netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: andrew@lunn.ch, f.fainelli@gmail.com, vivien.didelot@gmail.com,
	davem@davemloft.net, jakub.kicinski@netronome.com
Cc: netdev@vger.kernel.org, Vladimir Oltean <olteanv@gmail.com>
Subject: [PATCH net-next 3/3] net: dsa: vsc73xx: Make the MTU configurable
Date: Sat, 23 Nov 2019 21:48:44 +0200	[thread overview]
Message-ID: <20191123194844.9508-4-olteanv@gmail.com> (raw)
In-Reply-To: <20191123194844.9508-1-olteanv@gmail.com>

Instead of hardcoding the MTU to the maximum value allowed by the
hardware, obey the value known by the operating system.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
---
 drivers/net/dsa/vitesse-vsc73xx-core.c | 30 +++++++++++++++++---------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index 42c1574d45f2..eed98566e2bf 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -663,16 +663,6 @@ static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
 		      VSC73XX_MAC_CFG_TX_EN |
 		      VSC73XX_MAC_CFG_RX_EN);
 
-	/* Max length, we can do up to 9.6 KiB, so allow that.
-	 * According to application not "VSC7398 Jumbo Frames" setting
-	 * up the MTU to 9.6 KB does not affect the performance on standard
-	 * frames, so just enable it. It is clear from the application note
-	 * that "9.6 kilobytes" == 9600 bytes.
-	 */
-	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
-		      port,
-		      VSC73XX_MAXLEN, 9600);
-
 	/* Flow control for the CPU port:
 	 * Use a zero delay pause frame when pause condition is left
 	 * Obey pause control frames
@@ -1029,6 +1019,24 @@ static void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port,
 	}
 }
 
+static int vsc73xx_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+	struct vsc73xx *vsc = ds->priv;
+
+	return vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
+			     VSC73XX_MAXLEN, new_mtu);
+}
+
+/* According to application not "VSC7398 Jumbo Frames" setting
+ * up the MTU to 9.6 KB does not affect the performance on standard
+ * frames. It is clear from the application note that
+ * "9.6 kilobytes" == 9600 bytes.
+ */
+static int vsc73xx_get_max_mtu(struct dsa_switch *ds, int port)
+{
+	return 9600;
+}
+
 static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.get_tag_protocol = vsc73xx_get_tag_protocol,
 	.setup = vsc73xx_setup,
@@ -1040,6 +1048,8 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.get_sset_count = vsc73xx_get_sset_count,
 	.port_enable = vsc73xx_port_enable,
 	.port_disable = vsc73xx_port_disable,
+	.change_mtu = vsc73xx_change_mtu,
+	.get_max_mtu = vsc73xx_get_max_mtu,
 };
 
 static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
-- 
2.17.1


      parent reply	other threads:[~2019-11-23 19:49 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-23 19:48 [PATCH net-next 0/3] Configure the MTU on DSA switches Vladimir Oltean
2019-11-23 19:48 ` [PATCH net-next 1/3] net: dsa: Configure the MTU for switch ports Vladimir Oltean
2019-11-23 20:27   ` Florian Fainelli
2019-11-23 20:46     ` Vladimir Oltean
2019-11-23 21:14       ` Florian Fainelli
2019-11-23 21:29         ` Vladimir Oltean
2019-11-23 21:47           ` Florian Fainelli
2019-11-23 21:54             ` Vladimir Oltean
2019-11-24 22:43       ` Andrew Lunn
2019-11-23 20:51     ` Vladimir Oltean
2019-11-23 21:09       ` Florian Fainelli
2019-11-24 22:48   ` Andrew Lunn
2019-11-23 19:48 ` [PATCH net-next 2/3] net: dsa: sja1105: Implement the port MTU callbacks Vladimir Oltean
2019-11-23 20:30   ` Florian Fainelli
2019-11-23 20:48     ` Vladimir Oltean
2019-11-23 19:48 ` Vladimir Oltean [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191123194844.9508-4-olteanv@gmail.com \
    --to=olteanv@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=jakub.kicinski@netronome.com \
    --cc=netdev@vger.kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).