From: "Duje Mihanović" <duje.mihanovic@skole.hr>
To: "Michael Turquette" <mturquette@baylibre.com>,
"Stephen Boyd" <sboyd@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Duje Mihanović" <duje.mihanovic@skole.hr>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, afaerber@suse.com
Subject: [PATCH v2 4/9] dt-bindings: clock: Add Marvell PXA1908 clock bindings
Date: Thu, 27 Jul 2023 18:29:02 +0200 [thread overview]
Message-ID: <20230727162909.6031-5-duje.mihanovic@skole.hr> (raw)
In-Reply-To: <20230727162909.6031-1-duje.mihanovic@skole.hr>
Add dt bindings and documentation for the Marvell PXA1908 clock
controller.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
.../bindings/clock/marvell,pxa1908.yaml | 47 ++++++++++
include/dt-bindings/clock/marvell,pxa1908.h | 93 +++++++++++++++++++
2 files changed, 140 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
create mode 100644 include/dt-bindings/clock/marvell,pxa1908.h
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
new file mode 100644
index 000000000000..a5af7992b1b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,pxa1908.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA1908 Clock Controllers
+
+maintainers:
+ - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+ The PXA1908 clock subsystem generates and supplies clock to various
+ controllers within the PXA1908 SoC. The PXA1908 contains numerous clock
+ controller blocks, with the ones currently supported being APBC, APBCP, MPMU
+ and APMU roughly corresponding to internal buses.
+
+ All these clock identifiers could be found in <include/dt-bindings/marvell,pxa1908.h>.
+
+properties:
+ compatible:
+ enum:
+ - marvell,pxa1908-apbc
+ - marvell,pxa1908-apbcp
+ - marvell,pxa1908-mpmu
+ - marvell,pxa1908-apmu
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ # APMU block:
+ - |
+ clock-controller@d4282800 {
+ compatible = "marvell,pxa1908-apmu";
+ reg = <0xd4282800 0x400>;
+ #clock-cells = <1>;
+ };
diff --git a/include/dt-bindings/clock/marvell,pxa1908.h b/include/dt-bindings/clock/marvell,pxa1908.h
new file mode 100644
index 000000000000..dbb487baf65f
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,pxa1908.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause */
+#ifndef __DTS_MARVELL_PXA1908_CLOCK_H
+#define __DTS_MARVELL_PXA1908_CLOCK_H
+
+/* plls */
+#define PXA1908_CLK_CLK32 1
+#define PXA1908_CLK_VCTCXO 2
+#define PXA1908_CLK_PLL1_624 3
+#define PXA1908_CLK_PLL1_416 4
+#define PXA1908_CLK_PLL1_499 5
+#define PXA1908_CLK_PLL1_832 6
+#define PXA1908_CLK_PLL1_1248 7
+#define PXA1908_CLK_PLL1_D2 8
+#define PXA1908_CLK_PLL1_D4 9
+#define PXA1908_CLK_PLL1_D8 10
+#define PXA1908_CLK_PLL1_D16 11
+#define PXA1908_CLK_PLL1_D6 12
+#define PXA1908_CLK_PLL1_D12 13
+#define PXA1908_CLK_PLL1_D24 14
+#define PXA1908_CLK_PLL1_D48 15
+#define PXA1908_CLK_PLL1_D96 16
+#define PXA1908_CLK_PLL1_D13 17
+#define PXA1908_CLK_PLL1_32 18
+#define PXA1908_CLK_PLL1_208 19
+#define PXA1908_CLK_PLL1_117 20
+#define PXA1908_CLK_PLL1_416_GATE 21
+#define PXA1908_CLK_PLL1_624_GATE 22
+#define PXA1908_CLK_PLL1_832_GATE 23
+#define PXA1908_CLK_PLL1_1248_GATE 24
+#define PXA1908_CLK_PLL1_D2_GATE 25
+#define PXA1908_CLK_PLL1_499_EN 26
+#define PXA1908_CLK_PLL2VCO 27
+#define PXA1908_CLK_PLL2 28
+#define PXA1908_CLK_PLL2P 29
+#define PXA1908_CLK_PLL2VCODIV3 30
+#define PXA1908_CLK_PLL3VCO 31
+#define PXA1908_CLK_PLL3 32
+#define PXA1908_CLK_PLL3P 33
+#define PXA1908_CLK_PLL3VCODIV3 34
+#define PXA1908_CLK_PLL4VCO 35
+#define PXA1908_CLK_PLL4 36
+#define PXA1908_CLK_PLL4P 37
+#define PXA1908_CLK_PLL4VCODIV3 38
+#define PXA1908_MPMU_NR_CLKS 38
+
+/* apb (apbc) peripherals */
+#define PXA1908_CLK_UART0 1
+#define PXA1908_CLK_UART1 2
+#define PXA1908_CLK_GPIO 3
+#define PXA1908_CLK_PWM0 4
+#define PXA1908_CLK_PWM1 5
+#define PXA1908_CLK_PWM2 6
+#define PXA1908_CLK_PWM3 7
+#define PXA1908_CLK_SSP0 8
+#define PXA1908_CLK_SSP1 9
+#define PXA1908_CLK_IPC_RST 10
+#define PXA1908_CLK_RTC 11
+#define PXA1908_CLK_TWSI0 12
+#define PXA1908_CLK_KPC 13
+#define PXA1908_CLK_SWJTAG 17
+#define PXA1908_CLK_SSP2 20
+#define PXA1908_CLK_TWSI1 25
+#define PXA1908_CLK_THERMAL 28
+#define PXA1908_CLK_TWSI3 29
+#define PXA1908_APBC_NR_CLKS 48
+
+/* apb (apbcp) peripherals */
+#define PXA1908_CLK_UART2 7
+#define PXA1908_CLK_TWSI2 10
+#define PXA1908_CLK_AICER 14
+#define PXA1908_APBCP_NR_CLKS 14
+
+/* axi (apmu) peripherals */
+#define PXA1908_CLK_CCIC1 9
+#define PXA1908_CLK_ISP 14
+#define PXA1908_CLK_GATE_CTRL 16
+#define PXA1908_CLK_DSI1 17
+#define PXA1908_CLK_DISP1 19
+#define PXA1908_CLK_CCIC0 20
+#define PXA1908_CLK_SDH0 21
+#define PXA1908_CLK_SDH1 22
+#define PXA1908_CLK_SDH2 56
+#define PXA1908_CLK_USB 23
+#define PXA1908_CLK_NF 24
+#define PXA1908_CLK_CORE_DEBUG 36
+#define PXA1908_CLK_VPU 41
+#define PXA1908_CLK_GC 81
+#define PXA1908_CLK_GC2D 61
+#define PXA1908_CLK_TRACE 66
+#define PXA1908_CLK_DVC_DFC_DEBUG 81
+#define PXA1908_APMU_NR_CLKS 96
+
+#endif
--
2.41.0
next prev parent reply other threads:[~2023-07-27 16:30 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-27 16:28 [PATCH v2 0/9] Initial Marvell PXA1908 support Duje Mihanović
2023-07-27 16:28 ` [PATCH v2 1/9] gpio: pxa: disable pinctrl calls for MMP_GPIO Duje Mihanović
2023-07-27 16:39 ` Andy Shevchenko
2023-07-27 16:29 ` [PATCH v2 2/9] gpio: pxa: use dynamic allocation of base Duje Mihanović
2023-07-27 16:40 ` Andy Shevchenko
2023-07-30 21:18 ` Duje Mihanović
2023-08-07 13:31 ` Linus Walleij
2023-08-07 13:49 ` Andy Shevchenko
2023-08-07 15:19 ` Duje Mihanović
2023-07-27 16:29 ` [PATCH v2 3/9] clk: mmp: Switch to use struct u32_fract instead of custom one Duje Mihanović
2023-07-27 16:42 ` Andy Shevchenko
2023-07-27 16:29 ` Duje Mihanović [this message]
2023-07-28 7:18 ` [PATCH v2 4/9] dt-bindings: clock: Add Marvell PXA1908 clock bindings Krzysztof Kozlowski
2023-07-30 21:18 ` Duje Mihanović
2023-07-31 7:08 ` Krzysztof Kozlowski
2023-07-27 16:29 ` [PATCH v2 5/9] clk: mmp: Add Marvell PXA1908 clock driver Duje Mihanović
2023-07-27 16:29 ` [PATCH v2 6/9] dt-bindings: marvell: Document PXA1908 SoC Duje Mihanović
2023-07-28 7:19 ` Krzysztof Kozlowski
2023-07-30 21:18 ` Duje Mihanović
2023-07-31 7:09 ` Krzysztof Kozlowski
2023-07-27 16:29 ` [PATCH v2 7/9] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform Duje Mihanović
2023-07-27 16:29 ` [PATCH v2 8/9] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte Duje Mihanović
2023-07-27 16:29 ` [PATCH v2 9/9] MAINTAINERS: add myself as Marvell PXA1908 maintainer Duje Mihanović
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230727162909.6031-5-duje.mihanovic@skole.hr \
--to=duje.mihanovic@skole.hr \
--cc=afaerber@suse.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).