* [PATCH net-next] doc/netlink/specs: Add vlan attr in rt_link spec
@ 2024-03-08 4:15 Hangbin Liu
2024-03-08 13:05 ` Donald Hunter
0 siblings, 1 reply; 3+ messages in thread
From: Hangbin Liu @ 2024-03-08 4:15 UTC (permalink / raw)
To: netdev
Cc: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Donald Hunter, Hangbin Liu, Jacob Keller, Jiri Pirko
With command:
# ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "eno1.2"}'
Before:
Exception: No message format for 'vlan' in sub-message spec 'linkinfo-data-msg'
After:
'linkinfo': {'data': {'flag': {'flags': {'bridge-binding',
'gvrp',
'reorder-hdr'},
'mask': 4294967295},
'id': 2,
'protocol': 129},
'kind': 'vlan'},
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
Not sure if there is a proper way to show the mask and protocol
---
Documentation/netlink/specs/rt_link.yaml | 69 ++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/Documentation/netlink/specs/rt_link.yaml b/Documentation/netlink/specs/rt_link.yaml
index 8e4d19adee8c..5559ea18ccc7 100644
--- a/Documentation/netlink/specs/rt_link.yaml
+++ b/Documentation/netlink/specs/rt_link.yaml
@@ -729,6 +729,42 @@ definitions:
-
name: filter-mask
type: u32
+ -
+ name: ifla-vlan-flags
+ type: struct
+ members:
+ -
+ name: flags
+ type: u32
+ enum: vlan-flags
+ enum-as-flags: true
+ -
+ name: mask
+ type: u32
+ -
+ name: vlan-flags
+ type: flags
+ entries:
+ -
+ name: reorder-hdr
+ -
+ name: gvrp
+ -
+ name: loose-binding
+ -
+ name: mvrp
+ -
+ name: bridge-binding
+ -
+ name: ifla-vlan-qos-mapping
+ type: struct
+ members:
+ -
+ name: from
+ type: u32
+ -
+ name: to
+ type: u32
attribute-sets:
@@ -1507,6 +1543,36 @@ attribute-sets:
-
name: num-disabled-queues
type: u32
+ -
+ name: linkinfo-vlan-attrs
+ name-prefix: ifla-vlan-
+ attributes:
+ -
+ name: id
+ type: u16
+ -
+ name: flag
+ type: binary
+ struct: ifla-vlan-flags
+ -
+ name: egress-qos
+ type: nest
+ nested-attributes: ifla-vlan-qos
+ -
+ name: ingress-qos
+ type: nest
+ nested-attributes: ifla-vlan-qos
+ -
+ name: protocol
+ type: u16
+ -
+ name: ifla-vlan-qos
+ name-prefix: ifla-vlan-qos
+ attributes:
+ -
+ name: mapping
+ type: binary
+ struct: ifla-vlan-qos-mapping
-
name: linkinfo-vrf-attrs
name-prefix: ifla-vrf-
@@ -1666,6 +1732,9 @@ sub-messages:
-
value: tun
attribute-set: linkinfo-tun-attrs
+ -
+ value: vlan
+ attribute-set: linkinfo-vlan-attrs
-
value: vrf
attribute-set: linkinfo-vrf-attrs
--
2.43.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH net-next] doc/netlink/specs: Add vlan attr in rt_link spec
2024-03-08 4:15 [PATCH net-next] doc/netlink/specs: Add vlan attr in rt_link spec Hangbin Liu
@ 2024-03-08 13:05 ` Donald Hunter
2024-03-11 10:08 ` Hangbin Liu
0 siblings, 1 reply; 3+ messages in thread
From: Donald Hunter @ 2024-03-08 13:05 UTC (permalink / raw)
To: Hangbin Liu
Cc: netdev, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Jacob Keller, Jiri Pirko
Hangbin Liu <liuhangbin@gmail.com> writes:
> With command:
> # ./tools/net/ynl/cli.py \
> --spec Documentation/netlink/specs/rt_link.yaml \
> --do getlink --json '{"ifname": "eno1.2"}'
>
> Before:
> Exception: No message format for 'vlan' in sub-message spec 'linkinfo-data-msg'
>
> After:
> 'linkinfo': {'data': {'flag': {'flags': {'bridge-binding',
> 'gvrp',
> 'reorder-hdr'},
> 'mask': 4294967295},
> 'id': 2,
> 'protocol': 129},
> 'kind': 'vlan'},
>
> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
> ---
> Not sure if there is a proper way to show the mask and protocol
Using display-hint, e.g. display-hint: hex, is intended to tell the ynl
cli to render output in a human readable way. Unfortunately it currently
only works for binary attributes.
It can be done like this:
-
name: mask
type: binary
len: 4
display-hint: hex
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "wlan0.8"}' --output-json | jq -C '.linkinfo'
{
"kind": "vlan",
"data": {
"protocol": 33024,
"id": 8,
"flag": {
"flags": [
"reorder-hdr"
],
"mask": "ff ff ff ff"
}
}
}
But it seems wrong to change the struct definition for this. We should
patch ynl to support hex rendering of integers.
For the protocol, you'd need to add an enum of ethernet protocol
numbers, from the info in include/uapi/linux/if_ether.h
> + -
> + name: linkinfo-vlan-attrs
> + name-prefix: ifla-vlan-
> + attributes:
> + -
> + name: id
> + type: u16
> + -
> + name: flag
> + type: binary
> + struct: ifla-vlan-flags
> + -
> + name: egress-qos
> + type: nest
> + nested-attributes: ifla-vlan-qos
> + -
> + name: ingress-qos
> + type: nest
> + nested-attributes: ifla-vlan-qos
> + -
> + name: protocol
> + type: u16
The protocol value is in big endian format, so it is actually 33024
(0x8100) not 129. You need to add byte-order: big-endian
> + -
> + name: ifla-vlan-qos
> + name-prefix: ifla-vlan-qos
> + attributes:
> + -
> + name: mapping
> + type: binary
> + struct: ifla-vlan-qos-mapping
> -
> name: linkinfo-vrf-attrs
> name-prefix: ifla-vrf-
> @@ -1666,6 +1732,9 @@ sub-messages:
> -
> value: tun
> attribute-set: linkinfo-tun-attrs
> + -
> + value: vlan
> + attribute-set: linkinfo-vlan-attrs
> -
> value: vrf
> attribute-set: linkinfo-vrf-attrs
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH net-next] doc/netlink/specs: Add vlan attr in rt_link spec
2024-03-08 13:05 ` Donald Hunter
@ 2024-03-11 10:08 ` Hangbin Liu
0 siblings, 0 replies; 3+ messages in thread
From: Hangbin Liu @ 2024-03-11 10:08 UTC (permalink / raw)
To: Donald Hunter
Cc: netdev, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Jacob Keller, Jiri Pirko
Hi Donald,
On Fri, Mar 08, 2024 at 01:05:45PM +0000, Donald Hunter wrote:
> > Not sure if there is a proper way to show the mask and protocol
>
> Using display-hint, e.g. display-hint: hex, is intended to tell the ynl
> cli to render output in a human readable way. Unfortunately it currently
> only works for binary attributes.
>
> It can be done like this:
>
> -
> name: mask
> type: binary
> len: 4
> display-hint: hex
>
> ./tools/net/ynl/cli.py \
> --spec Documentation/netlink/specs/rt_link.yaml \
> --do getlink --json '{"ifname": "wlan0.8"}' --output-json | jq -C '.linkinfo'
> {
> "kind": "vlan",
> "data": {
> "protocol": 33024,
> "id": 8,
> "flag": {
> "flags": [
> "reorder-hdr"
> ],
> "mask": "ff ff ff ff"
> }
> }
> }
>
> But it seems wrong to change the struct definition for this. We should
> patch ynl to support hex rendering of integers.
I only processed the numbers with hex display hint
diff --git a/tools/net/ynl/lib/ynl.py b/tools/net/ynl/lib/ynl.py
index 2d7fdd903d9e..d92b8ef287a1 100644
--- a/tools/net/ynl/lib/ynl.py
+++ b/tools/net/ynl/lib/ynl.py
@@ -787,7 +787,11 @@ class YnlFamily(SpecFamily):
if m.enum:
value = self._decode_enum(value, m)
elif m.display_hint:
- value = self._formatted_string(value, m.display_hint)
+ if m.type in {'u8', 'u16', 'u32', 'u64', 's32', 's64',
+ 'uint', 'sint'} and m.display_hint == 'hex':
+ value = hex(value)
+ else:
+ value = self._formatted_string(value, m.display_hint)
attrs[m.name] = value
return attrs
And the output looks like:
{
"kind": "vlan",
"data": {
"protocol": "8021q",
"id": 2,
"flag": {
"flags": [
"reorder-hdr"
],
"mask": "0xffffffff"
}
}
}
Do you think if it is enough?
>
> For the protocol, you'd need to add an enum of ethernet protocol
> numbers, from the info in include/uapi/linux/if_ether.h
Thanks, I will add VLAN protocols first.
Hangbin
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-03-11 10:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-03-08 4:15 [PATCH net-next] doc/netlink/specs: Add vlan attr in rt_link spec Hangbin Liu
2024-03-08 13:05 ` Donald Hunter
2024-03-11 10:08 ` Hangbin Liu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).