From: Akhil P Oommen <akhilpo@codeaurora.org>
To: Stephen Boyd <swboyd@chromium.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
<devicetree@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
dri-devel@lists.freedesktop.org,
freedreno <freedreno@lists.freedesktop.org>,
linux-arm-msm@vger.kernel.org
Cc: Jonathan Marek <jonathan@marek.ca>,
linux-kernel@vger.kernel.org,
Douglas Anderson <dianders@chromium.org>,
Jordan Crouse <jordan@cosmicpenguin.net>,
Andy Gross <agross@kernel.org>,
Matthias Kaehlcke <mka@chromium.org>
Subject: Re: [PATCH v2] arm64: dts: qcom: sc7280: Add gpu support
Date: Wed, 28 Jul 2021 12:47:45 +0530 [thread overview]
Message-ID: <e1a28bed-a2a9-2bf2-d0f0-3f608a538f69@codeaurora.org> (raw)
In-Reply-To: <CAE-0n52mEy1GReYwcVrffT2KOy4EHMHH-RyCJ_mmxhaeXwGdYA@mail.gmail.com>
On 7/27/2021 5:46 AM, Stephen Boyd wrote:
> Quoting Akhil P Oommen (2021-07-24 10:29:00)
>> Add the necessary dt nodes for gpu support in sc7280.
>>
>> Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
>> ---
>> This patch has dependency on the GPUCC bindings patch here:
>> https://patchwork.kernel.org/project/linux-arm-msm/patch/1619519590-3019-4-git-send-email-tdas@codeaurora.org/
>
> To avoid the dependency the plain numbers can be used.
But, won't that reduce readability and make things prone to error? If
the other patch doesn't get picked up soon, we should try this option.
We like to get this patch merged in v5.15.
>
>>
>> Changes in v2:
>> - formatting update and removed a duplicate header (Stephan)
>>
>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 116 +++++++++++++++++++++++++++++++++++
>> 1 file changed, 116 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> index 029723a..524a5e0 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> @@ -585,6 +586,121 @@
>> #clock-cells = <1>;
>> };
>>
>> + gpu@3d00000 {
>> + compatible = "qcom,adreno-635.0", "qcom,adreno";
>> + #stream-id-cells = <16>;
>> + reg = <0 0x03d00000 0 0x40000>,
>> + <0 0x03d9e000 0 0x1000>,
>> + <0 0x03d61000 0 0x800>;
>> + reg-names = "kgsl_3d0_reg_memory",
>> + "cx_mem",
>> + "cx_dbgc";
>> + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
>> + iommus = <&adreno_smmu 0 0x401>;
>> + operating-points-v2 = <&gpu_opp_table>;
>> + qcom,gmu = <&gmu>;
>> + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
>> + interconnect-names = "gfx-mem";
>> +
>> + gpu_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + opp-550000000 {
>> + opp-hz = /bits/ 64 <550000000>;
>> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>> + opp-peak-kBps = <6832000>;
>> + };
>> +
>> + opp-450000000 {
>> + opp-hz = /bits/ 64 <450000000>;
>> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>> + opp-peak-kBps = <4068000>;
>> + };
>> +
>> + opp-315000000 {
>> + opp-hz = /bits/ 64 <315000000>;
>> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> + opp-peak-kBps = <1804000>;
>> + };
>> + };
>> + };
>> +
>> + gmu: gmu@3d69000 {
>> + compatible="qcom,adreno-gmu-635.0", "qcom,adreno-gmu";
>> + reg = <0 0x03d6a000 0 0x34000>,
>> + <0 0x3de0000 0 0x10000>,
>> + <0 0x0b290000 0 0x10000>;
>> + reg-names = "gmu", "rscc", "gmu_pdc";
>> + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hfi", "gmu";
>> + clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
>> + <&gpucc GPU_CC_CXO_CLK>,
>> + <&gcc GCC_DDRSS_GPU_AXI_CLK>,
>> + <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
>> + <&gpucc GPU_CC_AHB_CLK>,
>> + <&gpucc GPU_CC_HUB_CX_INT_CLK>,
>> + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
>> + clock-names = "gmu",
>> + "cxo",
>> + "axi",
>> + "memnoc",
>> + "ahb",
>> + "hub",
>> + "smmu_vote";
>> + power-domains = <&gpucc GPU_CC_CX_GDSC>,
>> + <&gpucc GPU_CC_GX_GDSC>;
>> + power-domain-names = "cx",
>> + "gx";
>> + iommus = <&adreno_smmu 5 0x400>;
>> + operating-points-v2 = <&gmu_opp_table>;
>> +
>> + gmu_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + opp-200000000 {
>> + opp-hz = /bits/ 64 <200000000>;
>> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>> + };
>> + };
>> + };
>> +
>> + adreno_smmu: iommu@3da0000 {
>> + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
>> + reg = <0 0x03da0000 0 0x20000>;
>> + #iommu-cells = <2>;
>> + #global-interrupts = <2>;
>> + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
>> + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
>> + <&gpucc GPU_CC_AHB_CLK>,
>> + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
>> + <&gpucc GPU_CC_CX_GMU_CLK>,
>> + <&gpucc GPU_CC_HUB_CX_INT_CLK>,
>> + <&gpucc GPU_CC_HUB_AON_CLK>;
>> + clock-names = "gcc_gpu_memnoc_gfx_clk",
>> + "gcc_gpu_snoc_dvm_gfx_clk",
>> + "gpu_cc_ahb_clk",
>> + "gpu_cc_hlos1_vote_gpu_smmu_clk",
>> + "gpu_cc_cx_gmu_clk",
>> + "gpu_cc_hub_cx_int_clk",
>> + "gpu_cc_hub_aon_clk";
>> +
>> + power-domains = <&gpucc GPU_CC_CX_GDSC>;
>> + };
>> +
>> lpass_ag_noc: interconnect@3c40000 {
>
> This node is 3c40000 and the one above is 3da0000. 3c comes before 3d.
> Please order nodes properly.
Yeah, I messed up the order at a couple of places. Will fix.
-Akhil.
>
>> reg = <0 0x03c40000 0 0xf080>;
>> compatible = "qcom,sc7280-lpass-ag-noc";
next prev parent reply other threads:[~2021-07-28 7:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-24 17:29 [PATCH v2] arm64: dts: qcom: sc7280: Add gpu support Akhil P Oommen
2021-07-27 0:16 ` Stephen Boyd
2021-07-28 7:17 ` Akhil P Oommen [this message]
2021-07-29 17:16 ` Stephen Boyd
2021-07-29 18:57 ` Akhil P Oommen
2021-07-29 19:02 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e1a28bed-a2a9-2bf2-d0f0-3f608a538f69@codeaurora.org \
--to=akhilpo@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jonathan@marek.ca \
--cc=jordan@cosmicpenguin.net \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).