* [patch 18/20] ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
@ 2016-09-19 22:12 akpm
0 siblings, 0 replies; 2+ messages in thread
From: akpm @ 2016-09-19 22:12 UTC (permalink / raw)
To: torvalds, mm-commits, akpm, ashish.samant, jlbec, joseph.qi,
junxiao.bi, mfasheh, saar.maoz, srinivas.eeda, stable, zren
From: Ashish Samant <ashish.samant@oracle.com>
Subject: ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
If we punch a hole on a reflink such that following conditions are met:
1. start offset is on a cluster boundary
2. end offset is not on a cluster boundary
3. (end offset is somewhere in another extent) or
(hole range > MAX_CONTIG_BYTES(1MB)),
we dont COW the first cluster starting at the start offset. But in
this case, we were wrongly passing this cluster to
ocfs2_zero_range_for_truncate() to zero out. This will modify the
cluster in place and zero it in the source too.
Fix this by skipping this cluster in such a scenario.
To reproduce:
1. Create a random file of say 10 MB
xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile
2. Reflink it
reflink -f 10MBfile reflnktest
3. Punch a hole at starting at cluster boundary with range greater that
1MB. You can also use a range that will put the end offset in another
extent.
fallocate -p -o 0 -l 1048615 reflnktest
4. sync
5. Check the first cluster in the source file. (It will be zeroed out).
dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C
Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.com
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reported-by: Saar Maoz <saar.maoz@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Eric Ren <zren@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
fs/ocfs2/file.c | 38 ++++++++++++++++++++++++++------------
1 file changed, 26 insertions(+), 12 deletions(-)
diff -puN fs/ocfs2/file.c~ocfs2-fix-start-offset-to-ocfs2_zero_range_for_truncate fs/ocfs2/file.c
--- a/fs/ocfs2/file.c~ocfs2-fix-start-offset-to-ocfs2_zero_range_for_truncate
+++ a/fs/ocfs2/file.c
@@ -1506,7 +1506,8 @@ static int ocfs2_zero_partial_clusters(s
u64 start, u64 len)
{
int ret = 0;
- u64 tmpend, end = start + len;
+ u64 tmpend = 0;
+ u64 end = start + len;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
unsigned int csize = osb->s_clustersize;
handle_t *handle;
@@ -1538,18 +1539,31 @@ static int ocfs2_zero_partial_clusters(s
}
/*
- * We want to get the byte offset of the end of the 1st cluster.
+ * If start is on a cluster boundary and end is somewhere in another
+ * cluster, we have not COWed the cluster starting at start, unless
+ * end is also within the same cluster. So, in this case, we skip this
+ * first call to ocfs2_zero_range_for_truncate() truncate and move on
+ * to the next one.
*/
- tmpend = (u64)osb->s_clustersize + (start & ~(osb->s_clustersize - 1));
- if (tmpend > end)
- tmpend = end;
-
- trace_ocfs2_zero_partial_clusters_range1((unsigned long long)start,
- (unsigned long long)tmpend);
-
- ret = ocfs2_zero_range_for_truncate(inode, handle, start, tmpend);
- if (ret)
- mlog_errno(ret);
+ if ((start & (csize - 1)) != 0) {
+ /*
+ * We want to get the byte offset of the end of the 1st
+ * cluster.
+ */
+ tmpend = (u64)osb->s_clustersize +
+ (start & ~(osb->s_clustersize - 1));
+ if (tmpend > end)
+ tmpend = end;
+
+ trace_ocfs2_zero_partial_clusters_range1(
+ (unsigned long long)start,
+ (unsigned long long)tmpend);
+
+ ret = ocfs2_zero_range_for_truncate(inode, handle, start,
+ tmpend);
+ if (ret)
+ mlog_errno(ret);
+ }
if (tmpend < end) {
/*
_
^ permalink raw reply [flat|nested] 2+ messages in thread
* [patch 18/20] ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
@ 2016-09-19 21:44 akpm
0 siblings, 0 replies; 2+ messages in thread
From: akpm @ 2016-09-19 21:44 UTC (permalink / raw)
To: torvalds, mm-commits, akpm, ashish.samant, jlbec, joseph.qi,
junxiao.bi, mfasheh, saar.maoz, srinivas.eeda, stable, zren
From: Ashish Samant <ashish.samant@oracle.com>
Subject: ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
If we punch a hole on a reflink such that following conditions are met:
1. start offset is on a cluster boundary
2. end offset is not on a cluster boundary
3. (end offset is somewhere in another extent) or
(hole range > MAX_CONTIG_BYTES(1MB)),
we dont COW the first cluster starting at the start offset. But in
this case, we were wrongly passing this cluster to
ocfs2_zero_range_for_truncate() to zero out. This will modify the
cluster in place and zero it in the source too.
Fix this by skipping this cluster in such a scenario.
To reproduce:
1. Create a random file of say 10 MB
xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile
2. Reflink it
reflink -f 10MBfile reflnktest
3. Punch a hole at starting at cluster boundary with range greater that
1MB. You can also use a range that will put the end offset in another
extent.
fallocate -p -o 0 -l 1048615 reflnktest
4. sync
5. Check the first cluster in the source file. (It will be zeroed out).
dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C
Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.com
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reported-by: Saar Maoz <saar.maoz@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Eric Ren <zren@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
fs/ocfs2/file.c | 38 ++++++++++++++++++++++++++------------
1 file changed, 26 insertions(+), 12 deletions(-)
diff -puN fs/ocfs2/file.c~ocfs2-fix-start-offset-to-ocfs2_zero_range_for_truncate fs/ocfs2/file.c
--- a/fs/ocfs2/file.c~ocfs2-fix-start-offset-to-ocfs2_zero_range_for_truncate
+++ a/fs/ocfs2/file.c
@@ -1506,7 +1506,8 @@ static int ocfs2_zero_partial_clusters(s
u64 start, u64 len)
{
int ret = 0;
- u64 tmpend, end = start + len;
+ u64 tmpend = 0;
+ u64 end = start + len;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
unsigned int csize = osb->s_clustersize;
handle_t *handle;
@@ -1538,18 +1539,31 @@ static int ocfs2_zero_partial_clusters(s
}
/*
- * We want to get the byte offset of the end of the 1st cluster.
+ * If start is on a cluster boundary and end is somewhere in another
+ * cluster, we have not COWed the cluster starting at start, unless
+ * end is also within the same cluster. So, in this case, we skip this
+ * first call to ocfs2_zero_range_for_truncate() truncate and move on
+ * to the next one.
*/
- tmpend = (u64)osb->s_clustersize + (start & ~(osb->s_clustersize - 1));
- if (tmpend > end)
- tmpend = end;
-
- trace_ocfs2_zero_partial_clusters_range1((unsigned long long)start,
- (unsigned long long)tmpend);
-
- ret = ocfs2_zero_range_for_truncate(inode, handle, start, tmpend);
- if (ret)
- mlog_errno(ret);
+ if ((start & (csize - 1)) != 0) {
+ /*
+ * We want to get the byte offset of the end of the 1st
+ * cluster.
+ */
+ tmpend = (u64)osb->s_clustersize +
+ (start & ~(osb->s_clustersize - 1));
+ if (tmpend > end)
+ tmpend = end;
+
+ trace_ocfs2_zero_partial_clusters_range1(
+ (unsigned long long)start,
+ (unsigned long long)tmpend);
+
+ ret = ocfs2_zero_range_for_truncate(inode, handle, start,
+ tmpend);
+ if (ret)
+ mlog_errno(ret);
+ }
if (tmpend < end) {
/*
_
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-09-19 22:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-19 22:12 [patch 18/20] ocfs2: fix start offset to ocfs2_zero_range_for_truncate() akpm
-- strict thread matches above, loose matches on Subject: below --
2016-09-19 21:44 akpm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).