From: Mathieu Desnoyers via lttng-dev <lttng-dev@lists.lttng.org> To: Lukasz Domowy <lukasz.odw39@gmail.com> Cc: lttng-dev <lttng-dev@lists.lttng.org> Subject: Re: lttng_lib_ring_buffer: section 24 reloc 0 sym '': relocation 42 out of range Date: Thu, 28 May 2020 09:31:34 -0400 (EDT) [thread overview] Message-ID: <1946784173.38418.1590672694129.JavaMail.zimbra@efficios.com> (raw) In-Reply-To: <CAGK+5gW_7Lo3O4oYW8jVJqDiUby6xoRyL3-JJQDQ8VYLG7WPAg@mail.gmail.com> ----- On May 28, 2020, at 7:51 AM, lttng-dev lttng-dev@lists.lttng.org wrote: > Hello, > > First - of all: thank you very much for efforts to develop and > maintain LTTng. It's very useful tool! > I used it so far on PowerPC targets and now I try to run it on ARM: > Cyclone5 ARMv7 CPU. > > When trying to run LTTng I get: > > # lttng list --kernel > [ 2012.822578] lttng_lib_ring_buffer: section 24 reloc 0 sym '': > relocation 42 out of range (0x7f05827c -> 0xc0cd7358) > Error: Unable to list kernel events: Kernel tracer not available > Error: Command error > > Do you have any hints how to fix it? Hrm, there is very little handcrafted assembly within the lttng_lib_ring_buffer.ko module. Especially not large chunks of handcrafted assembly. I suspect a compiler issue. From a freshly booted system, if you issue "modprobe lttng_lib_ring_buffer", so you get the same error ? Also, what is your exact compiler version ? Thanks, Mathieu > > I found https://bugs.lttng.org/issues/1173 but enabling > CONFIG_ARM_MODULE_PLTS did not help. > > I use LTTng from Yocto 3.0.2 with custom kernel 4.14.134-rt63-rt: > > # lttng -V > lttng (LTTng Trace Control) 2.10.7 - KeKriek > > All options recommended from documentation are enabled: > root@cyclone5:~# zcat /proc/config.gz | grep -i modules > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" > CONFIG_MODULES_USE_ELF_REL=y > CONFIG_MODULES=y > CONFIG_MODULES_TREE_LOOKUP=y > # Xtables combined modules > # User Modules And Translation Layers > root@cyclone5:~# zcat /proc/config.gz | grep -i kallsyms > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set > CONFIG_KALLSYMS_BASE_RELATIVE=y > root@cyclone5:~# zcat /proc/config.gz | grep -i high_res_timers > CONFIG_HIGH_RES_TIMERS=y > root@cyclone5:~# zcat /proc/config.gz | grep -i tracepoints > CONFIG_TRACEPOINTS=y > CONFIG_HAVE_SYSCALL_TRACEPOINTS=y > > Thank you in advance! > > Best regards, > Lukasz > _______________________________________________ > lttng-dev mailing list > lttng-dev@lists.lttng.org > https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev -- Mathieu Desnoyers EfficiOS Inc. http://www.efficios.com
WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Desnoyers via lttng-dev <lttng-dev@lists.lttng.org> To: Lukasz Domowy <lukasz.odw39@gmail.com> Cc: lttng-dev <lttng-dev@lists.lttng.org> Subject: Re: [lttng-dev] lttng_lib_ring_buffer: section 24 reloc 0 sym '': relocation 42 out of range Date: Thu, 28 May 2020 09:31:34 -0400 (EDT) [thread overview] Message-ID: <1946784173.38418.1590672694129.JavaMail.zimbra@efficios.com> (raw) Message-ID: <20200528133134.V9v8kgZdzEEqmuwDWSeKM01KxIs2sOPLGW9hmqlqzD4@z> (raw) In-Reply-To: <CAGK+5gW_7Lo3O4oYW8jVJqDiUby6xoRyL3-JJQDQ8VYLG7WPAg@mail.gmail.com> ----- On May 28, 2020, at 7:51 AM, lttng-dev lttng-dev@lists.lttng.org wrote: > Hello, > > First - of all: thank you very much for efforts to develop and > maintain LTTng. It's very useful tool! > I used it so far on PowerPC targets and now I try to run it on ARM: > Cyclone5 ARMv7 CPU. > > When trying to run LTTng I get: > > # lttng list --kernel > [ 2012.822578] lttng_lib_ring_buffer: section 24 reloc 0 sym '': > relocation 42 out of range (0x7f05827c -> 0xc0cd7358) > Error: Unable to list kernel events: Kernel tracer not available > Error: Command error > > Do you have any hints how to fix it? Hrm, there is very little handcrafted assembly within the lttng_lib_ring_buffer.ko module. Especially not large chunks of handcrafted assembly. I suspect a compiler issue. From a freshly booted system, if you issue "modprobe lttng_lib_ring_buffer", so you get the same error ? Also, what is your exact compiler version ? Thanks, Mathieu > > I found https://bugs.lttng.org/issues/1173 but enabling > CONFIG_ARM_MODULE_PLTS did not help. > > I use LTTng from Yocto 3.0.2 with custom kernel 4.14.134-rt63-rt: > > # lttng -V > lttng (LTTng Trace Control) 2.10.7 - KeKriek > > All options recommended from documentation are enabled: > root@cyclone5:~# zcat /proc/config.gz | grep -i modules > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" > CONFIG_MODULES_USE_ELF_REL=y > CONFIG_MODULES=y > CONFIG_MODULES_TREE_LOOKUP=y > # Xtables combined modules > # User Modules And Translation Layers > root@cyclone5:~# zcat /proc/config.gz | grep -i kallsyms > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set > CONFIG_KALLSYMS_BASE_RELATIVE=y > root@cyclone5:~# zcat /proc/config.gz | grep -i high_res_timers > CONFIG_HIGH_RES_TIMERS=y > root@cyclone5:~# zcat /proc/config.gz | grep -i tracepoints > CONFIG_TRACEPOINTS=y > CONFIG_HAVE_SYSCALL_TRACEPOINTS=y > > Thank you in advance! > > Best regards, > Lukasz > _______________________________________________ > lttng-dev mailing list > lttng-dev@lists.lttng.org > https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev -- Mathieu Desnoyers EfficiOS Inc. http://www.efficios.com _______________________________________________ lttng-dev mailing list lttng-dev@lists.lttng.org https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
next prev parent reply other threads:[~2020-05-28 13:31 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-28 11:51 lttng_lib_ring_buffer: section 24 reloc 0 sym '': relocation 42 out of range Lukasz Domowy via lttng-dev 2020-05-28 11:51 ` [lttng-dev] " Lukasz Domowy via lttng-dev 2020-05-28 13:31 ` Jonathan Rajotte-Julien via lttng-dev 2020-05-28 13:31 ` [lttng-dev] " Jonathan Rajotte-Julien via lttng-dev 2020-05-28 13:31 ` Mathieu Desnoyers via lttng-dev [this message] 2020-05-28 13:31 ` Mathieu Desnoyers via lttng-dev
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1946784173.38418.1590672694129.JavaMail.zimbra@efficios.com \ --to=lttng-dev@lists.lttng.org \ --cc=lukasz.odw39@gmail.com \ --cc=mathieu.desnoyers@efficios.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).