qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 30/33] tests/qtest: add a test case for pvpanic-pci
Date: Tue, 19 Jan 2021 15:11:01 +0000	[thread overview]
Message-ID: <20210119151104.16264-31-peter.maydell@linaro.org> (raw)
In-Reply-To: <20210119151104.16264-1-peter.maydell@linaro.org>

From: Mihai Carabas <mihai.carabas@oracle.com>

Add a test case for pvpanic-pci device. The scenario is the same as pvpapnic
ISA device, but is using the PCI bus.

Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 tests/qtest/pvpanic-pci-test.c | 62 ++++++++++++++++++++++++++++++++++
 tests/qtest/meson.build        |  1 +
 2 files changed, 63 insertions(+)
 create mode 100644 tests/qtest/pvpanic-pci-test.c

diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c
new file mode 100644
index 00000000000..79b8065619d
--- /dev/null
+++ b/tests/qtest/pvpanic-pci-test.c
@@ -0,0 +1,62 @@
+/*
+ * QTest testcase for PV Panic PCI device
+ *
+ * Copyright (C) 2020 Oracle
+ *
+ * Authors:
+ *     Mihai Carabas <mihai.carabas@oracle.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "libqos/libqtest.h"
+#include "qapi/qmp/qdict.h"
+#include "libqos/pci.h"
+#include "libqos/pci-pc.h"
+#include "hw/pci/pci_regs.h"
+
+static void test_panic(void)
+{
+    uint8_t val;
+    QDict *response, *data;
+    QTestState *qts;
+    QPCIBus *pcibus;
+    QPCIDevice *dev;
+    QPCIBar bar;
+
+    qts = qtest_init("-device pvpanic-pci");
+    pcibus = qpci_new_pc(qts, NULL);
+    dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0));
+    qpci_device_enable(dev);
+    bar = qpci_iomap(dev, 0, NULL);
+
+    qpci_memread(dev, bar, 0, &val, sizeof(val));
+    g_assert_cmpuint(val, ==, 3);
+
+    val = 1;
+    qpci_memwrite(dev, bar, 0, &val, sizeof(val));
+
+    response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED");
+    g_assert(qdict_haskey(response, "data"));
+    data = qdict_get_qdict(response, "data");
+    g_assert(qdict_haskey(data, "action"));
+    g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause");
+    qobject_unref(response);
+
+    qtest_quit(qts);
+}
+
+int main(int argc, char **argv)
+{
+    int ret;
+
+    g_test_init(&argc, &argv, NULL);
+    qtest_add_func("/pvpanic-pci/panic", test_panic);
+
+    ret = g_test_run();
+
+    return ret;
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 0e85343b96b..12e456ce946 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -20,6 +20,7 @@ endif
 
 qtests_pci = \
   (config_all_devices.has_key('CONFIG_VGA') ? ['display-vga-test'] : []) +                  \
+  (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) +          \
   (config_all_devices.has_key('CONFIG_IVSHMEM_DEVICE') ? ['ivshmem-test'] : [])
 
 qtests_i386 = \
-- 
2.20.1



  parent reply	other threads:[~2021-01-19 15:24 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-19 15:10 [PULL 00/33] target-arm queue Peter Maydell
2021-01-19 15:10 ` [PULL 01/33] target/arm: Implement an IMPDEF pauth algorithm Peter Maydell
2021-01-19 15:10 ` [PULL 02/33] target/arm: Add cpu properties to control pauth Peter Maydell
2021-01-19 15:10 ` [PULL 03/33] target/arm: Use object_property_add_bool for "sve" property Peter Maydell
2021-01-19 15:10 ` [PULL 04/33] target/arm: remove redundant tests Peter Maydell
2021-01-19 15:10 ` [PULL 05/33] target/arm: add arm_is_el2_enabled() helper Peter Maydell
2021-01-19 15:10 ` [PULL 06/33] target/arm: use arm_is_el2_enabled() where applicable Peter Maydell
2021-01-19 15:10 ` [PULL 07/33] target/arm: use arm_hcr_el2_eff() " Peter Maydell
2021-01-19 15:10 ` [PULL 08/33] target/arm: factor MDCR_EL2 common handling Peter Maydell
2021-01-19 15:10 ` [PULL 09/33] target/arm: Define isar_feature function to test for presence of SEL2 Peter Maydell
2021-01-19 15:10 ` [PULL 10/33] target/arm: add 64-bit S-EL2 to EL exception table Peter Maydell
2021-01-19 15:10 ` [PULL 11/33] target/arm: add MMU stage 1 for Secure EL2 Peter Maydell
2021-01-19 15:10 ` [PULL 12/33] target/arm: add ARMv8.4-SEL2 system registers Peter Maydell
2021-01-19 15:10 ` [PULL 13/33] target/arm: handle VMID change in secure state Peter Maydell
2021-01-19 15:10 ` [PULL 14/33] target/arm: do S1_ptw_translate() before address space lookup Peter Maydell
2021-01-19 15:10 ` [PULL 15/33] target/arm: translate NS bit in page-walks Peter Maydell
2021-01-19 15:10 ` [PULL 16/33] target/arm: generalize 2-stage page-walk condition Peter Maydell
2021-01-19 15:10 ` [PULL 17/33] target/arm: secure stage 2 translation regime Peter Maydell
2021-01-19 15:10 ` [PULL 18/33] target/arm: set HPFAR_EL2.NS on secure stage 2 faults Peter Maydell
2021-01-19 15:10 ` [PULL 19/33] target/arm: revector to run-time pick target EL Peter Maydell
2021-01-19 15:10 ` [PULL 20/33] target/arm: Implement SCR_EL2.EEL2 Peter Maydell
2021-01-19 15:10 ` [PULL 21/33] target/arm: enable Secure EL2 in max CPU Peter Maydell
2021-01-19 15:10 ` [PULL 22/33] target/arm: refactor vae1_tlbmask() Peter Maydell
2021-01-19 15:10 ` [PULL 23/33] target/arm: Introduce PREDDESC field definitions Peter Maydell
2021-01-19 15:10 ` [PULL 24/33] target/arm: Update PFIRST, PNEXT for pred_desc Peter Maydell
2021-01-19 15:10 ` [PULL 25/33] target/arm: Update ZIP, UZP, TRN " Peter Maydell
2021-01-19 15:10 ` [PULL 26/33] target/arm: Update REV, PUNPK " Peter Maydell
2021-01-19 15:10 ` [PULL 27/33] hw/misc/pvpanic: split-out generic and bus dependent code Peter Maydell
2021-01-19 15:10 ` [PULL 28/33] hw/misc/pvpanic: add PCI interface support Peter Maydell
2021-01-19 15:11 ` [PULL 29/33] pvpanic : update pvpanic spec document Peter Maydell
2021-01-19 15:11 ` Peter Maydell [this message]
2021-01-19 15:11 ` [PULL 31/33] npcm7xx_adc-test: Fix memleak in adc_qom_set Peter Maydell
2021-01-19 15:11 ` [PULL 32/33] target/arm/m_helper: Silence GCC 10 maybe-uninitialized error Peter Maydell
2021-01-19 15:11 ` [PULL 33/33] docs: Build and install all the docs in a single manual Peter Maydell
2021-01-19 16:00 ` [PULL 00/33] target-arm queue no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210119151104.16264-31-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).