI ==> 0
[ 2181.476335615 0x9dc624ccc] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.476434365 0x9dc625435] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.476598844 0x9dc62608b] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2181.476704000 0x9dc62686e] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.476868011 0x9dc6274bb] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.476919625 0x9dc627899] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2181.477084469 0x9dc6284f7] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.477164313 0x9dc628af4] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.477318480 0x9dc629684] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2181.477413011 0x9dc629d9b] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2181.477524261 0x9dc62a5f3] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.477622803 0x9dc62ad57] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.477785771 0x9dc62b990] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2181.477833948 0x9dc62bd2d] dbg_complete: ep6in: trb ffffffc01e7f5290 (E42:D42) buf 00000000ea533000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2181.477923428 0x9dc62c3e3] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2181.478001344 0x9dc62c9ba] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2181.478104834 0x9dc62d17d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.478180771 0x9dc62d72f] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2181.478201709 0x9dc62d8c1] dbg_prepare: ep6in: trb ffffffc01e7f52a0 (E43:D42) buf 00000000ebaf0000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2181.478235042 0x9dc62db41] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2181.478267490 0x9dc62ddb1] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.478320198 0x9dc62e1a4] dbg_trace_log_ctrl: Clear Interface Feature(Function Suspend)
[ 2181.478516292 0x9dc62f05a] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.478595563 0x9dc62f64c] event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.478748636 0x9dc6301c7] event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
[ 2181.478842750 0x9dc6308d6] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 27/27 ZsI ==> 0
[ 2181.478951865 0x9dc631105] event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.479049625 0x9dc631859] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.479211344 0x9dc63247b] event (0000c040): ep0out: Transfer Complete (sIL) [Status Phase]
[ 2181.479317855 0x9dc632c78] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.479654834 0x9dc6345be] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.479707178 0x9dc6349ab] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 13)
[ 2181.479871084 0x9dc6355f6] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.479949625 0x9dc635bda] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.480102178 0x9dc63674b] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2181.480196865 0x9dc636e64] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 13/13 zsI ==> 0
[ 2181.480305875 0x9dc637691] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.480403219 0x9dc637ddf] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.480564521 0x9dc6389f7] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2181.480668844 0x9dc6391ca] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.480831292 0x9dc639dfa] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.480882907 0x9dc63a1d8] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 17)
[ 2181.481044730 0x9dc63adfb] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.481122073 0x9dc63b3c9] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.481274834 0x9dc63bf3d] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2181.481368532 0x9dc63c645] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 17/17 zsI ==> 0
[ 2181.481478167 0x9dc63ce7e] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.481577334 0x9dc63d5ed] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.481740407 0x9dc63e228] event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
[ 2181.481845771 0x9dc63ea10] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.481907855 0x9dc63eeb8] event (0000409a): ep6in: Transfer In Progress [0] (sIm)
[ 2181.481956865 0x9dc63f265] dbg_complete: ep6in: trb ffffffc01e7f52a0 (E43:D43) buf 00000000ebaf0000 size 1x 0 ctrl 00000810 (hlcs:sC:normal)
[ 2181.482044730 0x9dc63f8fc] dbg_gadget_giveback: ep6in: req ffffff8860657500 length 8/8 zsI ==> 0
[ 2181.482222490 0x9dc640651] event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
[ 2181.482273271 0x9dc640a20] dbg_trace_log_ctrl: Get Interface Status(Intf = 4, Length = 20)
[ 2181.482334782 0x9dc640ebc] dbg_ep_queue: ep6in: req ffffff8860657500 length 0/8 zsI ==> -115
[ 2181.482357386 0x9dc64106e] dbg_prepare: ep6in: trb ffffffc01e7f52b0 (E44:D43) buf 00000000ea578000 size 1x 8 ctrl 00000811 (Hlcs:sC:normal)
[ 2181.482391865 0x9dc641304] dbg_send_ep_cmd: ep6in: cmd 'Update Transfer' [d0007] params 00000000 00000000 00000000 --> status: Successful
[ 2181.482485615 0x9dc641a0d] dbg_send_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.482565303 0x9dc642006] event (000010c0): ep0out: Transfer Not Ready [0] (Not Active) [Data Phase]
[ 2181.482719417 0x9dc642b96] event (00002040): ep0out: Transfer Complete (Sil) [Data Phase]
[ 2181.482814938 0x9dc6432c0] dbg_gadget_giveback: ep0out: req ffffff87df84d900 length 20/20 zsI ==> 0
[ 2181.482926084 0x9dc643b16] event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
[ 2181.483024261 0x9dc644272] dbg_send_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 efffa000 00000000 --> status: Successful
[ 2181.483069521 0x9dc6445d7] dbg_ep_dequeue: ep2in: req ffffff879f5a8b00 length 0/63680 zsI ==> -115
[ 2181.496068792 0x9dc6814c9] dbg_send_ep_cmd: ep2in: cmd 'End Transfer' [50d08] params 00000000 00000000 00000000 --> status: Timed Out
next prev parent reply other threads:[~2022-02-28 22:54 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220214111148epcas2p3fac143c7870c53ecadfb6b093fcf626b@epcas2p3.samsung.com>
2022-02-14 11:08 ` [PATCH v2 0/2] Fix ep command fail issue in dequeue Daehwan Jung
[not found] ` <CGME20220214111149epcas2p1a1faeda037991885fd6f2f026fa44ec5@epcas2p1.samsung.com>
2022-02-14 11:08 ` [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails Daehwan Jung
2022-02-14 11:29 ` Greg Kroah-Hartman
2022-02-15 6:58 ` Jung Daehwan
2022-02-15 7:37 ` Greg Kroah-Hartman
2022-02-15 8:20 ` Jung Daehwan
2022-02-14 18:44 ` Thinh Nguyen
2022-02-15 6:39 ` Jung Daehwan
2022-02-15 17:14 ` Thinh Nguyen
2022-02-17 20:05 ` Wesley Cheng
2022-02-17 23:43 ` Thinh Nguyen
2022-02-22 18:08 ` Wesley Cheng
2022-02-23 2:59 ` Thinh Nguyen
2022-02-24 21:45 ` Wesley Cheng
2022-02-25 1:26 ` Thinh Nguyen
2022-02-25 1:31 ` Wesley Cheng
2022-02-25 1:44 ` Thinh Nguyen
2022-02-28 22:53 ` Wesley Cheng [this message]
2022-03-01 1:09 ` Thinh Nguyen
2022-03-01 2:09 ` Wesley Cheng
2022-03-01 3:02 ` Thinh Nguyen
2022-03-04 21:58 ` Wesley Cheng
2022-03-05 0:53 ` Thinh Nguyen
2022-03-07 22:57 ` Wesley Cheng
2022-03-07 23:51 ` Thinh Nguyen
2022-03-08 19:20 ` Wesley Cheng
2022-02-18 4:44 ` Jung Daehwan
2022-02-23 2:11 ` Thinh Nguyen
[not found] ` <CGME20220214111149epcas2p29b9e39b84d7203572422531beb3c39ed@epcas2p2.samsung.com>
2022-02-14 11:08 ` [PATCH v2 2/2] usb: dwc3: Prevent cleanup cancelled requests at the same time Daehwan Jung
2022-02-14 11:30 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e165c644-4ad0-b103-4f8b-2d3bc1b211f1@codeaurora.org \
--to=wcheng@codeaurora.org \
--cc=Thinh.Nguyen@synopsys.com \
--cc=balbi@kernel.org \
--cc=dh10.jung@samsung.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=quic_jackp@quicinc.com \
--cc=quic_wcheng@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).