[PATCH v2 1/3] arm64: dts: qcom: sm8250-xiaomi-elish: Fix typos

[PATCH v2 1/3] arm64: dts: qcom: sm8250-xiaomi-elish: Fix typos

[Jianhua Lu]

There are two typos in this dtsi, so fix it.
  classis -> chassis.
  80700000 -> 80600000

Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
---
No changes in v2.

 arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 85e5cf3dc91e..3d4ea428e4cb 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -23,7 +23,7 @@
 /delete-node/ &xbl_aop_mem;
 
 / {
-	classis-type = "tablet";
+	chassis-type = "tablet";
 
 	/* required for bootloader to select correct board */
 	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
@@ -114,7 +114,7 @@ vreg_s6c_0p88: smpc6-regulator {
 	};
 
 	reserved-memory {
-		xbl_aop_mem: xbl-aop@80700000 {
+		xbl_aop_mem: xbl-aop@80600000 {
 			reg = <0x0 0x80600000 0x0 0x260000>;
 			no-map;
 		};
-- 
2.41.0

[PATCH v2 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add pm8150b type-c node

[Jianhua Lu]

Add type-c node to feature otg function.

Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
---
No changes in v2.

 .../dts/qcom/sm8250-xiaomi-elish-common.dtsi  | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 3d4ea428e4cb..ba2119da1979 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8250.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -627,6 +628,37 @@ vol_up_n: vol-up-n-state {
 	};
 };
 
+&pm8150b_typec {
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				pm8150b_role_switch_in: endpoint {
+					remote-endpoint = <&usb_1_role_switch_out>;
+				};
+			};
+		};
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -678,6 +710,10 @@ &usb_1_hsphy {
 	status = "okay";
 };
 
+&usb_1_role_switch_out {
+	remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
 &ufs_mem_hc {
 	vcc-supply = <&vreg_l17a_3p0>;
 	vcc-max-microamp = <800000>;
-- 
2.41.0

Re: [PATCH v2 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add pm8150b type-c node

[Konrad Dybcio]

On 25.11.2023 03:33, Jianhua Lu wrote:
> Add type-c node to feature otg function.
> 
> Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

[PATCH v2 3/3] arm64: dts: qcom: sm8250-xiaomi-elish: Enable usb_1 otg

[Jianhua Lu]

Change dr_mode to otg and set usb_role_swith property to enable
usb otg.

Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
---
Changes in v2:
  1. a new patch that I missed to generate.

 arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index ba2119da1979..6abca574398d 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -696,11 +696,12 @@ &usb_1 {
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	maximum-speed = "high-speed";
 	/* Remove USB3 phy */
 	phys = <&usb_1_hsphy>;
 	phy-names = "usb2-phy";
+	usb-role-switch;
 };
 
 &usb_1_hsphy {
-- 
2.41.0

Re: [PATCH v2 3/3] arm64: dts: qcom: sm8250-xiaomi-elish: Enable usb_1 otg

[Konrad Dybcio]

On 25.11.2023 03:33, Jianhua Lu wrote:
> Change dr_mode to otg and set usb_role_swith property to enable
switch

> usb otg.
> 
> Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> ---
Guess this should be squashed with p1 but okay..

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

Re: [PATCH v2 1/3] arm64: dts: qcom: sm8250-xiaomi-elish: Fix typos

[Konrad Dybcio]

On 25.11.2023 03:33, Jianhua Lu wrote:
> There are two typos in this dtsi, so fix it.
>   classis -> chassis.
>   80700000 -> 80600000
> 
> Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad