* Cisco aironet 350 problem: Bad MAC enable reason=88, rid=ff10, offset=49392
@ 2014-01-05 22:28 Meelis Roos
0 siblings, 0 replies; only message in thread
From: Meelis Roos @ 2014-01-05 22:28 UTC (permalink / raw)
To: Fabrice Bellet; +Cc: linux-wireless, netdev
I tried to make my X30 use wireless today and found that its 5.2.19
firmware did not support WPA (scan results were fine). Put the card in
another laptop with
Windows, installed Cisco driver, that automatically upgraded the
firmware to 5.60.21. Now the driver seems to think WPA is working. Scan
results are also still there. But trying to enable the MAC on
association gets an error like below (cmd 1 s MAC enable, 2 is MAC
disable).
Googling around shows that people have had this problem already with
5.41 firmware and I saw no solution to it. Are there any docs on
firmware interfaces, or was it just reverse engineered - does anybody
remmeber?
[ 4.610572] airo(): Probing for PCI adapters
[ 4.610881] airo(): Found an MPI350 card
[ 5.579016] airo(eth1): Firmware version 5.60.21
[ 5.579121] airo(eth1): WPA supported.
[ 5.579191] airo(eth1): MAC enabled 00:02:8a:25:27:a8
[ 5.581818] airo(): Finished probing for PCI adapters
[ 110.237510] airo(eth1): link lost (local choice)
[ 114.256285] airo(eth1): cmd:1 status:7f01 rsp0:88 rsp1:ff10 rsp2:c0f0
[ 114.256302] airo(eth1): Bad MAC enable reason=88, rid=ff10, offset=49392
[ 114.256357] airo(eth1): cmd:2 status:7f02 rsp0:0 rsp1:ff10 rsp2:c0f0
[ 114.257493] airo(eth1): cmd:1 status:7f01 rsp0:88 rsp1:ff10 rsp2:c0f0
[ 114.257502] airo(eth1): Bad MAC enable reason=88, rid=ff10, offset=49392
[ 114.257727] airo(eth1): cmd:2 status:7f02 rsp0:0 rsp1:ff10 rsp2:c0f0
[ 114.258856] airo(eth1): cmd:1 status:7f01 rsp0:88 rsp1:ff10 rsp2:c0f0
[ 114.258866] airo(eth1): Bad MAC enable reason=88, rid=ff10, offset=49392
[ 114.259957] airo(eth1): cmd:2 status:7f02 rsp0:0 rsp1:ff10 rsp2:c0f0
[ 114.261153] airo(eth1): cmd:1 status:7f01 rsp0:88 rsp1:ff10 rsp2:c0f0
[ 114.261164] airo(eth1): Bad MAC enable reason=88, rid=ff10, offset=49392
[ 114.261226] airo(eth1): cmd:2 status:7f02 rsp0:0 rsp1:ff10 rsp2:c0f0
[ 114.262232] airo(eth1): cmd:1 status:7f01 rsp0:88 rsp1:ff10 rsp2:c0f0
[ 114.262241] airo(eth1): Bad MAC enable reason=88, rid=ff10, offset=49392
[ 120.270865] airo(eth1): cmd:103 status:7f03 rsp0:0 rsp1:ff10 rsp2:c0f0
[ 128.270296] airo(eth1): cmd:103 status:7f03 rsp0:0 rsp1:ff10 rsp2:c0f0
[ 132.806204] airo(eth1): cmd:2 status:7f02 rsp0:0 rsp1:ff10 rsp2:c0f0
[ 132.817940] airo(eth1): cmd:1 status:7f01 rsp0:88 rsp1:ff10 rsp2:c0f0
[ 132.817959] airo(eth1): Bad MAC enable reason=88, rid=ff10, offset=49392
[ 132.861628] airo(eth1): cmd:3 status:7f03 rsp0:0 rsp1:ff10 rsp2:c0f0
[ 132.862728] airo(eth1): cmd:2 status:7f02 rsp0:0 rsp1:ff10 rsp2:c0f0
[ 132.863799] airo(eth1): cmd:1 status:7f01 rsp0:88 rsp1:ff10 rsp2:c0f0
[ 132.863809] airo(eth1): Bad MAC enable reason=88, rid=ff10, offset=49392
[ 132.867607] airo(eth1): cmd:2 status:7f02 rsp0:0 rsp1:ff10 rsp2:c0f0
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-01-05 22:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-01-05 22:28 Cisco aironet 350 problem: Bad MAC enable reason=88, rid=ff10, offset=49392 Meelis Roos
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).