qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
To: qemu-devel@nongnu.org
Cc: qemu-riscv@nongnu.org, alistair.francis@wdc.com,
	bmeng@tinylab.org, liweiwei@iscas.ac.cn,
	zhiwei_liu@linux.alibaba.com, palmer@rivosinc.com,
	Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Subject: [PATCH v7 11/12] target/riscv: rework write_misa()
Date: Mon, 17 Apr 2023 11:00:12 -0300	[thread overview]
Message-ID: <20230417140013.58893-12-dbarboza@ventanamicro.com> (raw)
In-Reply-To: <20230417140013.58893-1-dbarboza@ventanamicro.com>

write_misa() must use as much common logic as possible. We want to open
code just the bits that are exclusive to the CSR write operation and TCG
internals.

Our validation is done with riscv_cpu_validate_set_extensions(), but we
need a small tweak first. When enabling RVG we're doing:

        env->misa_ext |= RVI | RVM | RVA | RVF | RVD;
        env->misa_ext_mask = env->misa_ext;

This works fine for realize() time but this can potentially overwrite
env->misa_ext_mask if we reutilize the function for write_misa().
Instead of doing misa_ext_mask = misa_ext, sum up the RVG extensions in
misa_ext_mask as well. This won't change realize() time behavior
(misa_ext_mask is still == misa_ext)  and will ensure that write_misa()
won't change misa_ext_mask by accident.

After that, rewrite write_misa() to work as follows:

- mask the write using misa_ext_mask to avoid enabling unsupported
  extensions;

- suppress RVC if the next insn isn't aligned;

- disable RVG if any of RVG dependencies are being disabled by the user;

- assign env->misa_ext and run riscv_cpu_validate_set_extensions(). On
  error, rollback to the previous values of misa_ext and misa_ext_mask;

- on success, check if there's a chance that misa_ext_mask was
  overwritten during the process and restore it;

- handle RVF and MSTATUS_FS and continue as usual.

Let's keep write_misa() as experimental for now until this logic gains
enough mileage.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
---
 target/riscv/cpu.c |  4 ++--
 target/riscv/cpu.h |  1 +
 target/riscv/csr.c | 47 ++++++++++++++++++++--------------------------
 3 files changed, 23 insertions(+), 29 deletions(-)

diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 7d407321aa..4fa720a39d 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -944,7 +944,7 @@ static void riscv_cpu_validate_misa_mxl(RISCVCPU *cpu, Error **errp)
  * Check consistency between chosen extensions while setting
  * cpu->cfg accordingly.
  */
-static void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
+void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
 {
     CPURISCVState *env = &cpu->env;
     Error *local_err = NULL;
@@ -960,7 +960,7 @@ static void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
         cpu->cfg.ext_ifencei = true;
 
         env->misa_ext |= RVI | RVM | RVA | RVF | RVD;
-        env->misa_ext_mask = env->misa_ext;
+        env->misa_ext_mask |= RVI | RVM | RVA | RVF | RVD;
     }
 
     if (riscv_has_ext(env, RVI) && riscv_has_ext(env, RVE)) {
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 15423585d0..1f39edc687 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -548,6 +548,7 @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
                         bool probe, uintptr_t retaddr);
 char *riscv_isa_string(RISCVCPU *cpu);
 void riscv_cpu_list(void);
+void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp);
 
 #define cpu_list riscv_cpu_list
 #define cpu_mmu_index riscv_cpu_mmu_index
diff --git a/target/riscv/csr.c b/target/riscv/csr.c
index 865ee9efda..d449da2657 100644
--- a/target/riscv/csr.c
+++ b/target/riscv/csr.c
@@ -1387,39 +1387,18 @@ static RISCVException read_misa(CPURISCVState *env, int csrno,
 static RISCVException write_misa(CPURISCVState *env, int csrno,
                                  target_ulong val)
 {
+    RISCVCPU *cpu = env_archcpu(env);
+    uint32_t orig_misa_ext = env->misa_ext;
+    Error *local_err = NULL;
+
     if (!riscv_cpu_cfg(env)->misa_w) {
         /* drop write to misa */
         return RISCV_EXCP_NONE;
     }
 
-    /* 'I' or 'E' must be present */
-    if (!(val & (RVI | RVE))) {
-        /* It is not, drop write to misa */
-        return RISCV_EXCP_NONE;
-    }
-
-    /* 'E' excludes all other extensions */
-    if (val & RVE) {
-        /*
-         * when we support 'E' we can do "val = RVE;" however
-         * for now we just drop writes if 'E' is present.
-         */
-        return RISCV_EXCP_NONE;
-    }
-
-    /*
-     * misa.MXL writes are not supported by QEMU.
-     * Drop writes to those bits.
-     */
-
     /* Mask extensions that are not supported by this hart */
     val &= env->misa_ext_mask;
 
-    /* 'D' depends on 'F', so clear 'D' if 'F' is not present */
-    if ((val & RVD) && !(val & RVF)) {
-        val &= ~RVD;
-    }
-
     /*
      * Suppress 'C' if next instruction is not aligned
      * TODO: this should check next_pc
@@ -1428,18 +1407,32 @@ static RISCVException write_misa(CPURISCVState *env, int csrno,
         val &= ~RVC;
     }
 
+    /* Disable RVG if any of its dependencies are disabled */
+    if (!(val & RVI && val & RVM && val & RVA &&
+          val & RVF && val & RVD)) {
+        val &= ~RVG;
+    }
+
     /* If nothing changed, do nothing. */
     if (val == env->misa_ext) {
         return RISCV_EXCP_NONE;
     }
 
-    if (!(val & RVF)) {
+    env->misa_ext = val;
+    riscv_cpu_validate_set_extensions(cpu, &local_err);
+    if (local_err != NULL) {
+        /* Rollback on validation error */
+        env->misa_ext = orig_misa_ext;
+
+        return RISCV_EXCP_NONE;
+    }
+
+    if (!(env->misa_ext & RVF)) {
         env->mstatus &= ~MSTATUS_FS;
     }
 
     /* flush translation cache */
     tb_flush(env_cpu(env));
-    env->misa_ext = val;
     env->xl = riscv_cpu_mxl(env);
     return RISCV_EXCP_NONE;
 }
-- 
2.39.2



  parent reply	other threads:[~2023-04-17 14:04 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-17 14:00 [PATCH v7 00/12] target/riscv: rework CPU extensions validation Daniel Henrique Barboza
2023-04-17 14:00 ` [PATCH v7 01/12] target/riscv/cpu.c: add riscv_cpu_validate_v() Daniel Henrique Barboza
2023-04-19 23:36   ` Alistair Francis
2023-04-17 14:00 ` [PATCH v7 02/12] target/riscv/cpu.c: remove set_vext_version() Daniel Henrique Barboza
2023-04-19 23:37   ` Alistair Francis
2023-04-20  9:12     ` Daniel Henrique Barboza
2023-04-17 14:00 ` [PATCH v7 03/12] target/riscv/cpu.c: remove set_priv_version() Daniel Henrique Barboza
2023-04-17 14:00 ` [PATCH v7 04/12] target/riscv: add PRIV_VERSION_LATEST Daniel Henrique Barboza
2023-04-17 14:00 ` [PATCH v7 05/12] target/riscv: Mask the implicitly enabled extensions in isa_string based on priv version Daniel Henrique Barboza
2023-04-17 14:00 ` [PATCH v7 06/12] target/riscv: Update check for Zca/Zcf/Zcd Daniel Henrique Barboza
2023-04-17 14:00 ` [PATCH v7 07/12] target/riscv/cpu.c: add priv_spec validate/disable_exts helpers Daniel Henrique Barboza
2023-04-17 14:00 ` [PATCH v7 08/12] target/riscv/cpu.c: add riscv_cpu_validate_misa_mxl() Daniel Henrique Barboza
2023-04-17 14:00 ` [PATCH v7 09/12] target/riscv/cpu.c: validate extensions before riscv_timer_init() Daniel Henrique Barboza
2023-04-17 14:00 ` [PATCH v7 10/12] target/riscv/cpu.c: remove cfg setup from riscv_cpu_init() Daniel Henrique Barboza
2023-04-17 14:00 ` Daniel Henrique Barboza [this message]
2023-04-17 14:00 ` [PATCH v7 12/12] target/riscv: forbid write_misa() for static CPUs Daniel Henrique Barboza

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230417140013.58893-12-dbarboza@ventanamicro.com \
    --to=dbarboza@ventanamicro.com \
    --cc=alistair.francis@wdc.com \
    --cc=bmeng@tinylab.org \
    --cc=liweiwei@iscas.ac.cn \
    --cc=palmer@rivosinc.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=zhiwei_liu@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).