From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: laurent@vivier.eu
Subject: [PATCH v2 21/41] target/alpha: Make alpha_cpu_tlb_fill sysemu only
Date: Sat, 18 Sep 2021 11:45:07 -0700 [thread overview]
Message-ID: <20210918184527.408540-22-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210918184527.408540-1-richard.henderson@linaro.org>
The fallback code in raise_sigsegv is sufficient for alpha-linux-user.
Remove the code from cpu_loop that handled EXCP_MMFAULT.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/alpha/cpu.h | 7 ++++---
linux-user/alpha/cpu_loop.c | 8 --------
target/alpha/cpu.c | 2 +-
target/alpha/helper.c | 13 +------------
4 files changed, 6 insertions(+), 24 deletions(-)
diff --git a/target/alpha/cpu.h b/target/alpha/cpu.h
index ce9ec32199..cbca4c369c 100644
--- a/target/alpha/cpu.h
+++ b/target/alpha/cpu.h
@@ -439,9 +439,6 @@ void alpha_translate_init(void);
#define CPU_RESOLVING_TYPE TYPE_ALPHA_CPU
void alpha_cpu_list(void);
-bool alpha_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
- MMUAccessType access_type, int mmu_idx,
- bool probe, uintptr_t retaddr);
void QEMU_NORETURN dynamic_excp(CPUAlphaState *, uintptr_t, int, int);
void QEMU_NORETURN arith_excp(CPUAlphaState *, uintptr_t, int, uint64_t);
@@ -449,12 +446,16 @@ uint64_t cpu_alpha_load_fpcr (CPUAlphaState *env);
void cpu_alpha_store_fpcr (CPUAlphaState *env, uint64_t val);
uint64_t cpu_alpha_load_gr(CPUAlphaState *env, unsigned reg);
void cpu_alpha_store_gr(CPUAlphaState *env, unsigned reg, uint64_t val);
+
#ifndef CONFIG_USER_ONLY
void alpha_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr,
vaddr addr, unsigned size,
MMUAccessType access_type,
int mmu_idx, MemTxAttrs attrs,
MemTxResult response, uintptr_t retaddr);
+bool alpha_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
+ MMUAccessType access_type, int mmu_idx,
+ bool probe, uintptr_t retaddr);
#endif
static inline void cpu_get_tb_cpu_state(CPUAlphaState *env, target_ulong *pc,
diff --git a/linux-user/alpha/cpu_loop.c b/linux-user/alpha/cpu_loop.c
index 7ce2461a02..60b650a827 100644
--- a/linux-user/alpha/cpu_loop.c
+++ b/linux-user/alpha/cpu_loop.c
@@ -52,14 +52,6 @@ void cpu_loop(CPUAlphaState *env)
fprintf(stderr, "External interrupt. Exit\n");
exit(EXIT_FAILURE);
break;
- case EXCP_MMFAULT:
- info.si_signo = TARGET_SIGSEGV;
- info.si_errno = 0;
- info.si_code = (page_get_flags(env->trap_arg0) & PAGE_VALID
- ? TARGET_SEGV_ACCERR : TARGET_SEGV_MAPERR);
- info._sifields._sigfault._addr = env->trap_arg0;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
case EXCP_UNALIGN:
info.si_signo = TARGET_SIGBUS;
info.si_errno = 0;
diff --git a/target/alpha/cpu.c b/target/alpha/cpu.c
index 1ca601cac5..83c201d86a 100644
--- a/target/alpha/cpu.c
+++ b/target/alpha/cpu.c
@@ -220,10 +220,10 @@ static const struct SysemuCPUOps alpha_sysemu_ops = {
static const struct TCGCPUOps alpha_tcg_ops = {
.initialize = alpha_translate_init,
- .tlb_fill = alpha_cpu_tlb_fill,
#ifndef CONFIG_USER_ONLY
.has_work = alpha_cpu_has_work,
+ .tlb_fill = alpha_cpu_tlb_fill,
.cpu_exec_interrupt = alpha_cpu_exec_interrupt,
.do_interrupt = alpha_cpu_do_interrupt,
.do_transaction_failed = alpha_cpu_do_transaction_failed,
diff --git a/target/alpha/helper.c b/target/alpha/helper.c
index 81550d9e2f..266d56ea73 100644
--- a/target/alpha/helper.c
+++ b/target/alpha/helper.c
@@ -119,18 +119,7 @@ void cpu_alpha_store_gr(CPUAlphaState *env, unsigned reg, uint64_t val)
*cpu_alpha_addr_gr(env, reg) = val;
}
-#if defined(CONFIG_USER_ONLY)
-bool alpha_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
- MMUAccessType access_type, int mmu_idx,
- bool probe, uintptr_t retaddr)
-{
- AlphaCPU *cpu = ALPHA_CPU(cs);
-
- cs->exception_index = EXCP_MMFAULT;
- cpu->env.trap_arg0 = address;
- cpu_loop_exit_restore(cs, retaddr);
-}
-#else
+#ifndef CONFIG_USER_ONLY
/* Returns the OSF/1 entMM failure indication, or -1 on success. */
static int get_physical_address(CPUAlphaState *env, target_ulong addr,
int prot_need, int mmu_idx,
--
2.25.1
next prev parent reply other threads:[~2021-09-18 18:54 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-18 18:44 [PATCH v2 00/41] linux-user: Streamline handling of SIGSEGV Richard Henderson
2021-09-18 18:44 ` [PATCH v2 01/41] accel/tcg: Split out adjust_signal_pc Richard Henderson
2021-09-18 18:44 ` [PATCH v2 02/41] accel/tcg: Move clear_helper_retaddr to cpu loop Richard Henderson
2021-09-19 19:35 ` Warner Losh
2021-09-18 18:44 ` [PATCH v2 03/41] accel/tcg: Split out handle_sigsegv_accerr_write Richard Henderson
2021-09-18 18:44 ` [PATCH v2 04/41] accel/tcg: Fold cpu_exit_tb_from_sighandler into caller Richard Henderson
2021-09-18 18:44 ` [PATCH v2 05/41] configure: Merge riscv32 and riscv64 host architectures Richard Henderson
2021-09-19 17:56 ` Philippe Mathieu-Daudé
2021-09-19 22:57 ` Alistair Francis
2021-09-18 18:44 ` [PATCH v2 06/41] linux-user: Reorg handling for SIGSEGV Richard Henderson
2021-09-19 18:02 ` Philippe Mathieu-Daudé
2021-09-19 19:01 ` Warner Losh
2021-09-19 23:01 ` Alistair Francis
2021-09-18 18:44 ` [PATCH v2 07/41] linux-user/host/x86: Populate host_signal.h Richard Henderson
2021-09-18 18:44 ` [PATCH v2 08/41] linux-user/host/ppc: " Richard Henderson
2021-09-19 19:34 ` Warner Losh
2021-09-18 18:44 ` [PATCH v2 09/41] linux-user/host/alpha: " Richard Henderson
2021-09-19 18:03 ` Philippe Mathieu-Daudé
2021-09-19 18:07 ` Richard Henderson
2021-09-19 18:11 ` Philippe Mathieu-Daudé
2021-09-19 18:13 ` Philippe Mathieu-Daudé
2021-09-18 18:44 ` [PATCH v2 10/41] linux-user/host/sparc: " Richard Henderson
2021-09-18 18:44 ` [PATCH v2 11/41] linux-user/host/arm: " Richard Henderson
2021-09-18 18:44 ` [PATCH v2 12/41] linux-user/host/aarch64: " Richard Henderson
2021-09-18 18:44 ` [PATCH v2 13/41] linux-user/host/s390: " Richard Henderson
2021-09-19 18:07 ` Philippe Mathieu-Daudé
2021-09-18 18:45 ` [PATCH v2 14/41] linux-user/host/mips: " Richard Henderson
2021-09-19 18:08 ` Philippe Mathieu-Daudé
2021-09-18 18:45 ` [PATCH v2 15/41] linux-user/host/riscv: " Richard Henderson
2021-09-18 18:45 ` [PATCH v2 16/41] target/arm: Fixup comment re handle_cpu_signal Richard Henderson
2021-09-18 18:45 ` [PATCH v2 17/41] linux-user/host/riscv: Improve host_signal_write Richard Henderson
2021-09-18 18:45 ` [PATCH v2 18/41] linux-user/signal: Drop HOST_SIGNAL_PLACEHOLDER Richard Henderson
2021-09-19 18:18 ` Philippe Mathieu-Daudé
2021-09-19 18:59 ` Warner Losh
2021-09-18 18:45 ` [PATCH v2 19/41] hw/core: Add TCGCPUOps.record_sigsegv Richard Henderson
2021-09-19 18:22 ` Philippe Mathieu-Daudé
2021-09-19 18:24 ` Philippe Mathieu-Daudé
2021-09-19 18:32 ` Richard Henderson
2021-09-18 18:45 ` [PATCH v2 20/41] linux-user: Add raise_sigsegv Richard Henderson
2021-09-19 18:26 ` Philippe Mathieu-Daudé
2021-09-19 18:35 ` Richard Henderson
2021-09-19 18:43 ` Philippe Mathieu-Daudé
2021-09-19 18:53 ` Warner Losh
2021-09-18 18:45 ` Richard Henderson [this message]
2021-09-18 18:45 ` [PATCH v2 22/41] target/arm: Use raise_sigsegv for mte tag lookup Richard Henderson
2021-09-18 18:45 ` [PATCH v2 23/41] target/arm: Implement arm_cpu_record_sigsegv Richard Henderson
2021-09-18 18:45 ` [PATCH v2 24/41] target/cris: Make cris_cpu_tlb_fill sysemu only Richard Henderson
2021-09-19 18:28 ` Philippe Mathieu-Daudé
2021-09-18 18:45 ` [PATCH v2 25/41] target/hexagon: Remove hexagon_cpu_tlb_fill Richard Henderson
2021-09-18 18:45 ` [PATCH v2 26/41] target/hppa: Make hppa_cpu_tlb_fill sysemu only Richard Henderson
2021-09-18 18:45 ` [PATCH v2 27/41] target/i386: Implement x86_cpu_record_sigsegv Richard Henderson
2021-09-19 18:32 ` Philippe Mathieu-Daudé
2021-09-19 18:59 ` Warner Losh
2021-09-18 18:45 ` [PATCH v2 28/41] target/m68k: Make m68k_cpu_tlb_fill sysemu only Richard Henderson
2021-09-18 18:45 ` [PATCH v2 29/41] target/microblaze: Make mb_cpu_tlb_fill " Richard Henderson
2021-09-18 18:45 ` [PATCH v2 30/41] target/mips: Make mips_cpu_tlb_fill " Richard Henderson
2021-09-18 18:45 ` [PATCH v2 31/41] target/nios2: Make nios2_cpu_tlb_fill " Richard Henderson
2021-09-18 18:45 ` [PATCH v2 32/41] linux-user/openrisc: Adjust signal for EXCP_RANGE, EXCP_FPE Richard Henderson
2021-09-18 18:45 ` [PATCH v2 33/41] target/openrisc: Make openrisc_cpu_tlb_fill sysemu only Richard Henderson
2021-09-18 18:45 ` [PATCH v2 34/41] target/ppc: Implement ppc_cpu_record_sigsegv Richard Henderson
2021-09-19 18:37 ` Philippe Mathieu-Daudé
2021-09-18 18:45 ` [PATCH v2 35/41] target/riscv: Make riscv_cpu_tlb_fill sysemu only Richard Henderson
2021-09-18 18:45 ` [PATCH v2 36/41] target/s390x: Use probe_access_flags in s390_probe_access Richard Henderson
2021-09-18 18:45 ` [PATCH v2 37/41] target/s390x: Implement s390_cpu_record_sigsegv Richard Henderson
2021-09-19 18:39 ` Philippe Mathieu-Daudé
2021-09-18 18:45 ` [PATCH v2 38/41] target/sh4: Make sh4_cpu_tlb_fill sysemu only Richard Henderson
2021-09-18 18:45 ` [PATCH v2 39/41] target/sparc: Make sparc_cpu_tlb_fill " Richard Henderson
2021-09-18 18:45 ` [PATCH v2 40/41] target/xtensa: Make xtensa_cpu_tlb_fill " Richard Henderson
2021-09-18 18:45 ` [PATCH v2 41/41] accel/tcg: Restrict TCGCPUOps::tlb_fill() to sysemu Richard Henderson
2021-09-19 18:40 ` Philippe Mathieu-Daudé
2021-09-19 10:38 ` [PATCH v2 00/41] linux-user: Streamline handling of SIGSEGV Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210918184527.408540-22-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=laurent@vivier.eu \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).