From: Vladimir Sementsov-Ogievskiy via <qemu-devel@nongnu.org>
To: qemu-block@nongnu.org
Cc: fam@euphon.net, kwolf@redhat.com, vsementsov@virtuozzo.com,
berto@igalia.com, qemu-devel@nongnu.org, mreitz@redhat.com,
stefanha@redhat.com, den@openvz.org
Subject: [PATCH v4 14/16] block/io: support int64_t bytes in bdrv_co_p{read, write}v_part()
Date: Fri, 11 Dec 2020 21:39:32 +0300 [thread overview]
Message-ID: <20201211183934.169161-15-vsementsov@virtuozzo.com> (raw)
In-Reply-To: <20201211183934.169161-1-vsementsov@virtuozzo.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, prepare bdrv_co_preadv_part() and bdrv_co_pwritev_part() and their
remaining dependencies now.
bdrv_pad_request() is updated simultaneously, as pointer to bytes passed
to it both from bdrv_co_pwritev_part() and bdrv_co_preadv_part().
So, all callers of bdrv_pad_request() are updated to pass 64bit bytes.
bdrv_pad_request() is already good for 64bit requests, add
corresponding assertion.
Look at bdrv_co_preadv_part() and bdrv_co_pwritev_part().
Type is widening, so callers are safe. Let's look inside the functions.
In bdrv_co_preadv_part() and bdrv_aligned_pwritev() we only pass bytes
to other already int64_t interfaces (and some obviously safe
calculations), it's OK.
In bdrv_co_do_zero_pwritev() aligned_bytes may become large now, still
it's passed to bdrv_aligned_pwritev which supports int64_t bytes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
include/block/block_int.h | 4 ++--
block/io.c | 14 ++++++++------
block/trace-events | 4 ++--
3 files changed, 12 insertions(+), 10 deletions(-)
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 04c1e5cb58..55b1039872 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -1031,13 +1031,13 @@ int coroutine_fn bdrv_co_preadv(BdrvChild *child,
int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
BdrvRequestFlags flags);
int coroutine_fn bdrv_co_preadv_part(BdrvChild *child,
- int64_t offset, unsigned int bytes,
+ int64_t offset, int64_t bytes,
QEMUIOVector *qiov, size_t qiov_offset, BdrvRequestFlags flags);
int coroutine_fn bdrv_co_pwritev(BdrvChild *child,
int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
BdrvRequestFlags flags);
int coroutine_fn bdrv_co_pwritev_part(BdrvChild *child,
- int64_t offset, unsigned int bytes,
+ int64_t offset, int64_t bytes,
QEMUIOVector *qiov, size_t qiov_offset, BdrvRequestFlags flags);
static inline int coroutine_fn bdrv_co_pread(BdrvChild *child,
diff --git a/block/io.c b/block/io.c
index 93a89a56e3..5200658224 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1697,11 +1697,13 @@ static void bdrv_padding_destroy(BdrvRequestPadding *pad)
*/
static int bdrv_pad_request(BlockDriverState *bs,
QEMUIOVector **qiov, size_t *qiov_offset,
- int64_t *offset, unsigned int *bytes,
+ int64_t *offset, int64_t *bytes,
BdrvRequestPadding *pad, bool *padded)
{
int ret;
+ bdrv_check_qiov_request(*offset, *bytes, *qiov, *qiov_offset, &error_abort);
+
if (!bdrv_init_padding(bs, *offset, *bytes, pad)) {
if (padded) {
*padded = false;
@@ -1736,7 +1738,7 @@ int coroutine_fn bdrv_co_preadv(BdrvChild *child,
}
int coroutine_fn bdrv_co_preadv_part(BdrvChild *child,
- int64_t offset, unsigned int bytes,
+ int64_t offset, int64_t bytes,
QEMUIOVector *qiov, size_t qiov_offset,
BdrvRequestFlags flags)
{
@@ -1745,7 +1747,7 @@ int coroutine_fn bdrv_co_preadv_part(BdrvChild *child,
BdrvRequestPadding pad;
int ret;
- trace_bdrv_co_preadv(bs, offset, bytes, flags);
+ trace_bdrv_co_preadv_part(bs, offset, bytes, flags);
if (!bdrv_is_inserted(bs)) {
return -ENOMEDIUM;
@@ -2089,7 +2091,7 @@ static int coroutine_fn bdrv_aligned_pwritev(BdrvChild *child,
static int coroutine_fn bdrv_co_do_zero_pwritev(BdrvChild *child,
int64_t offset,
- unsigned int bytes,
+ int64_t bytes,
BdrvRequestFlags flags,
BdrvTrackedRequest *req)
{
@@ -2163,7 +2165,7 @@ int coroutine_fn bdrv_co_pwritev(BdrvChild *child,
}
int coroutine_fn bdrv_co_pwritev_part(BdrvChild *child,
- int64_t offset, unsigned int bytes, QEMUIOVector *qiov, size_t qiov_offset,
+ int64_t offset, int64_t bytes, QEMUIOVector *qiov, size_t qiov_offset,
BdrvRequestFlags flags)
{
BlockDriverState *bs = child->bs;
@@ -2173,7 +2175,7 @@ int coroutine_fn bdrv_co_pwritev_part(BdrvChild *child,
int ret;
bool padded = false;
- trace_bdrv_co_pwritev(child->bs, offset, bytes, flags);
+ trace_bdrv_co_pwritev_part(child->bs, offset, bytes, flags);
if (!bdrv_is_inserted(bs)) {
return -ENOMEDIUM;
diff --git a/block/trace-events b/block/trace-events
index a5f6ffb7da..91a0f70575 100644
--- a/block/trace-events
+++ b/block/trace-events
@@ -11,8 +11,8 @@ blk_root_attach(void *child, void *blk, void *bs) "child %p blk %p bs %p"
blk_root_detach(void *child, void *blk, void *bs) "child %p blk %p bs %p"
# io.c
-bdrv_co_preadv(void *bs, int64_t offset, int64_t nbytes, unsigned int flags) "bs %p offset %"PRId64" nbytes %"PRId64" flags 0x%x"
-bdrv_co_pwritev(void *bs, int64_t offset, int64_t nbytes, unsigned int flags) "bs %p offset %"PRId64" nbytes %"PRId64" flags 0x%x"
+bdrv_co_preadv_part(void *bs, int64_t offset, int64_t bytes, unsigned int flags) "bs %p offset %" PRId64 " bytes %" PRId64 " flags 0x%x"
+bdrv_co_pwritev_part(void *bs, int64_t offset, int64_t bytes, unsigned int flags) "bs %p offset %" PRId64 " bytes %" PRId64 " flags 0x%x"
bdrv_co_pwrite_zeroes(void *bs, int64_t offset, int count, int flags) "bs %p offset %"PRId64" count %d flags 0x%x"
bdrv_co_do_copy_on_readv(void *bs, int64_t offset, int64_t bytes, int64_t cluster_offset, int64_t cluster_bytes) "bs %p offset %" PRId64 " bytes %" PRId64 " cluster_offset %" PRId64 " cluster_bytes %" PRId64
bdrv_co_copy_range_from(void *src, uint64_t src_offset, void *dst, uint64_t dst_offset, uint64_t bytes, int read_flags, int write_flags) "src %p offset %"PRIu64" dst %p offset %"PRIu64" bytes %"PRIu64" rw flags 0x%x 0x%x"
--
2.25.4
next prev parent reply other threads:[~2020-12-11 19:12 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-11 18:39 [PATCH v4 00/16] 64bit block-layer: part I Vladimir Sementsov-Ogievskiy
2020-12-11 18:39 ` [PATCH v4 01/16] block: refactor bdrv_check_request: add errp Vladimir Sementsov-Ogievskiy
2021-01-20 22:20 ` Eric Blake
2021-01-22 19:33 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 02/16] util/iov: make qemu_iovec_init_extended() honest Vladimir Sementsov-Ogievskiy
2021-01-21 21:58 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 03/16] block: fix theoretical overflow in bdrv_init_padding() Vladimir Sementsov-Ogievskiy
2021-01-21 22:42 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 04/16] block/io: refactor bdrv_pad_request(): move bdrv_pad_request() up Vladimir Sementsov-Ogievskiy
2021-01-21 22:50 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 05/16] block/io: bdrv_pad_request(): support qemu_iovec_init_extended failure Vladimir Sementsov-Ogievskiy
2021-01-21 22:53 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 06/16] block/throttle-groups: throttle_group_co_io_limits_intercept(): 64bit bytes Vladimir Sementsov-Ogievskiy
2020-12-11 18:39 ` [PATCH v4 07/16] block/io: improve bdrv_check_request: check qiov too Vladimir Sementsov-Ogievskiy
2021-01-22 14:48 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 08/16] block: use int64_t as bytes type in tracked requests Vladimir Sementsov-Ogievskiy
2021-01-22 14:50 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 09/16] block/io: use int64_t bytes in driver wrappers Vladimir Sementsov-Ogievskiy
2021-01-22 16:02 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 10/16] block/io: support int64_t bytes in bdrv_co_do_pwrite_zeroes() Vladimir Sementsov-Ogievskiy
2021-01-22 16:18 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 11/16] block/io: support int64_t bytes in bdrv_aligned_pwritev() Vladimir Sementsov-Ogievskiy
2021-01-22 16:26 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 12/16] block/io: support int64_t bytes in bdrv_co_do_copy_on_readv() Vladimir Sementsov-Ogievskiy
2021-01-22 16:34 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 13/16] block/io: support int64_t bytes in bdrv_aligned_preadv() Vladimir Sementsov-Ogievskiy
2021-01-22 16:54 ` Eric Blake
2021-01-23 14:34 ` Vladimir Sementsov-Ogievskiy
2020-12-11 18:39 ` Vladimir Sementsov-Ogievskiy via [this message]
2021-01-22 17:00 ` [PATCH v4 14/16] block/io: support int64_t bytes in bdrv_co_p{read,write}v_part() Eric Blake
2020-12-11 18:39 ` [PATCH v4 15/16] block/io: support int64_t bytes in read/write wrappers Vladimir Sementsov-Ogievskiy
2021-01-22 17:22 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 16/16] block/io: use int64_t bytes in copy_range Vladimir Sementsov-Ogievskiy
2021-01-22 18:29 ` Eric Blake
2020-12-14 11:51 ` [PATCH v4 00/16] 64bit block-layer: part I Vladimir Sementsov-Ogievskiy
2021-01-09 10:13 ` Vladimir Sementsov-Ogievskiy
2021-02-02 2:56 ` Eric Blake
2021-02-02 6:50 ` Vladimir Sementsov-Ogievskiy
2021-02-02 14:59 ` Eric Blake
2021-02-02 16:13 ` iotest failures in head [was: [PATCH v4 00/16] 64bit block-layer: part I] Eric Blake
2021-02-02 16:23 ` Kevin Wolf
2021-02-02 16:29 ` Vladimir Sementsov-Ogievskiy
2021-02-02 18:50 ` Vladimir Sementsov-Ogievskiy
2021-02-02 22:47 ` Peter Maydell
2021-02-03 10:45 ` Peter Maydell
2021-02-04 15:18 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201211183934.169161-15-vsementsov@virtuozzo.com \
--to=qemu-devel@nongnu.org \
--cc=berto@igalia.com \
--cc=den@openvz.org \
--cc=fam@euphon.net \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=stefanha@redhat.com \
--cc=vsementsov@virtuozzo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).