From: frank.chang@sifive.com
To: qemu-devel@nongnu.org, qemu-riscv@nongnu.org
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>,
Frank Chang <frank.chang@sifive.com>,
Bastian Koppelmann <kbastian@mail.uni-paderborn.de>,
Richard Henderson <richard.henderson@linaro.org>,
Alistair Francis <Alistair.Francis@wdc.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
LIU Zhiwei <zhiwei_liu@c-sky.com>
Subject: [RFC v2 71/76] target/riscv: rvv-0.9: widening floating-point/integer type-convert
Date: Wed, 22 Jul 2020 17:16:34 +0800 [thread overview]
Message-ID: <20200722091641.8834-72-frank.chang@sifive.com> (raw)
In-Reply-To: <20200722091641.8834-1-frank.chang@sifive.com>
From: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
---
target/riscv/helper.h | 6 ++++
target/riscv/insn32.decode | 13 +++++---
target/riscv/insn_trans/trans_rvv.inc.c | 43 +++++++++++++++++++++++--
target/riscv/vector_helper.c | 29 ++++++++++++++++-
4 files changed, 83 insertions(+), 8 deletions(-)
diff --git a/target/riscv/helper.h b/target/riscv/helper.h
index d74dbffc21..03330fa332 100644
--- a/target/riscv/helper.h
+++ b/target/riscv/helper.h
@@ -977,12 +977,18 @@ DEF_HELPER_5(vfwcvt_xu_f_v_h, void, ptr, ptr, ptr, env, i32)
DEF_HELPER_5(vfwcvt_xu_f_v_w, void, ptr, ptr, ptr, env, i32)
DEF_HELPER_5(vfwcvt_x_f_v_h, void, ptr, ptr, ptr, env, i32)
DEF_HELPER_5(vfwcvt_x_f_v_w, void, ptr, ptr, ptr, env, i32)
+DEF_HELPER_5(vfwcvt_f_xu_v_b, void, ptr, ptr, ptr, env, i32)
DEF_HELPER_5(vfwcvt_f_xu_v_h, void, ptr, ptr, ptr, env, i32)
DEF_HELPER_5(vfwcvt_f_xu_v_w, void, ptr, ptr, ptr, env, i32)
+DEF_HELPER_5(vfwcvt_f_x_v_b, void, ptr, ptr, ptr, env, i32)
DEF_HELPER_5(vfwcvt_f_x_v_h, void, ptr, ptr, ptr, env, i32)
DEF_HELPER_5(vfwcvt_f_x_v_w, void, ptr, ptr, ptr, env, i32)
DEF_HELPER_5(vfwcvt_f_f_v_h, void, ptr, ptr, ptr, env, i32)
DEF_HELPER_5(vfwcvt_f_f_v_w, void, ptr, ptr, ptr, env, i32)
+DEF_HELPER_5(vfwcvt_rtz_xu_f_v_h, void, ptr, ptr, ptr, env, i32)
+DEF_HELPER_5(vfwcvt_rtz_xu_f_v_w, void, ptr, ptr, ptr, env, i32)
+DEF_HELPER_5(vfwcvt_rtz_x_f_v_h, void, ptr, ptr, ptr, env, i32)
+DEF_HELPER_5(vfwcvt_rtz_x_f_v_w, void, ptr, ptr, ptr, env, i32)
DEF_HELPER_5(vfncvt_xu_f_v_h, void, ptr, ptr, ptr, env, i32)
DEF_HELPER_5(vfncvt_xu_f_v_w, void, ptr, ptr, ptr, env, i32)
diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode
index bc0e44b8ab..55d7a6f338 100644
--- a/target/riscv/insn32.decode
+++ b/target/riscv/insn32.decode
@@ -545,11 +545,14 @@ vfcvt_f_xu_v 010010 . ..... 00010 001 ..... 1010111 @r2_vm
vfcvt_f_x_v 010010 . ..... 00011 001 ..... 1010111 @r2_vm
vfcvt_rtz_xu_f_v 010010 . ..... 00110 001 ..... 1010111 @r2_vm
vfcvt_rtz_x_f_v 010010 . ..... 00111 001 ..... 1010111 @r2_vm
-vfwcvt_xu_f_v 100010 . ..... 01000 001 ..... 1010111 @r2_vm
-vfwcvt_x_f_v 100010 . ..... 01001 001 ..... 1010111 @r2_vm
-vfwcvt_f_xu_v 100010 . ..... 01010 001 ..... 1010111 @r2_vm
-vfwcvt_f_x_v 100010 . ..... 01011 001 ..... 1010111 @r2_vm
-vfwcvt_f_f_v 100010 . ..... 01100 001 ..... 1010111 @r2_vm
+
+vfwcvt_xu_f_v 010010 . ..... 01000 001 ..... 1010111 @r2_vm
+vfwcvt_x_f_v 010010 . ..... 01001 001 ..... 1010111 @r2_vm
+vfwcvt_f_xu_v 010010 . ..... 01010 001 ..... 1010111 @r2_vm
+vfwcvt_f_x_v 010010 . ..... 01011 001 ..... 1010111 @r2_vm
+vfwcvt_f_f_v 010010 . ..... 01100 001 ..... 1010111 @r2_vm
+vfwcvt_rtz_xu_f_v 010010 . ..... 01110 001 ..... 1010111 @r2_vm
+vfwcvt_rtz_x_f_v 010010 . ..... 01111 001 ..... 1010111 @r2_vm
vfncvt_xu_f_v 100010 . ..... 10000 001 ..... 1010111 @r2_vm
vfncvt_x_f_v 100010 . ..... 10001 001 ..... 1010111 @r2_vm
vfncvt_f_xu_v 100010 . ..... 10010 001 ..... 1010111 @r2_vm
diff --git a/target/riscv/insn_trans/trans_rvv.inc.c b/target/riscv/insn_trans/trans_rvv.inc.c
index 6249f9af5b..775811c9f0 100644
--- a/target/riscv/insn_trans/trans_rvv.inc.c
+++ b/target/riscv/insn_trans/trans_rvv.inc.c
@@ -2915,9 +2915,48 @@ static bool trans_##NAME(DisasContext *s, arg_rmr *a) \
GEN_OPFV_WIDEN_TRANS(vfwcvt_xu_f_v)
GEN_OPFV_WIDEN_TRANS(vfwcvt_x_f_v)
-GEN_OPFV_WIDEN_TRANS(vfwcvt_f_xu_v)
-GEN_OPFV_WIDEN_TRANS(vfwcvt_f_x_v)
GEN_OPFV_WIDEN_TRANS(vfwcvt_f_f_v)
+GEN_OPFV_WIDEN_TRANS(vfwcvt_rtz_xu_f_v)
+GEN_OPFV_WIDEN_TRANS(vfwcvt_rtz_x_f_v)
+
+static bool opfxv_widen_check(DisasContext *s, arg_rmr *a)
+{
+ return require_rvv(s) &&
+ vext_check_isa_ill(s) &&
+ /* OPFV widening instructions ignore vs1 check */
+ vext_check_dss(s, a->rd, 0, a->rs2, a->vm, false);
+}
+
+#define GEN_OPFXV_WIDEN_TRANS(NAME) \
+static bool trans_##NAME(DisasContext *s, arg_rmr *a) \
+{ \
+ if (opfxv_widen_check(s, a)) { \
+ uint32_t data = 0; \
+ static gen_helper_gvec_3_ptr * const fns[3] = { \
+ gen_helper_##NAME##_b, \
+ gen_helper_##NAME##_h, \
+ gen_helper_##NAME##_w, \
+ }; \
+ TCGLabel *over = gen_new_label(); \
+ gen_set_rm(s, 7); \
+ tcg_gen_brcondi_tl(TCG_COND_EQ, cpu_vl, 0, over); \
+ \
+ data = FIELD_DP32(data, VDATA, VM, a->vm); \
+ data = FIELD_DP32(data, VDATA, LMUL, s->lmul); \
+ data = FIELD_DP32(data, VDATA, VTA, s->vta); \
+ data = FIELD_DP32(data, VDATA, VMA, s->vma); \
+ tcg_gen_gvec_3_ptr(vreg_ofs(s, a->rd), vreg_ofs(s, 0), \
+ vreg_ofs(s, a->rs2), cpu_env, 0, \
+ s->vlen / 8, data, fns[s->sew]); \
+ mark_vs_dirty(s); \
+ gen_set_label(over); \
+ return true; \
+ } \
+ return false; \
+}
+
+GEN_OPFXV_WIDEN_TRANS(vfwcvt_f_xu_v)
+GEN_OPFXV_WIDEN_TRANS(vfwcvt_f_x_v)
/* Narrowing Floating-Point/Integer Type-Convert Instructions */
diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c
index 4c6755db97..3d12638c4b 100644
--- a/target/riscv/vector_helper.c
+++ b/target/riscv/vector_helper.c
@@ -4302,6 +4302,7 @@ GEN_VEXT_V_ENV(vfcvt_rtz_x_f_v_d, 8, 8, clearq)
/* Widening Floating-Point/Integer Type-Convert Instructions */
/* (TD, T2, TX2) */
+#define WOP_UU_B uint16_t, uint8_t, uint8_t
#define WOP_UU_H uint32_t, uint16_t, uint16_t
#define WOP_UU_W uint64_t, uint32_t, uint32_t
/* vfwcvt.xu.f.v vd, vs2, vm # Convert float to double-width unsigned integer.*/
@@ -4317,19 +4318,45 @@ GEN_VEXT_V_ENV(vfwcvt_x_f_v_h, 2, 4, clearl)
GEN_VEXT_V_ENV(vfwcvt_x_f_v_w, 4, 8, clearq)
/* vfwcvt.f.xu.v vd, vs2, vm # Convert unsigned integer to double-width float */
+RVVCALL(OPFVV1, vfwcvt_f_xu_v_b, WOP_UU_B, H2, H1, uint8_to_float16)
RVVCALL(OPFVV1, vfwcvt_f_xu_v_h, WOP_UU_H, H4, H2, uint16_to_float32)
RVVCALL(OPFVV1, vfwcvt_f_xu_v_w, WOP_UU_W, H8, H4, uint32_to_float64)
+GEN_VEXT_V_ENV(vfwcvt_f_xu_v_b, 1, 2, clearh)
GEN_VEXT_V_ENV(vfwcvt_f_xu_v_h, 2, 4, clearl)
GEN_VEXT_V_ENV(vfwcvt_f_xu_v_w, 4, 8, clearq)
/* vfwcvt.f.x.v vd, vs2, vm # Convert integer to double-width float. */
+RVVCALL(OPFVV1, vfwcvt_f_x_v_b, WOP_UU_B, H2, H1, int8_to_float16)
RVVCALL(OPFVV1, vfwcvt_f_x_v_h, WOP_UU_H, H4, H2, int16_to_float32)
RVVCALL(OPFVV1, vfwcvt_f_x_v_w, WOP_UU_W, H8, H4, int32_to_float64)
+GEN_VEXT_V_ENV(vfwcvt_f_x_v_b, 1, 2, clearh)
GEN_VEXT_V_ENV(vfwcvt_f_x_v_h, 2, 4, clearl)
GEN_VEXT_V_ENV(vfwcvt_f_x_v_w, 4, 8, clearq)
/*
- * vfwcvt.f.f.v vd, vs2, vm #
+ * vfwcvt.rtz.xu.f.v vd, vs2, vm
+ * Convert float to double-width unsigned integer, truncating
+ */
+FCVT_RTZ_F_V(float16, uint32)
+FCVT_RTZ_F_V(float32, uint64)
+RVVCALL(OPFVV1, vfwcvt_rtz_xu_f_v_h, WOP_UU_H, H4, H2, float16_to_uint32_rtz)
+RVVCALL(OPFVV1, vfwcvt_rtz_xu_f_v_w, WOP_UU_W, H8, H4, float32_to_uint64_rtz)
+GEN_VEXT_V_ENV(vfwcvt_rtz_xu_f_v_h, 2, 4, clearl)
+GEN_VEXT_V_ENV(vfwcvt_rtz_xu_f_v_w, 4, 8, clearq)
+
+/*
+ * vfwcvt.rtz.x.f.v vd, vs2, vm
+ * Convert float to double-width signed integer, truncating.
+ */
+FCVT_RTZ_F_V(float16, int32)
+FCVT_RTZ_F_V(float32, int64)
+RVVCALL(OPFVV1, vfwcvt_rtz_x_f_v_h, WOP_UU_H, H4, H2, float16_to_int32_rtz)
+RVVCALL(OPFVV1, vfwcvt_rtz_x_f_v_w, WOP_UU_W, H8, H4, float32_to_int64_rtz)
+GEN_VEXT_V_ENV(vfwcvt_rtz_x_f_v_h, 2, 4, clearl)
+GEN_VEXT_V_ENV(vfwcvt_rtz_x_f_v_w, 4, 8, clearq)
+
+/*
+ * vfwcvt.f.f.v vd, vs2, vm
* Convert single-width float to double-width float.
*/
static uint32_t vfwcvtffv16(uint16_t a, float_status *s)
--
2.17.1
next prev parent reply other threads:[~2020-07-22 9:55 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-22 9:15 [RFC v2 00/76] target/riscv: support vector extension v0.9 frank.chang
2020-07-22 9:15 ` [RFC v2 01/76] target/riscv: drop vector 0.7.1 support frank.chang
2020-07-22 16:37 ` Alistair Francis
2020-07-27 19:54 ` Palmer Dabbelt
2020-07-27 19:55 ` Alistair Francis
2020-07-30 8:07 ` Frank Chang
2020-07-30 12:27 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 02/76] target/riscv: rvv-0.9: support vector 0.9 frank.chang
2020-07-22 16:13 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 03/76] target/riscv: fix rsub gvec tcg_assert_listed_vecop assertion frank.chang
2020-07-22 16:18 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 04/76] target/riscv: correct the gvec IR called in gen_vec_rsub16_i64() frank.chang
2020-07-22 9:15 ` [RFC v2 05/76] target/riscv: fix return value of do_opivx_widen() frank.chang
2020-07-22 9:15 ` [RFC v2 06/76] target/riscv: fix vill bit index in vtype register frank.chang
2020-07-22 9:15 ` [RFC v2 07/76] target/riscv: Use FIELD_EX32() to extract wd field frank.chang
2020-07-22 16:19 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 08/76] target/riscv: rvv-0.9: add mstatus VS field frank.chang
2020-07-22 16:33 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 09/76] target/riscv: rvv-0.9: add sstatus " frank.chang
2020-07-22 16:34 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 10/76] target/riscv: rvv-0.9: add translation-time vector context status frank.chang
2020-07-22 16:53 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 11/76] target/riscv: rvv-0.9: remove vxrm and vxsat fields from fcsr register frank.chang
2020-07-22 16:54 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 12/76] target/riscv: rvv-0.9: add vcsr register frank.chang
2020-07-22 16:57 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 13/76] target/riscv: rvv-0.9: add vlenb register frank.chang
2020-07-22 16:58 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 14/76] target/riscv: rvv-0.9: remove MLEN calculations frank.chang
2020-07-22 17:04 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 15/76] target/riscv: rvv-0.9: add fractional LMUL frank.chang
2020-07-22 17:30 ` Richard Henderson
2020-07-23 2:11 ` Frank Chang
2020-07-22 9:15 ` [RFC v2 16/76] target/riscv: rvv-0.9: add VMA and VTA frank.chang
2020-07-22 18:00 ` Richard Henderson
2020-07-23 2:18 ` Frank Chang
2020-07-22 9:15 ` [RFC v2 17/76] target/riscv: rvv-0.9: update check functions frank.chang
2020-07-22 9:15 ` [RFC v2 18/76] target/riscv: introduce more imm value modes in translator functions frank.chang
2020-07-22 18:08 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 19/76] target/riscv: rvv-0.9: add narrower_nanbox_fpr helper frank.chang
2020-07-22 19:15 ` Richard Henderson
2020-07-23 7:13 ` Frank Chang
2020-07-23 16:14 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 20/76] target/riscv: rvv-0.9: apply narrower nanbox helper in opfvf_trans frank.chang
2020-07-22 9:15 ` [RFC v2 21/76] target/riscv: rvv-0.9: configure instructions frank.chang
2020-07-22 20:00 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 22/76] target/riscv: rvv-0.9: stride load and store instructions frank.chang
2020-07-22 9:15 ` [RFC v2 23/76] target/riscv: rvv-0.9: index " frank.chang
2020-07-22 9:15 ` [RFC v2 24/76] target/riscv: rvv-0.9: fix address index overflow bug of indexed load/store insns frank.chang
2020-07-22 9:15 ` [RFC v2 25/76] target/riscv: rvv-0.9: fault-only-first unit stride load frank.chang
2020-07-22 9:15 ` [RFC v2 26/76] target/riscv: rvv-0.9: amo operations frank.chang
2020-07-22 9:15 ` [RFC v2 27/76] target/riscv: rvv-0.9: load/store whole register instructions frank.chang
2020-07-29 20:30 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 28/76] target/riscv: rvv-0.9: update vext_max_elems() for load/store insns frank.chang
2020-07-30 12:44 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 29/76] target/riscv: rvv-0.9: take fractional LMUL into vector max elements calculation frank.chang
2020-07-30 12:52 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 30/76] target/riscv: rvv-0.9: floating-point square-root instruction frank.chang
2020-07-30 13:02 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 31/76] target/riscv: rvv-0.9: floating-point classify instructions frank.chang
2020-07-30 13:02 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 32/76] target/riscv: rvv-0.9: mask population count instruction frank.chang
2020-07-30 13:05 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 33/76] target/riscv: rvv-0.9: find-first-set mask bit instruction frank.chang
2020-07-30 13:13 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 34/76] target/riscv: rvv-0.9: set-X-first mask bit instructions frank.chang
2020-07-30 13:26 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 35/76] target/riscv: rvv-0.9: iota instruction frank.chang
2020-07-30 13:29 ` Richard Henderson
2020-07-22 9:15 ` [RFC v2 36/76] target/riscv: rvv-0.9: element index instruction frank.chang
2020-07-30 13:30 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 37/76] target/riscv: rvv-0.9: allow load element with sign-extended frank.chang
2020-07-30 13:43 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 38/76] target/riscv: rvv-0.9: register gather instructions frank.chang
2020-07-22 9:16 ` [RFC v2 39/76] target/riscv: rvv-0.9: integer scalar move instructions frank.chang
2020-07-30 14:50 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 40/76] target/riscv: rvv-0.9: floating-point move instruction frank.chang
2020-07-30 19:57 ` Richard Henderson
2020-07-30 20:05 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 41/76] target/riscv: rvv-0.9: floating-point scalar move instructions frank.chang
2020-07-30 20:03 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 42/76] target/riscv: rvv-0.9: whole register " frank.chang
2020-07-30 20:14 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 43/76] target/riscv: rvv-0.9: integer extension instructions frank.chang
2020-07-30 20:35 ` Richard Henderson
2020-07-31 10:17 ` Frank Chang
2020-07-31 17:30 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 44/76] target/riscv: rvv-0.9: single-width averaging add and subtract instructions frank.chang
2020-07-30 20:45 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 45/76] target/riscv: rvv-0.9: single-width bit shift instructions frank.chang
2020-07-30 20:47 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 46/76] target/riscv: rvv-0.9: integer add-with-carry/subtract-with-borrow frank.chang
2020-07-22 9:16 ` [RFC v2 47/76] target/riscv: rvv-0.9: narrowing integer right shift instructions frank.chang
2020-07-30 21:02 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 48/76] target/riscv: rvv-0.9: widening integer multiply-add instructions frank.chang
2020-07-30 21:04 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 49/76] target/riscv: rvv-0.9: quad-widening " frank.chang
2020-07-30 21:19 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 50/76] target/riscv: rvv-0.9: single-width saturating add and subtract instructions frank.chang
2020-07-30 21:24 ` Richard Henderson
2020-08-04 2:40 ` Frank Chang
2020-08-05 16:48 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 51/76] target/riscv: rvv-0.9: integer comparison instructions frank.chang
2020-07-30 21:30 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 52/76] fpu: implement full set compare for fp16 frank.chang
2020-07-22 11:35 ` Alex Bennée
2020-07-22 9:16 ` [RFC v2 53/76] target/riscv: use softfloat lib float16 comparison functions frank.chang
2020-07-30 21:32 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 54/76] target/riscv: rvv-0.9: floating-point compare instructions frank.chang
2020-07-22 9:16 ` [RFC v2 55/76] target/riscv: rvv-0.9: single-width integer reduction instructions frank.chang
2020-07-22 9:16 ` [RFC v2 56/76] target/riscv: rvv-0.9: widening " frank.chang
2020-07-31 15:13 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 57/76] target/riscv: rvv-0.9: mask-register logical instructions frank.chang
2020-07-22 9:16 ` [RFC v2 58/76] target/riscv: rvv-0.9: slide instructions frank.chang
2020-07-31 15:57 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 59/76] target/riscv: rvv-0.9: floating-point " frank.chang
2020-07-31 16:05 ` Richard Henderson
2020-08-03 10:35 ` Frank Chang
2020-08-03 18:57 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 60/76] target/riscv: rvv-0.9: narrowing fixed-point clip instructions frank.chang
2020-07-31 16:07 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 61/76] target/riscv: rvv-0.9: floating-point/integer type-convert instructions frank.chang
2020-07-31 16:32 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 62/76] target/riscv: rvv-0.9: single-width floating-point reduction frank.chang
2020-07-31 16:45 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 63/76] target/riscv: rvv-0.9: widening floating-point reduction instructions frank.chang
2020-07-22 9:16 ` [RFC v2 64/76] target/riscv: rvv-0.9: single-width scaling shift instructions frank.chang
2020-07-31 16:59 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 65/76] target/riscv: rvv-0.9: remove widening saturating scaled multiply-add frank.chang
2020-07-31 17:02 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 66/76] target/riscv: rvv-0.9: remove vmford.vv and vmford.vf frank.chang
2020-07-31 17:03 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 67/76] target/riscv: rvv-0.9: remove integer extract instruction frank.chang
2020-07-31 17:05 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 68/76] fpu: add api to handle alternative sNaN propagation frank.chang
2020-07-22 9:16 ` [RFC v2 69/76] target/riscv: rvv-0.9: floating-point min/max instructions frank.chang
2020-07-22 9:16 ` [RFC v2 70/76] softfloat: add fp16 and uint8/int8 interconvert functions frank.chang
2020-07-22 9:16 ` frank.chang [this message]
2020-07-31 17:10 ` [RFC v2 71/76] target/riscv: rvv-0.9: widening floating-point/integer type-convert Richard Henderson
2020-07-22 9:16 ` [RFC v2 72/76] target/riscv: rvv-0.9: narrowing " frank.chang
2020-07-31 17:18 ` Richard Henderson
2020-07-22 9:16 ` [RFC v2 73/76] fpu: fix float16 nan check frank.chang
2020-07-22 9:16 ` [RFC v2 74/76] target/riscv: gdb: modify gdb csr xml file to align with csr register map frank.chang
2020-07-22 9:16 ` [RFC v2 75/76] target/riscv: gdb: support vector registers for rv64 frank.chang
2020-07-31 17:25 ` Richard Henderson
2020-08-03 11:31 ` Alex Bennée
2020-07-22 9:16 ` [RFC v2 76/76] target/riscv: gdb: support vector registers for rv32 frank.chang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200722091641.8834-72-frank.chang@sifive.com \
--to=frank.chang@sifive.com \
--cc=Alistair.Francis@wdc.com \
--cc=kbastian@mail.uni-paderborn.de \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=sagark@eecs.berkeley.edu \
--cc=zhiwei_liu@c-sky.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).