[PATCH net-next] net: phy: swphy: emulate register MII_ESTATUS

[PATCH net-next] net: phy: swphy: emulate register MII_ESTATUS

[Heiner Kallweit]

When the genphy driver binds to a swphy it will call
genphy_read_abilites that will try to read MII_ESTATUS if BMSR_ESTATEN
is set in MII_BMSR. So far this would read the default value 0xffff
and 1000FD and 1000HD are reported as supported just by chance.
Better add explicit support for emulating MII_ESTATUS.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/swphy.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/phy/swphy.c b/drivers/net/phy/swphy.c
index dad22481d..53c214a22 100644
--- a/drivers/net/phy/swphy.c
+++ b/drivers/net/phy/swphy.c
@@ -22,6 +22,7 @@ struct swmii_regs {
 	u16 bmsr;
 	u16 lpa;
 	u16 lpagb;
+	u16 estat;
 };
 
 enum {
@@ -48,6 +49,7 @@ static const struct swmii_regs speed[] = {
 	[SWMII_SPEED_1000] = {
 		.bmsr  = BMSR_ESTATEN,
 		.lpagb = LPA_1000FULL | LPA_1000HALF,
+		.estat = ESTATUS_1000_TFULL | ESTATUS_1000_THALF,
 	},
 };
 
@@ -56,11 +58,13 @@ static const struct swmii_regs duplex[] = {
 		.bmsr  = BMSR_ESTATEN | BMSR_100HALF,
 		.lpa   = LPA_10HALF | LPA_100HALF,
 		.lpagb = LPA_1000HALF,
+		.estat = ESTATUS_1000_THALF,
 	},
 	[SWMII_DUPLEX_FULL] = {
 		.bmsr  = BMSR_ESTATEN | BMSR_100FULL,
 		.lpa   = LPA_10FULL | LPA_100FULL,
 		.lpagb = LPA_1000FULL,
+		.estat = ESTATUS_1000_TFULL,
 	},
 };
 
@@ -112,6 +116,7 @@ int swphy_read_reg(int reg, const struct fixed_phy_status *state)
 {
 	int speed_index, duplex_index;
 	u16 bmsr = BMSR_ANEGCAPABLE;
+	u16 estat = 0;
 	u16 lpagb = 0;
 	u16 lpa = 0;
 
@@ -125,6 +130,7 @@ int swphy_read_reg(int reg, const struct fixed_phy_status *state)
 	duplex_index = state->duplex ? SWMII_DUPLEX_FULL : SWMII_DUPLEX_HALF;
 
 	bmsr |= speed[speed_index].bmsr & duplex[duplex_index].bmsr;
+	estat |= speed[speed_index].estat & duplex[duplex_index].estat;
 
 	if (state->link) {
 		bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
@@ -151,6 +157,8 @@ int swphy_read_reg(int reg, const struct fixed_phy_status *state)
 		return lpa;
 	case MII_STAT1000:
 		return lpagb;
+	case MII_ESTATUS:
+		return estat;
 
 	/*
 	 * We do not support emulating Clause 45 over Clause 22 register
-- 
2.22.0

Re: [PATCH net-next] net: phy: swphy: emulate register MII_ESTATUS

[Florian Fainelli]

On 8/15/2019 4:19 AM, Heiner Kallweit wrote:
> When the genphy driver binds to a swphy it will call
> genphy_read_abilites that will try to read MII_ESTATUS if BMSR_ESTATEN
> is set in MII_BMSR. So far this would read the default value 0xffff
> and 1000FD and 1000HD are reported as supported just by chance.
> Better add explicit support for emulating MII_ESTATUS.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH net-next] net: phy: swphy: emulate register MII_ESTATUS

[David Miller]

From: Heiner Kallweit <hkallweit1@gmail.com>
Date: Thu, 15 Aug 2019 13:19:22 +0200

> When the genphy driver binds to a swphy it will call
> genphy_read_abilites that will try to read MII_ESTATUS if BMSR_ESTATEN
> is set in MII_BMSR. So far this would read the default value 0xffff
> and 1000FD and 1000HD are reported as supported just by chance.
> Better add explicit support for emulating MII_ESTATUS.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Applied.