From: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> To: <qemu-devel@nongnu.org>, <qemu-arm@nongnu.org>, <eric.auger@redhat.com>, <imammedo@redhat.com> Cc: peter.maydell@linaro.org, sameo@linux.intel.com, ard.biesheuvel@linaro.org, mst@redhat.com, linuxarm@huawei.com, xuwei5@hisilicon.com, shannon.zhaosl@gmail.com, sebastien.boeuf@intel.com, lersek@redhat.com Subject: [Qemu-devel] [PATCH-for-4.2 v11 05/11] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot Date: Wed, 18 Sep 2019 14:06:27 +0100 [thread overview] Message-ID: <20190918130633.4872-6-shameerali.kolothum.thodi@huawei.com> (raw) In-Reply-To: <20190918130633.4872-1-shameerali.kolothum.thodi@huawei.com> This initializes the GED device with base memory and irq, configures ged memory hotplug event and builds the corresponding aml code. With this, both hot and cold plug of device memory is enabled now for Guest with ACPI boot. Memory cold plug support with Guest DT boot is not yet supported. As DSDT table gets changed by this, update bios-tables-test-allowed-diff.h to avoid "make check" failure. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> --- v10--> v11 Update based on Igor's comments, - Invoke build_memory_hotplug_aml() based on ged-event property. --- hw/arm/Kconfig | 2 + hw/arm/virt-acpi-build.c | 21 ++++++++++ hw/arm/virt.c | 59 +++++++++++++++++++++++---- include/hw/arm/virt.h | 4 ++ tests/bios-tables-test-allowed-diff.h | 1 + 5 files changed, 80 insertions(+), 7 deletions(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index 39d285ad3d..c6e7782580 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -22,6 +22,8 @@ config ARM_VIRT select ACPI_PCI select MEM_DEVICE select DIMM + select ACPI_MEMORY_HOTPLUG + select ACPI_HW_REDUCED config CHEETAH bool diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index 6cdf156cf5..cadeea0f41 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -39,6 +39,8 @@ #include "hw/acpi/aml-build.h" #include "hw/acpi/utils.h" #include "hw/acpi/pci.h" +#include "hw/acpi/memory_hotplug.h" +#include "hw/acpi/generic_event_device.h" #include "hw/pci/pcie_host.h" #include "hw/pci/pci.h" #include "hw/arm/virt.h" @@ -708,6 +710,7 @@ static void build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) { Aml *scope, *dsdt; + MachineState *ms = MACHINE(vms); const MemMapEntry *memmap = vms->memmap; const int *irqmap = vms->irqmap; @@ -732,6 +735,24 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) vms->highmem, vms->highmem_ecam); acpi_dsdt_add_gpio(scope, &memmap[VIRT_GPIO], (irqmap[VIRT_GPIO] + ARM_SPI_BASE)); + if (vms->acpi_dev) { + build_ged_aml(scope, "\\_SB."GED_DEVICE, + HOTPLUG_HANDLER(vms->acpi_dev), + irqmap[VIRT_ACPI_GED] + ARM_SPI_BASE, AML_SYSTEM_MEMORY, + memmap[VIRT_ACPI_GED].base); + } + + if (vms->acpi_dev) { + uint32_t event = object_property_get_uint(OBJECT(vms->acpi_dev), + "ged-event", &error_abort); + + if (event & ACPI_GED_MEM_HOTPLUG_EVT) { + build_memory_hotplug_aml(scope, ms->ram_slots, "\\_SB", NULL, + AML_SYSTEM_MEMORY, + memmap[VIRT_PCDIMM_ACPI].base); + } + } + acpi_dsdt_add_power_button(scope); aml_append(dsdt, scope); diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 1c967e3fee..f926477ba5 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -70,6 +70,7 @@ #include "target/arm/internals.h" #include "hw/mem/pc-dimm.h" #include "hw/mem/nvdimm.h" +#include "hw/acpi/generic_event_device.h" #define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \ static void virt_##major##_##minor##_class_init(ObjectClass *oc, \ @@ -140,6 +141,8 @@ static const MemMapEntry base_memmap[] = { [VIRT_GPIO] = { 0x09030000, 0x00001000 }, [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 }, [VIRT_SMMU] = { 0x09050000, 0x00020000 }, + [VIRT_PCDIMM_ACPI] = { 0x09070000, MEMORY_HOTPLUG_IO_LEN }, + [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -175,6 +178,7 @@ static const int a15irqmap[] = { [VIRT_PCIE] = 3, /* ... to 6 */ [VIRT_GPIO] = 7, [VIRT_SECURE_UART] = 8, + [VIRT_ACPI_GED] = 9, [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */ [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */ [VIRT_SMMU] = 74, /* ...to 74 + NUM_SMMU_IRQS - 1 */ @@ -527,6 +531,29 @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) } } +static inline DeviceState *create_acpi_ged(VirtMachineState *vms, qemu_irq *pic) +{ + DeviceState *dev; + MachineState *ms = MACHINE(vms); + int irq = vms->irqmap[VIRT_ACPI_GED]; + uint32_t event = 0; + + if (ms->ram_slots) { + event = ACPI_GED_MEM_HOTPLUG_EVT; + } + + dev = qdev_create(NULL, TYPE_ACPI_GED); + qdev_prop_set_uint32(dev, "ged-event", event); + + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vms->memmap[VIRT_ACPI_GED].base); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, vms->memmap[VIRT_PCDIMM_ACPI].base); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[irq]); + + qdev_init_nofail(dev); + + return dev; +} + static void create_its(VirtMachineState *vms, DeviceState *gicdev) { const char *itsclass = its_class_name(); @@ -1491,6 +1518,7 @@ static void machvirt_init(MachineState *machine) MemoryRegion *ram = g_new(MemoryRegion, 1); bool firmware_loaded; bool aarch64 = true; + bool has_ged = !vmc->no_ged; unsigned int smp_cpus = machine->smp.cpus; unsigned int max_cpus = machine->smp.max_cpus; @@ -1705,6 +1733,10 @@ static void machvirt_init(MachineState *machine) create_gpio(vms, pic); + if (has_ged && aarch64 && firmware_loaded && acpi_enabled) { + vms->acpi_dev = create_acpi_ged(vms, pic); + } + /* Create mmio transports, so the user can create virtio backends * (which will be automatically plugged in to the transports). If * no backend is created the transport will just sit harmlessly idle. @@ -1881,14 +1913,17 @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) static void virt_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) { + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); + const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); - /* - * The device memory is not yet exposed to the Guest either through - * DT or ACPI and hence both cold/hot plug of memory is explicitly - * disabled for now. - */ - if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { - error_setg(errp, "memory cold/hot plug is not yet supported"); + if (is_nvdimm) { + error_setg(errp, "nvdimm is not yet supported"); + return; + } + + if (!vms->acpi_dev) { + error_setg(errp, + "memory hotplug is not enabled: missing acpi-ged device"); return; } @@ -1898,11 +1933,18 @@ static void virt_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev, static void virt_memory_plug(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) { + HotplugHandlerClass *hhc; VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); Error *local_err = NULL; pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), &local_err); + if (local_err) { + goto out; + } + hhc = HOTPLUG_HANDLER_GET_CLASS(vms->acpi_dev); + hhc->plug(HOTPLUG_HANDLER(vms->acpi_dev), dev, &error_abort); +out: error_propagate(errp, local_err); } @@ -2109,8 +2151,11 @@ DEFINE_VIRT_MACHINE_AS_LATEST(4, 2) static void virt_machine_4_1_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_4_2_options(mc); compat_props_add(mc->compat_props, hw_compat_4_1, hw_compat_4_1_len); + vmc->no_ged = true; } DEFINE_VIRT_MACHINE(4, 1) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index a72094204e..577ee49b4b 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -77,6 +77,8 @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_PCDIMM_ACPI, + VIRT_ACPI_GED, VIRT_LOWMEMMAP_LAST, }; @@ -106,6 +108,7 @@ typedef struct { bool claim_edge_triggered_timers; bool smbios_old_sys_ver; bool no_highmem_ecam; + bool no_ged; /* Machines < 4.2 has no support for ACPI GED device */ } VirtMachineClass; typedef struct { @@ -133,6 +136,7 @@ typedef struct { uint32_t iommu_phandle; int psci_conduit; hwaddr highest_gpa; + DeviceState *acpi_dev; } VirtMachineState; #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM) diff --git a/tests/bios-tables-test-allowed-diff.h b/tests/bios-tables-test-allowed-diff.h index dfb8523c8b..7b4adbc822 100644 --- a/tests/bios-tables-test-allowed-diff.h +++ b/tests/bios-tables-test-allowed-diff.h @@ -1 +1,2 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/DSDT", -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: "Michael S. Tsirkin" <mst@redhat.com> To: qemu-devel@nongnu.org Cc: Peter Maydell <peter.maydell@linaro.org>, Shannon Zhao <shannon.zhaosl@gmail.com>, qemu-arm@nongnu.org, Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>, Igor Mammedov <imammedo@redhat.com> Subject: [PULL 06/19] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot Date: Sat, 5 Oct 2019 17:59:05 -0400 [thread overview] Message-ID: <20190918130633.4872-6-shameerali.kolothum.thodi@huawei.com> (raw) Message-ID: <20191005215905.n5PldSmKcXpoDUskjguUz-B7bnR0yle0Pxf_B3HR2-g@z> (raw) In-Reply-To: <20191005215508.28754-1-mst@redhat.com> From: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> This initializes the GED device with base memory and irq, configures ged memory hotplug event and builds the corresponding aml code. With this, both hot and cold plug of device memory is enabled now for Guest with ACPI boot. Memory cold plug support with Guest DT boot is not yet supported. As DSDT table gets changed by this, update bios-tables-test-allowed-diff.h to avoid "make check" failure. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Message-Id: <20190918130633.4872-6-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> --- hw/arm/Kconfig | 2 + hw/arm/virt-acpi-build.c | 21 ++++++++++ hw/arm/virt.c | 59 +++++++++++++++++++++++---- include/hw/arm/virt.h | 4 ++ tests/bios-tables-test-allowed-diff.h | 1 + 5 files changed, 80 insertions(+), 7 deletions(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index 39d285ad3d..c6e7782580 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -22,6 +22,8 @@ config ARM_VIRT select ACPI_PCI select MEM_DEVICE select DIMM + select ACPI_MEMORY_HOTPLUG + select ACPI_HW_REDUCED config CHEETAH bool diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index 6cdf156cf5..cadeea0f41 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -39,6 +39,8 @@ #include "hw/acpi/aml-build.h" #include "hw/acpi/utils.h" #include "hw/acpi/pci.h" +#include "hw/acpi/memory_hotplug.h" +#include "hw/acpi/generic_event_device.h" #include "hw/pci/pcie_host.h" #include "hw/pci/pci.h" #include "hw/arm/virt.h" @@ -708,6 +710,7 @@ static void build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) { Aml *scope, *dsdt; + MachineState *ms = MACHINE(vms); const MemMapEntry *memmap = vms->memmap; const int *irqmap = vms->irqmap; @@ -732,6 +735,24 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) vms->highmem, vms->highmem_ecam); acpi_dsdt_add_gpio(scope, &memmap[VIRT_GPIO], (irqmap[VIRT_GPIO] + ARM_SPI_BASE)); + if (vms->acpi_dev) { + build_ged_aml(scope, "\\_SB."GED_DEVICE, + HOTPLUG_HANDLER(vms->acpi_dev), + irqmap[VIRT_ACPI_GED] + ARM_SPI_BASE, AML_SYSTEM_MEMORY, + memmap[VIRT_ACPI_GED].base); + } + + if (vms->acpi_dev) { + uint32_t event = object_property_get_uint(OBJECT(vms->acpi_dev), + "ged-event", &error_abort); + + if (event & ACPI_GED_MEM_HOTPLUG_EVT) { + build_memory_hotplug_aml(scope, ms->ram_slots, "\\_SB", NULL, + AML_SYSTEM_MEMORY, + memmap[VIRT_PCDIMM_ACPI].base); + } + } + acpi_dsdt_add_power_button(scope); aml_append(dsdt, scope); diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 1c967e3fee..f926477ba5 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -70,6 +70,7 @@ #include "target/arm/internals.h" #include "hw/mem/pc-dimm.h" #include "hw/mem/nvdimm.h" +#include "hw/acpi/generic_event_device.h" #define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \ static void virt_##major##_##minor##_class_init(ObjectClass *oc, \ @@ -140,6 +141,8 @@ static const MemMapEntry base_memmap[] = { [VIRT_GPIO] = { 0x09030000, 0x00001000 }, [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 }, [VIRT_SMMU] = { 0x09050000, 0x00020000 }, + [VIRT_PCDIMM_ACPI] = { 0x09070000, MEMORY_HOTPLUG_IO_LEN }, + [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -175,6 +178,7 @@ static const int a15irqmap[] = { [VIRT_PCIE] = 3, /* ... to 6 */ [VIRT_GPIO] = 7, [VIRT_SECURE_UART] = 8, + [VIRT_ACPI_GED] = 9, [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */ [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */ [VIRT_SMMU] = 74, /* ...to 74 + NUM_SMMU_IRQS - 1 */ @@ -527,6 +531,29 @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) } } +static inline DeviceState *create_acpi_ged(VirtMachineState *vms, qemu_irq *pic) +{ + DeviceState *dev; + MachineState *ms = MACHINE(vms); + int irq = vms->irqmap[VIRT_ACPI_GED]; + uint32_t event = 0; + + if (ms->ram_slots) { + event = ACPI_GED_MEM_HOTPLUG_EVT; + } + + dev = qdev_create(NULL, TYPE_ACPI_GED); + qdev_prop_set_uint32(dev, "ged-event", event); + + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vms->memmap[VIRT_ACPI_GED].base); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, vms->memmap[VIRT_PCDIMM_ACPI].base); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[irq]); + + qdev_init_nofail(dev); + + return dev; +} + static void create_its(VirtMachineState *vms, DeviceState *gicdev) { const char *itsclass = its_class_name(); @@ -1491,6 +1518,7 @@ static void machvirt_init(MachineState *machine) MemoryRegion *ram = g_new(MemoryRegion, 1); bool firmware_loaded; bool aarch64 = true; + bool has_ged = !vmc->no_ged; unsigned int smp_cpus = machine->smp.cpus; unsigned int max_cpus = machine->smp.max_cpus; @@ -1705,6 +1733,10 @@ static void machvirt_init(MachineState *machine) create_gpio(vms, pic); + if (has_ged && aarch64 && firmware_loaded && acpi_enabled) { + vms->acpi_dev = create_acpi_ged(vms, pic); + } + /* Create mmio transports, so the user can create virtio backends * (which will be automatically plugged in to the transports). If * no backend is created the transport will just sit harmlessly idle. @@ -1881,14 +1913,17 @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) static void virt_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) { + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); + const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); - /* - * The device memory is not yet exposed to the Guest either through - * DT or ACPI and hence both cold/hot plug of memory is explicitly - * disabled for now. - */ - if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { - error_setg(errp, "memory cold/hot plug is not yet supported"); + if (is_nvdimm) { + error_setg(errp, "nvdimm is not yet supported"); + return; + } + + if (!vms->acpi_dev) { + error_setg(errp, + "memory hotplug is not enabled: missing acpi-ged device"); return; } @@ -1898,11 +1933,18 @@ static void virt_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev, static void virt_memory_plug(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) { + HotplugHandlerClass *hhc; VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); Error *local_err = NULL; pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), &local_err); + if (local_err) { + goto out; + } + hhc = HOTPLUG_HANDLER_GET_CLASS(vms->acpi_dev); + hhc->plug(HOTPLUG_HANDLER(vms->acpi_dev), dev, &error_abort); +out: error_propagate(errp, local_err); } @@ -2109,8 +2151,11 @@ DEFINE_VIRT_MACHINE_AS_LATEST(4, 2) static void virt_machine_4_1_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_4_2_options(mc); compat_props_add(mc->compat_props, hw_compat_4_1, hw_compat_4_1_len); + vmc->no_ged = true; } DEFINE_VIRT_MACHINE(4, 1) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index a72094204e..577ee49b4b 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -77,6 +77,8 @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_PCDIMM_ACPI, + VIRT_ACPI_GED, VIRT_LOWMEMMAP_LAST, }; @@ -106,6 +108,7 @@ typedef struct { bool claim_edge_triggered_timers; bool smbios_old_sys_ver; bool no_highmem_ecam; + bool no_ged; /* Machines < 4.2 has no support for ACPI GED device */ } VirtMachineClass; typedef struct { @@ -133,6 +136,7 @@ typedef struct { uint32_t iommu_phandle; int psci_conduit; hwaddr highest_gpa; + DeviceState *acpi_dev; } VirtMachineState; #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM) diff --git a/tests/bios-tables-test-allowed-diff.h b/tests/bios-tables-test-allowed-diff.h index dfb8523c8b..7b4adbc822 100644 --- a/tests/bios-tables-test-allowed-diff.h +++ b/tests/bios-tables-test-allowed-diff.h @@ -1 +1,2 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/DSDT", -- MST
next prev parent reply other threads:[~2019-09-18 13:15 UTC|newest] Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-09-18 13:06 [Qemu-devel] [PATCH-for-4.2 v11 00/11] ARM virt: ACPI memory hotplug support Shameer Kolothum 2019-09-18 13:06 ` [Qemu-devel] [PATCH-for-4.2 v11 01/11] hw/acpi: Make ACPI IO address space configurable Shameer Kolothum 2019-10-05 21:58 ` [PULL 02/19] " Michael S. Tsirkin 2019-09-18 13:06 ` [Qemu-devel] [PATCH-for-4.2 v11 02/11] hw/acpi: Do not create memory hotplug method when handler is not defined Shameer Kolothum 2019-10-05 21:58 ` [PULL 03/19] " Michael S. Tsirkin 2019-09-18 13:06 ` [Qemu-devel] [PATCH-for-4.2 v11 03/11] hw/acpi: Add ACPI Generic Event Device Support Shameer Kolothum 2019-09-25 15:03 ` Igor Mammedov 2019-10-05 21:58 ` [PULL 04/19] " Michael S. Tsirkin 2019-09-18 13:06 ` [Qemu-devel] [PATCH-for-4.2 v11 04/11] hw/arm/virt: Add memory hotplug framework Shameer Kolothum 2019-10-05 21:58 ` [PULL 05/19] " Michael S. Tsirkin 2019-09-18 13:06 ` Shameer Kolothum [this message] 2019-09-25 15:06 ` [PATCH-for-4.2 v11 05/11] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot Igor Mammedov 2019-10-05 21:59 ` [PULL 06/19] " Michael S. Tsirkin 2019-09-18 13:06 ` [Qemu-devel] [PATCH-for-4.2 v11 06/11] hw/arm/virt-acpi-build: Add PC-DIMM in SRAT Shameer Kolothum 2019-10-05 21:59 ` [PULL 07/19] " Michael S. Tsirkin 2019-09-18 13:06 ` [Qemu-devel] [PATCH-for-4.2 v11 07/11] hw/arm: Factor out powerdown notifier from GPIO Shameer Kolothum 2019-10-05 21:59 ` [PULL 08/19] " Michael S. Tsirkin 2019-09-18 13:06 ` [Qemu-devel] [PATCH-for-4.2 v11 08/11] hw/arm: Use GED for system_powerdown event Shameer Kolothum 2019-10-05 21:59 ` [PULL 09/19] " Michael S. Tsirkin 2019-09-18 13:06 ` [Qemu-devel] [PATCH-for-4.2 v11 09/11] docs/specs: Add ACPI GED documentation Shameer Kolothum 2019-09-25 15:09 ` Igor Mammedov 2019-10-05 21:59 ` [PULL 10/19] " Michael S. Tsirkin 2019-09-18 13:06 ` [Qemu-devel] [PATCH-for-4.2 v11 10/11] tests: Update ACPI tables list for upcoming arm/virt tests Shameer Kolothum 2019-09-25 15:11 ` Igor Mammedov 2019-10-05 21:59 ` [PULL 11/19] " Michael S. Tsirkin 2019-09-18 13:06 ` [Qemu-devel] [PATCH-for-4.2 v11 11/11] tests: Add bios tests to arm/virt Shameer Kolothum 2019-09-25 15:26 ` Michael S. Tsirkin 2019-09-25 17:36 ` Igor Mammedov 2019-10-05 21:59 ` [PULL 14/19] " Michael S. Tsirkin 2019-09-19 4:53 ` [Qemu-devel] [PATCH-for-4.2 v11 00/11] ARM virt: ACPI memory hotplug support no-reply 2019-09-19 20:36 ` no-reply 2019-09-20 15:49 ` no-reply 2019-09-25 15:28 ` Michael S. Tsirkin 2019-09-25 15:37 ` Igor Mammedov 2019-09-25 16:20 ` Michael S. Tsirkin 2019-09-27 10:37 ` Peter Maydell 2019-09-25 15:30 ` Michael S. Tsirkin 2019-09-30 10:51 [PATCH v4 0/3] Add virtio-fs Dr. David Alan Gilbert (git) 2019-09-30 10:51 ` [PATCH v4 1/3] virtio: Add virtio_fs linux headers Dr. David Alan Gilbert (git) 2019-10-05 22:00 ` [PULL 17/19] " Michael S. Tsirkin 2019-09-30 10:51 ` [PATCH v4 2/3] virtio: add vhost-user-fs base device Dr. David Alan Gilbert (git) 2019-09-30 11:06 ` Marc-André Lureau 2019-10-01 17:29 ` Dr. David Alan Gilbert 2019-10-02 15:07 ` Marc-André Lureau 2019-10-05 22:00 ` [PULL 18/19] " Michael S. Tsirkin 2019-10-07 5:57 ` Igor Mammedov 2019-10-07 7:28 ` Michael S. Tsirkin 2019-09-30 10:51 ` [PATCH v4 3/3] virtio: add vhost-user-fs-pci device Dr. David Alan Gilbert (git) 2019-10-05 22:00 ` [PULL 19/19] " Michael S. Tsirkin 2019-10-05 21:58 [PULL 00/19] virtio, vhost, acpi: features, fixes, tests Michael S. Tsirkin 2019-09-24 16:20 ` [PATCH v3] vhost-user: save features if the char dev is closed Adrian Moreno 2019-09-25 4:14 ` Jason Wang 2019-10-05 21:58 ` [PULL 01/19] " Michael S. Tsirkin 2019-10-05 21:59 ` [PULL 12/19] tests/acpi: add empty files Michael S. Tsirkin 2019-10-05 21:59 ` [PULL 13/19] tests: allow empty expected files Michael S. Tsirkin 2019-10-05 21:59 ` [PULL 15/19] tests: document how to update acpi tables Michael S. Tsirkin 2019-10-05 21:59 ` [PULL 16/19] tests/acpi: add expected tables for arm/virt Michael S. Tsirkin 2019-10-07 16:31 ` [PULL 00/19] virtio, vhost, acpi: features, fixes, tests Peter Maydell 2019-10-15 21:03 ` Michael S. Tsirkin 2019-10-17 15:48 ` Peter Maydell
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190918130633.4872-6-shameerali.kolothum.thodi@huawei.com \ --to=shameerali.kolothum.thodi@huawei.com \ --cc=ard.biesheuvel@linaro.org \ --cc=eric.auger@redhat.com \ --cc=imammedo@redhat.com \ --cc=lersek@redhat.com \ --cc=linuxarm@huawei.com \ --cc=mst@redhat.com \ --cc=peter.maydell@linaro.org \ --cc=qemu-arm@nongnu.org \ --cc=qemu-devel@nongnu.org \ --cc=sameo@linux.intel.com \ --cc=sebastien.boeuf@intel.com \ --cc=shannon.zhaosl@gmail.com \ --cc=xuwei5@hisilicon.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).