From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: laurent@vivier.eu
Subject: [PATCH v2 38/41] target/sh4: Make sh4_cpu_tlb_fill sysemu only
Date: Sat, 18 Sep 2021 11:45:24 -0700 [thread overview]
Message-ID: <20210918184527.408540-39-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210918184527.408540-1-richard.henderson@linaro.org>
The fallback code in raise_sigsegv is sufficient for sh4.
Remove the code from cpu_loop that raised SIGSEGV.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/sh4/cpu.h | 6 +++---
linux-user/sh4/cpu_loop.c | 8 --------
target/sh4/cpu.c | 2 +-
target/sh4/helper.c | 9 +--------
4 files changed, 5 insertions(+), 20 deletions(-)
diff --git a/target/sh4/cpu.h b/target/sh4/cpu.h
index 56f7c32df9..17458587a5 100644
--- a/target/sh4/cpu.h
+++ b/target/sh4/cpu.h
@@ -213,12 +213,12 @@ void superh_cpu_do_unaligned_access(CPUState *cpu, vaddr addr,
int mmu_idx, uintptr_t retaddr);
void sh4_translate_init(void);
+void sh4_cpu_list(void);
+
+#if !defined(CONFIG_USER_ONLY)
bool superh_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
MMUAccessType access_type, int mmu_idx,
bool probe, uintptr_t retaddr);
-
-void sh4_cpu_list(void);
-#if !defined(CONFIG_USER_ONLY)
void superh_cpu_do_interrupt(CPUState *cpu);
bool superh_cpu_exec_interrupt(CPUState *cpu, int int_req);
void cpu_sh4_invalidate_tlb(CPUSH4State *s);
diff --git a/linux-user/sh4/cpu_loop.c b/linux-user/sh4/cpu_loop.c
index 222ed1c670..8408d0c42d 100644
--- a/linux-user/sh4/cpu_loop.c
+++ b/linux-user/sh4/cpu_loop.c
@@ -63,14 +63,6 @@ void cpu_loop(CPUSH4State *env)
info.si_code = TARGET_TRAP_BRKPT;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
- case 0xa0:
- case 0xc0:
- info.si_signo = TARGET_SIGSEGV;
- info.si_errno = 0;
- info.si_code = TARGET_SEGV_MAPERR;
- info._sifields._sigfault._addr = env->tea;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
case EXCP_ATOMIC:
cpu_exec_step_atomic(cs);
arch_interrupt = false;
diff --git a/target/sh4/cpu.c b/target/sh4/cpu.c
index fb2116dc52..0cc1542681 100644
--- a/target/sh4/cpu.c
+++ b/target/sh4/cpu.c
@@ -237,10 +237,10 @@ static const struct SysemuCPUOps sh4_sysemu_ops = {
static const struct TCGCPUOps superh_tcg_ops = {
.initialize = sh4_translate_init,
.synchronize_from_tb = superh_cpu_synchronize_from_tb,
- .tlb_fill = superh_cpu_tlb_fill,
#ifndef CONFIG_USER_ONLY
.has_work = superh_cpu_has_work,
+ .tlb_fill = superh_cpu_tlb_fill,
.cpu_exec_interrupt = superh_cpu_exec_interrupt,
.do_interrupt = superh_cpu_do_interrupt,
.do_unaligned_access = superh_cpu_do_unaligned_access,
diff --git a/target/sh4/helper.c b/target/sh4/helper.c
index 53cb9c3b63..6a620e36fc 100644
--- a/target/sh4/helper.c
+++ b/target/sh4/helper.c
@@ -796,8 +796,6 @@ bool superh_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
return false;
}
-#endif /* !CONFIG_USER_ONLY */
-
bool superh_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
MMUAccessType access_type, int mmu_idx,
bool probe, uintptr_t retaddr)
@@ -806,11 +804,6 @@ bool superh_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
CPUSH4State *env = &cpu->env;
int ret;
-#ifdef CONFIG_USER_ONLY
- ret = (access_type == MMU_DATA_STORE ? MMU_DTLB_VIOLATION_WRITE :
- access_type == MMU_INST_FETCH ? MMU_ITLB_VIOLATION :
- MMU_DTLB_VIOLATION_READ);
-#else
target_ulong physical;
int prot;
@@ -829,7 +822,6 @@ bool superh_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
if (ret != MMU_DTLB_MULTIPLE && ret != MMU_ITLB_MULTIPLE) {
env->pteh = (env->pteh & PTEH_ASID_MASK) | (address & PTEH_VPN_MASK);
}
-#endif
env->tea = address;
switch (ret) {
@@ -868,3 +860,4 @@ bool superh_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
}
cpu_loop_exit_restore(cs, retaddr);
}
+#endif /* !CONFIG_USER_ONLY */
--
2.25.1
next prev parent reply other threads:[~2021-09-18 19:27 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-18 18:44 [PATCH v2 00/41] linux-user: Streamline handling of SIGSEGV Richard Henderson
2021-09-18 18:44 ` [PATCH v2 01/41] accel/tcg: Split out adjust_signal_pc Richard Henderson
2021-09-18 18:44 ` [PATCH v2 02/41] accel/tcg: Move clear_helper_retaddr to cpu loop Richard Henderson
2021-09-19 19:35 ` Warner Losh
2021-09-18 18:44 ` [PATCH v2 03/41] accel/tcg: Split out handle_sigsegv_accerr_write Richard Henderson
2021-09-18 18:44 ` [PATCH v2 04/41] accel/tcg: Fold cpu_exit_tb_from_sighandler into caller Richard Henderson
2021-09-18 18:44 ` [PATCH v2 05/41] configure: Merge riscv32 and riscv64 host architectures Richard Henderson
2021-09-19 17:56 ` Philippe Mathieu-Daudé
2021-09-19 22:57 ` Alistair Francis
2021-09-18 18:44 ` [PATCH v2 06/41] linux-user: Reorg handling for SIGSEGV Richard Henderson
2021-09-19 18:02 ` Philippe Mathieu-Daudé
2021-09-19 19:01 ` Warner Losh
2021-09-19 23:01 ` Alistair Francis
2021-09-18 18:44 ` [PATCH v2 07/41] linux-user/host/x86: Populate host_signal.h Richard Henderson
2021-09-18 18:44 ` [PATCH v2 08/41] linux-user/host/ppc: " Richard Henderson
2021-09-19 19:34 ` Warner Losh
2021-09-18 18:44 ` [PATCH v2 09/41] linux-user/host/alpha: " Richard Henderson
2021-09-19 18:03 ` Philippe Mathieu-Daudé
2021-09-19 18:07 ` Richard Henderson
2021-09-19 18:11 ` Philippe Mathieu-Daudé
2021-09-19 18:13 ` Philippe Mathieu-Daudé
2021-09-18 18:44 ` [PATCH v2 10/41] linux-user/host/sparc: " Richard Henderson
2021-09-18 18:44 ` [PATCH v2 11/41] linux-user/host/arm: " Richard Henderson
2021-09-18 18:44 ` [PATCH v2 12/41] linux-user/host/aarch64: " Richard Henderson
2021-09-18 18:44 ` [PATCH v2 13/41] linux-user/host/s390: " Richard Henderson
2021-09-19 18:07 ` Philippe Mathieu-Daudé
2021-09-18 18:45 ` [PATCH v2 14/41] linux-user/host/mips: " Richard Henderson
2021-09-19 18:08 ` Philippe Mathieu-Daudé
2021-09-18 18:45 ` [PATCH v2 15/41] linux-user/host/riscv: " Richard Henderson
2021-09-18 18:45 ` [PATCH v2 16/41] target/arm: Fixup comment re handle_cpu_signal Richard Henderson
2021-09-18 18:45 ` [PATCH v2 17/41] linux-user/host/riscv: Improve host_signal_write Richard Henderson
2021-09-18 18:45 ` [PATCH v2 18/41] linux-user/signal: Drop HOST_SIGNAL_PLACEHOLDER Richard Henderson
2021-09-19 18:18 ` Philippe Mathieu-Daudé
2021-09-19 18:59 ` Warner Losh
2021-09-18 18:45 ` [PATCH v2 19/41] hw/core: Add TCGCPUOps.record_sigsegv Richard Henderson
2021-09-19 18:22 ` Philippe Mathieu-Daudé
2021-09-19 18:24 ` Philippe Mathieu-Daudé
2021-09-19 18:32 ` Richard Henderson
2021-09-18 18:45 ` [PATCH v2 20/41] linux-user: Add raise_sigsegv Richard Henderson
2021-09-19 18:26 ` Philippe Mathieu-Daudé
2021-09-19 18:35 ` Richard Henderson
2021-09-19 18:43 ` Philippe Mathieu-Daudé
2021-09-19 18:53 ` Warner Losh
2021-09-18 18:45 ` [PATCH v2 21/41] target/alpha: Make alpha_cpu_tlb_fill sysemu only Richard Henderson
2021-09-18 18:45 ` [PATCH v2 22/41] target/arm: Use raise_sigsegv for mte tag lookup Richard Henderson
2021-09-18 18:45 ` [PATCH v2 23/41] target/arm: Implement arm_cpu_record_sigsegv Richard Henderson
2021-09-18 18:45 ` [PATCH v2 24/41] target/cris: Make cris_cpu_tlb_fill sysemu only Richard Henderson
2021-09-19 18:28 ` Philippe Mathieu-Daudé
2021-09-18 18:45 ` [PATCH v2 25/41] target/hexagon: Remove hexagon_cpu_tlb_fill Richard Henderson
2021-09-18 18:45 ` [PATCH v2 26/41] target/hppa: Make hppa_cpu_tlb_fill sysemu only Richard Henderson
2021-09-18 18:45 ` [PATCH v2 27/41] target/i386: Implement x86_cpu_record_sigsegv Richard Henderson
2021-09-19 18:32 ` Philippe Mathieu-Daudé
2021-09-19 18:59 ` Warner Losh
2021-09-18 18:45 ` [PATCH v2 28/41] target/m68k: Make m68k_cpu_tlb_fill sysemu only Richard Henderson
2021-09-18 18:45 ` [PATCH v2 29/41] target/microblaze: Make mb_cpu_tlb_fill " Richard Henderson
2021-09-18 18:45 ` [PATCH v2 30/41] target/mips: Make mips_cpu_tlb_fill " Richard Henderson
2021-09-18 18:45 ` [PATCH v2 31/41] target/nios2: Make nios2_cpu_tlb_fill " Richard Henderson
2021-09-18 18:45 ` [PATCH v2 32/41] linux-user/openrisc: Adjust signal for EXCP_RANGE, EXCP_FPE Richard Henderson
2021-09-18 18:45 ` [PATCH v2 33/41] target/openrisc: Make openrisc_cpu_tlb_fill sysemu only Richard Henderson
2021-09-18 18:45 ` [PATCH v2 34/41] target/ppc: Implement ppc_cpu_record_sigsegv Richard Henderson
2021-09-19 18:37 ` Philippe Mathieu-Daudé
2021-09-18 18:45 ` [PATCH v2 35/41] target/riscv: Make riscv_cpu_tlb_fill sysemu only Richard Henderson
2021-09-18 18:45 ` [PATCH v2 36/41] target/s390x: Use probe_access_flags in s390_probe_access Richard Henderson
2021-09-18 18:45 ` [PATCH v2 37/41] target/s390x: Implement s390_cpu_record_sigsegv Richard Henderson
2021-09-19 18:39 ` Philippe Mathieu-Daudé
2021-09-18 18:45 ` Richard Henderson [this message]
2021-09-18 18:45 ` [PATCH v2 39/41] target/sparc: Make sparc_cpu_tlb_fill sysemu only Richard Henderson
2021-09-18 18:45 ` [PATCH v2 40/41] target/xtensa: Make xtensa_cpu_tlb_fill " Richard Henderson
2021-09-18 18:45 ` [PATCH v2 41/41] accel/tcg: Restrict TCGCPUOps::tlb_fill() to sysemu Richard Henderson
2021-09-19 18:40 ` Philippe Mathieu-Daudé
2021-09-19 10:38 ` [PATCH v2 00/41] linux-user: Streamline handling of SIGSEGV Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210918184527.408540-39-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=laurent@vivier.eu \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).