From: Takashi Iwai <tiwai@suse.de>
To: Arnd Bergmann <arnd@arndb.de>
Cc: <alsa-devel@alsa-project.org>, Takashi Iwai <tiwai@suse.com>,
Baolin Wang <baolin.wang7@gmail.com>, <y2038@lists.linaro.org>,
<linux-kernel@vger.kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Mark Brown <broonie@kernel.org>
Subject: Re: [PATCH v6 0/8] Fix year 2038 issue for sound subsystem
Date: Tue, 12 Nov 2019 21:37:49 +0100 [thread overview]
Message-ID: <s5hk1847rvm.wl-tiwai@suse.de> (raw)
In-Reply-To: <20191112151642.680072-1-arnd@arndb.de>
On Tue, 12 Nov 2019 16:16:34 +0100,
Arnd Bergmann wrote:
>
> This is a series I worked on with Baolin in 2017 and 2018, but we
> never quite managed to finish up the last pieces. During the
> ALSA developer meetup at ELC-E 2018 in Edinburgh, a decision was
> made to go with this approach for keeping best compatibility
> with existing source code, and then I failed to follow up by
> resending the patches.
>
> Now I have patches for all remaining time_t uses in the kernel,
> so it's absolutely time to revisit them. I have done more
> review of the patches myself and found a couple of minor issues
> that I have fixed up, otherwise the series is still the same as
> before.
>
> Conceptually, the idea of these patches is:
>
> - 64-bit applications should see no changes at all, neither
> compile-time nor run-time.
>
> - 32-bit code compiled with a 64-bit time_t currently
> does not work with ALSA, and requires kernel changes and/or
> sound/asound.h changes
>
> - Most 32-bit code using these interfaces will work correctly
> on a modified kernel, with or without the uapi header changes.
>
> - 32-bit code using SNDRV_TIMER_IOCTL_TREAD requires the
> updated header file for 64-bit time_t support
>
> - 32-bit i386 user space with 64-bit time_t is broken for
> SNDRV_PCM_IOCTL_STATUS, SNDRV_RAWMIDI_IOCTL_STATUS and
> SNDRV_PCM_IOCTL_SYNC_PTR because of i386 alignment. This is also
> addressed by the updated uapi header.
>
> - PCM mmap is currently supported on native x86 kernels
> (both 32-bit and 64-bit) but not for compat mode. This series breaks
> the 32-bit native mmap support for 32-bit time_t, but instead allows
> it for 64-bit time_t on both native and compat kernels. This seems to
> be the best trade-off, as mmap support is optional already, and most
> 32-bit code runs in compat mode anyway.
>
> - I've tried to avoid breaking compilation of 32-bit code
> as much as possible. Anything that does break however is likely code
> that is already broken on 64-bit time_t and needs source changes to
> fix them.
>
> I would like to propose merging this into the alsa tree after
> the v5.5 merge window for inclusion into v5.6, to allow a good
> amount of testing, in particular for the header changes that
> may cause problems for user space applications.
Agreed, it's still no urgent problem.
> A git branch with the same contents is available for testing at [1].
>
> Please review and test!
>
> Arnd
So now taking a quick look through the series, I find this approach is
the way to go. Although one might get a bit more optimization after
squeeze, it's already a good compromise between the readability and
the efficiency.
A slight uncertain implementation is the timer tread stuff, especially
the conditional definition of SNDRV_TIMER_IOCTL_TREAD (IIRC, I already
complained it in the past, too). But I have no other idea as well, so
unless someone else gives a better option, we can live with that.
Thanks!
Takashi
>
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git y2038-alsa
> [2] https://lore.kernel.org/lkml/CAK8P3a2Os66+iwQYf97qh05W2JP8rmWao8zmKoHiXqVHvyYAJA@mail.gmail.com/T/#m6519cb07cfda08adf1dedea6596bb98892b4d5dc
>
> Changes since v5 (Arnd):
> - Rebased to linux-5.4-rc4
> - Updated to completely remove timespec and time_t references from alsa
> - found and fixed a few bugs
>
> Changes since v4 (Baolin):
> - Add patch 5 to change trigger_tstamp member of struct snd_pcm_runtime.
> - Add patch 8 to change internal timespec.
> - Add more explanation in commit message.
> - Use ktime_get_real_ts64() in patch 6.
> - Split common code out into a separate function in patch 6.
> - Fix tu->tread bug in patch 6 and remove #if __BITS_PER_LONG == 64 macro.
>
> Changes since v3:
> - Move struct snd_pcm_status32 to pcm.h file.
> - Modify comments and commit message.
> - Add new patch2 ~ patch6.
>
> Changes since v2:
> - Renamed all structures to make clear.
> - Remove CONFIG_X86_X32 macro and introduced new compat_snd_pcm_status64_x86_32.
>
> Changes since v1:
> - Add one macro for struct snd_pcm_status_32 which only active in 32bits kernel.
> - Convert pcm_compat.c to use struct snd_pcm_status_64.
> - Convert pcm_native.c to use struct snd_pcm_status_64.
>
> ---
>
> Arnd Bergmann (2):
> ALSA: move snd_pcm_ioctl_sync_ptr_compat into pcm_native.c
> ALSA: add new 32-bit layout for snd_pcm_mmap_status/control
>
> Baolin Wang (6):
> ALSA: Replace timespec with timespec64
> ALSA: Avoid using timespec for struct snd_timer_status
> ALSA: Avoid using timespec for struct snd_ctl_elem_value
> ALSA: Avoid using timespec for struct snd_pcm_status
> ALSA: Avoid using timespec for struct snd_rawmidi_status
> ALSA: Avoid using timespec for struct snd_timer_tread
>
> include/sound/pcm.h | 74 ++++++--
> include/sound/timer.h | 4 +-
> include/uapi/sound/asound.h | 132 ++++++++++++--
> sound/core/pcm.c | 12 +-
> sound/core/pcm_compat.c | 282 ++++++++----------------------
> sound/core/pcm_lib.c | 38 ++--
> sound/core/pcm_native.c | 226 +++++++++++++++++++++---
> sound/core/rawmidi.c | 132 +++++++++++---
> sound/core/rawmidi_compat.c | 87 +++------
> sound/core/timer.c | 229 ++++++++++++++++++------
> sound/core/timer_compat.c | 62 +------
> sound/pci/hda/hda_controller.c | 10 +-
> sound/soc/intel/skylake/skl-pcm.c | 4 +-
> 13 files changed, 804 insertions(+), 488 deletions(-)
>
> --
> 2.20.0
>
next prev parent reply other threads:[~2019-11-12 20:37 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-12 15:16 [PATCH v6 0/8] Fix year 2038 issue for sound subsystem Arnd Bergmann
2019-11-12 15:16 ` [PATCH v6 1/8] ALSA: Replace timespec with timespec64 Arnd Bergmann
2019-11-12 15:16 ` [PATCH v6 2/8] ALSA: Avoid using timespec for struct snd_timer_status Arnd Bergmann
2019-11-12 15:42 ` Takashi Iwai
2019-11-12 20:08 ` Arnd Bergmann
2019-11-12 20:28 ` Takashi Iwai
2019-11-13 15:09 ` Arnd Bergmann
2019-11-12 15:16 ` [PATCH v6 3/8] ALSA: Avoid using timespec for struct snd_ctl_elem_value Arnd Bergmann
2019-11-12 15:16 ` [PATCH v6 4/8] ALSA: Avoid using timespec for struct snd_pcm_status Arnd Bergmann
2019-11-12 15:16 ` [PATCH v6 5/8] ALSA: Avoid using timespec for struct snd_rawmidi_status Arnd Bergmann
2019-11-12 16:38 ` [alsa-devel] " Takashi Iwai
2019-11-12 20:04 ` Arnd Bergmann
2019-11-12 20:26 ` Takashi Iwai
2019-11-13 15:16 ` Arnd Bergmann
2019-11-12 15:16 ` [PATCH v6 6/8] ALSA: Avoid using timespec for struct snd_timer_tread Arnd Bergmann
2019-11-12 15:16 ` [PATCH v6 7/8] ALSA: move snd_pcm_ioctl_sync_ptr_compat into pcm_native.c Arnd Bergmann
2019-11-12 15:16 ` [PATCH v6 8/8] ALSA: add new 32-bit layout for snd_pcm_mmap_status/control Arnd Bergmann
2019-11-15 15:24 ` Arnd Bergmann
2019-11-12 20:37 ` Takashi Iwai [this message]
2019-11-13 14:32 ` [PATCH v6 0/8] Fix year 2038 issue for sound subsystem Arnd Bergmann
2019-11-13 16:40 ` Takashi Iwai
2019-11-13 16:51 ` Arnd Bergmann
2019-11-13 17:04 ` Takashi Iwai
2019-11-13 17:19 ` Arnd Bergmann
2019-11-13 18:13 ` Takashi Iwai
2019-11-13 20:48 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hk1847rvm.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=arnd@arndb.de \
--cc=baolin.wang7@gmail.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=y2038@lists.linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).