[PATCH v7 18/20] firmware: qcom_scm: Use fixed width src vm bitmap

[PATCH v7 18/20] firmware: qcom_scm: Use fixed width src vm bitmap

[Elliot Berman]

The maximum VMID for assign_mem is 63. Use a u64 to represent this
bitmap instead of architecture-dependent "unsigned int" which varies in
size on 32-bit and 64-bit platforms.

Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
---

Note this will have build conflicts with
https://lore.kernel.org/all/20221114-narmstrong-sm8550-upstream-mpss_dsm-v2-2-f7c65d6f0e55@linaro.org/
which would also need an "unsigned int" -> "u64" in struct qcom_mpss_dsm_mem:perms.

 drivers/firmware/qcom_scm.c           | 12 +++++++-----
 drivers/misc/fastrpc.c                |  6 ++++--
 drivers/net/wireless/ath/ath10k/qmi.c |  4 ++--
 drivers/remoteproc/qcom_q6v5_mss.c    |  8 ++++----
 drivers/soc/qcom/rmtfs_mem.c          |  2 +-
 include/linux/qcom_scm.h              |  2 +-
 6 files changed, 19 insertions(+), 15 deletions(-)

diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index cdbfe54c8146..92763dce6477 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -898,7 +898,7 @@ static int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
  * Return negative errno on failure or 0 on success with @srcvm updated.
  */
 int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
-			unsigned int *srcvm,
+			u64 *srcvm,
 			const struct qcom_scm_vmperm *newvm,
 			unsigned int dest_cnt)
 {
@@ -915,9 +915,9 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
 	__le32 *src;
 	void *ptr;
 	int ret, i, b;
-	unsigned long srcvm_bits = *srcvm;
+	u64 srcvm_bits = *srcvm;
 
-	src_sz = hweight_long(srcvm_bits) * sizeof(*src);
+	src_sz = hweight64(srcvm_bits) * sizeof(*src);
 	mem_to_map_sz = sizeof(*mem_to_map);
 	dest_sz = dest_cnt * sizeof(*destvm);
 	ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) +
@@ -930,8 +930,10 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
 	/* Fill source vmid detail */
 	src = ptr;
 	i = 0;
-	for_each_set_bit(b, &srcvm_bits, BITS_PER_LONG)
-		src[i++] = cpu_to_le32(b);
+	for (b = 0; b < BITS_PER_TYPE(u64); b++) {
+		if (srcvm_bits & BIT(b))
+			src[i++] = cpu_to_le32(b);
+	}
 
 	/* Fill details of mem buff to map */
 	mem_to_map = ptr + ALIGN(src_sz, SZ_64);
diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c
index 7ff0b63c25e3..2ad388f99fe1 100644
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -299,11 +299,13 @@ static void fastrpc_free_map(struct kref *ref)
 		if (map->attr & FASTRPC_ATTR_SECUREMAP) {
 			struct qcom_scm_vmperm perm;
 			int err = 0;
+			u64 src;
 
+			src = BIT(map->fl->cctx->vmperms[0].vmid);
 			perm.vmid = QCOM_SCM_VMID_HLOS;
 			perm.perm = QCOM_SCM_PERM_RWX;
 			err = qcom_scm_assign_mem(map->phys, map->size,
-				&(map->fl->cctx->vmperms[0].vmid), &perm, 1);
+				&src, &perm, 1);
 			if (err) {
 				dev_err(map->fl->sctx->dev, "Failed to assign memory phys 0x%llx size 0x%llx err %d",
 						map->phys, map->size, err);
@@ -744,7 +746,7 @@ static int fastrpc_map_create(struct fastrpc_user *fl, int fd,
 		 * If subsystem VMIDs are defined in DTSI, then do
 		 * hyp_assign from HLOS to those VM(s)
 		 */
-		unsigned int perms = BIT(QCOM_SCM_VMID_HLOS);
+		u64 perms = BIT(QCOM_SCM_VMID_HLOS);
 
 		map->attr = attr;
 		err = qcom_scm_assign_mem(map->phys, (u64)map->size, &perms,
diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
index 66cb7a1e628a..6d1d87e1cdde 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.c
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -28,7 +28,7 @@ static int ath10k_qmi_map_msa_permission(struct ath10k_qmi *qmi,
 {
 	struct qcom_scm_vmperm dst_perms[3];
 	struct ath10k *ar = qmi->ar;
-	unsigned int src_perms;
+	u64 src_perms;
 	u32 perm_count;
 	int ret;
 
@@ -60,7 +60,7 @@ static int ath10k_qmi_unmap_msa_permission(struct ath10k_qmi *qmi,
 {
 	struct qcom_scm_vmperm dst_perms;
 	struct ath10k *ar = qmi->ar;
-	unsigned int src_perms;
+	u64 src_perms;
 	int ret;
 
 	src_perms = BIT(QCOM_SCM_VMID_MSS_MSA) | BIT(QCOM_SCM_VMID_WLAN);
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index fddb63cffee0..9e8bde7a7ec4 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -227,8 +227,8 @@ struct q6v5 {
 	bool has_qaccept_regs;
 	bool has_ext_cntl_regs;
 	bool has_vq6;
-	int mpss_perm;
-	int mba_perm;
+	u64 mpss_perm;
+	u64 mba_perm;
 	const char *hexagon_mdt_image;
 	int version;
 };
@@ -404,7 +404,7 @@ static void q6v5_pds_disable(struct q6v5 *qproc, struct device **pds,
 	}
 }
 
-static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm,
+static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, u64 *current_perm,
 				   bool local, bool remote, phys_addr_t addr,
 				   size_t size)
 {
@@ -939,7 +939,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
 	struct page *page;
 	dma_addr_t phys;
 	void *metadata;
-	int mdata_perm;
+	u64 mdata_perm;
 	int xferop_ret;
 	size_t size;
 	void *vaddr;
diff --git a/drivers/soc/qcom/rmtfs_mem.c b/drivers/soc/qcom/rmtfs_mem.c
index 0feaae357821..69991e47aa23 100644
--- a/drivers/soc/qcom/rmtfs_mem.c
+++ b/drivers/soc/qcom/rmtfs_mem.c
@@ -30,7 +30,7 @@ struct qcom_rmtfs_mem {
 
 	unsigned int client_id;
 
-	unsigned int perms;
+	u64 perms;
 };
 
 static ssize_t qcom_rmtfs_mem_show(struct device *dev,
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index f8335644a01a..77f7b5837216 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -96,7 +96,7 @@ extern int qcom_scm_mem_protect_video_var(u32 cp_start, u32 cp_size,
 					  u32 cp_nonpixel_start,
 					  u32 cp_nonpixel_size);
 extern int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
-			       unsigned int *src,
+			       u64 *src,
 			       const struct qcom_scm_vmperm *newvm,
 			       unsigned int dest_cnt);
 
-- 
2.25.1

Re: [PATCH v7 18/20] firmware: qcom_scm: Use fixed width src vm bitmap

[Kalle Valo]

Elliot Berman <quic_eberman@quicinc.com> writes:

> The maximum VMID for assign_mem is 63. Use a u64 to represent this
> bitmap instead of architecture-dependent "unsigned int" which varies in
> size on 32-bit and 64-bit platforms.
>
> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
> ---
>
> Note this will have build conflicts with
> https://lore.kernel.org/all/20221114-narmstrong-sm8550-upstream-mpss_dsm-v2-2-f7c65d6f0e55@linaro.org/
> which would also need an "unsigned int" -> "u64" in struct qcom_mpss_dsm_mem:perms.
>
>  drivers/firmware/qcom_scm.c           | 12 +++++++-----
>  drivers/misc/fastrpc.c                |  6 ++++--
>  drivers/net/wireless/ath/ath10k/qmi.c |  4 ++--

For ath10k:

Acked-by: Kalle Valo <kvalo@kernel.org>

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches